| /******************************************************************************* | 
 |  | 
 |   Intel PRO/1000 Linux driver | 
 |   Copyright(c) 1999 - 2009 Intel Corporation. | 
 |  | 
 |   This program is free software; you can redistribute it and/or modify it | 
 |   under the terms and conditions of the GNU General Public License, | 
 |   version 2, as published by the Free Software Foundation. | 
 |  | 
 |   This program is distributed in the hope it will be useful, but WITHOUT | 
 |   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
 |   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
 |   more details. | 
 |  | 
 |   You should have received a copy of the GNU General Public License along with | 
 |   this program; if not, write to the Free Software Foundation, Inc., | 
 |   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | 
 |  | 
 |   The full GNU General Public License is included in this distribution in | 
 |   the file called "COPYING". | 
 |  | 
 |   Contact Information: | 
 |   Linux NICS <linux.nics@intel.com> | 
 |   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> | 
 |   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
 |  | 
 | *******************************************************************************/ | 
 |  | 
 | /* ethtool support for e1000 */ | 
 |  | 
 | #include <linux/netdevice.h> | 
 | #include <linux/ethtool.h> | 
 | #include <linux/pci.h> | 
 | #include <linux/delay.h> | 
 |  | 
 | #include "e1000.h" | 
 |  | 
 | enum {NETDEV_STATS, E1000_STATS}; | 
 |  | 
 | struct e1000_stats { | 
 | 	char stat_string[ETH_GSTRING_LEN]; | 
 | 	int type; | 
 | 	int sizeof_stat; | 
 | 	int stat_offset; | 
 | }; | 
 |  | 
 | #define E1000_STAT(m)		E1000_STATS, \ | 
 | 				sizeof(((struct e1000_adapter *)0)->m), \ | 
 | 		      		offsetof(struct e1000_adapter, m) | 
 | #define E1000_NETDEV_STAT(m)	NETDEV_STATS, \ | 
 | 				sizeof(((struct net_device *)0)->m), \ | 
 | 				offsetof(struct net_device, m) | 
 |  | 
 | static const struct e1000_stats e1000_gstrings_stats[] = { | 
 | 	{ "rx_packets", E1000_STAT(stats.gprc) }, | 
 | 	{ "tx_packets", E1000_STAT(stats.gptc) }, | 
 | 	{ "rx_bytes", E1000_STAT(stats.gorc) }, | 
 | 	{ "tx_bytes", E1000_STAT(stats.gotc) }, | 
 | 	{ "rx_broadcast", E1000_STAT(stats.bprc) }, | 
 | 	{ "tx_broadcast", E1000_STAT(stats.bptc) }, | 
 | 	{ "rx_multicast", E1000_STAT(stats.mprc) }, | 
 | 	{ "tx_multicast", E1000_STAT(stats.mptc) }, | 
 | 	{ "rx_errors", E1000_NETDEV_STAT(stats.rx_errors) }, | 
 | 	{ "tx_errors", E1000_NETDEV_STAT(stats.tx_errors) }, | 
 | 	{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) }, | 
 | 	{ "multicast", E1000_STAT(stats.mprc) }, | 
 | 	{ "collisions", E1000_STAT(stats.colc) }, | 
 | 	{ "rx_length_errors", E1000_NETDEV_STAT(stats.rx_length_errors) }, | 
 | 	{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) }, | 
 | 	{ "rx_crc_errors", E1000_STAT(stats.crcerrs) }, | 
 | 	{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) }, | 
 | 	{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, | 
 | 	{ "rx_missed_errors", E1000_STAT(stats.mpc) }, | 
 | 	{ "tx_aborted_errors", E1000_STAT(stats.ecol) }, | 
 | 	{ "tx_carrier_errors", E1000_STAT(stats.tncrs) }, | 
 | 	{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) }, | 
 | 	{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) }, | 
 | 	{ "tx_window_errors", E1000_STAT(stats.latecol) }, | 
 | 	{ "tx_abort_late_coll", E1000_STAT(stats.latecol) }, | 
 | 	{ "tx_deferred_ok", E1000_STAT(stats.dc) }, | 
 | 	{ "tx_single_coll_ok", E1000_STAT(stats.scc) }, | 
 | 	{ "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, | 
 | 	{ "tx_timeout_count", E1000_STAT(tx_timeout_count) }, | 
 | 	{ "tx_restart_queue", E1000_STAT(restart_queue) }, | 
 | 	{ "rx_long_length_errors", E1000_STAT(stats.roc) }, | 
 | 	{ "rx_short_length_errors", E1000_STAT(stats.ruc) }, | 
 | 	{ "rx_align_errors", E1000_STAT(stats.algnerrc) }, | 
 | 	{ "tx_tcp_seg_good", E1000_STAT(stats.tsctc) }, | 
 | 	{ "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) }, | 
 | 	{ "rx_flow_control_xon", E1000_STAT(stats.xonrxc) }, | 
 | 	{ "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) }, | 
 | 	{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) }, | 
 | 	{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) }, | 
 | 	{ "rx_long_byte_count", E1000_STAT(stats.gorc) }, | 
 | 	{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) }, | 
 | 	{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) }, | 
 | 	{ "rx_header_split", E1000_STAT(rx_hdr_split) }, | 
 | 	{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) }, | 
 | 	{ "tx_smbus", E1000_STAT(stats.mgptc) }, | 
 | 	{ "rx_smbus", E1000_STAT(stats.mgprc) }, | 
 | 	{ "dropped_smbus", E1000_STAT(stats.mgpdc) }, | 
 | 	{ "rx_dma_failed", E1000_STAT(rx_dma_failed) }, | 
 | 	{ "tx_dma_failed", E1000_STAT(tx_dma_failed) }, | 
 | }; | 
 |  | 
 | #define E1000_GLOBAL_STATS_LEN	ARRAY_SIZE(e1000_gstrings_stats) | 
 | #define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN) | 
 | static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = { | 
 | 	"Register test  (offline)", "Eeprom test    (offline)", | 
 | 	"Interrupt test (offline)", "Loopback test  (offline)", | 
 | 	"Link test   (on/offline)" | 
 | }; | 
 | #define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test) | 
 |  | 
 | static int e1000_get_settings(struct net_device *netdev, | 
 | 			      struct ethtool_cmd *ecmd) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 status; | 
 |  | 
 | 	if (hw->phy.media_type == e1000_media_type_copper) { | 
 |  | 
 | 		ecmd->supported = (SUPPORTED_10baseT_Half | | 
 | 				   SUPPORTED_10baseT_Full | | 
 | 				   SUPPORTED_100baseT_Half | | 
 | 				   SUPPORTED_100baseT_Full | | 
 | 				   SUPPORTED_1000baseT_Full | | 
 | 				   SUPPORTED_Autoneg | | 
 | 				   SUPPORTED_TP); | 
 | 		if (hw->phy.type == e1000_phy_ife) | 
 | 			ecmd->supported &= ~SUPPORTED_1000baseT_Full; | 
 | 		ecmd->advertising = ADVERTISED_TP; | 
 |  | 
 | 		if (hw->mac.autoneg == 1) { | 
 | 			ecmd->advertising |= ADVERTISED_Autoneg; | 
 | 			/* the e1000 autoneg seems to match ethtool nicely */ | 
 | 			ecmd->advertising |= hw->phy.autoneg_advertised; | 
 | 		} | 
 |  | 
 | 		ecmd->port = PORT_TP; | 
 | 		ecmd->phy_address = hw->phy.addr; | 
 | 		ecmd->transceiver = XCVR_INTERNAL; | 
 |  | 
 | 	} else { | 
 | 		ecmd->supported   = (SUPPORTED_1000baseT_Full | | 
 | 				     SUPPORTED_FIBRE | | 
 | 				     SUPPORTED_Autoneg); | 
 |  | 
 | 		ecmd->advertising = (ADVERTISED_1000baseT_Full | | 
 | 				     ADVERTISED_FIBRE | | 
 | 				     ADVERTISED_Autoneg); | 
 |  | 
 | 		ecmd->port = PORT_FIBRE; | 
 | 		ecmd->transceiver = XCVR_EXTERNAL; | 
 | 	} | 
 |  | 
 | 	status = er32(STATUS); | 
 | 	if (status & E1000_STATUS_LU) { | 
 | 		if (status & E1000_STATUS_SPEED_1000) | 
 | 			ecmd->speed = 1000; | 
 | 		else if (status & E1000_STATUS_SPEED_100) | 
 | 			ecmd->speed = 100; | 
 | 		else | 
 | 			ecmd->speed = 10; | 
 |  | 
 | 		if (status & E1000_STATUS_FD) | 
 | 			ecmd->duplex = DUPLEX_FULL; | 
 | 		else | 
 | 			ecmd->duplex = DUPLEX_HALF; | 
 | 	} else { | 
 | 		ecmd->speed = -1; | 
 | 		ecmd->duplex = -1; | 
 | 	} | 
 |  | 
 | 	ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) || | 
 | 			 hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE; | 
 |  | 
 | 	/* MDI-X => 2; MDI =>1; Invalid =>0 */ | 
 | 	if ((hw->phy.media_type == e1000_media_type_copper) && | 
 | 	    !hw->mac.get_link_status) | 
 | 		ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X : | 
 | 		                                      ETH_TP_MDI; | 
 | 	else | 
 | 		ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u32 e1000_get_link(struct net_device *netdev) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_mac_info *mac = &adapter->hw.mac; | 
 |  | 
 | 	/* | 
 | 	 * If the link is not reported up to netdev, interrupts are disabled, | 
 | 	 * and so the physical link state may have changed since we last | 
 | 	 * looked. Set get_link_status to make sure that the true link | 
 | 	 * state is interrogated, rather than pulling a cached and possibly | 
 | 	 * stale link state from the driver. | 
 | 	 */ | 
 | 	if (!netif_carrier_ok(netdev)) | 
 | 		mac->get_link_status = 1; | 
 |  | 
 | 	return e1000e_has_link(adapter); | 
 | } | 
 |  | 
