|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * FSI hub master driver | 
|  | * | 
|  | * Copyright (C) IBM Corporation 2016 | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/fsi.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include "fsi-master.h" | 
|  |  | 
|  | #define FSI_ENGID_HUB_MASTER		0x1c | 
|  |  | 
|  | #define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */ | 
|  |  | 
|  | /* | 
|  | * FSI hub master support | 
|  | * | 
|  | * A hub master increases the number of potential target devices that the | 
|  | * primary FSI master can access. For each link a primary master supports, | 
|  | * each of those links can in turn be chained to a hub master with multiple | 
|  | * links of its own. | 
|  | * | 
|  | * The hub is controlled by a set of control registers exposed as a regular fsi | 
|  | * device (the hub->upstream device), and provides access to the downstream FSI | 
|  | * bus as through an address range on the slave itself (->addr and ->size). | 
|  | * | 
|  | * [This differs from "cascaded" masters, which expose the entire downstream | 
|  | * bus entirely through the fsi device address range, and so have a smaller | 
|  | * accessible address space.] | 
|  | */ | 
|  | struct fsi_master_hub { | 
|  | struct fsi_master	master; | 
|  | struct fsi_device	*upstream; | 
|  | uint32_t		addr, size;	/* slave-relative addr of */ | 
|  | /* master address space */ | 
|  | }; | 
|  |  | 
|  | #define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master) | 
|  |  | 
|  | static int hub_master_read(struct fsi_master *master, int link, | 
|  | uint8_t id, uint32_t addr, void *val, size_t size) | 
|  | { | 
|  | struct fsi_master_hub *hub = to_fsi_master_hub(master); | 
|  |  | 
|  | if (id != 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | addr += hub->addr + (link * FSI_HUB_LINK_SIZE); | 
|  | return fsi_slave_read(hub->upstream->slave, addr, val, size); | 
|  | } | 
|  |  | 
|  | static int hub_master_write(struct fsi_master *master, int link, | 
|  | uint8_t id, uint32_t addr, const void *val, size_t size) | 
|  | { | 
|  | struct fsi_master_hub *hub = to_fsi_master_hub(master); | 
|  |  | 
|  | if (id != 0) | 
|  | return -EINVAL; | 
|  |  | 
|  | addr += hub->addr + (link * FSI_HUB_LINK_SIZE); | 
|  | return fsi_slave_write(hub->upstream->slave, addr, val, size); | 
|  | } | 
|  |  | 
|  | static int hub_master_break(struct fsi_master *master, int link) | 
|  | { | 
|  | uint32_t addr; | 
|  | __be32 cmd; | 
|  |  | 
|  | addr = 0x4; | 
|  | cmd = cpu_to_be32(0xc0de0000); | 
|  |  | 
|  | return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd)); | 
|  | } | 
|  |  | 
|  | static int hub_master_link_enable(struct fsi_master *master, int link, | 
|  | bool enable) | 
|  | { | 
|  | struct fsi_master_hub *hub = to_fsi_master_hub(master); | 
|  | int idx, bit; | 
|  | __be32 reg; | 
|  | int rc; | 
|  |  | 
|  | idx = link / 32; | 
|  | bit = link % 32; | 
|  |  | 
|  | reg = cpu_to_be32(0x80000000 >> bit); | 
|  |  | 
|  | if (!enable) | 
|  | return fsi_device_write(hub->upstream, FSI_MCENP0 + (4 * idx), | 
|  | ®, 4); | 
|  |  | 
|  | rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), ®, 4); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | mdelay(FSI_LINK_ENABLE_SETUP_TIME); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void hub_master_release(struct device *dev) | 
|  | { | 
|  | struct fsi_master_hub *hub = to_fsi_master_hub(dev_to_fsi_master(dev)); | 
|  |  | 
|  | kfree(hub); | 
|  | } | 
|  |  | 
|  | /* mmode encoders */ | 
|  | static inline u32 fsi_mmode_crs0(u32 x) | 
|  | { | 
|  | return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT; | 
|  | } | 
|  |  | 
|  | static inline u32 fsi_mmode_crs1(u32 x) | 
|  | { | 
|  | return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT; | 
|  | } | 
|  |  | 
|  | static int hub_master_init(struct fsi_master_hub *hub) | 
|  | { | 
|  | struct fsi_device *dev = hub->upstream; | 
|  | __be32 reg; | 
|  | int rc; | 
|  |  | 
|  | reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK | 
|  | | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE); | 
|  | rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | /* Initialize the MFSI (hub master) engine */ | 
|  | reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK | 
|  | | FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE); | 
|  | rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM); | 
