|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * PCI Express I/O Virtualization (IOV) support | 
|  | *   Single Root IOV 1.0 | 
|  | *   Address Translation Service 1.0 | 
|  | * | 
|  | * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com> | 
|  | */ | 
|  |  | 
|  | #include <linux/pci.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/delay.h> | 
|  | #include "pci.h" | 
|  |  | 
|  | #define VIRTFN_ID_LEN	16 | 
|  |  | 
|  | int pci_iov_virtfn_bus(struct pci_dev *dev, int vf_id) | 
|  | { | 
|  | if (!dev->is_physfn) | 
|  | return -EINVAL; | 
|  | return dev->bus->number + ((dev->devfn + dev->sriov->offset + | 
|  | dev->sriov->stride * vf_id) >> 8); | 
|  | } | 
|  |  | 
|  | int pci_iov_virtfn_devfn(struct pci_dev *dev, int vf_id) | 
|  | { | 
|  | if (!dev->is_physfn) | 
|  | return -EINVAL; | 
|  | return (dev->devfn + dev->sriov->offset + | 
|  | dev->sriov->stride * vf_id) & 0xff; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Per SR-IOV spec sec 3.3.10 and 3.3.11, First VF Offset and VF Stride may | 
|  | * change when NumVFs changes. | 
|  | * | 
|  | * Update iov->offset and iov->stride when NumVFs is written. | 
|  | */ | 
|  | static inline void pci_iov_set_numvfs(struct pci_dev *dev, int nr_virtfn) | 
|  | { | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  |  | 
|  | pci_write_config_word(dev, iov->pos + PCI_SRIOV_NUM_VF, nr_virtfn); | 
|  | pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_OFFSET, &iov->offset); | 
|  | pci_read_config_word(dev, iov->pos + PCI_SRIOV_VF_STRIDE, &iov->stride); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The PF consumes one bus number.  NumVFs, First VF Offset, and VF Stride | 
|  | * determine how many additional bus numbers will be consumed by VFs. | 
|  | * | 
|  | * Iterate over all valid NumVFs, validate offset and stride, and calculate | 
|  | * the maximum number of bus numbers that could ever be required. | 
|  | */ | 
|  | static int compute_max_vf_buses(struct pci_dev *dev) | 
|  | { | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  | int nr_virtfn, busnr, rc = 0; | 
|  |  | 
|  | for (nr_virtfn = iov->total_VFs; nr_virtfn; nr_virtfn--) { | 
|  | pci_iov_set_numvfs(dev, nr_virtfn); | 
|  | if (!iov->offset || (nr_virtfn > 1 && !iov->stride)) { | 
|  | rc = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | busnr = pci_iov_virtfn_bus(dev, nr_virtfn - 1); | 
|  | if (busnr > iov->max_VF_buses) | 
|  | iov->max_VF_buses = busnr; | 
|  | } | 
|  |  | 
|  | out: | 
|  | pci_iov_set_numvfs(dev, 0); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static struct pci_bus *virtfn_add_bus(struct pci_bus *bus, int busnr) | 
|  | { | 
|  | struct pci_bus *child; | 
|  |  | 
|  | if (bus->number == busnr) | 
|  | return bus; | 
|  |  | 
|  | child = pci_find_bus(pci_domain_nr(bus), busnr); | 
|  | if (child) | 
|  | return child; | 
|  |  | 
|  | child = pci_add_new_bus(bus, NULL, busnr); | 
|  | if (!child) | 
|  | return NULL; | 
|  |  | 
|  | pci_bus_insert_busn_res(child, busnr, busnr); | 
|  |  | 
|  | return child; | 
|  | } | 
|  |  | 
|  | static void virtfn_remove_bus(struct pci_bus *physbus, struct pci_bus *virtbus) | 
|  | { | 
|  | if (physbus != virtbus && list_empty(&virtbus->devices)) | 
|  | pci_remove_bus(virtbus); | 
|  | } | 
|  |  | 
|  | resource_size_t pci_iov_resource_size(struct pci_dev *dev, int resno) | 
|  | { | 
|  | if (!dev->is_physfn) | 
|  | return 0; | 
|  |  | 