 | static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) | 
 | { | 
 | 	struct e1000_mac_info *mac = &adapter->hw.mac; | 
 |  | 
 | 	mac->autoneg = 0; | 
 |  | 
 | 	/* Fiber NICs only allow 1000 gbps Full duplex */ | 
 | 	if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && | 
 | 		spddplx != (SPEED_1000 + DUPLEX_FULL)) { | 
 | 		e_err("Unsupported Speed/Duplex configuration\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	switch (spddplx) { | 
 | 	case SPEED_10 + DUPLEX_HALF: | 
 | 		mac->forced_speed_duplex = ADVERTISE_10_HALF; | 
 | 		break; | 
 | 	case SPEED_10 + DUPLEX_FULL: | 
 | 		mac->forced_speed_duplex = ADVERTISE_10_FULL; | 
 | 		break; | 
 | 	case SPEED_100 + DUPLEX_HALF: | 
 | 		mac->forced_speed_duplex = ADVERTISE_100_HALF; | 
 | 		break; | 
 | 	case SPEED_100 + DUPLEX_FULL: | 
 | 		mac->forced_speed_duplex = ADVERTISE_100_FULL; | 
 | 		break; | 
 | 	case SPEED_1000 + DUPLEX_FULL: | 
 | 		mac->autoneg = 1; | 
 | 		adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL; | 
 | 		break; | 
 | 	case SPEED_1000 + DUPLEX_HALF: /* not supported */ | 
 | 	default: | 
 | 		e_err("Unsupported Speed/Duplex configuration\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_set_settings(struct net_device *netdev, | 
 | 			      struct ethtool_cmd *ecmd) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 |  | 
 | 	/* | 
 | 	 * When SoL/IDER sessions are active, autoneg/speed/duplex | 
 | 	 * cannot be changed | 
 | 	 */ | 
 | 	if (e1000_check_reset_block(hw)) { | 
 | 		e_err("Cannot change link characteristics when SoL/IDER is " | 
 | 		      "active.\n"); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) | 
 | 		msleep(1); | 
 |  | 
 | 	if (ecmd->autoneg == AUTONEG_ENABLE) { | 
 | 		hw->mac.autoneg = 1; | 
 | 		if (hw->phy.media_type == e1000_media_type_fiber) | 
 | 			hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full | | 
 | 						     ADVERTISED_FIBRE | | 
 | 						     ADVERTISED_Autoneg; | 
 | 		else | 
 | 			hw->phy.autoneg_advertised = ecmd->advertising | | 
 | 						     ADVERTISED_TP | | 
 | 						     ADVERTISED_Autoneg; | 
 | 		ecmd->advertising = hw->phy.autoneg_advertised; | 
 | 		if (adapter->fc_autoneg) | 
 | 			hw->fc.requested_mode = e1000_fc_default; | 
 | 	} else { | 
 | 		if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { | 
 | 			clear_bit(__E1000_RESETTING, &adapter->state); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* reset the link */ | 
 |  | 
 | 	if (netif_running(adapter->netdev)) { | 
 | 		e1000e_down(adapter); | 
 | 		e1000e_up(adapter); | 
 | 	} else { | 
 | 		e1000e_reset(adapter); | 
 | 	} | 
 |  | 
 | 	clear_bit(__E1000_RESETTING, &adapter->state); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void e1000_get_pauseparam(struct net_device *netdev, | 
 | 				 struct ethtool_pauseparam *pause) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 |  | 
 | 	pause->autoneg = | 
 | 		(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); | 
 |  | 
 | 	if (hw->fc.current_mode == e1000_fc_rx_pause) { | 
 | 		pause->rx_pause = 1; | 
 | 	} else if (hw->fc.current_mode == e1000_fc_tx_pause) { | 
 | 		pause->tx_pause = 1; | 
 | 	} else if (hw->fc.current_mode == e1000_fc_full) { | 
 | 		pause->rx_pause = 1; | 
 | 		pause->tx_pause = 1; | 
 | 	} | 
 | } | 
 |  | 
 | static int e1000_set_pauseparam(struct net_device *netdev, | 
 | 				struct ethtool_pauseparam *pause) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	int retval = 0; | 
 |  | 
 | 	adapter->fc_autoneg = pause->autoneg; | 
 |  | 
 | 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) | 
 | 		msleep(1); | 
 |  | 
 | 	if (adapter->fc_autoneg == AUTONEG_ENABLE) { | 
 | 		hw->fc.requested_mode = e1000_fc_default; | 
 | 		if (netif_running(adapter->netdev)) { | 
 | 			e1000e_down(adapter); | 
 | 			e1000e_up(adapter); | 
 | 		} else { | 
 | 			e1000e_reset(adapter); | 
 | 		} | 
 | 	} else { | 
 | 		if (pause->rx_pause && pause->tx_pause) | 
 | 			hw->fc.requested_mode = e1000_fc_full; | 
 | 		else if (pause->rx_pause && !pause->tx_pause) | 
 | 			hw->fc.requested_mode = e1000_fc_rx_pause; | 
 | 		else if (!pause->rx_pause && pause->tx_pause) | 
 | 			hw->fc.requested_mode = e1000_fc_tx_pause; | 
 | 		else if (!pause->rx_pause && !pause->tx_pause) | 
 | 			hw->fc.requested_mode = e1000_fc_none; | 
 |  | 
 | 		hw->fc.current_mode = hw->fc.requested_mode; | 
 |  | 
 | 		if (hw->phy.media_type == e1000_media_type_fiber) { | 
 | 			retval = hw->mac.ops.setup_link(hw); | 
 | 			/* implicit goto out */ | 
 | 		} else { | 
 | 			retval = e1000e_force_mac_fc(hw); | 
 | 			if (retval) | 
 | 				goto out; | 
 | 			e1000e_set_fc_watermarks(hw); | 
 | 		} | 
 | 	} | 
 |  | 
 | out: | 
 | 	clear_bit(__E1000_RESETTING, &adapter->state); | 
 | 	return retval; | 
 | } | 
 |  | 
 | static u32 e1000_get_rx_csum(struct net_device *netdev) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	return (adapter->flags & FLAG_RX_CSUM_ENABLED); | 
 | } | 
 |  | 
 | static int e1000_set_rx_csum(struct net_device *netdev, u32 data) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	if (data) | 
 | 		adapter->flags |= FLAG_RX_CSUM_ENABLED; | 
 | 	else | 
 | 		adapter->flags &= ~FLAG_RX_CSUM_ENABLED; | 
 |  | 
 | 	if (netif_running(netdev)) | 
 | 		e1000e_reinit_locked(adapter); | 
 | 	else | 
 | 		e1000e_reset(adapter); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u32 e1000_get_tx_csum(struct net_device *netdev) | 
 | { | 
 | 	return ((netdev->features & NETIF_F_HW_CSUM) != 0); | 
 | } | 
 |  | 
 | static int e1000_set_tx_csum(struct net_device *netdev, u32 data) | 
 | { | 
 | 	if (data) | 
 | 		netdev->features |= NETIF_F_HW_CSUM; | 
 | 	else | 
 | 		netdev->features &= ~NETIF_F_HW_CSUM; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_set_tso(struct net_device *netdev, u32 data) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	if (data) { | 
 | 		netdev->features |= NETIF_F_TSO; | 
 | 		netdev->features |= NETIF_F_TSO6; | 
 | 	} else { | 
 | 		netdev->features &= ~NETIF_F_TSO; | 
 | 		netdev->features &= ~NETIF_F_TSO6; | 
 | 	} | 
 |  | 
 | 	e_info("TSO is %s\n", data ? "Enabled" : "Disabled"); | 
 | 	adapter->flags |= FLAG_TSO_FORCE; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static u32 e1000_get_msglevel(struct net_device *netdev) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	return adapter->msg_enable; | 
 | } | 
 |  | 
 | static void e1000_set_msglevel(struct net_device *netdev, u32 data) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	adapter->msg_enable = data; | 
 | } | 
 |  | 
 | static int e1000_get_regs_len(struct net_device *netdev) | 
 | { | 
 | #define E1000_REGS_LEN 32 /* overestimate */ | 
 | 	return E1000_REGS_LEN * sizeof(u32); | 
 | } | 
 |  | 
 | static void e1000_get_regs(struct net_device *netdev, | 
 | 			   struct ethtool_regs *regs, void *p) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 *regs_buff = p; | 
 | 	u16 phy_data; | 
 | 	u8 revision_id; | 
 |  | 
 | 	memset(p, 0, E1000_REGS_LEN * sizeof(u32)); | 
 |  | 
 | 	pci_read_config_byte(adapter->pdev, PCI_REVISION_ID, &revision_id); | 
 |  | 
 | 	regs->version = (1 << 24) | (revision_id << 16) | adapter->pdev->device; | 
 |  | 
 | 	regs_buff[0]  = er32(CTRL); | 
 | 	regs_buff[1]  = er32(STATUS); | 
 |  | 
 | 	regs_buff[2]  = er32(RCTL); | 
 | 	regs_buff[3]  = er32(RDLEN); | 
 | 	regs_buff[4]  = er32(RDH); | 
 | 	regs_buff[5]  = er32(RDT); | 
 | 	regs_buff[6]  = er32(RDTR); | 
 |  | 
 | 	regs_buff[7]  = er32(TCTL); | 
 | 	regs_buff[8]  = er32(TDLEN); | 
 | 	regs_buff[9]  = er32(TDH); | 
 | 	regs_buff[10] = er32(TDT); | 
 | 	regs_buff[11] = er32(TIDV); | 
 |  | 
 | 	regs_buff[12] = adapter->hw.phy.type;  /* PHY type (IGP=1, M88=0) */ | 
 |  | 
 | 	/* ethtool doesn't use anything past this point, so all this | 
 | 	 * code is likely legacy junk for apps that may or may not | 
 | 	 * exist */ | 
 | 	if (hw->phy.type == e1000_phy_m88) { | 
 | 		e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); | 
 | 		regs_buff[13] = (u32)phy_data; /* cable length */ | 
 | 		regs_buff[14] = 0;  /* Dummy (to align w/ IGP phy reg dump) */ | 
 | 		regs_buff[15] = 0;  /* Dummy (to align w/ IGP phy reg dump) */ | 
 | 		regs_buff[16] = 0;  /* Dummy (to align w/ IGP phy reg dump) */ | 
 | 		e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); | 
 | 		regs_buff[17] = (u32)phy_data; /* extended 10bt distance */ | 
