Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
IB/ipath: deref correct pointer when using kernel SMA
IB/ipath: fix null deref during rdma ops
IB/ipath: register as IB device owner
IB/ipath: enable PE800 receive interrupts on user ports
IB/ipath: enable GPIO interrupt on HT-460
IB/ipath: fix NULL dereference during cleanup
IB/ipath: replace uses of LIST_POISON
IB/ipath: fix reporting of driver version to userspace
IB/ipath: don't modify QP if changes fail
IB/ipath: fix spinlock recursion bug
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig
index 3f0ec6b..a97c8f5 100644
--- a/drivers/media/dvb/Kconfig
+++ b/drivers/media/dvb/Kconfig
@@ -22,26 +22,26 @@
source "drivers/media/dvb/dvb-core/Kconfig"
comment "Supported SAA7146 based PCI Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/ttpci/Kconfig"
comment "Supported USB Adapters"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && I2C
source "drivers/media/dvb/dvb-usb/Kconfig"
source "drivers/media/dvb/ttusb-budget/Kconfig"
source "drivers/media/dvb/ttusb-dec/Kconfig"
source "drivers/media/dvb/cinergyT2/Kconfig"
comment "Supported FlexCopII (B2C2) Adapters"
- depends on DVB_CORE && (PCI || USB)
+ depends on DVB_CORE && (PCI || USB) && I2C
source "drivers/media/dvb/b2c2/Kconfig"
comment "Supported BT878 Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/bt8xx/Kconfig"
comment "Supported Pluto2 Adapters"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
source "drivers/media/dvb/pluto2/Kconfig"
comment "Supported DVB Frontends"
diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig
index 2963605..d7f1fd5 100644
--- a/drivers/media/dvb/b2c2/Kconfig
+++ b/drivers/media/dvb/b2c2/Kconfig
@@ -1,6 +1,6 @@
config DVB_B2C2_FLEXCOP
tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
- depends on DVB_CORE
+ depends on DVB_CORE && I2C
select DVB_STV0299
select DVB_MT352
select DVB_MT312
@@ -16,7 +16,7 @@
config DVB_B2C2_FLEXCOP_PCI
tristate "Technisat/B2C2 Air/Sky/Cable2PC PCI"
- depends on DVB_B2C2_FLEXCOP && PCI
+ depends on DVB_B2C2_FLEXCOP && PCI && I2C
help
Support for the Air/Sky/CableStar2 PCI card (DVB/ATSC) by Technisat/B2C2.
@@ -24,7 +24,7 @@
config DVB_B2C2_FLEXCOP_USB
tristate "Technisat/B2C2 Air/Sky/Cable2PC USB"
- depends on DVB_B2C2_FLEXCOP && USB
+ depends on DVB_B2C2_FLEXCOP && USB && I2C
help
Support for the Air/Sky/Cable2PC USB1.1 box (DVB/ATSC) by Technisat/B2C2,
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index f28d721..f394002 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,6 +1,6 @@
config DVB_BT8XX
tristate "BT8xx based PCI cards"
- depends on DVB_CORE && PCI && VIDEO_BT848
+ depends on DVB_CORE && PCI && I2C && VIDEO_BT848
select DVB_MT352
select DVB_SP887X
select DVB_NXT6000
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index baa8227..ccc7b2e 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -115,7 +115,7 @@
return 0;
}
-static struct bt878 __init *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
+static struct bt878 __devinit *dvb_bt8xx_878_match(unsigned int bttv_nr, struct pci_dev* bttv_pci_dev)
{
unsigned int card_nr;
@@ -709,7 +709,7 @@
}
}
-static int __init dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
+static int __devinit dvb_bt8xx_load_card(struct dvb_bt8xx_card *card, u32 type)
{
int result;
@@ -794,7 +794,7 @@
return 0;
}
-static int dvb_bt8xx_probe(struct bttv_sub_device *sub)
+static int __devinit dvb_bt8xx_probe(struct bttv_sub_device *sub)
{
struct dvb_bt8xx_card *card;
struct pci_dev* bttv_pci_dev;
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index d3df120..e388fb1 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,6 @@
