Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c: Fix docbook problem
ASoC/TLV320AIC3X: Stop I2C driver ID abuse
i2c-omap: Fix unhandled fault
i2c-bfin-twi: Disable BF54x support for now
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 476b0bb..5fa9c3c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -100,7 +100,7 @@
config I2C_BLACKFIN_TWI
tristate "Blackfin TWI I2C support"
- depends on BF534 || BF536 || BF537 || BF54x
+ depends on BF534 || BF536 || BF537
help
This is the TWI I2C device driver for Blackfin 534/536/537/54x.
This driver can also be built as a module. If so, the module
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index da66397..7ba3177 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -128,6 +128,8 @@
size_t buf_len;
struct i2c_adapter adapter;
unsigned rev1:1;
+ unsigned idle:1;
+ u16 iestate; /* Saved interrupt register */
};
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
@@ -174,18 +176,30 @@
}
}
-static void omap_i2c_enable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_unidle(struct omap_i2c_dev *dev)
{
if (dev->iclk != NULL)
clk_enable(dev->iclk);
clk_enable(dev->fclk);
+ if (dev->iestate)
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
+ dev->idle = 0;
}
-static void omap_i2c_disable_clocks(struct omap_i2c_dev *dev)
+static void omap_i2c_idle(struct omap_i2c_dev *dev)
{
+ u16 iv;
+
+ dev->idle = 1;
+ dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
+ if (dev->rev1)
+ iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
+ else
+ omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
+ clk_disable(dev->fclk);
if (dev->iclk != NULL)
clk_disable(dev->iclk);
- clk_disable(dev->fclk);
}
static int omap_i2c_init(struct omap_i2c_dev *dev)
@@ -360,7 +374,7 @@
int i;
int r;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if ((r = omap_i2c_wait_for_bb(dev)) < 0)
goto out;
@@ -374,7 +388,7 @@
if (r == 0)
r = num;
out:
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return r;
}
@@ -403,6 +417,9 @@
struct omap_i2c_dev *dev = dev_id;
u16 iv, w;
+ if (dev->idle)
+ return IRQ_NONE;
+
iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
switch (iv) {
case 0x00: /* None */
@@ -457,6 +474,9 @@
u16 stat, w;
int count = 0;
+ if (dev->idle)
+ return IRQ_NONE;
+
bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
@@ -575,7 +595,7 @@
if ((r = omap_i2c_get_clocks(dev)) != 0)
goto err_free_mem;
- omap_i2c_enable_clocks(dev);
+ omap_i2c_unidle(dev);
if (cpu_is_omap15xx())
dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20;
@@ -610,7 +630,7 @@
goto err_free_irq;
}
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
return 0;
@@ -618,7 +638,7 @@
free_irq(dev->irq, dev);
err_unuse_clocks:
omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
- omap_i2c_disable_clocks(dev);
+ omap_i2c_idle(dev);
omap_i2c_put_clocks(dev);
err_free_mem:
platform_set_drvdata(pdev, NULL);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index fd84b2a..8b645c6 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -489,8 +489,8 @@
* Context: can sleep
*
* This routine is used to declare an I2C adapter when its bus number
- * matters. Example: for I2C adapters from system-on-chip CPUs, or
- * otherwise built in to the system's mainboard, and where i2c_board_info
+ * matters. For example, use it for I2C adapters from system-on-chip CPUs,
+ * or otherwise built in to the system's mainboard, and where i2c_board_info
* is used to properly configure I2C devices.
*
* If no devices have pre-been declared for this bus, then be sure to
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 569ecac..889a897 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -1187,10 +1187,8 @@
.name = "aic3x I2C Codec",
.owner = THIS_MODULE,
},
- .id = I2C_DRIVERID_I2CDEV,
.attach_adapter = aic3x_i2c_attach,
.detach_client = aic3x_i2c_detach,
- .command = NULL,
};
static struct i2c_client client_template = {