|  | return dev->sriov->barsz[resno - PCI_IOV_RESOURCES]; | 
|  | } | 
|  |  | 
|  | static void pci_read_vf_config_common(struct pci_dev *virtfn) | 
|  | { | 
|  | struct pci_dev *physfn = virtfn->physfn; | 
|  |  | 
|  | /* | 
|  | * Some config registers are the same across all associated VFs. | 
|  | * Read them once from VF0 so we can skip reading them from the | 
|  | * other VFs. | 
|  | * | 
|  | * PCIe r4.0, sec 9.3.4.1, technically doesn't require all VFs to | 
|  | * have the same Revision ID and Subsystem ID, but we assume they | 
|  | * do. | 
|  | */ | 
|  | pci_read_config_dword(virtfn, PCI_CLASS_REVISION, | 
|  | &physfn->sriov->class); | 
|  | pci_read_config_byte(virtfn, PCI_HEADER_TYPE, | 
|  | &physfn->sriov->hdr_type); | 
|  | pci_read_config_word(virtfn, PCI_SUBSYSTEM_VENDOR_ID, | 
|  | &physfn->sriov->subsystem_vendor); | 
|  | pci_read_config_word(virtfn, PCI_SUBSYSTEM_ID, | 
|  | &physfn->sriov->subsystem_device); | 
|  |  | 
|  | physfn->sriov->cfg_size = pci_cfg_space_size(virtfn); | 
|  | } | 
|  |  | 
|  | int pci_iov_add_virtfn(struct pci_dev *dev, int id) | 
|  | { | 
|  | int i; | 
|  | int rc = -ENOMEM; | 
|  | u64 size; | 
|  | char buf[VIRTFN_ID_LEN]; | 
|  | struct pci_dev *virtfn; | 
|  | struct resource *res; | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | bus = virtfn_add_bus(dev->bus, pci_iov_virtfn_bus(dev, id)); | 
|  | if (!bus) | 
|  | goto failed; | 
|  |  | 
|  | virtfn = pci_alloc_dev(bus); | 
|  | if (!virtfn) | 
|  | goto failed0; | 
|  |  | 
|  | virtfn->devfn = pci_iov_virtfn_devfn(dev, id); | 
|  | virtfn->vendor = dev->vendor; | 
|  | virtfn->device = iov->vf_device; | 
|  | virtfn->is_virtfn = 1; | 
|  | virtfn->physfn = pci_dev_get(dev); | 
|  |  | 
|  | if (id == 0) | 
|  | pci_read_vf_config_common(virtfn); | 
|  |  | 
|  | rc = pci_setup_device(virtfn); | 
|  | if (rc) | 
|  | goto failed1; | 
|  |  | 
|  | virtfn->dev.parent = dev->dev.parent; | 
|  | virtfn->multifunction = 0; | 
|  |  | 
|  | for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | 
|  | res = &dev->resource[i + PCI_IOV_RESOURCES]; | 
|  | if (!res->parent) | 
|  | continue; | 
|  | virtfn->resource[i].name = pci_name(virtfn); | 
|  | virtfn->resource[i].flags = res->flags; | 
|  | size = pci_iov_resource_size(dev, i + PCI_IOV_RESOURCES); | 
|  | virtfn->resource[i].start = res->start + size * id; | 
|  | virtfn->resource[i].end = virtfn->resource[i].start + size - 1; | 
|  | rc = request_resource(res, &virtfn->resource[i]); | 
|  | BUG_ON(rc); | 
|  | } | 
|  |  | 
|  | pci_device_add(virtfn, virtfn->bus); | 
|  |  | 
|  | sprintf(buf, "virtfn%u", id); | 
|  | rc = sysfs_create_link(&dev->dev.kobj, &virtfn->dev.kobj, buf); | 
|  | if (rc) | 
|  | goto failed2; | 
|  | rc = sysfs_create_link(&virtfn->dev.kobj, &dev->dev.kobj, "physfn"); | 
|  | if (rc) | 
|  | goto failed3; | 
|  |  | 
|  | kobject_uevent(&virtfn->dev.kobj, KOBJ_CHANGE); | 
|  |  | 
|  | pci_bus_add_device(virtfn); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | failed3: | 
|  | sysfs_remove_link(&dev->dev.kobj, buf); | 
|  | failed2: | 
|  | pci_stop_and_remove_bus_device(virtfn); | 
|  | failed1: | 
|  | pci_dev_put(dev); | 
|  | failed0: | 
|  | virtfn_remove_bus(dev->bus, bus); | 
|  | failed: | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | void pci_iov_remove_virtfn(struct pci_dev *dev, int id) | 
|  | { | 
|  | char buf[VIRTFN_ID_LEN]; | 
|  | struct pci_dev *virtfn; | 
|  |  | 
|  | virtfn = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), | 