|  | rc = fsi_device_write(dev, FSI_MECTRL, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC | 
|  | | fsi_mmode_crs0(1) | fsi_mmode_crs1(1) | 
|  | | FSI_MMODE_P8_TO_LSB); | 
|  | rc = fsi_device_write(dev, FSI_MMODE, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | reg = cpu_to_be32(0xffff0000); | 
|  | rc = fsi_device_write(dev, FSI_MDLYR, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | reg = cpu_to_be32(~0); | 
|  | rc = fsi_device_write(dev, FSI_MSENP0, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | /* Leave enabled long enough for master logic to set up */ | 
|  | mdelay(FSI_LINK_ENABLE_SETUP_TIME); | 
|  |  | 
|  | rc = fsi_device_write(dev, FSI_MCENP0, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | rc = fsi_device_read(dev, FSI_MAEB, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK); | 
|  | rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | rc = fsi_device_read(dev, FSI_MLEVP0, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | /* Reset the master bridge */ | 
|  | reg = cpu_to_be32(FSI_MRESB_RST_GEN); | 
|  | rc = fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | reg = cpu_to_be32(FSI_MRESB_RST_ERR); | 
|  | return fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg)); | 
|  | } | 
|  |  | 
|  | static int hub_master_probe(struct device *dev) | 
|  | { | 
|  | struct fsi_device *fsi_dev = to_fsi_dev(dev); | 
|  | struct fsi_master_hub *hub; | 
|  | uint32_t reg, links; | 
|  | __be32 __reg; | 
|  | int rc; | 
|  |  | 
|  | rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg)); | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | reg = be32_to_cpu(__reg); | 
|  | links = (reg >> 8) & 0xff; | 
|  | dev_dbg(dev, "hub version %08x (%d links)\n", reg, links); | 
|  |  | 
|  | rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET, | 
|  | FSI_HUB_LINK_SIZE * links); | 
|  | if (rc) { | 
|  | dev_err(dev, "can't claim slave address range for links"); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | hub = kzalloc(sizeof(*hub), GFP_KERNEL); | 
|  | if (!hub) { | 
|  | rc = -ENOMEM; | 
|  | goto err_release; | 
|  | } | 
|  |  | 
|  | hub->addr = FSI_HUB_LINK_OFFSET; | 
|  | hub->size = FSI_HUB_LINK_SIZE * links; | 
|  | hub->upstream = fsi_dev; | 
|  |  | 
|  | hub->master.dev.parent = dev; | 
|  | hub->master.dev.release = hub_master_release; | 
|  | hub->master.dev.of_node = of_node_get(dev_of_node(dev)); | 
|  |  | 
|  | hub->master.n_links = links; | 
|  | hub->master.read = hub_master_read; | 
|  | hub->master.write = hub_master_write; | 
|  | hub->master.send_break = hub_master_break; | 
|  | hub->master.link_enable = hub_master_link_enable; | 
|  |  | 
|  | dev_set_drvdata(dev, hub); | 
|  |  | 
|  | hub_master_init(hub); | 
|  |  | 
|  | rc = fsi_master_register(&hub->master); | 
|  | if (rc) | 
|  | goto err_release; | 
|  |  | 
|  | /* At this point, fsi_master_register performs the device_initialize(), | 
|  | * and holds the sole reference on master.dev. This means the device | 
|  | * will be freed (via ->release) during any subsequent call to | 
|  | * fsi_master_unregister.  We add our own reference to it here, so we | 
|  | * can perform cleanup (in _remove()) without it being freed before | 
|  | * we're ready. | 
|  | */ | 
|  | get_device(&hub->master.dev); | 
|  | return 0; | 
|  |  | 
|  | err_release: | 
|  | fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET, | 
|  | FSI_HUB_LINK_SIZE * links); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int hub_master_remove(struct device *dev) | 
|  | { | 
|  | struct fsi_master_hub *hub = dev_get_drvdata(dev); | 
|  |  | 
|  | fsi_master_unregister(&hub->master); | 
|  | fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size); | 
|  | of_node_put(hub->master.dev.of_node); | 
|  |  | 
|  | /* | 
|  | * master.dev will likely be ->release()ed after this, which free()s | 
|  | * the hub | 
|  | */ | 
|  | put_device(&hub->master.dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct fsi_device_id hub_master_ids[] = { | 
|  | { | 
|  | .engine_type = FSI_ENGID_HUB_MASTER, | 
|  | .version = FSI_VERSION_ANY, | 
|  | }, | 
|  | { 0 } | 
|  | }; | 
|  |  | 
|  | static struct fsi_driver hub_master_driver = { | 
|  | .id_table = hub_master_ids, | 
|  | .drv = { | 
|  | .name = "fsi-master-hub", | 
|  | .bus = &fsi_bus_type, | 
|  | .probe = hub_master_probe, | 
|  | .remove = hub_master_remove, | 
|  | } | 
|  | }; | 
|  |  | 
|  | module_fsi_driver(hub_master_driver); | 
|  | MODULE_LICENSE("GPL"); |