| // SPDX-License-Identifier: GPL-2.0+ | 
 | /* | 
 |  * Surface Book (2 and later) hot-plug driver. | 
 |  * | 
 |  * Surface Book devices (can) have a hot-pluggable discrete GPU (dGPU). This | 
 |  * driver is responsible for out-of-band hot-plug event signaling on these | 
 |  * devices. It is specifically required when the hot-plug device is in D3cold | 
 |  * and can thus not generate PCIe hot-plug events itself. | 
 |  * | 
 |  * Event signaling is handled via ACPI, which will generate the appropriate | 
 |  * device-check notifications to be picked up by the PCIe hot-plug driver. | 
 |  * | 
 |  * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com> | 
 |  */ | 
 |  | 
 | #include <linux/acpi.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/platform_device.h> | 
 |  | 
 | static const struct acpi_gpio_params shps_base_presence_int   = { 0, 0, false }; | 
 | static const struct acpi_gpio_params shps_base_presence       = { 1, 0, false }; | 
 | static const struct acpi_gpio_params shps_device_power_int    = { 2, 0, false }; | 
 | static const struct acpi_gpio_params shps_device_power        = { 3, 0, false }; | 
 | static const struct acpi_gpio_params shps_device_presence_int = { 4, 0, false }; | 
 | static const struct acpi_gpio_params shps_device_presence     = { 5, 0, false }; | 
 |  | 
 | static const struct acpi_gpio_mapping shps_acpi_gpios[] = { | 
 | 	{ "base_presence-int-gpio",   &shps_base_presence_int,   1 }, | 
 | 	{ "base_presence-gpio",       &shps_base_presence,       1 }, | 
 | 	{ "device_power-int-gpio",    &shps_device_power_int,    1 }, | 
 | 	{ "device_power-gpio",        &shps_device_power,        1 }, | 
 | 	{ "device_presence-int-gpio", &shps_device_presence_int, 1 }, | 
 | 	{ "device_presence-gpio",     &shps_device_presence,     1 }, | 
 | 	{ }, | 
 | }; | 
 |  | 
 | /* 5515a847-ed55-4b27-8352-cd320e10360a */ | 
 | static const guid_t shps_dsm_guid = | 
 | 	GUID_INIT(0x5515a847, 0xed55, 0x4b27, 0x83, 0x52, 0xcd, 0x32, 0x0e, 0x10, 0x36, 0x0a); | 
 |  | 
 | #define SHPS_DSM_REVISION		1 | 
 |  | 
 | enum shps_dsm_fn { | 
 | 	SHPS_DSM_FN_PCI_NUM_ENTRIES	= 0x01, | 
 | 	SHPS_DSM_FN_PCI_GET_ENTRIES	= 0x02, | 
 | 	SHPS_DSM_FN_IRQ_BASE_PRESENCE	= 0x03, | 
 | 	SHPS_DSM_FN_IRQ_DEVICE_POWER	= 0x04, | 
 | 	SHPS_DSM_FN_IRQ_DEVICE_PRESENCE	= 0x05, | 
 | }; | 
 |  | 
 | enum shps_irq_type { | 
 | 	/* NOTE: Must be in order of enum shps_dsm_fn above. */ | 
 | 	SHPS_IRQ_TYPE_BASE_PRESENCE	= 0, | 
 | 	SHPS_IRQ_TYPE_DEVICE_POWER	= 1, | 
 | 	SHPS_IRQ_TYPE_DEVICE_PRESENCE	= 2, | 
 | 	SHPS_NUM_IRQS, | 
 | }; | 
 |  | 
 | static const char *const shps_gpio_names[] = { | 
 | 	[SHPS_IRQ_TYPE_BASE_PRESENCE]	= "base_presence", | 
 | 	[SHPS_IRQ_TYPE_DEVICE_POWER]	= "device_power", | 
 | 	[SHPS_IRQ_TYPE_DEVICE_PRESENCE]	= "device_presence", | 
 | }; | 
 |  | 
 | struct shps_device { | 
 | 	struct mutex lock[SHPS_NUM_IRQS];  /* Protects update in shps_dsm_notify_irq() */ | 
 | 	struct gpio_desc *gpio[SHPS_NUM_IRQS]; | 
 | 	unsigned int irq[SHPS_NUM_IRQS]; | 
 | }; | 
 |  | 
 | #define SHPS_IRQ_NOT_PRESENT		((unsigned int)-1) | 
 |  | 