 | 		regs_buff[18] = regs_buff[13]; /* cable polarity */ | 
 | 		regs_buff[19] = 0;  /* Dummy (to align w/ IGP phy reg dump) */ | 
 | 		regs_buff[20] = regs_buff[17]; /* polarity correction */ | 
 | 		/* phy receive errors */ | 
 | 		regs_buff[22] = adapter->phy_stats.receive_errors; | 
 | 		regs_buff[23] = regs_buff[13]; /* mdix mode */ | 
 | 	} | 
 | 	regs_buff[21] = 0; /* was idle_errors */ | 
 | 	e1e_rphy(hw, PHY_1000T_STATUS, &phy_data); | 
 | 	regs_buff[24] = (u32)phy_data;  /* phy local receiver status */ | 
 | 	regs_buff[25] = regs_buff[24];  /* phy remote receiver status */ | 
 | } | 
 |  | 
 | static int e1000_get_eeprom_len(struct net_device *netdev) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	return adapter->hw.nvm.word_size * 2; | 
 | } | 
 |  | 
 | static int e1000_get_eeprom(struct net_device *netdev, | 
 | 			    struct ethtool_eeprom *eeprom, u8 *bytes) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u16 *eeprom_buff; | 
 | 	int first_word; | 
 | 	int last_word; | 
 | 	int ret_val = 0; | 
 | 	u16 i; | 
 |  | 
 | 	if (eeprom->len == 0) | 
 | 		return -EINVAL; | 
 |  | 
 | 	eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16); | 
 |  | 
 | 	first_word = eeprom->offset >> 1; | 
 | 	last_word = (eeprom->offset + eeprom->len - 1) >> 1; | 
 |  | 
 | 	eeprom_buff = kmalloc(sizeof(u16) * | 
 | 			(last_word - first_word + 1), GFP_KERNEL); | 
 | 	if (!eeprom_buff) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	if (hw->nvm.type == e1000_nvm_eeprom_spi) { | 
 | 		ret_val = e1000_read_nvm(hw, first_word, | 
 | 					 last_word - first_word + 1, | 
 | 					 eeprom_buff); | 
 | 	} else { | 
 | 		for (i = 0; i < last_word - first_word + 1; i++) { | 
 | 			ret_val = e1000_read_nvm(hw, first_word + i, 1, | 
 | 						      &eeprom_buff[i]); | 
 | 			if (ret_val) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (ret_val) { | 
 | 		/* a read error occurred, throw away the result */ | 
 | 		memset(eeprom_buff, 0xff, sizeof(u16) * | 
 | 		       (last_word - first_word + 1)); | 
 | 	} else { | 
 | 		/* Device's eeprom is always little-endian, word addressable */ | 
 | 		for (i = 0; i < last_word - first_word + 1; i++) | 
 | 			le16_to_cpus(&eeprom_buff[i]); | 
 | 	} | 
 |  | 
 | 	memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); | 
 | 	kfree(eeprom_buff); | 
 |  | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | static int e1000_set_eeprom(struct net_device *netdev, | 
 | 			    struct ethtool_eeprom *eeprom, u8 *bytes) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u16 *eeprom_buff; | 
 | 	void *ptr; | 
 | 	int max_len; | 
 | 	int first_word; | 
 | 	int last_word; | 
 | 	int ret_val = 0; | 
 | 	u16 i; | 
 |  | 
 | 	if (eeprom->len == 0) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	if (adapter->flags & FLAG_READ_ONLY_NVM) | 
 | 		return -EINVAL; | 
 |  | 
 | 	max_len = hw->nvm.word_size * 2; | 
 |  | 
 | 	first_word = eeprom->offset >> 1; | 
 | 	last_word = (eeprom->offset + eeprom->len - 1) >> 1; | 
 | 	eeprom_buff = kmalloc(max_len, GFP_KERNEL); | 
 | 	if (!eeprom_buff) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ptr = (void *)eeprom_buff; | 
 |  | 
 | 	if (eeprom->offset & 1) { | 
 | 		/* need read/modify/write of first changed EEPROM word */ | 
 | 		/* only the second byte of the word is being modified */ | 
 | 		ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]); | 
 | 		ptr++; | 
 | 	} | 
 | 	if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) | 
 | 		/* need read/modify/write of last changed EEPROM word */ | 
 | 		/* only the first byte of the word is being modified */ | 
 | 		ret_val = e1000_read_nvm(hw, last_word, 1, | 
 | 				  &eeprom_buff[last_word - first_word]); | 
 |  | 
 | 	if (ret_val) | 
 | 		goto out; | 
 |  | 
 | 	/* Device's eeprom is always little-endian, word addressable */ | 
 | 	for (i = 0; i < last_word - first_word + 1; i++) | 
 | 		le16_to_cpus(&eeprom_buff[i]); | 
 |  | 
 | 	memcpy(ptr, bytes, eeprom->len); | 
 |  | 
 | 	for (i = 0; i < last_word - first_word + 1; i++) | 
 | 		eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]); | 
 |  | 
 | 	ret_val = e1000_write_nvm(hw, first_word, | 
 | 				  last_word - first_word + 1, eeprom_buff); | 
 |  | 
 | 	if (ret_val) | 
 | 		goto out; | 
 |  | 
 | 	/* | 
 | 	 * Update the checksum over the first part of the EEPROM if needed | 
 | 	 * and flush shadow RAM for applicable controllers | 
 | 	 */ | 
 | 	if ((first_word <= NVM_CHECKSUM_REG) || | 
 | 	    (hw->mac.type == e1000_82583) || | 
 | 	    (hw->mac.type == e1000_82574) || | 
 | 	    (hw->mac.type == e1000_82573)) | 
 | 		ret_val = e1000e_update_nvm_checksum(hw); | 
 |  | 
 | out: | 
 | 	kfree(eeprom_buff); | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | static void e1000_get_drvinfo(struct net_device *netdev, | 
 | 			      struct ethtool_drvinfo *drvinfo) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	char firmware_version[32]; | 
 |  | 
 | 	strncpy(drvinfo->driver,  e1000e_driver_name, 32); | 
 | 	strncpy(drvinfo->version, e1000e_driver_version, 32); | 
 |  | 
 | 	/* | 
 | 	 * EEPROM image version # is reported as firmware version # for | 
 | 	 * PCI-E controllers | 
 | 	 */ | 
 | 	sprintf(firmware_version, "%d.%d-%d", | 
 | 		(adapter->eeprom_vers & 0xF000) >> 12, | 
 | 		(adapter->eeprom_vers & 0x0FF0) >> 4, | 
 | 		(adapter->eeprom_vers & 0x000F)); | 
 |  | 
 | 	strncpy(drvinfo->fw_version, firmware_version, 32); | 
 | 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32); | 
 | 	drvinfo->regdump_len = e1000_get_regs_len(netdev); | 
 | 	drvinfo->eedump_len = e1000_get_eeprom_len(netdev); | 
 | } | 
 |  | 
 | static void e1000_get_ringparam(struct net_device *netdev, | 
 | 				struct ethtool_ringparam *ring) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_ring *tx_ring = adapter->tx_ring; | 
 | 	struct e1000_ring *rx_ring = adapter->rx_ring; | 
 |  | 
 | 	ring->rx_max_pending = E1000_MAX_RXD; | 
 | 	ring->tx_max_pending = E1000_MAX_TXD; | 
 | 	ring->rx_mini_max_pending = 0; | 
 | 	ring->rx_jumbo_max_pending = 0; | 
 | 	ring->rx_pending = rx_ring->count; | 
 | 	ring->tx_pending = tx_ring->count; | 
 | 	ring->rx_mini_pending = 0; | 
 | 	ring->rx_jumbo_pending = 0; | 
 | } | 
 |  | 
 | static int e1000_set_ringparam(struct net_device *netdev, | 
 | 			       struct ethtool_ringparam *ring) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_ring *tx_ring, *tx_old; | 
 | 	struct e1000_ring *rx_ring, *rx_old; | 
 | 	int err; | 
 |  | 
 | 	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) | 
 | 		msleep(1); | 
 |  | 
 | 	if (netif_running(adapter->netdev)) | 
 | 		e1000e_down(adapter); | 
 |  | 
 | 	tx_old = adapter->tx_ring; | 
 | 	rx_old = adapter->rx_ring; | 
 |  | 
 | 	err = -ENOMEM; | 
 | 	tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); | 
 | 	if (!tx_ring) | 
 | 		goto err_alloc_tx; | 
 | 	/* | 
 | 	 * use a memcpy to save any previously configured | 
 | 	 * items like napi structs from having to be | 
 | 	 * reinitialized | 
 | 	 */ | 
 | 	memcpy(tx_ring, tx_old, sizeof(struct e1000_ring)); | 
 |  | 
 | 	rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); | 
 | 	if (!rx_ring) | 
 | 		goto err_alloc_rx; | 
 | 	memcpy(rx_ring, rx_old, sizeof(struct e1000_ring)); | 
 |  | 
 | 	adapter->tx_ring = tx_ring; | 
 | 	adapter->rx_ring = rx_ring; | 
 |  | 
 | 	rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD); | 
 | 	rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD)); | 
 | 	rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE); | 
 |  | 
 | 	tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD); | 
 | 	tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD)); | 
 | 	tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE); | 
 |  | 
 | 	if (netif_running(adapter->netdev)) { | 
 | 		/* Try to get new resources before deleting old */ | 
 | 		err = e1000e_setup_rx_resources(adapter); | 
 | 		if (err) | 
 | 			goto err_setup_rx; | 
 | 		err = e1000e_setup_tx_resources(adapter); | 
 | 		if (err) | 
 | 			goto err_setup_tx; | 
 |  | 
 | 		/* | 
 | 		 * restore the old in order to free it, | 
 | 		 * then add in the new | 
 | 		 */ | 
 | 		adapter->rx_ring = rx_old; | 
 | 		adapter->tx_ring = tx_old; | 
 | 		e1000e_free_rx_resources(adapter); | 
 | 		e1000e_free_tx_resources(adapter); | 
 | 		kfree(tx_old); | 
 | 		kfree(rx_old); | 
