|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * NVM helpers | 
|  | * | 
|  | * Copyright (C) 2020, Intel Corporation | 
|  | * Author: Mika Westerberg <mika.westerberg@linux.intel.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/idr.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/vmalloc.h> | 
|  |  | 
|  | #include "tb.h" | 
|  |  | 
|  | static DEFINE_IDA(nvm_ida); | 
|  |  | 
|  | /** | 
|  | * tb_nvm_alloc() - Allocate new NVM structure | 
|  | * @dev: Device owning the NVM | 
|  | * | 
|  | * Allocates new NVM structure with unique @id and returns it. In case | 
|  | * of error returns ERR_PTR(). | 
|  | */ | 
|  | struct tb_nvm *tb_nvm_alloc(struct device *dev) | 
|  | { | 
|  | struct tb_nvm *nvm; | 
|  | int ret; | 
|  |  | 
|  | nvm = kzalloc(sizeof(*nvm), GFP_KERNEL); | 
|  | if (!nvm) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | ret = ida_simple_get(&nvm_ida, 0, 0, GFP_KERNEL); | 
|  | if (ret < 0) { | 
|  | kfree(nvm); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | nvm->id = ret; | 
|  | nvm->dev = dev; | 
|  |  | 
|  | return nvm; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tb_nvm_add_active() - Adds active NVMem device to NVM | 
|  | * @nvm: NVM structure | 
|  | * @size: Size of the active NVM in bytes | 
|  | * @reg_read: Pointer to the function to read the NVM (passed directly to the | 
|  | *	      NVMem device) | 
|  | * | 
|  | * Registers new active NVmem device for @nvm. The @reg_read is called | 
|  | * directly from NVMem so it must handle possible concurrent access if | 
|  | * needed. The first parameter passed to @reg_read is @nvm structure. | 
|  | * Returns %0 in success and negative errno otherwise. | 
|  | */ | 
|  | int tb_nvm_add_active(struct tb_nvm *nvm, size_t size, nvmem_reg_read_t reg_read) | 
|  | { | 
|  | struct nvmem_config config; | 
|  | struct nvmem_device *nvmem; | 
|  |  | 
|  | memset(&config, 0, sizeof(config)); | 
|  |  | 
|  | config.name = "nvm_active"; | 
|  | config.reg_read = reg_read; | 
|  | config.read_only = true; | 
|  | config.id = nvm->id; | 
|  | config.stride = 4; | 
|  | config.word_size = 4; | 
|  | config.size = size; | 
|  | config.dev = nvm->dev; | 
|  | config.owner = THIS_MODULE; | 
|  | config.priv = nvm; | 
|  |  | 
|  | nvmem = nvmem_register(&config); | 
|  | if (IS_ERR(nvmem)) | 
|  | return PTR_ERR(nvmem); | 
|  |  | 
|  | nvm->active = nvmem; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tb_nvm_write_buf() - Write data to @nvm buffer | 
|  | * @nvm: NVM structure | 
|  | * @offset: Offset where to write the data | 
|  | * @val: Data buffer to write | 
|  | * @bytes: Number of bytes to write | 
|  | * | 
|  | * Helper function to cache the new NVM image before it is actually | 
|  | * written to the flash. Copies @bytes from @val to @nvm->buf starting | 
|  | * from @offset. | 
|  | */ | 
|  | int tb_nvm_write_buf(struct tb_nvm *nvm, unsigned int offset, void *val, | 
|  | size_t bytes) | 
|  | { | 
|  | if (!nvm->buf) { | 
|  | nvm->buf = vmalloc(NVM_MAX_SIZE); | 
|  | if (!nvm->buf) | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | nvm->flushed = false; | 
|  | nvm->buf_data_size = offset + bytes; | 
|  | memcpy(nvm->buf + offset, val, bytes); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tb_nvm_add_non_active() - Adds non-active NVMem device to NVM | 
|  | * @nvm: NVM structure | 
|  | * @size: Size of the non-active NVM in bytes | 
|  | * @reg_write: Pointer to the function to write the NVM (passed directly | 
|  | *	       to the NVMem device) | 
|  | * | 
|  | * Registers new non-active NVmem device for @nvm. The @reg_write is called | 
|  | * directly from NVMem so it must handle possible concurrent access if | 
|  | * needed. The first parameter passed to @reg_write is @nvm structure. | 
|  | * Returns %0 in success and negative errno otherwise. | 
|  | */ | 
|  | int tb_nvm_add_non_active(struct tb_nvm *nvm, size_t size, | 
|  | nvmem_reg_write_t reg_write) | 
|  | { | 
|  | struct nvmem_config config; | 
|  | struct nvmem_device *nvmem; | 
|  |  | 