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && I2C
select FW_LOADER
help
By enabling this you will be able to choose the various supported
diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig
index 84f8f9f..48252e9 100644
--- a/drivers/media/dvb/pluto2/Kconfig
+++ b/drivers/media/dvb/pluto2/Kconfig
@@ -1,6 +1,6 @@
config DVB_PLUTO2
tristate "Pluto2 cards"
- depends on DVB_CORE && PCI
+ depends on DVB_CORE && PCI && I2C
select I2C
select I2C_ALGOBIT
select DVB_TDA1004X
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index c26e232..b5ac7df 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -1,6 +1,6 @@
config DVB_AV7110
tristate "AV7110 cards"
- depends on DVB_CORE && PCI && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select FW_LOADER
select VIDEO_SAA7146_VV
select DVB_VES1820
@@ -58,7 +58,7 @@
config DVB_BUDGET
tristate "Budget cards"
- depends on DVB_CORE && PCI && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0299
select DVB_VES1X93
@@ -79,7 +79,7 @@
config DVB_BUDGET_CI
tristate "Budget cards with onboard CI connector"
- depends on DVB_CORE && PCI && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146
select DVB_STV0297
select DVB_STV0299
@@ -99,7 +99,7 @@
config DVB_BUDGET_AV
tristate "Budget cards with analog video inputs"
- depends on DVB_CORE && PCI && VIDEO_V4L1
+ depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
select VIDEO_SAA7146_VV
select DVB_STV0299
select DVB_TDA1004X
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 7124e53..6b41970 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -170,7 +170,7 @@
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && VIDEO_V4L1
+ depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && !PPC64
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
@@ -178,7 +178,7 @@
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
- depends on PCI && I2C_ALGOBIT && VIDEO_V4L1
+ depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && !PPC64
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index 9debef9..e5bf268 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -11,7 +11,10 @@
msp3400-objs := msp3400-driver.o msp3400-kthreads.o
obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o compat_ioctl32.o
-obj-$(CONFIG_VIDEO_V4L1_COMPAT) += v4l1-compat.o
+
+ifeq ($(CONFIG_VIDEO_V4L1_COMPAT),y)
+ obj-$(CONFIG_VIDEO_DEV) += v4l1-compat.o
+endif
obj-$(CONFIG_VIDEO_BT848) += bt8xx/
obj-$(CONFIG_VIDEO_BT848) += tvaudio.o tda7432.o tda9875.o ir-kbd-i2c.o
diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c
index e39cc05..587458b 100644
--- a/drivers/mmc/mmc_block.c
+++ b/drivers/mmc/mmc_block.c
@@ -353,7 +353,7 @@
*/
printk(KERN_ERR "%s: unable to select block size for "
"writing (rb%u wb%u rp%u wp%u)\n",
- md->disk->disk_name,
+ mmc_card_id(card),
1 << card->csd.read_blkbits,
1 << card->csd.write_blkbits,
card->csd.read_partial,
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 60779eb..9591096 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -979,6 +979,7 @@
struct sky2_hw *hw = sky2->hw;
unsigned rxq = rxqaddr[sky2->port];
int i;
+ unsigned thresh;
sky2->rx_put = sky2->rx_next = 0;
sky2_qset(hw, rxq);
@@ -1003,9 +1004,21 @@
sky2_rx_add(sky2, re->mapaddr);
}
- /* Truncate oversize frames */
- sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), sky2->rx_bufsize - 8);
- sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+
+ /*
+ * The receiver hangs if it receives frames larger than the
+ * packet buffer. As a workaround, truncate oversize frames, but
+ * the register is limited to 9 bits, so if you do frames > 2052
+ * you better get the MTU right!