 | 		adapter->rx_ring = rx_ring; | 
 | 		adapter->tx_ring = tx_ring; | 
 | 		err = e1000e_up(adapter); | 
 | 		if (err) | 
 | 			goto err_setup; | 
 | 	} | 
 |  | 
 | 	clear_bit(__E1000_RESETTING, &adapter->state); | 
 | 	return 0; | 
 | err_setup_tx: | 
 | 	e1000e_free_rx_resources(adapter); | 
 | err_setup_rx: | 
 | 	adapter->rx_ring = rx_old; | 
 | 	adapter->tx_ring = tx_old; | 
 | 	kfree(rx_ring); | 
 | err_alloc_rx: | 
 | 	kfree(tx_ring); | 
 | err_alloc_tx: | 
 | 	e1000e_up(adapter); | 
 | err_setup: | 
 | 	clear_bit(__E1000_RESETTING, &adapter->state); | 
 | 	return err; | 
 | } | 
 |  | 
 | static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, | 
 | 			     int reg, int offset, u32 mask, u32 write) | 
 | { | 
 | 	u32 pat, val; | 
 | 	static const u32 test[] = | 
 | 		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; | 
 | 	for (pat = 0; pat < ARRAY_SIZE(test); pat++) { | 
 | 		E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset, | 
 | 				      (test[pat] & write)); | 
 | 		val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); | 
 | 		if (val != (test[pat] & write & mask)) { | 
 | 			e_err("pattern test reg %04X failed: got 0x%08X " | 
 | 			      "expected 0x%08X\n", reg + offset, val, | 
 | 			      (test[pat] & write & mask)); | 
 | 			*data = reg; | 
 | 			return 1; | 
 | 		} | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, | 
 | 			      int reg, u32 mask, u32 write) | 
 | { | 
 | 	u32 val; | 
 | 	__ew32(&adapter->hw, reg, write & mask); | 
 | 	val = __er32(&adapter->hw, reg); | 
 | 	if ((write & mask) != (val & mask)) { | 
 | 		e_err("set/check reg %04X test failed: got 0x%08X " | 
 | 		      "expected 0x%08X\n", reg, (val & mask), (write & mask)); | 
 | 		*data = reg; | 
 | 		return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 | #define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write)                       \ | 
 | 	do {                                                                   \ | 
 | 		if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \ | 
 | 			return 1;                                              \ | 
 | 	} while (0) | 
 | #define REG_PATTERN_TEST(reg, mask, write)                                     \ | 
 | 	REG_PATTERN_TEST_ARRAY(reg, 0, mask, write) | 
 |  | 
 | #define REG_SET_AND_CHECK(reg, mask, write)                                    \ | 
 | 	do {                                                                   \ | 
 | 		if (reg_set_and_check(adapter, data, reg, mask, write))        \ | 
 | 			return 1;                                              \ | 
 | 	} while (0) | 
 |  | 
 | static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) | 
 | { | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	struct e1000_mac_info *mac = &adapter->hw.mac; | 
 | 	u32 value; | 
 | 	u32 before; | 
 | 	u32 after; | 
 | 	u32 i; | 
 | 	u32 toggle; | 
 | 	u32 mask; | 
 |  | 
 | 	/* | 
 | 	 * The status register is Read Only, so a write should fail. | 
 | 	 * Some bits that get toggled are ignored. | 
 | 	 */ | 
 | 	switch (mac->type) { | 
 | 	/* there are several bits on newer hardware that are r/w */ | 
 | 	case e1000_82571: | 
 | 	case e1000_82572: | 
 | 	case e1000_80003es2lan: | 
 | 		toggle = 0x7FFFF3FF; | 
 | 		break; | 
 |         default: | 
 | 		toggle = 0x7FFFF033; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	before = er32(STATUS); | 
 | 	value = (er32(STATUS) & toggle); | 
 | 	ew32(STATUS, toggle); | 
 | 	after = er32(STATUS) & toggle; | 
 | 	if (value != after) { | 
 | 		e_err("failed STATUS register test got: 0x%08X expected: " | 
 | 		      "0x%08X\n", after, value); | 
 | 		*data = 1; | 
 | 		return 1; | 
 | 	} | 
 | 	/* restore previous status */ | 
 | 	ew32(STATUS, before); | 
 |  | 
 | 	if (!(adapter->flags & FLAG_IS_ICH)) { | 
 | 		REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF); | 
 | 		REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF); | 
 | 		REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF); | 
 | 		REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF); | 
 | 	} | 
 |  | 
 | 	REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF); | 
 | 	REG_PATTERN_TEST(E1000_RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); | 
 | 	REG_PATTERN_TEST(E1000_RDLEN, 0x000FFF80, 0x000FFFFF); | 
 | 	REG_PATTERN_TEST(E1000_RDH, 0x0000FFFF, 0x0000FFFF); | 
 | 	REG_PATTERN_TEST(E1000_RDT, 0x0000FFFF, 0x0000FFFF); | 
 | 	REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8); | 
 | 	REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF); | 
 | 	REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF); | 
 | 	REG_PATTERN_TEST(E1000_TDBAH, 0xFFFFFFFF, 0xFFFFFFFF); | 
 | 	REG_PATTERN_TEST(E1000_TDLEN, 0x000FFF80, 0x000FFFFF); | 
 |  | 
 | 	REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000); | 
 |  | 
 | 	before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE); | 
 | 	REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB); | 
 | 	REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000); | 
 |  | 
 | 	REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF); | 
 | 	REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF); | 
 | 	if (!(adapter->flags & FLAG_IS_ICH)) | 
 | 		REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF); | 
 | 	REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); | 
 | 	REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF); | 
 | 	mask = 0x8003FFFF; | 
 | 	switch (mac->type) { | 
 | 	case e1000_ich10lan: | 
 | 	case e1000_pchlan: | 
 | 		mask |= (1 << 18); | 
 | 		break; | 
 | 	default: | 
 | 		break; | 
 | 	} | 
 | 	for (i = 0; i < mac->rar_entry_count; i++) | 
 | 		REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1), | 
 | 		                       mask, 0xFFFFFFFF); | 
 |  | 
 | 	for (i = 0; i < mac->mta_reg_count; i++) | 
 | 		REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF); | 
 |  | 
 | 	*data = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data) | 
 | { | 
 | 	u16 temp; | 
 | 	u16 checksum = 0; | 
 | 	u16 i; | 
 |  | 
 | 	*data = 0; | 
 | 	/* Read and add up the contents of the EEPROM */ | 
 | 	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { | 
 | 		if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) { | 
 | 			*data = 1; | 
 | 			return *data; | 
 | 		} | 
 | 		checksum += temp; | 
 | 	} | 
 |  | 
 | 	/* If Checksum is not Correct return error else test passed */ | 
 | 	if ((checksum != (u16) NVM_SUM) && !(*data)) | 
 | 		*data = 2; | 
 |  | 
 | 	return *data; | 
 | } | 
 |  | 
 | static irqreturn_t e1000_test_intr(int irq, void *data) | 
 | { | 
 | 	struct net_device *netdev = (struct net_device *) data; | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 |  | 
 | 	adapter->test_icr |= er32(ICR); | 
 |  | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) | 
 | { | 
 | 	struct net_device *netdev = adapter->netdev; | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 mask; | 
 | 	u32 shared_int = 1; | 
 | 	u32 irq = adapter->pdev->irq; | 
 | 	int i; | 
 | 	int ret_val = 0; | 
 | 	int int_mode = E1000E_INT_MODE_LEGACY; | 
 |  | 
 | 	*data = 0; | 
 |  | 
 | 	/* NOTE: we don't test MSI/MSI-X interrupts here, yet */ | 
 | 	if (adapter->int_mode == E1000E_INT_MODE_MSIX) { | 
 | 		int_mode = adapter->int_mode; | 
 | 		e1000e_reset_interrupt_capability(adapter); | 
 | 		adapter->int_mode = E1000E_INT_MODE_LEGACY; | 
 | 		e1000e_set_interrupt_capability(adapter); | 
 | 	} | 
 | 	/* Hook up test interrupt handler just for this test */ | 
 | 	if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, | 
 | 			 netdev)) { | 
 | 		shared_int = 0; | 
 | 	} else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, | 
 | 		 netdev->name, netdev)) { | 
 | 		*data = 1; | 
 | 		ret_val = -1; | 
 | 		goto out; | 
 | 	} | 
 | 	e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared")); | 
 |  | 
 | 	/* Disable all the interrupts */ | 
 | 	ew32(IMC, 0xFFFFFFFF); | 
 | 	msleep(10); | 
 |  | 
 | 	/* Test each interrupt */ | 
 | 	for (i = 0; i < 10; i++) { | 
 | 		/* Interrupt to test */ | 
 | 		mask = 1 << i; | 
 |  | 
 | 		if (adapter->flags & FLAG_IS_ICH) { | 
 | 			switch (mask) { | 
 | 			case E1000_ICR_RXSEQ: | 
 | 				continue; | 
 | 			case 0x00000100: | 
 | 				if (adapter->hw.mac.type == e1000_ich8lan || | 
 | 				    adapter->hw.mac.type == e1000_ich9lan) | 
 | 					continue; | 