|  | memset(&config, 0, sizeof(config)); | 
|  |  | 
|  | config.name = "nvm_non_active"; | 
|  | config.reg_write = reg_write; | 
|  | config.root_only = true; | 
|  | config.id = nvm->id; | 
|  | config.stride = 4; | 
|  | config.word_size = 4; | 
|  | config.size = size; | 
|  | config.dev = nvm->dev; | 
|  | config.owner = THIS_MODULE; | 
|  | config.priv = nvm; | 
|  |  | 
|  | nvmem = nvmem_register(&config); | 
|  | if (IS_ERR(nvmem)) | 
|  | return PTR_ERR(nvmem); | 
|  |  | 
|  | nvm->non_active = nvmem; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tb_nvm_free() - Release NVM and its resources | 
|  | * @nvm: NVM structure to release | 
|  | * | 
|  | * Releases NVM and the NVMem devices if they were registered. | 
|  | */ | 
|  | void tb_nvm_free(struct tb_nvm *nvm) | 
|  | { | 
|  | if (nvm) { | 
|  | if (nvm->non_active) | 
|  | nvmem_unregister(nvm->non_active); | 
|  | if (nvm->active) | 
|  | nvmem_unregister(nvm->active); | 
|  | vfree(nvm->buf); | 
|  | ida_simple_remove(&nvm_ida, nvm->id); | 
|  | } | 
|  | kfree(nvm); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tb_nvm_read_data() - Read data from NVM | 
|  | * @address: Start address on the flash | 
|  | * @buf: Buffer where the read data is copied | 
|  | * @size: Size of the buffer in bytes | 
|  | * @retries: Number of retries if block read fails | 
|  | * @read_block: Function that reads block from the flash | 
|  | * @read_block_data: Data passsed to @read_block | 
|  | * | 
|  | * This is a generic function that reads data from NVM or NVM like | 
|  | * device. | 
|  | * | 
|  | * Returns %0 on success and negative errno otherwise. | 
|  | */ | 
|  | int tb_nvm_read_data(unsigned int address, void *buf, size_t size, | 
|  | unsigned int retries, read_block_fn read_block, | 
|  | void *read_block_data) | 
|  | { | 
|  | do { | 
|  | unsigned int dwaddress, dwords, offset; | 
|  | u8 data[NVM_DATA_DWORDS * 4]; | 
|  | size_t nbytes; | 
|  | int ret; | 
|  |  | 
|  | offset = address & 3; | 
|  | nbytes = min_t(size_t, size + offset, NVM_DATA_DWORDS * 4); | 
|  |  | 
|  | dwaddress = address / 4; | 
|  | dwords = ALIGN(nbytes, 4) / 4; | 
|  |  | 
|  | ret = read_block(read_block_data, dwaddress, data, dwords); | 
|  | if (ret) { | 
|  | if (ret != -ENODEV && retries--) | 
|  | continue; | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | nbytes -= offset; | 
|  | memcpy(buf, data + offset, nbytes); | 
|  |  | 
|  | size -= nbytes; | 
|  | address += nbytes; | 
|  | buf += nbytes; | 
|  | } while (size > 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tb_nvm_write_data() - Write data to NVM | 
|  | * @address: Start address on the flash | 
|  | * @buf: Buffer where the data is copied from | 
|  | * @size: Size of the buffer in bytes | 
|  | * @retries: Number of retries if the block write fails | 
|  | * @write_block: Function that writes block to the flash | 
|  | * @write_block_data: Data passwd to @write_block | 
|  | * | 
|  | * This is generic function that writes data to NVM or NVM like device. | 
|  | * | 
|  | * Returns %0 on success and negative errno otherwise. | 
|  | */ | 
|  | int tb_nvm_write_data(unsigned int address, const void *buf, size_t size, | 
|  | unsigned int retries, write_block_fn write_block, | 
|  | void *write_block_data) | 
|  | { | 
|  | do { | 
|  | unsigned int offset, dwaddress; | 
|  | u8 data[NVM_DATA_DWORDS * 4]; | 
|  | size_t nbytes; | 
|  | int ret; | 
|  |  | 
|  | offset = address & 3; | 
|  | nbytes = min_t(u32, size + offset, NVM_DATA_DWORDS * 4); | 
|  |  | 
|  | memcpy(data + offset, buf, nbytes); | 
|  |  | 
|  | dwaddress = address / 4; | 
|  | ret = write_block(write_block_data, dwaddress, data, nbytes / 4); | 
|  | if (ret) { | 
|  | if (ret == -ETIMEDOUT) { | 
|  | if (retries--) | 
|  | continue; | 
|  | ret = -EIO; | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | size -= nbytes; | 
|  | address += nbytes; | 
|  | buf += nbytes; | 
|  | } while (size > 0); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void tb_nvm_exit(void) | 
|  | { | 
|  | ida_destroy(&nvm_ida); | 
|  | } |