| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle |
| */ |
| #ifndef __ASM_JAZZ_H |
| #define __ASM_JAZZ_H |
| |
| /* |
| * The addresses below are virtual address. The mappings are |
| * created on startup via wired entries in the tlb. The Mips |
| * Magnum R3000 and R4000 machines are similar in many aspects, |
| * but many hardware register are accessible at 0xb9000000 in |
| * instead of 0xe0000000. |
| */ |
| |
| #define JAZZ_LOCAL_IO_SPACE 0xe0000000 |
| |
| /* |
| * Revision numbers in PICA_ASIC_REVISION |
| * |
| * 0xf0000000 - Rev1 |
| * 0xf0000001 - Rev2 |
| * 0xf0000002 - Rev3 |
| */ |
| #define PICA_ASIC_REVISION 0xe0000008 |
| |
| /* |
| * The segments of the seven segment LED are mapped |
| * to the control bits as follows: |
| * |
| * (7) |
| * --------- |
| * | | |
| * (2) | | (6) |
| * | (1) | |
| * --------- |
| * | | |
| * (3) | | (5) |
| * | (4) | |
| * --------- . (0) |
| */ |
| #define PICA_LED 0xe000f000 |
| |
| /* |
| * Some characters for the LED control registers |
| * The original Mips machines seem to have a LED display |
| * with integrated decoder while the Acer machines can |
| * control each of the seven segments and the dot independently. |
| * It's only a toy, anyway... |
| */ |
| #define LED_DOT 0x01 |
| #define LED_SPACE 0x00 |
| #define LED_0 0xfc |
| #define LED_1 0x60 |
| #define LED_2 0xda |
| #define LED_3 0xf2 |
| #define LED_4 0x66 |
| #define LED_5 0xb6 |
| #define LED_6 0xbe |
| #define LED_7 0xe0 |
| #define LED_8 0xfe |
| #define LED_9 0xf6 |
| #define LED_A 0xee |
| #define LED_b 0x3e |
| #define LED_C 0x9c |
| #define LED_d 0x7a |
| #define LED_E 0x9e |
| #define LED_F 0x8e |
| |
| #ifndef __ASSEMBLY__ |
| |
| static __inline__ void pica_set_led(unsigned int bits) |
| { |
| volatile unsigned int *led_register = (unsigned int *) PICA_LED; |
| |
| *led_register = bits; |
| } |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| /* |
| * Base address of the Sonic Ethernet adapter in Jazz machines. |
| */ |
| #define JAZZ_ETHERNET_BASE 0xe0001000 |
| |
| /* |
| * Base address of the 53C94 SCSI hostadapter in Jazz machines. |
| */ |
| #define JAZZ_SCSI_BASE 0xe0002000 |
| |
| /* |
| * i8042 keyboard controller for JAZZ and PICA chipsets. |
| * This address is just a guess and seems to differ from |
| * other mips machines such as RC3xxx... |
| */ |
| #define JAZZ_KEYBOARD_ADDRESS 0xe0005000 |
| #define JAZZ_KEYBOARD_DATA 0xe0005000 |
| #define JAZZ_KEYBOARD_COMMAND 0xe0005001 |
| |
| #ifndef __ASSEMBLY__ |
| |
| typedef struct { |
| unsigned char data; |
| unsigned char command; |
| } jazz_keyboard_hardware; |
| |
| #define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS) |
| |
| typedef struct { |
| unsigned char pad0[3]; |
| unsigned char data; |
| unsigned char pad1[3]; |
| unsigned char command; |
| } mips_keyboard_hardware; |
| |
| /* |
| * For now. Needs to be changed for RC3xxx support. See below. |
| */ |
| #define keyboard_hardware jazz_keyboard_hardware |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| /* |
| * i8042 keyboard controller for most other Mips machines. |
| */ |
| #define MIPS_KEYBOARD_ADDRESS 0xb9005000 |
| #define MIPS_KEYBOARD_DATA 0xb9005003 |
| #define MIPS_KEYBOARD_COMMAND 0xb9005007 |
| |
| /* |
| * Serial and parallel ports (WD 16C552) on the Mips JAZZ |
| */ |
| #define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 |
| #define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 |
| #define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 |
| |
| /* |
| * Dummy Device Address. Used in jazzdma.c |
| */ |
| #define JAZZ_DUMMY_DEVICE 0xe000d000 |
| |
| /* |
| * JAZZ timer registers and interrupt no. |
| * Note that the hardware timer interrupt is actually on |
| * cpu level 6, but to keep compatibility with PC stuff |
| * it is remapped to vector 0. See arch/mips/kernel/entry.S. |
| */ |
| #define JAZZ_TIMER_INTERVAL 0xe0000228 |
| #define JAZZ_TIMER_REGISTER 0xe0000230 |
| |
| /* |
| * DRAM configuration register |
| */ |
| #ifndef __ASSEMBLY__ |
| #ifdef __MIPSEL__ |
| typedef struct { |
| unsigned int bank2 : 3; |
| unsigned int bank1 : 3; |
| unsigned int mem_bus_width : 1; |
| unsigned int reserved2 : 1; |
| unsigned int page_mode : 1; |
| unsigned int reserved1 : 23; |
| } dram_configuration; |
| #else /* defined (__MIPSEB__) */ |
| typedef struct { |
| unsigned int reserved1 : 23; |
| unsigned int page_mode : 1; |
| unsigned int reserved2 : 1; |
| unsigned int mem_bus_width : 1; |
| unsigned int bank1 : 3; |
| unsigned int bank2 : 3; |