 | 				break; | 
 | 			default: | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		if (!shared_int) { | 
 | 			/* | 
 | 			 * Disable the interrupt to be reported in | 
 | 			 * the cause register and then force the same | 
 | 			 * interrupt and see if one gets posted.  If | 
 | 			 * an interrupt was posted to the bus, the | 
 | 			 * test failed. | 
 | 			 */ | 
 | 			adapter->test_icr = 0; | 
 | 			ew32(IMC, mask); | 
 | 			ew32(ICS, mask); | 
 | 			msleep(10); | 
 |  | 
 | 			if (adapter->test_icr & mask) { | 
 | 				*data = 3; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * Enable the interrupt to be reported in | 
 | 		 * the cause register and then force the same | 
 | 		 * interrupt and see if one gets posted.  If | 
 | 		 * an interrupt was not posted to the bus, the | 
 | 		 * test failed. | 
 | 		 */ | 
 | 		adapter->test_icr = 0; | 
 | 		ew32(IMS, mask); | 
 | 		ew32(ICS, mask); | 
 | 		msleep(10); | 
 |  | 
 | 		if (!(adapter->test_icr & mask)) { | 
 | 			*data = 4; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		if (!shared_int) { | 
 | 			/* | 
 | 			 * Disable the other interrupts to be reported in | 
 | 			 * the cause register and then force the other | 
 | 			 * interrupts and see if any get posted.  If | 
 | 			 * an interrupt was posted to the bus, the | 
 | 			 * test failed. | 
 | 			 */ | 
 | 			adapter->test_icr = 0; | 
 | 			ew32(IMC, ~mask & 0x00007FFF); | 
 | 			ew32(ICS, ~mask & 0x00007FFF); | 
 | 			msleep(10); | 
 |  | 
 | 			if (adapter->test_icr) { | 
 | 				*data = 5; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Disable all the interrupts */ | 
 | 	ew32(IMC, 0xFFFFFFFF); | 
 | 	msleep(10); | 
 |  | 
 | 	/* Unhook test interrupt handler */ | 
 | 	free_irq(irq, netdev); | 
 |  | 
 | out: | 
 | 	if (int_mode == E1000E_INT_MODE_MSIX) { | 
 | 		e1000e_reset_interrupt_capability(adapter); | 
 | 		adapter->int_mode = int_mode; | 
 | 		e1000e_set_interrupt_capability(adapter); | 
 | 	} | 
 |  | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | static void e1000_free_desc_rings(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_ring *tx_ring = &adapter->test_tx_ring; | 
 | 	struct e1000_ring *rx_ring = &adapter->test_rx_ring; | 
 | 	struct pci_dev *pdev = adapter->pdev; | 
 | 	int i; | 
 |  | 
 | 	if (tx_ring->desc && tx_ring->buffer_info) { | 
 | 		for (i = 0; i < tx_ring->count; i++) { | 
 | 			if (tx_ring->buffer_info[i].dma) | 
 | 				pci_unmap_single(pdev, | 
 | 					tx_ring->buffer_info[i].dma, | 
 | 					tx_ring->buffer_info[i].length, | 
 | 					PCI_DMA_TODEVICE); | 
 | 			if (tx_ring->buffer_info[i].skb) | 
 | 				dev_kfree_skb(tx_ring->buffer_info[i].skb); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (rx_ring->desc && rx_ring->buffer_info) { | 
 | 		for (i = 0; i < rx_ring->count; i++) { | 
 | 			if (rx_ring->buffer_info[i].dma) | 
 | 				pci_unmap_single(pdev, | 
 | 					rx_ring->buffer_info[i].dma, | 
 | 					2048, PCI_DMA_FROMDEVICE); | 
 | 			if (rx_ring->buffer_info[i].skb) | 
 | 				dev_kfree_skb(rx_ring->buffer_info[i].skb); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (tx_ring->desc) { | 
 | 		dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc, | 
 | 				  tx_ring->dma); | 
 | 		tx_ring->desc = NULL; | 
 | 	} | 
 | 	if (rx_ring->desc) { | 
 | 		dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc, | 
 | 				  rx_ring->dma); | 
 | 		rx_ring->desc = NULL; | 
 | 	} | 
 |  | 
 | 	kfree(tx_ring->buffer_info); | 
 | 	tx_ring->buffer_info = NULL; | 
 | 	kfree(rx_ring->buffer_info); | 
 | 	rx_ring->buffer_info = NULL; | 
 | } | 
 |  | 
 | static int e1000_setup_desc_rings(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_ring *tx_ring = &adapter->test_tx_ring; | 
 | 	struct e1000_ring *rx_ring = &adapter->test_rx_ring; | 
 | 	struct pci_dev *pdev = adapter->pdev; | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 rctl; | 
 | 	int i; | 
 | 	int ret_val; | 
 |  | 
 | 	/* Setup Tx descriptor ring and Tx buffers */ | 
 |  | 
 | 	if (!tx_ring->count) | 
 | 		tx_ring->count = E1000_DEFAULT_TXD; | 
 |  | 
 | 	tx_ring->buffer_info = kcalloc(tx_ring->count, | 
 | 				       sizeof(struct e1000_buffer), | 
 | 				       GFP_KERNEL); | 
 | 	if (!(tx_ring->buffer_info)) { | 
 | 		ret_val = 1; | 
 | 		goto err_nomem; | 
 | 	} | 
 |  | 
 | 	tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc); | 
 | 	tx_ring->size = ALIGN(tx_ring->size, 4096); | 
 | 	tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size, | 
 | 					   &tx_ring->dma, GFP_KERNEL); | 
 | 	if (!tx_ring->desc) { | 
 | 		ret_val = 2; | 
 | 		goto err_nomem; | 
 | 	} | 
 | 	tx_ring->next_to_use = 0; | 
 | 	tx_ring->next_to_clean = 0; | 
 |  | 
 | 	ew32(TDBAL, ((u64) tx_ring->dma & 0x00000000FFFFFFFF)); | 
 | 	ew32(TDBAH, ((u64) tx_ring->dma >> 32)); | 
 | 	ew32(TDLEN, tx_ring->count * sizeof(struct e1000_tx_desc)); | 
 | 	ew32(TDH, 0); | 
 | 	ew32(TDT, 0); | 
 | 	ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR | | 
 | 	     E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT | | 
 | 	     E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT); | 
 |  | 
 | 	for (i = 0; i < tx_ring->count; i++) { | 
 | 		struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i); | 
 | 		struct sk_buff *skb; | 
 | 		unsigned int skb_size = 1024; | 
 |  | 
 | 		skb = alloc_skb(skb_size, GFP_KERNEL); | 
 | 		if (!skb) { | 
 | 			ret_val = 3; | 
 | 			goto err_nomem; | 
 | 		} | 
 | 		skb_put(skb, skb_size); | 
 | 		tx_ring->buffer_info[i].skb = skb; | 
 | 		tx_ring->buffer_info[i].length = skb->len; | 
 | 		tx_ring->buffer_info[i].dma = | 
 | 			pci_map_single(pdev, skb->data, skb->len, | 
 | 				       PCI_DMA_TODEVICE); | 
 | 		if (pci_dma_mapping_error(pdev, tx_ring->buffer_info[i].dma)) { | 
 | 			ret_val = 4; | 
 | 			goto err_nomem; | 
 | 		} | 
 | 		tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma); | 
 | 		tx_desc->lower.data = cpu_to_le32(skb->len); | 
 | 		tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP | | 
 | 						   E1000_TXD_CMD_IFCS | | 
 | 						   E1000_TXD_CMD_RS); | 
 | 		tx_desc->upper.data = 0; | 
 | 	} | 
 |  | 
 | 	/* Setup Rx descriptor ring and Rx buffers */ | 
 |  | 
 | 	if (!rx_ring->count) | 
 | 		rx_ring->count = E1000_DEFAULT_RXD; | 
 |  | 
 | 	rx_ring->buffer_info = kcalloc(rx_ring->count, | 
 | 				       sizeof(struct e1000_buffer), | 
 | 				       GFP_KERNEL); | 
 | 	if (!(rx_ring->buffer_info)) { | 
 | 		ret_val = 5; | 
 | 		goto err_nomem; | 
 | 	} | 
 |  | 
 | 	rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc); | 
 | 	rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size, | 
 | 					   &rx_ring->dma, GFP_KERNEL); | 
 | 	if (!rx_ring->desc) { | 
 | 		ret_val = 6; | 
 | 		goto err_nomem; | 
 | 	} | 
 | 	rx_ring->next_to_use = 0; | 
 | 	rx_ring->next_to_clean = 0; | 
 |  | 
 | 	rctl = er32(RCTL); | 
 | 	ew32(RCTL, rctl & ~E1000_RCTL_EN); | 
 | 	ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF)); | 
 | 	ew32(RDBAH, ((u64) rx_ring->dma >> 32)); | 
 | 	ew32(RDLEN, rx_ring->size); | 
 | 	ew32(RDH, 0); | 
 | 	ew32(RDT, 0); | 
 | 	rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 | | 
 | 		E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE | | 
 | 		E1000_RCTL_SBP | E1000_RCTL_SECRC | | 
 | 		E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF | | 
 | 		(adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT); | 
 | 	ew32(RCTL, rctl); | 
 |  | 
 | 	for (i = 0; i < rx_ring->count; i++) { | 
 | 		struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i); | 
 | 		struct sk_buff *skb; | 
 |  | 
 | 		skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL); | 
 | 		if (!skb) { | 
 | 			ret_val = 7; | 
 | 			goto err_nomem; | 
 | 		} | 
 | 		skb_reserve(skb, NET_IP_ALIGN); | 
 | 		rx_ring->buffer_info[i].skb = skb; | 
 | 		rx_ring->buffer_info[i].dma = | 
 | 			pci_map_single(pdev, skb->data, 2048, | 
 | 				       PCI_DMA_FROMDEVICE); | 
 | 		if (pci_dma_mapping_error(pdev, rx_ring->buffer_info[i].dma)) { | 
 | 			ret_val = 8; | 
 | 			goto err_nomem; | 
 | 		} | 
 | 		rx_desc->buffer_addr = | 
 | 			cpu_to_le64(rx_ring->buffer_info[i].dma); | 
 | 		memset(skb->data, 0x00, skb->len); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_nomem: | 
 | 	e1000_free_desc_rings(adapter); | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | static void e1000_phy_disable_receiver(struct e1000_adapter *adapter) | 
