blob: e67cf15e9c3961af697067c4007e78ffd359da4b [file] [log] [blame]
menu "Fusion MPT device support"
config FUSION
bool
default n
config FUSION_SPI
tristate "Fusion MPT ScsiHost drivers for SPI"
depends on PCI && SCSI
select FUSION
---help---
SCSI HOST support for a parallel SCSI host adapters.
List of supported controllers:
LSI53C1020
LSI53C1020A
LSI53C1030
LSI53C1035
config FUSION_FC
tristate "Fusion MPT ScsiHost drivers for FC"
depends on PCI && SCSI
select FUSION
select SCSI_FC_ATTRS
---help---
SCSI HOST support for a Fiber Channel host adapters.
List of supported controllers:
LSIFC909
LSIFC919
LSIFC919X
LSIFC929
LSIFC929X
LSIFC929XL
config FUSION_SAS
tristate "Fusion MPT ScsiHost drivers for SAS"
depends on PCI && SCSI
select FUSION
select SCSI_SAS_ATTRS
---help---
SCSI HOST support for a SAS host adapters.
List of supported controllers:
LSISAS1064
LSISAS1066
LSISAS1068
LSISAS1064E
LSISAS1066E
LSISAS1068E
config FUSION_MAX_SGE
int "Maximum number of scatter gather entries (16 - 128)"
depends on FUSION
default "128"
range 16 128
help
This option allows you to specify the maximum number of scatter-
gather entries per I/O. The driver default is 128, which matches
SCSI_MAX_PHYS_SEGMENTS. However, it may decreased down to 16.
Decreasing this parameter will reduce memory requirements
on a per controller instance.
config FUSION_CTL
tristate "Fusion MPT misc device (ioctl) driver"
depends on FUSION_SPI || FUSION_FC
---help---
The Fusion MPT misc device driver provides specialized control
of MPT adapters via system ioctl calls. Use of ioctl calls to
the MPT driver requires that you create and use a misc device
node ala:
mknod /dev/mptctl c 10 240
One use of this ioctl interface is to perform an upgrade (reflash)
of the MPT adapter firmware. Refer to readme file(s) distributed
with the Fusion MPT linux driver for additional details.
If enabled by saying M to this, a driver named: mptctl
will be compiled.
If unsure whether you really want or need this, say N.
config FUSION_LAN
tristate "Fusion MPT LAN driver"
depends on FUSION_FC && NET_FC
---help---
This module supports LAN IP traffic over Fibre Channel port(s)
on Fusion MPT compatible hardware (LSIFC9xx chips).
The physical interface used is defined in RFC 2625.
Please refer to that document for details.
Installing this driver requires the knowledge to configure and
activate a new network interface, "fc0", using standard Linux tools.
If enabled by saying M to this, a driver named: mptlan
will be compiled.
If unsure whether you really want or need this, say N.
endmenu