|  | pci_iov_virtfn_bus(dev, id), | 
|  | pci_iov_virtfn_devfn(dev, id)); | 
|  | if (!virtfn) | 
|  | return; | 
|  |  | 
|  | sprintf(buf, "virtfn%u", id); | 
|  | sysfs_remove_link(&dev->dev.kobj, buf); | 
|  | /* | 
|  | * pci_stop_dev() could have been called for this virtfn already, | 
|  | * so the directory for the virtfn may have been removed before. | 
|  | * Double check to avoid spurious sysfs warnings. | 
|  | */ | 
|  | if (virtfn->dev.kobj.sd) | 
|  | sysfs_remove_link(&virtfn->dev.kobj, "physfn"); | 
|  |  | 
|  | pci_stop_and_remove_bus_device(virtfn); | 
|  | virtfn_remove_bus(dev->bus, virtfn->bus); | 
|  |  | 
|  | /* balance pci_get_domain_bus_and_slot() */ | 
|  | pci_dev_put(virtfn); | 
|  | pci_dev_put(dev); | 
|  | } | 
|  |  | 
|  | int __weak pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int __weak pcibios_sriov_disable(struct pci_dev *pdev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int sriov_add_vfs(struct pci_dev *dev, u16 num_vfs) | 
|  | { | 
|  | unsigned int i; | 
|  | int rc; | 
|  |  | 
|  | if (dev->no_vf_scan) | 
|  | return 0; | 
|  |  | 
|  | for (i = 0; i < num_vfs; i++) { | 
|  | rc = pci_iov_add_virtfn(dev, i); | 
|  | if (rc) | 
|  | goto failed; | 
|  | } | 
|  | return 0; | 
|  | failed: | 
|  | while (i--) | 
|  | pci_iov_remove_virtfn(dev, i); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int sriov_enable(struct pci_dev *dev, int nr_virtfn) | 
|  | { | 
|  | int rc; | 
|  | int i; | 
|  | int nres; | 
|  | u16 initial; | 
|  | struct resource *res; | 
|  | struct pci_dev *pdev; | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  | int bars = 0; | 
|  | int bus; | 
|  |  | 
|  | if (!nr_virtfn) | 
|  | return 0; | 
|  |  | 
|  | if (iov->num_VFs) | 
|  | return -EINVAL; | 
|  |  | 
|  | pci_read_config_word(dev, iov->pos + PCI_SRIOV_INITIAL_VF, &initial); | 
|  | if (initial > iov->total_VFs || | 
|  | (!(iov->cap & PCI_SRIOV_CAP_VFM) && (initial != iov->total_VFs))) | 
|  | return -EIO; | 
|  |  | 
|  | if (nr_virtfn < 0 || nr_virtfn > iov->total_VFs || | 
|  | (!(iov->cap & PCI_SRIOV_CAP_VFM) && (nr_virtfn > initial))) | 
|  | return -EINVAL; | 
|  |  | 
|  | nres = 0; | 
|  | for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | 
|  | bars |= (1 << (i + PCI_IOV_RESOURCES)); | 
|  | res = &dev->resource[i + PCI_IOV_RESOURCES]; | 
|  | if (res->parent) | 
|  | nres++; | 
|  | } | 
|  | if (nres != iov->nres) { | 
|  | pci_err(dev, "not enough MMIO resources for SR-IOV\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | bus = pci_iov_virtfn_bus(dev, nr_virtfn - 1); | 
|  | if (bus > dev->bus->busn_res.end) { | 
|  | pci_err(dev, "can't enable %d VFs (bus %02x out of range of %pR)\n", | 
|  | nr_virtfn, bus, &dev->bus->busn_res); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (pci_enable_resources(dev, bars)) { | 
|  | pci_err(dev, "SR-IOV: IOV BARS not allocated\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (iov->link != dev->devfn) { | 
|  | pdev = pci_get_slot(dev->bus, iov->link); | 
|  | if (!pdev) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!pdev->is_physfn) { | 
|  | pci_dev_put(pdev); | 
|  | return -ENOSYS; | 
|  | } | 
|  |  | 
|  | rc = sysfs_create_link(&dev->dev.kobj, | 
|  | &pdev->dev.kobj, "dep_link"); | 
|  | pci_dev_put(pdev); | 
|  | if (rc) | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | iov->initial_VFs = initial; | 
|  | if (nr_virtfn < initial) | 
|  | initial = nr_virtfn; | 