 | { | 
 | 	/* Write out to PHY registers 29 and 30 to disable the Receiver. */ | 
 | 	e1e_wphy(&adapter->hw, 29, 0x001F); | 
 | 	e1e_wphy(&adapter->hw, 30, 0x8FFC); | 
 | 	e1e_wphy(&adapter->hw, 29, 0x001A); | 
 | 	e1e_wphy(&adapter->hw, 30, 0x8FF0); | 
 | } | 
 |  | 
 | static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 ctrl_reg = 0; | 
 | 	u32 stat_reg = 0; | 
 | 	u16 phy_reg = 0; | 
 |  | 
 | 	hw->mac.autoneg = 0; | 
 |  | 
 | 	/* Workaround: K1 must be disabled for stable 1Gbps operation */ | 
 | 	if (hw->mac.type == e1000_pchlan) | 
 | 		e1000_configure_k1_ich8lan(hw, false); | 
 |  | 
 | 	if (hw->phy.type == e1000_phy_m88) { | 
 | 		/* Auto-MDI/MDIX Off */ | 
 | 		e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); | 
 | 		/* reset to update Auto-MDI/MDIX */ | 
 | 		e1e_wphy(hw, PHY_CONTROL, 0x9140); | 
 | 		/* autoneg off */ | 
 | 		e1e_wphy(hw, PHY_CONTROL, 0x8140); | 
 | 	} else if (hw->phy.type == e1000_phy_gg82563) | 
 | 		e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC); | 
 |  | 
 | 	ctrl_reg = er32(CTRL); | 
 |  | 
 | 	switch (hw->phy.type) { | 
 | 	case e1000_phy_ife: | 
 | 		/* force 100, set loopback */ | 
 | 		e1e_wphy(hw, PHY_CONTROL, 0x6100); | 
 |  | 
 | 		/* Now set up the MAC to the same speed/duplex as the PHY. */ | 
 | 		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ | 
 | 		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ | 
 | 			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ | 
 | 			     E1000_CTRL_SPD_100 |/* Force Speed to 100 */ | 
 | 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */ | 
 | 		break; | 
 | 	case e1000_phy_bm: | 
 | 		/* Set Default MAC Interface speed to 1GB */ | 
 | 		e1e_rphy(hw, PHY_REG(2, 21), &phy_reg); | 
 | 		phy_reg &= ~0x0007; | 
 | 		phy_reg |= 0x006; | 
 | 		e1e_wphy(hw, PHY_REG(2, 21), phy_reg); | 
 | 		/* Assert SW reset for above settings to take effect */ | 
 | 		e1000e_commit_phy(hw); | 
 | 		mdelay(1); | 
 | 		/* Force Full Duplex */ | 
 | 		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); | 
 | 		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C); | 
 | 		/* Set Link Up (in force link) */ | 
 | 		e1e_rphy(hw, PHY_REG(776, 16), &phy_reg); | 
 | 		e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040); | 
 | 		/* Force Link */ | 
 | 		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg); | 
 | 		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040); | 
 | 		/* Set Early Link Enable */ | 
 | 		e1e_rphy(hw, PHY_REG(769, 20), &phy_reg); | 
 | 		e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400); | 
 | 		/* fall through */ | 
 | 	default: | 
 | 		/* force 1000, set loopback */ | 
 | 		e1e_wphy(hw, PHY_CONTROL, 0x4140); | 
 | 		mdelay(250); | 
 |  | 
 | 		/* Now set up the MAC to the same speed/duplex as the PHY. */ | 
 | 		ctrl_reg = er32(CTRL); | 
 | 		ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */ | 
 | 		ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */ | 
 | 			     E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */ | 
 | 			     E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */ | 
 | 			     E1000_CTRL_FD);	 /* Force Duplex to FULL */ | 
 |  | 
 | 		if (adapter->flags & FLAG_IS_ICH) | 
 | 			ctrl_reg |= E1000_CTRL_SLU;	/* Set Link Up */ | 
 | 	} | 
 |  | 
 | 	if (hw->phy.media_type == e1000_media_type_copper && | 
 | 	    hw->phy.type == e1000_phy_m88) { | 
 | 		ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */ | 
 | 	} else { | 
 | 		/* | 
 | 		 * Set the ILOS bit on the fiber Nic if half duplex link is | 
 | 		 * detected. | 
 | 		 */ | 
 | 		stat_reg = er32(STATUS); | 
 | 		if ((stat_reg & E1000_STATUS_FD) == 0) | 
 | 			ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU); | 
 | 	} | 
 |  | 
 | 	ew32(CTRL, ctrl_reg); | 
 |  | 
 | 	/* | 
 | 	 * Disable the receiver on the PHY so when a cable is plugged in, the | 
 | 	 * PHY does not begin to autoneg when a cable is reconnected to the NIC. | 
 | 	 */ | 
 | 	if (hw->phy.type == e1000_phy_m88) | 
 | 		e1000_phy_disable_receiver(adapter); | 
 |  | 
 | 	udelay(500); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 ctrl = er32(CTRL); | 
 | 	int link = 0; | 
 |  | 
 | 	/* special requirements for 82571/82572 fiber adapters */ | 
 |  | 
 | 	/* | 
 | 	 * jump through hoops to make sure link is up because serdes | 
 | 	 * link is hardwired up | 
 | 	 */ | 
 | 	ctrl |= E1000_CTRL_SLU; | 
 | 	ew32(CTRL, ctrl); | 
 |  | 
 | 	/* disable autoneg */ | 
 | 	ctrl = er32(TXCW); | 
 | 	ctrl &= ~(1 << 31); | 
 | 	ew32(TXCW, ctrl); | 
 |  | 
 | 	link = (er32(STATUS) & E1000_STATUS_LU); | 
 |  | 
 | 	if (!link) { | 
 | 		/* set invert loss of signal */ | 
 | 		ctrl = er32(CTRL); | 
 | 		ctrl |= E1000_CTRL_ILOS; | 
 | 		ew32(CTRL, ctrl); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * special write to serdes control register to enable SerDes analog | 
 | 	 * loopback | 
 | 	 */ | 
 | #define E1000_SERDES_LB_ON 0x410 | 
 | 	ew32(SCTL, E1000_SERDES_LB_ON); | 
 | 	msleep(10); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* only call this for fiber/serdes connections to es2lan */ | 
 | static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 ctrlext = er32(CTRL_EXT); | 
 | 	u32 ctrl = er32(CTRL); | 
 |  | 
 | 	/* | 
 | 	 * save CTRL_EXT to restore later, reuse an empty variable (unused | 
 | 	 * on mac_type 80003es2lan) | 
 | 	 */ | 
 | 	adapter->tx_fifo_head = ctrlext; | 
 |  | 
 | 	/* clear the serdes mode bits, putting the device into mac loopback */ | 
 | 	ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES; | 
 | 	ew32(CTRL_EXT, ctrlext); | 
 |  | 
 | 	/* force speed to 1000/FD, link up */ | 
 | 	ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); | 
 | 	ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | | 
 | 		 E1000_CTRL_SPD_1000 | E1000_CTRL_FD); | 
 | 	ew32(CTRL, ctrl); | 
 |  | 
 | 	/* set mac loopback */ | 
 | 	ctrl = er32(RCTL); | 
 | 	ctrl |= E1000_RCTL_LBM_MAC; | 
 | 	ew32(RCTL, ctrl); | 
 |  | 
 | 	/* set testing mode parameters (no need to reset later) */ | 
 | #define KMRNCTRLSTA_OPMODE (0x1F << 16) | 
 | #define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582 | 
 | 	ew32(KMRNCTRLSTA, | 
 | 	     (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII)); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_setup_loopback_test(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 rctl; | 
 |  | 
 | 	if (hw->phy.media_type == e1000_media_type_fiber || | 
 | 	    hw->phy.media_type == e1000_media_type_internal_serdes) { | 
 | 		switch (hw->mac.type) { | 
 | 		case e1000_80003es2lan: | 
 | 			return e1000_set_es2lan_mac_loopback(adapter); | 
 | 			break; | 
 | 		case e1000_82571: | 
 | 		case e1000_82572: | 
 | 			return e1000_set_82571_fiber_loopback(adapter); | 
 | 			break; | 
 | 		default: | 
 | 			rctl = er32(RCTL); | 
 | 			rctl |= E1000_RCTL_LBM_TCVR; | 
 | 			ew32(RCTL, rctl); | 
 | 			return 0; | 
 | 		} | 
 | 	} else if (hw->phy.media_type == e1000_media_type_copper) { | 
 | 		return e1000_integrated_phy_loopback(adapter); | 
 | 	} | 
 |  | 
 | 	return 7; | 
 | } | 
 |  | 
 | static void e1000_loopback_cleanup(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	u32 rctl; | 
 | 	u16 phy_reg; | 
 |  | 
 | 	rctl = er32(RCTL); | 
 | 	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC); | 
 | 	ew32(RCTL, rctl); | 
 |  | 
 | 	switch (hw->mac.type) { | 
 | 	case e1000_80003es2lan: | 
 | 		if (hw->phy.media_type == e1000_media_type_fiber || | 
 | 		    hw->phy.media_type == e1000_media_type_internal_serdes) { | 
 | 			/* restore CTRL_EXT, stealing space from tx_fifo_head */ | 
 | 			ew32(CTRL_EXT, adapter->tx_fifo_head); | 
 | 			adapter->tx_fifo_head = 0; | 
 | 		} | 
 | 		/* fall through */ | 
 | 	case e1000_82571: | 
 | 	case e1000_82572: | 
 | 		if (hw->phy.media_type == e1000_media_type_fiber || | 
 | 		    hw->phy.media_type == e1000_media_type_internal_serdes) { | 
 | #define E1000_SERDES_LB_OFF 0x400 | 
 | 			ew32(SCTL, E1000_SERDES_LB_OFF); | 
 | 			msleep(10); | 
 | 			break; | 
 | 		} | 
 | 		/* Fall Through */ | 
 | 	default: | 
 | 		hw->mac.autoneg = 1; | 
 | 		if (hw->phy.type == e1000_phy_gg82563) | 
 | 			e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180); | 
 | 		e1e_rphy(hw, PHY_CONTROL, &phy_reg); | 
 | 		if (phy_reg & MII_CR_LOOPBACK) { | 
 | 			phy_reg &= ~MII_CR_LOOPBACK; | 
