blob: 54aefab71f2cb1b3c4e276ff905a4fed8d8ab568 [file] [log] [blame]
* Rockchip I2S controller
The I2S bus (Inter-IC sound bus) is a serial link for digital
audio data transfer between devices in the system.
Required properties:
- compatible: should be one of the following:
- "rockchip,rk3066-i2s": for rk3066
- "rockchip,px30-i2s", "rockchip,rk3066-i2s": for px30
- "rockchip,rk3036-i2s", "rockchip,rk3066-i2s": for rk3036
- "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188
- "rockchip,rk3228-i2s", "rockchip,rk3066-i2s": for rk3228
- "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288
- "rockchip,rk3328-i2s", "rockchip,rk3066-i2s": for rk3328
- "rockchip,rk3366-i2s", "rockchip,rk3066-i2s": for rk3366
- "rockchip,rk3368-i2s", "rockchip,rk3066-i2s": for rk3368
- "rockchip,rk3399-i2s", "rockchip,rk3066-i2s": for rk3399
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: should contain the I2S interrupt.
- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should include "tx" and "rx".
- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names.
- clock-names: should contain the following:
- "i2s_hclk": clock for I2S BUS
- "i2s_clk" : clock for I2S controller
- rockchip,playback-channels: max playback channels, if not set, 8 channels default.
- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
Required properties for controller which support multi channels
playback/capture:
- rockchip,grf: the phandle of the syscon node for GRF register.
Example for rk3288 I2S controller:
i2s@ff890000 {
compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
reg = <0xff890000 0x10000>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 0>, <&pdma1 1>;
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
rockchip,playback-channels = <8>;
rockchip,capture-channels = <2>;
};