|  |  | 
|  | rc = pcibios_sriov_enable(dev, initial); | 
|  | if (rc) { | 
|  | pci_err(dev, "failure %d from pcibios_sriov_enable()\n", rc); | 
|  | goto err_pcibios; | 
|  | } | 
|  |  | 
|  | pci_iov_set_numvfs(dev, nr_virtfn); | 
|  | iov->ctrl |= PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE; | 
|  | pci_cfg_access_lock(dev); | 
|  | pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | 
|  | msleep(100); | 
|  | pci_cfg_access_unlock(dev); | 
|  |  | 
|  | rc = sriov_add_vfs(dev, initial); | 
|  | if (rc) | 
|  | goto err_pcibios; | 
|  |  | 
|  | kobject_uevent(&dev->dev.kobj, KOBJ_CHANGE); | 
|  | iov->num_VFs = nr_virtfn; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_pcibios: | 
|  | iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); | 
|  | pci_cfg_access_lock(dev); | 
|  | pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | 
|  | ssleep(1); | 
|  | pci_cfg_access_unlock(dev); | 
|  |  | 
|  | pcibios_sriov_disable(dev); | 
|  |  | 
|  | if (iov->link != dev->devfn) | 
|  | sysfs_remove_link(&dev->dev.kobj, "dep_link"); | 
|  |  | 
|  | pci_iov_set_numvfs(dev, 0); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void sriov_del_vfs(struct pci_dev *dev) | 
|  | { | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  | int i; | 
|  |  | 
|  | if (dev->no_vf_scan) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < iov->num_VFs; i++) | 
|  | pci_iov_remove_virtfn(dev, i); | 
|  | } | 
|  |  | 
|  | static void sriov_disable(struct pci_dev *dev) | 
|  | { | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  |  | 
|  | if (!iov->num_VFs) | 
|  | return; | 
|  |  | 
|  | sriov_del_vfs(dev); | 
|  | iov->ctrl &= ~(PCI_SRIOV_CTRL_VFE | PCI_SRIOV_CTRL_MSE); | 
|  | pci_cfg_access_lock(dev); | 
|  | pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | 
|  | ssleep(1); | 
|  | pci_cfg_access_unlock(dev); | 
|  |  | 
|  | pcibios_sriov_disable(dev); | 
|  |  | 
|  | if (iov->link != dev->devfn) | 
|  | sysfs_remove_link(&dev->dev.kobj, "dep_link"); | 
|  |  | 
|  | iov->num_VFs = 0; | 
|  | pci_iov_set_numvfs(dev, 0); | 
|  | } | 
|  |  | 
|  | static int sriov_init(struct pci_dev *dev, int pos) | 
|  | { | 
|  | int i, bar64; | 
|  | int rc; | 
|  | int nres; | 
|  | u32 pgsz; | 
|  | u16 ctrl, total; | 
|  | struct pci_sriov *iov; | 
|  | struct resource *res; | 
|  | struct pci_dev *pdev; | 
|  |  | 
|  | pci_read_config_word(dev, pos + PCI_SRIOV_CTRL, &ctrl); | 
|  | if (ctrl & PCI_SRIOV_CTRL_VFE) { | 
|  | pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, 0); | 
|  | ssleep(1); | 
|  | } | 
|  |  | 
|  | ctrl = 0; | 
|  | list_for_each_entry(pdev, &dev->bus->devices, bus_list) | 
|  | if (pdev->is_physfn) | 
|  | goto found; | 
|  |  | 
|  | pdev = NULL; | 
|  | if (pci_ari_enabled(dev->bus)) | 
|  | ctrl |= PCI_SRIOV_CTRL_ARI; | 
|  |  | 
|  | found: | 
|  | pci_write_config_word(dev, pos + PCI_SRIOV_CTRL, ctrl); | 
|  |  | 
|  | pci_read_config_word(dev, pos + PCI_SRIOV_TOTAL_VF, &total); | 
|  | if (!total) | 
|  | return 0; | 
|  |  | 
|  | pci_read_config_dword(dev, pos + PCI_SRIOV_SUP_PGSIZE, &pgsz); | 
|  | i = PAGE_SHIFT > 12 ? PAGE_SHIFT - 12 : 0; | 
|  | pgsz &= ~((1 << i) - 1); | 
|  | if (!pgsz) | 
|  | return -EIO; | 
|  |  | 
|  | pgsz &= ~(pgsz - 1); | 
|  | pci_write_config_dword(dev, pos + PCI_SRIOV_SYS_PGSIZE, pgsz); | 
|  |  | 
|  | iov = kzalloc(sizeof(*iov), GFP_KERNEL); | 
|  | if (!iov) | 
|  | return -ENOMEM; | 
|  |  | 
|  | nres = 0; | 