 | 			e1e_wphy(hw, PHY_CONTROL, phy_reg); | 
 | 			e1000e_commit_phy(hw); | 
 | 		} | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static void e1000_create_lbtest_frame(struct sk_buff *skb, | 
 | 				      unsigned int frame_size) | 
 | { | 
 | 	memset(skb->data, 0xFF, frame_size); | 
 | 	frame_size &= ~1; | 
 | 	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); | 
 | 	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); | 
 | 	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); | 
 | } | 
 |  | 
 | static int e1000_check_lbtest_frame(struct sk_buff *skb, | 
 | 				    unsigned int frame_size) | 
 | { | 
 | 	frame_size &= ~1; | 
 | 	if (*(skb->data + 3) == 0xFF) | 
 | 		if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && | 
 | 		   (*(skb->data + frame_size / 2 + 12) == 0xAF)) | 
 | 			return 0; | 
 | 	return 13; | 
 | } | 
 |  | 
 | static int e1000_run_loopback_test(struct e1000_adapter *adapter) | 
 | { | 
 | 	struct e1000_ring *tx_ring = &adapter->test_tx_ring; | 
 | 	struct e1000_ring *rx_ring = &adapter->test_rx_ring; | 
 | 	struct pci_dev *pdev = adapter->pdev; | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 | 	int i, j, k, l; | 
 | 	int lc; | 
 | 	int good_cnt; | 
 | 	int ret_val = 0; | 
 | 	unsigned long time; | 
 |  | 
 | 	ew32(RDT, rx_ring->count - 1); | 
 |  | 
 | 	/* | 
 | 	 * Calculate the loop count based on the largest descriptor ring | 
 | 	 * The idea is to wrap the largest ring a number of times using 64 | 
 | 	 * send/receive pairs during each loop | 
 | 	 */ | 
 |  | 
 | 	if (rx_ring->count <= tx_ring->count) | 
 | 		lc = ((tx_ring->count / 64) * 2) + 1; | 
 | 	else | 
 | 		lc = ((rx_ring->count / 64) * 2) + 1; | 
 |  | 
 | 	k = 0; | 
 | 	l = 0; | 
 | 	for (j = 0; j <= lc; j++) { /* loop count loop */ | 
 | 		for (i = 0; i < 64; i++) { /* send the packets */ | 
 | 			e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb, | 
 | 						  1024); | 
 | 			pci_dma_sync_single_for_device(pdev, | 
 | 					tx_ring->buffer_info[k].dma, | 
 | 					tx_ring->buffer_info[k].length, | 
 | 					PCI_DMA_TODEVICE); | 
 | 			k++; | 
 | 			if (k == tx_ring->count) | 
 | 				k = 0; | 
 | 		} | 
 | 		ew32(TDT, k); | 
 | 		msleep(200); | 
 | 		time = jiffies; /* set the start time for the receive */ | 
 | 		good_cnt = 0; | 
 | 		do { /* receive the sent packets */ | 
 | 			pci_dma_sync_single_for_cpu(pdev, | 
 | 					rx_ring->buffer_info[l].dma, 2048, | 
 | 					PCI_DMA_FROMDEVICE); | 
 |  | 
 | 			ret_val = e1000_check_lbtest_frame( | 
 | 					rx_ring->buffer_info[l].skb, 1024); | 
 | 			if (!ret_val) | 
 | 				good_cnt++; | 
 | 			l++; | 
 | 			if (l == rx_ring->count) | 
 | 				l = 0; | 
 | 			/* | 
 | 			 * time + 20 msecs (200 msecs on 2.4) is more than | 
 | 			 * enough time to complete the receives, if it's | 
 | 			 * exceeded, break and error off | 
 | 			 */ | 
 | 		} while ((good_cnt < 64) && !time_after(jiffies, time + 20)); | 
 | 		if (good_cnt != 64) { | 
 | 			ret_val = 13; /* ret_val is the same as mis-compare */ | 
 | 			break; | 
 | 		} | 
 | 		if (jiffies >= (time + 20)) { | 
 | 			ret_val = 14; /* error code for time out error */ | 
 | 			break; | 
 | 		} | 
 | 	} /* end loop count loop */ | 
 | 	return ret_val; | 
 | } | 
 |  | 
 | static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) | 
 | { | 
 | 	/* | 
 | 	 * PHY loopback cannot be performed if SoL/IDER | 
 | 	 * sessions are active | 
 | 	 */ | 
 | 	if (e1000_check_reset_block(&adapter->hw)) { | 
 | 		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); | 
 | 		*data = 0; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	*data = e1000_setup_desc_rings(adapter); | 
 | 	if (*data) | 
 | 		goto out; | 
 |  | 
 | 	*data = e1000_setup_loopback_test(adapter); | 
 | 	if (*data) | 
 | 		goto err_loopback; | 
 |  | 
 | 	*data = e1000_run_loopback_test(adapter); | 
 | 	e1000_loopback_cleanup(adapter); | 
 |  | 
 | err_loopback: | 
 | 	e1000_free_desc_rings(adapter); | 
 | out: | 
 | 	return *data; | 
 | } | 
 |  | 
 | static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) | 
 | { | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 |  | 
 | 	*data = 0; | 
 | 	if (hw->phy.media_type == e1000_media_type_internal_serdes) { | 
 | 		int i = 0; | 
 | 		hw->mac.serdes_has_link = false; | 
 |  | 
 | 		/* | 
 | 		 * On some blade server designs, link establishment | 
 | 		 * could take as long as 2-3 minutes | 
 | 		 */ | 
 | 		do { | 
 | 			hw->mac.ops.check_for_link(hw); | 
 | 			if (hw->mac.serdes_has_link) | 
 | 				return *data; | 
 | 			msleep(20); | 
 | 		} while (i++ < 3750); | 
 |  | 
 | 		*data = 1; | 
 | 	} else { | 
 | 		hw->mac.ops.check_for_link(hw); | 
 | 		if (hw->mac.autoneg) | 
 | 			msleep(4000); | 
 |  | 
 | 		if (!(er32(STATUS) & | 
 | 		      E1000_STATUS_LU)) | 
 | 			*data = 1; | 
 | 	} | 
 | 	return *data; | 
 | } | 
 |  | 
 | static int e1000e_get_sset_count(struct net_device *netdev, int sset) | 
 | { | 
 | 	switch (sset) { | 
 | 	case ETH_SS_TEST: | 
 | 		return E1000_TEST_LEN; | 
 | 	case ETH_SS_STATS: | 
 | 		return E1000_STATS_LEN; | 
 | 	default: | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 | } | 
 |  | 
 | static void e1000_diag_test(struct net_device *netdev, | 
 | 			    struct ethtool_test *eth_test, u64 *data) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	u16 autoneg_advertised; | 
 | 	u8 forced_speed_duplex; | 
 | 	u8 autoneg; | 
 | 	bool if_running = netif_running(netdev); | 
 |  | 
 | 	set_bit(__E1000_TESTING, &adapter->state); | 
 | 	if (eth_test->flags == ETH_TEST_FL_OFFLINE) { | 
 | 		/* Offline tests */ | 
 |  | 
 | 		/* save speed, duplex, autoneg settings */ | 
 | 		autoneg_advertised = adapter->hw.phy.autoneg_advertised; | 
 | 		forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; | 
 | 		autoneg = adapter->hw.mac.autoneg; | 
 |  | 
 | 		e_info("offline testing starting\n"); | 
 |  | 
 | 		/* | 
 | 		 * Link test performed before hardware reset so autoneg doesn't | 
 | 		 * interfere with test result | 
 | 		 */ | 
 | 		if (e1000_link_test(adapter, &data[4])) | 
 | 			eth_test->flags |= ETH_TEST_FL_FAILED; | 
 |  | 
 | 		if (if_running) | 
 | 			/* indicate we're in test mode */ | 
 | 			dev_close(netdev); | 
 | 		else | 
 | 			e1000e_reset(adapter); | 
 |  | 
 | 		if (e1000_reg_test(adapter, &data[0])) | 
 | 			eth_test->flags |= ETH_TEST_FL_FAILED; | 
 |  | 
 | 		e1000e_reset(adapter); | 
 | 		if (e1000_eeprom_test(adapter, &data[1])) | 
 | 			eth_test->flags |= ETH_TEST_FL_FAILED; | 
 |  | 
 | 		e1000e_reset(adapter); | 
 | 		if (e1000_intr_test(adapter, &data[2])) | 
 | 			eth_test->flags |= ETH_TEST_FL_FAILED; | 
 |  | 
 | 		e1000e_reset(adapter); | 
 | 		/* make sure the phy is powered up */ | 
 | 		e1000e_power_up_phy(adapter); | 
 | 		if (e1000_loopback_test(adapter, &data[3])) | 
 | 			eth_test->flags |= ETH_TEST_FL_FAILED; | 
 |  | 
 | 		/* restore speed, duplex, autoneg settings */ | 
 | 		adapter->hw.phy.autoneg_advertised = autoneg_advertised; | 
 | 		adapter->hw.mac.forced_speed_duplex = forced_speed_duplex; | 
 | 		adapter->hw.mac.autoneg = autoneg; | 
 |  | 
 | 		/* force this routine to wait until autoneg complete/timeout */ | 
 | 		adapter->hw.phy.autoneg_wait_to_complete = 1; | 
 | 		e1000e_reset(adapter); | 
 | 		adapter->hw.phy.autoneg_wait_to_complete = 0; | 
 |  | 
 | 		clear_bit(__E1000_TESTING, &adapter->state); | 
 | 		if (if_running) | 
 | 			dev_open(netdev); | 
 | 	} else { | 
 | 		e_info("online testing starting\n"); | 
 | 		/* Online tests */ | 
 | 		if (e1000_link_test(adapter, &data[4])) | 
 | 			eth_test->flags |= ETH_TEST_FL_FAILED; | 
 |  | 
 | 		/* Online tests aren't run; pass by default */ | 
 | 		data[0] = 0; | 
 | 		data[1] = 0; | 
 | 		data[2] = 0; | 
 | 		data[3] = 0; | 
 |  | 
 | 		clear_bit(__E1000_TESTING, &adapter->state); | 
 | 	} | 
 | 	msleep_interruptible(4 * 1000); | 
 | } | 
 |  | 
 | static void e1000_get_wol(struct net_device *netdev, | 
 | 			  struct ethtool_wolinfo *wol) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	wol->supported = 0; | 
 | 	wol->wolopts = 0; | 
 |  | 
 | 	if (!(adapter->flags & FLAG_HAS_WOL) || | 
 | 	    !device_can_wakeup(&adapter->pdev->dev)) | 
 | 		return; | 
 |  | 
 | 	wol->supported = WAKE_UCAST | WAKE_MCAST | | 
 | 	                 WAKE_BCAST | WAKE_MAGIC | | 
 | 	                 WAKE_PHY | WAKE_ARP; | 
 |  | 