| } dram_configuration; |
| #endif |
| #endif /* !__ASSEMBLY__ */ |
| |
| #define PICA_DRAM_CONFIG 0xe00fffe0 |
| |
| /* |
| * JAZZ interrupt control registers |
| */ |
| #define JAZZ_IO_IRQ_SOURCE 0xe0010000 |
| #define JAZZ_IO_IRQ_ENABLE 0xe0010002 |
| |
| /* |
| * JAZZ interrupt enable bits |
| */ |
| #define JAZZ_IE_PARALLEL (1 << 0) |
| #define JAZZ_IE_FLOPPY (1 << 1) |
| #define JAZZ_IE_SOUND (1 << 2) |
| #define JAZZ_IE_VIDEO (1 << 3) |
| #define JAZZ_IE_ETHERNET (1 << 4) |
| #define JAZZ_IE_SCSI (1 << 5) |
| #define JAZZ_IE_KEYBOARD (1 << 6) |
| #define JAZZ_IE_MOUSE (1 << 7) |
| #define JAZZ_IE_SERIAL1 (1 << 8) |
| #define JAZZ_IE_SERIAL2 (1 << 9) |
| |
| /* |
| * JAZZ Interrupt Level definitions |
| * |
| * This is somewhat broken. For reasons which nobody can remember anymore |
| * we remap the Jazz interrupts to the usual ISA style interrupt numbers. |
| */ |
| #define JAZZ_PARALLEL_IRQ 16 |
| #define JAZZ_FLOPPY_IRQ 17 |
| #define JAZZ_SOUND_IRQ 18 |
| #define JAZZ_VIDEO_IRQ 19 |
| #define JAZZ_ETHERNET_IRQ 20 |
| #define JAZZ_SCSI_IRQ 21 |
| #define JAZZ_KEYBOARD_IRQ 22 |
| #define JAZZ_MOUSE_IRQ 23 |
| #define JAZZ_SERIAL1_IRQ 24 |
| #define JAZZ_SERIAL2_IRQ 25 |
| |
| #define JAZZ_TIMER_IRQ 31 |
| |
| |
| /* |
| * JAZZ DMA Channels |
| * Note: Channels 4...7 are not used with respect to the Acer PICA-61 |
| * chipset which does not provide these DMA channels. |
| */ |
| #define JAZZ_SCSI_DMA 0 /* SCSI */ |
| #define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ |
| #define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ |
| #define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ |
| |
| /* |
| * JAZZ R4030 MCT_ADR chip (DMA controller) |
| * Note: Virtual Addresses ! |
| */ |
| #define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ |
| #define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ |
| #define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ |
| |
| #define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ |
| #define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ |
| #define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ |
| |
| #define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ |
| #define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ |
| #define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ |
| |
| #define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ |
| #define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ |
| #define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ |
| #define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ |
| |
| /* |
| * Remote Speed Registers. |
| * |
| * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, |
| * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, |
| * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, |
| * 12: reserved, 13: free, 14: 7seg LED, 15: ??? |
| */ |
| #define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ |
| /* 0xE0000070,78,80... 0xE00000E8 */ |
| #define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ |
| #define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ |
| #define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ |
| #define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ |
| |
| /* |
| * Virtual (E)ISA controller address |
| */ |
| #define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */ |
| |
| /* |
| * Access the R4030 DMA and I/O Controller |
| */ |
| #ifndef __ASSEMBLY__ |
| |
| static inline void r4030_delay(void) |
| { |
| __asm__ __volatile__( |
| ".set\tnoreorder\n\t" |
| "nop\n\t" |
| "nop\n\t" |
| "nop\n\t" |
| "nop\n\t" |
| ".set\treorder"); |
| } |
| |
| static inline unsigned short r4030_read_reg16(unsigned long addr) |
| { |
| unsigned short ret = *((volatile unsigned short *)addr); |
| r4030_delay(); |
| return ret; |
| } |
| |
| static inline unsigned int r4030_read_reg32(unsigned long addr) |
| { |
| unsigned int ret = *((volatile unsigned int *)addr); |
| r4030_delay(); |
| return ret; |
| } |
| |
| static inline void r4030_write_reg16(unsigned long addr, unsigned val) |
| { |
| *((volatile unsigned short *)addr) = val; |
| r4030_delay(); |
| } |
| |
| static inline void r4030_write_reg32(unsigned long addr, unsigned val) |
| { |
| *((volatile unsigned int *)addr) = val; |
| r4030_delay(); |
| } |
| |
| #endif /* !__ASSEMBLY__ */ |
| |
| #define JAZZ_FDC_BASE 0xe0003000 |
| #define JAZZ_RTC_BASE 0xe0004000 |
| #define JAZZ_PORT_BASE 0xe2000000 |
| |
| #define JAZZ_EISA_BASE 0xe3000000 |
| |
| #endif /* __ASM_JAZZ_H */ |