|  | for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | 
|  | res = &dev->resource[i + PCI_IOV_RESOURCES]; | 
|  | /* | 
|  | * If it is already FIXED, don't change it, something | 
|  | * (perhaps EA or header fixups) wants it this way. | 
|  | */ | 
|  | if (res->flags & IORESOURCE_PCI_FIXED) | 
|  | bar64 = (res->flags & IORESOURCE_MEM_64) ? 1 : 0; | 
|  | else | 
|  | bar64 = __pci_read_base(dev, pci_bar_unknown, res, | 
|  | pos + PCI_SRIOV_BAR + i * 4); | 
|  | if (!res->flags) | 
|  | continue; | 
|  | if (resource_size(res) & (PAGE_SIZE - 1)) { | 
|  | rc = -EIO; | 
|  | goto failed; | 
|  | } | 
|  | iov->barsz[i] = resource_size(res); | 
|  | res->end = res->start + resource_size(res) * total - 1; | 
|  | pci_info(dev, "VF(n) BAR%d space: %pR (contains BAR%d for %d VFs)\n", | 
|  | i, res, i, total); | 
|  | i += bar64; | 
|  | nres++; | 
|  | } | 
|  |  | 
|  | iov->pos = pos; | 
|  | iov->nres = nres; | 
|  | iov->ctrl = ctrl; | 
|  | iov->total_VFs = total; | 
|  | iov->driver_max_VFs = total; | 
|  | pci_read_config_word(dev, pos + PCI_SRIOV_VF_DID, &iov->vf_device); | 
|  | iov->pgsz = pgsz; | 
|  | iov->self = dev; | 
|  | iov->drivers_autoprobe = true; | 
|  | pci_read_config_dword(dev, pos + PCI_SRIOV_CAP, &iov->cap); | 
|  | pci_read_config_byte(dev, pos + PCI_SRIOV_FUNC_LINK, &iov->link); | 
|  | if (pci_pcie_type(dev) == PCI_EXP_TYPE_RC_END) | 
|  | iov->link = PCI_DEVFN(PCI_SLOT(dev->devfn), iov->link); | 
|  |  | 
|  | if (pdev) | 
|  | iov->dev = pci_dev_get(pdev); | 
|  | else | 
|  | iov->dev = dev; | 
|  |  | 
|  | dev->sriov = iov; | 
|  | dev->is_physfn = 1; | 
|  | rc = compute_max_vf_buses(dev); | 
|  | if (rc) | 
|  | goto fail_max_buses; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | fail_max_buses: | 
|  | dev->sriov = NULL; | 
|  | dev->is_physfn = 0; | 
|  | failed: | 
|  | for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { | 
|  | res = &dev->resource[i + PCI_IOV_RESOURCES]; | 
|  | res->flags = 0; | 
|  | } | 
|  |  | 
|  | kfree(iov); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static void sriov_release(struct pci_dev *dev) | 
|  | { | 
|  | BUG_ON(dev->sriov->num_VFs); | 
|  |  | 
|  | if (dev != dev->sriov->dev) | 
|  | pci_dev_put(dev->sriov->dev); | 
|  |  | 
|  | kfree(dev->sriov); | 
|  | dev->sriov = NULL; | 
|  | } | 
|  |  | 
|  | static void sriov_restore_state(struct pci_dev *dev) | 
|  | { | 
|  | int i; | 
|  | u16 ctrl; | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  |  | 
|  | pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &ctrl); | 
|  | if (ctrl & PCI_SRIOV_CTRL_VFE) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * Restore PCI_SRIOV_CTRL_ARI before pci_iov_set_numvfs() because | 
|  | * it reads offset & stride, which depend on PCI_SRIOV_CTRL_ARI. | 
|  | */ | 
|  | ctrl &= ~PCI_SRIOV_CTRL_ARI; | 
|  | ctrl |= iov->ctrl & PCI_SRIOV_CTRL_ARI; | 
|  | pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, ctrl); | 
|  |  | 
|  | for (i = PCI_IOV_RESOURCES; i <= PCI_IOV_RESOURCE_END; i++) | 
|  | pci_update_resource(dev, i); | 
|  |  | 
|  | pci_write_config_dword(dev, iov->pos + PCI_SRIOV_SYS_PGSIZE, iov->pgsz); | 
|  | pci_iov_set_numvfs(dev, iov->num_VFs); | 
|  | pci_write_config_word(dev, iov->pos + PCI_SRIOV_CTRL, iov->ctrl); | 
|  | if (iov->ctrl & PCI_SRIOV_CTRL_VFE) | 
|  | msleep(100); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_iov_init - initialize the IOV capability | 
|  | * @dev: the PCI device | 