 | static enum shps_dsm_fn shps_dsm_fn_for_irq(enum shps_irq_type type) | 
 | { | 
 | 	return SHPS_DSM_FN_IRQ_BASE_PRESENCE + type; | 
 | } | 
 |  | 
 | static void shps_dsm_notify_irq(struct platform_device *pdev, enum shps_irq_type type) | 
 | { | 
 | 	struct shps_device *sdev = platform_get_drvdata(pdev); | 
 | 	acpi_handle handle = ACPI_HANDLE(&pdev->dev); | 
 | 	union acpi_object *result; | 
 | 	union acpi_object param; | 
 | 	int value; | 
 |  | 
 | 	mutex_lock(&sdev->lock[type]); | 
 |  | 
 | 	value = gpiod_get_value_cansleep(sdev->gpio[type]); | 
 | 	if (value < 0) { | 
 | 		mutex_unlock(&sdev->lock[type]); | 
 | 		dev_err(&pdev->dev, "failed to get gpio: %d (irq=%d)\n", type, value); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	dev_dbg(&pdev->dev, "IRQ notification via DSM (irq=%d, value=%d)\n", type, value); | 
 |  | 
 | 	param.type = ACPI_TYPE_INTEGER; | 
 | 	param.integer.value = value; | 
 |  | 
 | 	result = acpi_evaluate_dsm(handle, &shps_dsm_guid, SHPS_DSM_REVISION, | 
 | 				   shps_dsm_fn_for_irq(type), ¶m); | 
 |  | 
 | 	if (!result) { | 
 | 		dev_err(&pdev->dev, "IRQ notification via DSM failed (irq=%d, gpio=%d)\n", | 
 | 			type, value); | 
 |  | 
 | 	} else if (result->type != ACPI_TYPE_BUFFER) { | 
 | 		dev_err(&pdev->dev, | 
 | 			"IRQ notification via DSM failed: unexpected result type (irq=%d, gpio=%d)\n", | 
 | 			type, value); | 
 |  | 
 | 	} else if (result->buffer.length != 1 || result->buffer.pointer[0] != 0) { | 
 | 		dev_err(&pdev->dev, | 
 | 			"IRQ notification via DSM failed: unexpected result value (irq=%d, gpio=%d)\n", | 
 | 			type, value); | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&sdev->lock[type]); | 
 |  | 
 | 	if (result) | 
 | 		ACPI_FREE(result); | 
 | } | 
 |  | 
 | static irqreturn_t shps_handle_irq(int irq, void *data) | 
 | { | 
 | 	struct platform_device *pdev = data; | 
 | 	struct shps_device *sdev = platform_get_drvdata(pdev); | 
 | 	int type; | 
 |  | 
 | 	/* Figure out which IRQ we're handling. */ | 
 | 	for (type = 0; type < SHPS_NUM_IRQS; type++) | 
 | 		if (irq == sdev->irq[type]) | 
 | 			break; | 
 |  | 
 | 	/* We should have found our interrupt, if not: this is a bug. */ | 
 | 	if (WARN(type >= SHPS_NUM_IRQS, "invalid IRQ number: %d\n", irq)) | 
 | 		return IRQ_HANDLED; | 
 |  | 
 | 	/* Forward interrupt to ACPI via DSM. */ | 
 | 	shps_dsm_notify_irq(pdev, type); | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int shps_setup_irq(struct platform_device *pdev, enum shps_irq_type type) | 
 | { | 
 | 	unsigned long flags = IRQF_ONESHOT | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING; | 
 | 	struct shps_device *sdev = platform_get_drvdata(pdev); | 
 | 	struct gpio_desc *gpiod; | 
 | 	acpi_handle handle = ACPI_HANDLE(&pdev->dev); | 
 | 	const char *irq_name; | 
 | 	const int dsm = shps_dsm_fn_for_irq(type); | 
 | 	int status, irq; | 
 |  | 
 | 	/* | 
 | 	 * Only set up interrupts that we actually need: The Surface Book 3 | 
 | 	 * does not have a DSM for base presence, so don't set up an interrupt | 
 | 	 * for that. | 
 | 	 */ | 
