| // SPDX-License-Identifier: GPL-2.0+ | 
 | /* | 
 |  * NEC NL8048HL11 Panel Driver | 
 |  * | 
 |  * Copyright (C) 2019 Texas Instruments Incorporated | 
 |  * | 
 |  * Based on the omapdrm-specific panel-nec-nl8048hl11 driver | 
 |  * | 
 |  * Copyright (C) 2010 Texas Instruments Incorporated | 
 |  * Author: Erik Gilling <konkers@android.com> | 
 |  */ | 
 |  | 
 | #include <linux/delay.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/module.h> | 
 | #include <linux/pm.h> | 
 | #include <linux/spi/spi.h> | 
 |  | 
 | #include <drm/drm_connector.h> | 
 | #include <drm/drm_modes.h> | 
 | #include <drm/drm_panel.h> | 
 |  | 
 | struct nl8048_panel { | 
 | 	struct drm_panel panel; | 
 |  | 
 | 	struct spi_device *spi; | 
 | 	struct gpio_desc *reset_gpio; | 
 | }; | 
 |  | 
 | #define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel) | 
 |  | 
 | static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr, | 
 | 			unsigned char value) | 
 | { | 
 | 	u8 data[4] = { value, 0x01, addr, 0x00 }; | 
 | 	int ret; | 
 |  | 
 | 	ret = spi_write(lcd->spi, data, sizeof(data)); | 
 | 	if (ret) | 
 | 		dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n", | 
 | 			addr, ret); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int nl8048_init(struct nl8048_panel *lcd) | 
 | { | 
 | 	static const struct { | 
 | 		unsigned char addr; | 
 | 		unsigned char data; | 
 | 	} nl8048_init_seq[] = { | 
 | 		{   3, 0x01 }, {   0, 0x00 }, {   1, 0x01 }, {   4, 0x00 }, | 
 | 		{   5, 0x14 }, {   6, 0x24 }, {  16, 0xd7 }, {  17, 0x00 }, | 
 | 		{  18, 0x00 }, {  19, 0x55 }, {  20, 0x01 }, {  21, 0x70 }, | 
 | 		{  22, 0x1e }, {  23, 0x25 }, {  24, 0x25 }, {  25, 0x02 }, | 
 | 		{  26, 0x02 }, {  27, 0xa0 }, {  32, 0x2f }, {  33, 0x0f }, | 
 | 		{  34, 0x0f }, {  35, 0x0f }, {  36, 0x0f }, {  37, 0x0f }, | 
 | 		{  38, 0x0f }, {  39, 0x00 }, {  40, 0x02 }, {  41, 0x02 }, | 
 | 		{  42, 0x02 }, {  43, 0x0f }, {  44, 0x0f }, {  45, 0x0f }, | 
 | 		{  46, 0x0f }, {  47, 0x0f }, {  48, 0x0f }, {  49, 0x0f }, | 
 | 		{  50, 0x00 }, {  51, 0x02 }, {  52, 0x02 }, {  53, 0x02 }, | 
 | 		{  80, 0x0c }, {  83, 0x42 }, {  84, 0x42 }, {  85, 0x41 }, | 
 | 		{  86, 0x14 }, {  89, 0x88 }, {  90, 0x01 }, {  91, 0x00 }, | 
 | 		{  92, 0x02 }, {  93, 0x0c }, {  94, 0x1c }, {  95, 0x27 }, | 
 | 		{  98, 0x49 }, {  99, 0x27 }, { 102, 0x76 }, { 103, 0x27 }, | 
 | 		{ 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c }, | 
 | 		{ 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 }, | 
 | 		{ 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 }, | 
 | 		{ 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 }, | 
 | 		{ 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 }, | 
 | 		{ 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 }, | 
 | 		{ 157, 0x00 }, | 
 | 	}; | 
 |  | 
 | 	unsigned int i; | 
 | 	int ret; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) { | 
 | 		ret = nl8048_write(lcd, nl8048_init_seq[i].addr, | 
 | 				   nl8048_init_seq[i].data); | 
 | 		if (ret < 0) | 
 | 			return ret; | 
 | 	} | 
 |  | 
 | 	udelay(20); | 
 |  | 
 | 	return nl8048_write(lcd, 2, 0x00); | 
 | } | 
 |  | 
 | static int nl8048_disable(struct drm_panel *panel) | 
 | { | 
 | 	struct nl8048_panel *lcd = to_nl8048_device(panel); | 
 |  | 
 | 	gpiod_set_value_cansleep(lcd->reset_gpio, 0); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nl8048_enable(struct drm_panel *panel) | 
 | { | 
 | 	struct nl8048_panel *lcd = to_nl8048_device(panel); | 
 |  | 
 | 	gpiod_set_value_cansleep(lcd->reset_gpio, 1); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct drm_display_mode nl8048_mode = { | 
 | 	/*  NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */ | 
 | 	.clock	= 23800, | 
 | 	.hdisplay = 800, | 
 | 	.hsync_start = 800 + 6, | 
 | 	.hsync_end = 800 + 6 + 1, | 
 | 	.htotal = 800 + 6 + 1 + 4, | 
 | 	.vdisplay = 480, | 
 | 	.vsync_start = 480 + 3, | 