|  | * | 
|  | * Returns 0 on success, or negative on failure. | 
|  | */ | 
|  | int pci_iov_init(struct pci_dev *dev) | 
|  | { | 
|  | int pos; | 
|  |  | 
|  | if (!pci_is_pcie(dev)) | 
|  | return -ENODEV; | 
|  |  | 
|  | pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV); | 
|  | if (pos) | 
|  | return sriov_init(dev, pos); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_iov_release - release resources used by the IOV capability | 
|  | * @dev: the PCI device | 
|  | */ | 
|  | void pci_iov_release(struct pci_dev *dev) | 
|  | { | 
|  | if (dev->is_physfn) | 
|  | sriov_release(dev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_iov_remove - clean up SR-IOV state after PF driver is detached | 
|  | * @dev: the PCI device | 
|  | */ | 
|  | void pci_iov_remove(struct pci_dev *dev) | 
|  | { | 
|  | struct pci_sriov *iov = dev->sriov; | 
|  |  | 
|  | if (!dev->is_physfn) | 
|  | return; | 
|  |  | 
|  | iov->driver_max_VFs = iov->total_VFs; | 
|  | if (iov->num_VFs) | 
|  | pci_warn(dev, "driver left SR-IOV enabled after remove\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_iov_update_resource - update a VF BAR | 
|  | * @dev: the PCI device | 
|  | * @resno: the resource number | 
|  | * | 
|  | * Update a VF BAR in the SR-IOV capability of a PF. | 
|  | */ | 
|  | void pci_iov_update_resource(struct pci_dev *dev, int resno) | 
|  | { | 
|  | struct pci_sriov *iov = dev->is_physfn ? dev->sriov : NULL; | 
|  | struct resource *res = dev->resource + resno; | 
|  | int vf_bar = resno - PCI_IOV_RESOURCES; | 
|  | struct pci_bus_region region; | 
|  | u16 cmd; | 
|  | u32 new; | 
|  | int reg; | 
|  |  | 
|  | /* | 
|  | * The generic pci_restore_bars() path calls this for all devices, | 
|  | * including VFs and non-SR-IOV devices.  If this is not a PF, we | 
|  | * have nothing to do. | 
|  | */ | 
|  | if (!iov) | 
|  | return; | 
|  |  | 
|  | pci_read_config_word(dev, iov->pos + PCI_SRIOV_CTRL, &cmd); | 
|  | if ((cmd & PCI_SRIOV_CTRL_VFE) && (cmd & PCI_SRIOV_CTRL_MSE)) { | 
|  | dev_WARN(&dev->dev, "can't update enabled VF BAR%d %pR\n", | 
|  | vf_bar, res); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Ignore unimplemented BARs, unused resource slots for 64-bit | 
|  | * BARs, and non-movable resources, e.g., those described via | 
|  | * Enhanced Allocation. | 
|  | */ | 
|  | if (!res->flags) | 
|  | return; | 
|  |  | 
|  | if (res->flags & IORESOURCE_UNSET) | 
|  | return; | 
|  |  | 
|  | if (res->flags & IORESOURCE_PCI_FIXED) | 
|  | return; | 
|  |  | 
|  | pcibios_resource_to_bus(dev->bus, ®ion, res); | 
|  | new = region.start; | 
|  | new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK; | 
|  |  | 
|  | reg = iov->pos + PCI_SRIOV_BAR + 4 * vf_bar; | 
|  | pci_write_config_dword(dev, reg, new); | 
|  | if (res->flags & IORESOURCE_MEM_64) { | 
|  | new = region.start >> 16 >> 16; | 
|  | pci_write_config_dword(dev, reg + 4, new); | 
|  | } | 
|  | } | 
|  |  | 
|  | resource_size_t __weak pcibios_iov_resource_alignment(struct pci_dev *dev, | 
|  | int resno) | 
|  | { | 
|  | return pci_iov_resource_size(dev, resno); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_sriov_resource_alignment - get resource alignment for VF BAR | 
|  | * @dev: the PCI device | 
|  | * @resno: the resource number | 
|  | * | 
|  | * Returns the alignment of the VF BAR found in the SR-IOV capability. | 
|  | * This is not the same as the resource size which is defined as | 
