blob: adf91a6e4d7dc9c7caaa6f7021754d2c416eeaf9 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
* Copyright (c) 2014,2015, Linaro Ltd.
*
* SAW power controller driver
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/qcom_scm.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include "dt_idle_states.h"
#define MAX_PMIC_DATA 2
#define MAX_SEQ_DATA 64
#define SPM_CTL_INDEX 0x7f
#define SPM_CTL_INDEX_SHIFT 4
#define SPM_CTL_EN BIT(0)
enum pm_sleep_mode {
PM_SLEEP_MODE_STBY,
PM_SLEEP_MODE_RET,
PM_SLEEP_MODE_SPC,
PM_SLEEP_MODE_PC,
PM_SLEEP_MODE_NR,
};
enum spm_reg {
SPM_REG_CFG,
SPM_REG_SPM_CTL,
SPM_REG_DLY,
SPM_REG_PMIC_DLY,
SPM_REG_PMIC_DATA_0,
SPM_REG_PMIC_DATA_1,
SPM_REG_VCTL,
SPM_REG_SEQ_ENTRY,
SPM_REG_SPM_STS,
SPM_REG_PMIC_STS,
SPM_REG_NR,
};
struct spm_reg_data {
const u8 *reg_offset;
u32 spm_cfg;
u32 spm_dly;
u32 pmic_dly;
u32 pmic_data[MAX_PMIC_DATA];
u8 seq[MAX_SEQ_DATA];
u8 start_index[PM_SLEEP_MODE_NR];
};
struct spm_driver_data {
struct cpuidle_driver cpuidle_driver;
void __iomem *reg_base;
const struct spm_reg_data *reg_data;
};
static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
[SPM_REG_CFG] = 0x08,
[SPM_REG_SPM_CTL] = 0x30,
[SPM_REG_DLY] = 0x34,
[SPM_REG_SEQ_ENTRY] = 0x80,
};
/* SPM register data for 8974, 8084 */
static const struct spm_reg_data spm_reg_8974_8084_cpu = {
.reg_offset = spm_reg_offset_v2_1,
.spm_cfg = 0x1,
.spm_dly = 0x3C102800,
.seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
0x0F },
.start_index[PM_SLEEP_MODE_STBY] = 0,
.start_index[PM_SLEEP_MODE_SPC] = 3,
};
static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
[SPM_REG_CFG] = 0x08,
[SPM_REG_SPM_CTL] = 0x20,
[SPM_REG_PMIC_DLY] = 0x24,
[SPM_REG_PMIC_DATA_0] = 0x28,
[SPM_REG_PMIC_DATA_1] = 0x2C,
[SPM_REG_SEQ_ENTRY] = 0x80,
};
/* SPM register data for 8064 */
static const struct spm_reg_data spm_reg_8064_cpu = {
.reg_offset = spm_reg_offset_v1_1,
.spm_cfg = 0x1F,
.pmic_dly = 0x02020004,
.pmic_data[0] = 0x0084009C,
.pmic_data[1] = 0x00A4001C,
.seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
.start_index[PM_SLEEP_MODE_STBY] = 0,
.start_index[PM_SLEEP_MODE_SPC] = 2,
};
static inline void spm_register_write(struct spm_driver_data *drv,
enum spm_reg reg, u32 val)
{
if (drv->reg_data->reg_offset[reg])
writel_relaxed(val, drv->reg_base +
drv->reg_data->reg_offset[reg]);
}
/* Ensure a guaranteed write, before return */
static inline void spm_register_write_sync(struct spm_driver_data *drv,
enum spm_reg reg, u32 val)
{
u32 ret;
if (!drv->reg_data->reg_offset[reg])
return;
do {
writel_relaxed(val, drv->reg_base +
drv->reg_data->reg_offset[reg]);
ret = readl_relaxed(drv->reg_base +
drv->reg_data->reg_offset[reg]);
if (ret == val)
break;
cpu_relax();
} while (1);
}
static inline u32 spm_register_read(struct spm_driver_data *drv,
enum spm_reg reg)
{
return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
}
static void spm_set_low_power_mode(struct spm_driver_data *drv,
enum pm_sleep_mode mode)
{
u32 start_index;
u32 ctl_val;
start_index = drv->reg_data->start_index[mode];
ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
ctl_val |= SPM_CTL_EN;
spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
}
static int qcom_pm_collapse(unsigned long int unused)
{
qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON);
/*
* Returns here only if there was a pending interrupt and we did not
* power down as a result.