+ */
+ thresh = (sky2->rx_bufsize - 8) / sizeof(u32);
+ if (thresh > 0x1ff)
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF);
+ else {
+ sky2_write16(hw, SK_REG(sky2->port, RX_GMF_TR_THR), thresh);
+ sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+ }
+
/* Tell chip about available buffers */
sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 823dfa7..fa476e7 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -3643,6 +3643,8 @@
ata_pio_sector(qc);
}
+
+ ata_altstatus(ap); /* flush */
}
static void ata_pio_error(struct ata_port *ap)
@@ -3759,11 +3761,14 @@
spin_lock_irqsave(&ap->host_set->lock, flags);
ap->flags &= ~ATA_FLAG_NOINTR;
ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+ ata_altstatus(ap); /* flush */
+
if (qc->tf.protocol == ATA_PROT_ATAPI_DMA)
ap->ops->bmdma_start(qc); /* initiate bmdma */
spin_unlock_irqrestore(&ap->host_set->lock, flags);
} else {
ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1);
+ ata_altstatus(ap); /* flush */
/* PIO commands are handled by polling */
ap->hsm_task_state = HSM_ST;
diff --git a/fs/jfs/jfs_metapage.c b/fs/jfs/jfs_metapage.c
index f28696f..2b220dd 100644
--- a/fs/jfs/jfs_metapage.c
+++ b/fs/jfs/jfs_metapage.c
@@ -542,7 +542,7 @@
static int metapage_releasepage(struct page *page, gfp_t gfp_mask)
{
struct metapage *mp;
- int busy = 0;
+ int ret = 1;
unsigned int offset;
for (offset = 0; offset < PAGE_CACHE_SIZE; offset += PSIZE) {
@@ -552,30 +552,20 @@
continue;
jfs_info("metapage_releasepage: mp = 0x%p", mp);
- if (mp->count || mp->nohomeok) {
+ if (mp->count || mp->nohomeok ||
+ test_bit(META_dirty, &mp->flag)) {
jfs_info("count = %ld, nohomeok = %d", mp->count,
mp->nohomeok);
- busy = 1;
+ ret = 0;
continue;
}
- wait_on_page_writeback(page);
- //WARN_ON(test_bit(META_dirty, &mp->flag));
- if (test_bit(META_dirty, &mp->flag)) {
- dump_mem("dirty mp in metapage_releasepage", mp,
- sizeof(struct metapage));
- dump_mem("page", page, sizeof(struct page));
- dump_stack();
- }
if (mp->lsn)
remove_from_logsync(mp);
remove_metapage(page, mp);
INCREMENT(mpStat.pagefree);
free_metapage(mp);
}
- if (busy)
- return -1;
-
- return 0;
+ return ret;
}
static void metapage_invalidatepage(struct page *page, unsigned long offset)
diff --git a/net/bridge/br.c b/net/bridge/br.c
index 22d806c..12da21a 100644
--- a/net/bridge/br.c
+++ b/net/bridge/br.c
@@ -55,7 +55,7 @@
static void __exit br_deinit(void)
{
- llc_sap_close(br_stp_sap);
+ rcu_assign_pointer(br_stp_sap->rcv_func, NULL);
#ifdef CONFIG_BRIDGE_NETFILTER
br_netfilter_fini();
@@ -67,6 +67,7 @@
synchronize_net();
+ llc_sap_put(br_stp_sap);
br_fdb_get_hook = NULL;
br_fdb_put_hook = NULL;
diff --git a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
index 355a53a..26dfeca 100644
--- a/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
+++ b/net/ipv4/netfilter/ip_conntrack_helper_h323_asn1.c
@@ -528,14 +528,15 @@
/* Decode */
if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
} else if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)))
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
}
@@ -554,7 +555,7 @@
/* Decode the extension components */
for (opt = 0; opt < bmp2_len; opt++, i++, son++) {
- if (son->attr & STOP) {
+ if (i < f->ub && son->attr & STOP) {
PRINT("%*.s%s\n", (level + 1) * TAB_SIZE, " ",
son->name);
return H323_ERROR_STOP;
@@ -584,8 +585,8 @@
beg = bs->cur;
if ((err = (Decoders[son->type]) (bs, son, base,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
@@ -660,18 +661,20 @@
i <
effective_count ?
base : NULL,
- level + 1)) >
- H323_ERROR_STOP)
+ level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
} else
- if ((err = (Decoders[son->type]) (bs, son,
- i < effective_count ?
- base : NULL,
- level + 1)))
- return err;
+ if ((err = (Decoders[son->type]) (bs, son,
+ i <
+ effective_count ?
+ base : NULL,
+ level + 1)) <
+ H323_ERROR_NONE)
+ return err;
if (base)
base += son->offset;
@@ -735,13 +738,14 @@
}
beg = bs->cur;
- if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) >
- H323_ERROR_STOP)
+ if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+ H323_ERROR_NONE)
return err;
bs->cur = beg + len;
bs->bit = 0;
- } else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)))
+ } else if ((err = (Decoders[son->type]) (bs, son, base, level + 1)) <
+ H323_ERROR_NONE)
return err;
return H323_ERROR_NONE;
diff --git a/net/ipv4/netfilter/ip_nat_snmp_basic.c b/net/ipv4/netfilter/ip_nat_snmp_basic.c
index 688a2f2..c332442 100644
--- a/net/ipv4/netfilter/ip_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/ip_nat_snmp_basic.c
@@ -768,6 +768,7 @@
len *= sizeof(unsigned long);
*obj = kmalloc(sizeof(struct snmp_object) + len, GFP_ATOMIC);
if (*obj == NULL) {
+ kfree(lp);
kfree(id);
if (net_ratelimit())
printk("OOM in bsalg (%d)\n", __LINE__);