|  | * the VF BAR size multiplied by the number of VFs.  The alignment | 
|  | * is just the VF BAR size. | 
|  | */ | 
|  | resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno) | 
|  | { | 
|  | return pcibios_iov_resource_alignment(dev, resno); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_restore_iov_state - restore the state of the IOV capability | 
|  | * @dev: the PCI device | 
|  | */ | 
|  | void pci_restore_iov_state(struct pci_dev *dev) | 
|  | { | 
|  | if (dev->is_physfn) | 
|  | sriov_restore_state(dev); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_vf_drivers_autoprobe - set PF property drivers_autoprobe for VFs | 
|  | * @dev: the PCI device | 
|  | * @auto_probe: set VF drivers auto probe flag | 
|  | */ | 
|  | void pci_vf_drivers_autoprobe(struct pci_dev *dev, bool auto_probe) | 
|  | { | 
|  | if (dev->is_physfn) | 
|  | dev->sriov->drivers_autoprobe = auto_probe; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_iov_bus_range - find bus range used by Virtual Function | 
|  | * @bus: the PCI bus | 
|  | * | 
|  | * Returns max number of buses (exclude current one) used by Virtual | 
|  | * Functions. | 
|  | */ | 
|  | int pci_iov_bus_range(struct pci_bus *bus) | 
|  | { | 
|  | int max = 0; | 
|  | struct pci_dev *dev; | 
|  |  | 
|  | list_for_each_entry(dev, &bus->devices, bus_list) { | 
|  | if (!dev->is_physfn) | 
|  | continue; | 
|  | if (dev->sriov->max_VF_buses > max) | 
|  | max = dev->sriov->max_VF_buses; | 
|  | } | 
|  |  | 
|  | return max ? max - bus->number : 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_enable_sriov - enable the SR-IOV capability | 
|  | * @dev: the PCI device | 
|  | * @nr_virtfn: number of virtual functions to enable | 
|  | * | 
|  | * Returns 0 on success, or negative on failure. | 
|  | */ | 
|  | int pci_enable_sriov(struct pci_dev *dev, int nr_virtfn) | 
|  | { | 
|  | might_sleep(); | 
|  |  | 
|  | if (!dev->is_physfn) | 
|  | return -ENOSYS; | 
|  |  | 
|  | return sriov_enable(dev, nr_virtfn); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_enable_sriov); | 
|  |  | 
|  | /** | 
|  | * pci_disable_sriov - disable the SR-IOV capability | 
|  | * @dev: the PCI device | 
|  | */ | 
|  | void pci_disable_sriov(struct pci_dev *dev) | 
|  | { | 
|  | might_sleep(); | 
|  |  | 
|  | if (!dev->is_physfn) | 
|  | return; | 
|  |  | 
|  | sriov_disable(dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_disable_sriov); | 
|  |  | 
|  | /** | 
|  | * pci_num_vf - return number of VFs associated with a PF device_release_driver | 
|  | * @dev: the PCI device | 
|  | * | 
|  | * Returns number of VFs, or 0 if SR-IOV is not enabled. | 
|  | */ | 
|  | int pci_num_vf(struct pci_dev *dev) | 
|  | { | 
|  | if (!dev->is_physfn) | 
|  | return 0; | 
|  |  | 
|  | return dev->sriov->num_VFs; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_num_vf); | 
|  |  | 
|  | /** | 
|  | * pci_vfs_assigned - returns number of VFs are assigned to a guest | 
|  | * @dev: the PCI device | 
|  | * | 
|  | * Returns number of VFs belonging to this device that are assigned to a guest. | 
|  | * If device is not a physical function returns 0. | 
|  | */ | 
|  | int pci_vfs_assigned(struct pci_dev *dev) | 
|  | { | 
|  | struct pci_dev *vfdev; | 
|  | unsigned int vfs_assigned = 0; | 
|  | unsigned short dev_id; | 
|  |  | 
|  | /* only search if we are a PF */ | 
|  | if (!dev->is_physfn) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * determine the device ID for the VFs, the vendor ID will be the | 