 | 	.vsync_end = 480 + 3 + 1, | 
 | 	.vtotal = 480 + 3 + 1 + 4, | 
 | 	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, | 
 | 	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, | 
 | 	.width_mm = 89, | 
 | 	.height_mm = 53, | 
 | }; | 
 |  | 
 | static int nl8048_get_modes(struct drm_panel *panel, | 
 | 			    struct drm_connector *connector) | 
 | { | 
 | 	struct drm_display_mode *mode; | 
 |  | 
 | 	mode = drm_mode_duplicate(connector->dev, &nl8048_mode); | 
 | 	if (!mode) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	drm_mode_set_name(mode); | 
 | 	drm_mode_probed_add(connector, mode); | 
 |  | 
 | 	connector->display_info.width_mm = nl8048_mode.width_mm; | 
 | 	connector->display_info.height_mm = nl8048_mode.height_mm; | 
 | 	connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH | 
 | 					  | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE | 
 | 					  | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE; | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | static const struct drm_panel_funcs nl8048_funcs = { | 
 | 	.disable = nl8048_disable, | 
 | 	.enable = nl8048_enable, | 
 | 	.get_modes = nl8048_get_modes, | 
 | }; | 
 |  | 
 | static int __maybe_unused nl8048_suspend(struct device *dev) | 
 | { | 
 | 	struct nl8048_panel *lcd = dev_get_drvdata(dev); | 
 |  | 
 | 	nl8048_write(lcd, 2, 0x01); | 
 | 	msleep(40); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __maybe_unused nl8048_resume(struct device *dev) | 
 | { | 
 | 	struct nl8048_panel *lcd = dev_get_drvdata(dev); | 
 |  | 
 | 	/* Reinitialize the panel. */ | 
 | 	spi_setup(lcd->spi); | 
 | 	nl8048_write(lcd, 2, 0x00); | 
 | 	nl8048_init(lcd); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume); | 
 |  | 
 | static int nl8048_probe(struct spi_device *spi) | 
 | { | 
 | 	struct nl8048_panel *lcd; | 
 | 	int ret; | 
 |  | 
 | 	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); | 
 | 	if (!lcd) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	spi_set_drvdata(spi, lcd); | 
 | 	lcd->spi = spi; | 
 |  | 
 | 	lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); | 
 | 	if (IS_ERR(lcd->reset_gpio)) { | 
 | 		dev_err(&spi->dev, "failed to parse reset gpio\n"); | 
 | 		return PTR_ERR(lcd->reset_gpio); | 
 | 	} | 
 |  | 
 | 	spi->mode = SPI_MODE_0; | 
 | 	spi->bits_per_word = 32; | 
 |  | 
 | 	ret = spi_setup(spi); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&spi->dev, "failed to setup SPI: %d\n", ret); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	ret = nl8048_init(lcd); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	drm_panel_init(&lcd->panel, &lcd->spi->dev, &nl8048_funcs, | 
 | 		       DRM_MODE_CONNECTOR_DPI); | 
 |  | 
 | 	drm_panel_add(&lcd->panel); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int nl8048_remove(struct spi_device *spi) | 
 | { | 
 | 	struct nl8048_panel *lcd = spi_get_drvdata(spi); | 
 |  | 
 | 	drm_panel_remove(&lcd->panel); | 
 | 	drm_panel_disable(&lcd->panel); | 
 | 	drm_panel_unprepare(&lcd->panel); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct of_device_id nl8048_of_match[] = { | 
 | 	{ .compatible = "nec,nl8048hl11", }, | 
 | 	{ /* sentinel */ }, | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(of, nl8048_of_match); | 
 |  | 
 | static const struct spi_device_id nl8048_ids[] = { | 
 | 	{ "nl8048hl11", 0 }, | 
 | 	{ /* sentinel */ } | 
 | }; | 
 |  | 
 | MODULE_DEVICE_TABLE(spi, nl8048_ids); | 
 |  | 
 | static struct spi_driver nl8048_driver = { | 
 | 	.probe		= nl8048_probe, | 
 | 	.remove		= nl8048_remove, | 
 | 	.id_table	= nl8048_ids, | 
 | 	.driver		= { | 
 | 		.name	= "panel-nec-nl8048hl11", | 
 | 		.pm	= &nl8048_pm_ops, | 
 | 		.of_match_table = nl8048_of_match, | 
 | 	}, | 
 | }; | 
 |  | 
 | module_spi_driver(nl8048_driver); | 
 |  | 
 | MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); | 
 | MODULE_DESCRIPTION("NEC-NL8048HL11 Driver"); | 
 | MODULE_LICENSE("GPL"); |