 | 	/* apply any specific unsupported masks here */ | 
 | 	if (adapter->flags & FLAG_NO_WAKE_UCAST) { | 
 | 		wol->supported &= ~WAKE_UCAST; | 
 |  | 
 | 		if (adapter->wol & E1000_WUFC_EX) | 
 | 			e_err("Interface does not support directed (unicast) " | 
 | 			      "frame wake-up packets\n"); | 
 | 	} | 
 |  | 
 | 	if (adapter->wol & E1000_WUFC_EX) | 
 | 		wol->wolopts |= WAKE_UCAST; | 
 | 	if (adapter->wol & E1000_WUFC_MC) | 
 | 		wol->wolopts |= WAKE_MCAST; | 
 | 	if (adapter->wol & E1000_WUFC_BC) | 
 | 		wol->wolopts |= WAKE_BCAST; | 
 | 	if (adapter->wol & E1000_WUFC_MAG) | 
 | 		wol->wolopts |= WAKE_MAGIC; | 
 | 	if (adapter->wol & E1000_WUFC_LNKC) | 
 | 		wol->wolopts |= WAKE_PHY; | 
 | 	if (adapter->wol & E1000_WUFC_ARP) | 
 | 		wol->wolopts |= WAKE_ARP; | 
 | } | 
 |  | 
 | static int e1000_set_wol(struct net_device *netdev, | 
 | 			 struct ethtool_wolinfo *wol) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	if (!(adapter->flags & FLAG_HAS_WOL) || | 
 | 	    !device_can_wakeup(&adapter->pdev->dev) || | 
 | 	    (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | | 
 | 	                      WAKE_MAGIC | WAKE_PHY | WAKE_ARP))) | 
 | 		return -EOPNOTSUPP; | 
 |  | 
 | 	/* these settings will always override what we currently have */ | 
 | 	adapter->wol = 0; | 
 |  | 
 | 	if (wol->wolopts & WAKE_UCAST) | 
 | 		adapter->wol |= E1000_WUFC_EX; | 
 | 	if (wol->wolopts & WAKE_MCAST) | 
 | 		adapter->wol |= E1000_WUFC_MC; | 
 | 	if (wol->wolopts & WAKE_BCAST) | 
 | 		adapter->wol |= E1000_WUFC_BC; | 
 | 	if (wol->wolopts & WAKE_MAGIC) | 
 | 		adapter->wol |= E1000_WUFC_MAG; | 
 | 	if (wol->wolopts & WAKE_PHY) | 
 | 		adapter->wol |= E1000_WUFC_LNKC; | 
 | 	if (wol->wolopts & WAKE_ARP) | 
 | 		adapter->wol |= E1000_WUFC_ARP; | 
 |  | 
 | 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* toggle LED 4 times per second = 2 "blinks" per second */ | 
 | #define E1000_ID_INTERVAL	(HZ/4) | 
 |  | 
 | /* bit defines for adapter->led_status */ | 
 | #define E1000_LED_ON		0 | 
 |  | 
 | static void e1000e_led_blink_task(struct work_struct *work) | 
 | { | 
 | 	struct e1000_adapter *adapter = container_of(work, | 
 | 	                                struct e1000_adapter, led_blink_task); | 
 |  | 
 | 	if (test_and_change_bit(E1000_LED_ON, &adapter->led_status)) | 
 | 		adapter->hw.mac.ops.led_off(&adapter->hw); | 
 | 	else | 
 | 		adapter->hw.mac.ops.led_on(&adapter->hw); | 
 | } | 
 |  | 
 | static void e1000_led_blink_callback(unsigned long data) | 
 | { | 
 | 	struct e1000_adapter *adapter = (struct e1000_adapter *) data; | 
 |  | 
 | 	schedule_work(&adapter->led_blink_task); | 
 | 	mod_timer(&adapter->blink_timer, jiffies + E1000_ID_INTERVAL); | 
 | } | 
 |  | 
 | static int e1000_phys_id(struct net_device *netdev, u32 data) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 |  | 
 | 	if (!data) | 
 | 		data = INT_MAX; | 
 |  | 
 | 	if ((hw->phy.type == e1000_phy_ife) || | 
 | 	    (hw->mac.type == e1000_pchlan) || | 
 | 	    (hw->mac.type == e1000_82583) || | 
 | 	    (hw->mac.type == e1000_82574)) { | 
 | 		INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task); | 
 | 		if (!adapter->blink_timer.function) { | 
 | 			init_timer(&adapter->blink_timer); | 
 | 			adapter->blink_timer.function = | 
 | 				e1000_led_blink_callback; | 
 | 			adapter->blink_timer.data = (unsigned long) adapter; | 
 | 		} | 
 | 		mod_timer(&adapter->blink_timer, jiffies); | 
 | 		msleep_interruptible(data * 1000); | 
 | 		del_timer_sync(&adapter->blink_timer); | 
 | 		if (hw->phy.type == e1000_phy_ife) | 
 | 			e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0); | 
 | 	} else { | 
 | 		e1000e_blink_led(hw); | 
 | 		msleep_interruptible(data * 1000); | 
 | 	} | 
 |  | 
 | 	hw->mac.ops.led_off(hw); | 
 | 	clear_bit(E1000_LED_ON, &adapter->led_status); | 
 | 	hw->mac.ops.cleanup_led(hw); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_get_coalesce(struct net_device *netdev, | 
 | 			      struct ethtool_coalesce *ec) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 |  | 
 | 	if (adapter->itr_setting <= 3) | 
 | 		ec->rx_coalesce_usecs = adapter->itr_setting; | 
 | 	else | 
 | 		ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_set_coalesce(struct net_device *netdev, | 
 | 			      struct ethtool_coalesce *ec) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	struct e1000_hw *hw = &adapter->hw; | 
 |  | 
 | 	if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) || | 
 | 	    ((ec->rx_coalesce_usecs > 3) && | 
 | 	     (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) || | 
 | 	    (ec->rx_coalesce_usecs == 2)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	if (ec->rx_coalesce_usecs <= 3) { | 
 | 		adapter->itr = 20000; | 
 | 		adapter->itr_setting = ec->rx_coalesce_usecs; | 
 | 	} else { | 
 | 		adapter->itr = (1000000 / ec->rx_coalesce_usecs); | 
 | 		adapter->itr_setting = adapter->itr & ~3; | 
 | 	} | 
 |  | 
 | 	if (adapter->itr_setting != 0) | 
 | 		ew32(ITR, 1000000000 / (adapter->itr * 256)); | 
 | 	else | 
 | 		ew32(ITR, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int e1000_nway_reset(struct net_device *netdev) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	if (netif_running(netdev)) | 
 | 		e1000e_reinit_locked(adapter); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void e1000_get_ethtool_stats(struct net_device *netdev, | 
 | 				    struct ethtool_stats *stats, | 
 | 				    u64 *data) | 
 | { | 
 | 	struct e1000_adapter *adapter = netdev_priv(netdev); | 
 | 	int i; | 
 | 	char *p = NULL; | 
 |  | 
 | 	e1000e_update_stats(adapter); | 
 | 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { | 
 | 		switch (e1000_gstrings_stats[i].type) { | 
 | 		case NETDEV_STATS: | 
 | 			p = (char *) netdev + | 
 | 					e1000_gstrings_stats[i].stat_offset; | 
 | 			break; | 
 | 		case E1000_STATS: | 
 | 			p = (char *) adapter + | 
 | 					e1000_gstrings_stats[i].stat_offset; | 
 | 			break; | 
 | 		} | 
 |  | 
 | 		data[i] = (e1000_gstrings_stats[i].sizeof_stat == | 
 | 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p; | 
 | 	} | 
 | } | 
 |  | 
 | static void e1000_get_strings(struct net_device *netdev, u32 stringset, | 
 | 			      u8 *data) | 
 | { | 
 | 	u8 *p = data; | 
 | 	int i; | 
 |  | 
 | 	switch (stringset) { | 
 | 	case ETH_SS_TEST: | 
 | 		memcpy(data, *e1000_gstrings_test, sizeof(e1000_gstrings_test)); | 
 | 		break; | 
 | 	case ETH_SS_STATS: | 
 | 		for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { | 
 | 			memcpy(p, e1000_gstrings_stats[i].stat_string, | 
 | 			       ETH_GSTRING_LEN); | 
 | 			p += ETH_GSTRING_LEN; | 
 | 		} | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | static const struct ethtool_ops e1000_ethtool_ops = { | 
 | 	.get_settings		= e1000_get_settings, | 
 | 	.set_settings		= e1000_set_settings, | 
 | 	.get_drvinfo		= e1000_get_drvinfo, | 
 | 	.get_regs_len		= e1000_get_regs_len, | 
 | 	.get_regs		= e1000_get_regs, | 
 | 	.get_wol		= e1000_get_wol, | 
 | 	.set_wol		= e1000_set_wol, | 
 | 	.get_msglevel		= e1000_get_msglevel, | 
 | 	.set_msglevel		= e1000_set_msglevel, | 
 | 	.nway_reset		= e1000_nway_reset, | 
 | 	.get_link		= e1000_get_link, | 
 | 	.get_eeprom_len		= e1000_get_eeprom_len, | 
 | 	.get_eeprom		= e1000_get_eeprom, | 
 | 	.set_eeprom		= e1000_set_eeprom, | 
 | 	.get_ringparam		= e1000_get_ringparam, | 
 | 	.set_ringparam		= e1000_set_ringparam, | 
 | 	.get_pauseparam		= e1000_get_pauseparam, | 
 | 	.set_pauseparam		= e1000_set_pauseparam, | 
 | 	.get_rx_csum		= e1000_get_rx_csum, | 
 | 	.set_rx_csum		= e1000_set_rx_csum, | 
 | 	.get_tx_csum		= e1000_get_tx_csum, | 
 | 	.set_tx_csum		= e1000_set_tx_csum, | 
 | 	.get_sg			= ethtool_op_get_sg, | 
 | 	.set_sg			= ethtool_op_set_sg, | 
 | 	.get_tso		= ethtool_op_get_tso, | 
 | 	.set_tso		= e1000_set_tso, | 
 | 	.self_test		= e1000_diag_test, | 
 | 	.get_strings		= e1000_get_strings, | 
 | 	.phys_id		= e1000_phys_id, | 
 | 	.get_ethtool_stats	= e1000_get_ethtool_stats, | 
 | 	.get_sset_count		= e1000e_get_sset_count, | 
 | 	.get_coalesce		= e1000_get_coalesce, | 
 | 	.set_coalesce		= e1000_set_coalesce, | 
 | 	.get_flags		= ethtool_op_get_flags, | 
 | 	.set_flags		= ethtool_op_set_flags, | 
 | }; | 
 |  | 
 | void e1000e_set_ethtool_ops(struct net_device *netdev) | 
 | { | 
 | 	SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops); | 
 | } |