|  | * same as the PF so there is no need to check for that one | 
|  | */ | 
|  | dev_id = dev->sriov->vf_device; | 
|  |  | 
|  | /* loop through all the VFs to see if we own any that are assigned */ | 
|  | vfdev = pci_get_device(dev->vendor, dev_id, NULL); | 
|  | while (vfdev) { | 
|  | /* | 
|  | * It is considered assigned if it is a virtual function with | 
|  | * our dev as the physical function and the assigned bit is set | 
|  | */ | 
|  | if (vfdev->is_virtfn && (vfdev->physfn == dev) && | 
|  | pci_is_dev_assigned(vfdev)) | 
|  | vfs_assigned++; | 
|  |  | 
|  | vfdev = pci_get_device(dev->vendor, dev_id, vfdev); | 
|  | } | 
|  |  | 
|  | return vfs_assigned; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_vfs_assigned); | 
|  |  | 
|  | /** | 
|  | * pci_sriov_set_totalvfs -- reduce the TotalVFs available | 
|  | * @dev: the PCI PF device | 
|  | * @numvfs: number that should be used for TotalVFs supported | 
|  | * | 
|  | * Should be called from PF driver's probe routine with | 
|  | * device's mutex held. | 
|  | * | 
|  | * Returns 0 if PF is an SRIOV-capable device and | 
|  | * value of numvfs valid. If not a PF return -ENOSYS; | 
|  | * if numvfs is invalid return -EINVAL; | 
|  | * if VFs already enabled, return -EBUSY. | 
|  | */ | 
|  | int pci_sriov_set_totalvfs(struct pci_dev *dev, u16 numvfs) | 
|  | { | 
|  | if (!dev->is_physfn) | 
|  | return -ENOSYS; | 
|  |  | 
|  | if (numvfs > dev->sriov->total_VFs) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Shouldn't change if VFs already enabled */ | 
|  | if (dev->sriov->ctrl & PCI_SRIOV_CTRL_VFE) | 
|  | return -EBUSY; | 
|  |  | 
|  | dev->sriov->driver_max_VFs = numvfs; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_sriov_set_totalvfs); | 
|  |  | 
|  | /** | 
|  | * pci_sriov_get_totalvfs -- get total VFs supported on this device | 
|  | * @dev: the PCI PF device | 
|  | * | 
|  | * For a PCIe device with SRIOV support, return the PCIe | 
|  | * SRIOV capability value of TotalVFs or the value of driver_max_VFs | 
|  | * if the driver reduced it.  Otherwise 0. | 
|  | */ | 
|  | int pci_sriov_get_totalvfs(struct pci_dev *dev) | 
|  | { | 
|  | if (!dev->is_physfn) | 
|  | return 0; | 
|  |  | 
|  | return dev->sriov->driver_max_VFs; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_sriov_get_totalvfs); | 
|  |  | 
|  | /** | 
|  | * pci_sriov_configure_simple - helper to configure SR-IOV | 
|  | * @dev: the PCI device | 
|  | * @nr_virtfn: number of virtual functions to enable, 0 to disable | 
|  | * | 
|  | * Enable or disable SR-IOV for devices that don't require any PF setup | 
|  | * before enabling SR-IOV.  Return value is negative on error, or number of | 
|  | * VFs allocated on success. | 
|  | */ | 
|  | int pci_sriov_configure_simple(struct pci_dev *dev, int nr_virtfn) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | might_sleep(); | 
|  |  | 
|  | if (!dev->is_physfn) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (pci_vfs_assigned(dev)) { | 
|  | pci_warn(dev, "Cannot modify SR-IOV while VFs are assigned\n"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (nr_virtfn == 0) { | 
|  | sriov_disable(dev); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | rc = sriov_enable(dev, nr_virtfn); | 
|  | if (rc < 0) | 
|  | return rc; | 
|  |  | 
|  | return nr_virtfn; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_sriov_configure_simple); |