*/
return -1;
}
static int qcom_cpu_spc(struct spm_driver_data *drv)
{
int ret;
spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
ret = cpu_suspend(0, qcom_pm_collapse);
/*
* ARM common code executes WFI without calling into our driver and
* if the SPM mode is not reset, then we may accidently power down the
* cpu when we intended only to gate the cpu clock.
* Ensure the state is set to standby before returning.
*/
spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
return ret;
}
static int spm_enter_idle_state(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int idx)
{
struct spm_driver_data *data = container_of(drv, struct spm_driver_data,
cpuidle_driver);
return CPU_PM_CPU_IDLE_ENTER_PARAM(qcom_cpu_spc, idx, data);
}
static struct cpuidle_driver qcom_spm_idle_driver = {
.name = "qcom_spm",
.owner = THIS_MODULE,
.states[0] = {
.enter = spm_enter_idle_state,
.exit_latency = 1,
.target_residency = 1,
.power_usage = UINT_MAX,
.name = "WFI",
.desc = "ARM WFI",
}
};
static const struct of_device_id qcom_idle_state_match[] = {
{ .compatible = "qcom,idle-state-spc", .data = spm_enter_idle_state },
{ },
};
static int spm_cpuidle_init(struct cpuidle_driver *drv, int cpu)
{
int ret;
memcpy(drv, &qcom_spm_idle_driver, sizeof(*drv));
drv->cpumask = (struct cpumask *)cpumask_of(cpu);
/* Parse idle states from device tree */
ret = dt_init_idle_driver(drv, qcom_idle_state_match, 1);
if (ret <= 0)
return ret ? : -ENODEV;
/* We have atleast one power down mode */
return qcom_scm_set_warm_boot_addr(cpu_resume_arm, drv->cpumask);
}
static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
int *spm_cpu)
{
struct spm_driver_data *drv = NULL;
struct device_node *cpu_node, *saw_node;
int cpu;
bool found = 0;
for_each_possible_cpu(cpu) {
cpu_node = of_cpu_device_node_get(cpu);
if (!cpu_node)
continue;
saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
found = (saw_node == pdev->dev.of_node);
of_node_put(saw_node);
of_node_put(cpu_node);
if (found)
break;
}
if (found) {
drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
if (drv)
*spm_cpu = cpu;
}
return drv;
}
static const struct of_device_id spm_match_table[] = {
{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
.data = &spm_reg_8974_8084_cpu },
{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",
.data = &spm_reg_8974_8084_cpu },
{ .compatible = "qcom,apq8064-saw2-v1.1-cpu",
.data = &spm_reg_8064_cpu },
{ },
};
static int spm_dev_probe(struct platform_device *pdev)
{
struct spm_driver_data *drv;
struct resource *res;
const struct of_device_id *match_id;
void __iomem *addr;
int cpu, ret;
if (!qcom_scm_is_available())
return -EPROBE_DEFER;
drv = spm_get_drv(pdev, &cpu);
if (!drv)
return -EINVAL;
platform_set_drvdata(pdev, drv);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(drv->reg_base))
return PTR_ERR(drv->reg_base);
match_id = of_match_node(spm_match_table, pdev->dev.of_node);
if (!match_id)
return -ENODEV;
drv->reg_data = match_id->data;
ret = spm_cpuidle_init(&drv->cpuidle_driver, cpu);
if (ret)
return ret;
/* Write the SPM sequences first.. */
addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
__iowrite32_copy(addr, drv->reg_data->seq,
ARRAY_SIZE(drv->reg_data->seq) / 4);
/*
* ..and then the control registers.
* On some SoC if the control registers are written first and if the
* CPU was held in reset, the reset signal could trigger the SPM state
* machine, before the sequences are completely written.
*/
spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
spm_register_write(drv, SPM_REG_PMIC_DATA_0,
drv->reg_data->pmic_data[0]);
spm_register_write(drv, SPM_REG_PMIC_DATA_1,
drv->reg_data->pmic_data[1]);
/* Set up Standby as the default low power mode */
spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
return cpuidle_register(&drv->cpuidle_driver, NULL);
}
static int spm_dev_remove(struct platform_device *pdev)
{
struct spm_driver_data *drv = platform_get_drvdata(pdev);
cpuidle_unregister(&drv->cpuidle_driver);
return 0;
}
static struct platform_driver spm_driver = {
.probe = spm_dev_probe,
.remove = spm_dev_remove,
.driver = {
.name = "saw",
.of_match_table = spm_match_table,
},
};
builtin_platform_driver(spm_driver);