 | 	if (!acpi_check_dsm(handle, &shps_dsm_guid, SHPS_DSM_REVISION, BIT(dsm))) { | 
 | 		dev_dbg(&pdev->dev, "IRQ notification via DSM not present (irq=%d)\n", type); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	gpiod = devm_gpiod_get(&pdev->dev, shps_gpio_names[type], GPIOD_ASIS); | 
 | 	if (IS_ERR(gpiod)) | 
 | 		return PTR_ERR(gpiod); | 
 |  | 
 | 	irq = gpiod_to_irq(gpiod); | 
 | 	if (irq < 0) | 
 | 		return irq; | 
 |  | 
 | 	irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "shps-irq-%d", type); | 
 | 	if (!irq_name) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	status = devm_request_threaded_irq(&pdev->dev, irq, NULL, shps_handle_irq, | 
 | 					   flags, irq_name, pdev); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	dev_dbg(&pdev->dev, "set up irq %d as type %d\n", irq, type); | 
 |  | 
 | 	sdev->gpio[type] = gpiod; | 
 | 	sdev->irq[type] = irq; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int surface_hotplug_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct shps_device *sdev = platform_get_drvdata(pdev); | 
 | 	int i; | 
 |  | 
 | 	/* Ensure that IRQs have been fully handled and won't trigger any more. */ | 
 | 	for (i = 0; i < SHPS_NUM_IRQS; i++) { | 
 | 		if (sdev->irq[i] != SHPS_IRQ_NOT_PRESENT) | 
 | 			disable_irq(sdev->irq[i]); | 
 |  | 
 | 		mutex_destroy(&sdev->lock[i]); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int surface_hotplug_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct shps_device *sdev; | 
 | 	int status, i; | 
 |  | 
 | 	/* | 
 | 	 * The MSHW0153 device is also present on the Surface Laptop 3, | 
 | 	 * however that doesn't have a hot-pluggable PCIe device. It also | 
 | 	 * doesn't have any GPIO interrupts/pins under the MSHW0153, so filter | 
 | 	 * it out here. | 
 | 	 */ | 
 | 	if (gpiod_count(&pdev->dev, NULL) < 0) | 
 | 		return -ENODEV; | 
 |  | 
 | 	status = devm_acpi_dev_add_driver_gpios(&pdev->dev, shps_acpi_gpios); | 
 | 	if (status) | 
 | 		return status; | 
 |  | 
 | 	sdev = devm_kzalloc(&pdev->dev, sizeof(*sdev), GFP_KERNEL); | 
 | 	if (!sdev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	platform_set_drvdata(pdev, sdev); | 
 |  | 
 | 	/* | 
 | 	 * Initialize IRQs so that we can safely call surface_hotplug_remove() | 
 | 	 * on errors. | 
 | 	 */ | 
 | 	for (i = 0; i < SHPS_NUM_IRQS; i++) | 
 | 		sdev->irq[i] = SHPS_IRQ_NOT_PRESENT; | 
 |  | 
 | 	/* Set up IRQs. */ | 
 | 	for (i = 0; i < SHPS_NUM_IRQS; i++) { | 
 | 		mutex_init(&sdev->lock[i]); | 
 |  | 
 | 		status = shps_setup_irq(pdev, i); | 
 | 		if (status) { | 
 | 			dev_err(&pdev->dev, "failed to set up IRQ %d: %d\n", i, status); | 
 | 			goto err; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* Ensure everything is up-to-date. */ | 
 | 	for (i = 0; i < SHPS_NUM_IRQS; i++) | 
 | 		if (sdev->irq[i] != SHPS_IRQ_NOT_PRESENT) | 
 | 			shps_dsm_notify_irq(pdev, i); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err: | 
 | 	surface_hotplug_remove(pdev); | 
 | 	return status; | 
 | } | 
 |  | 
 | static const struct acpi_device_id surface_hotplug_acpi_match[] = { | 
 | 	{ "MSHW0153", 0 }, | 
 | 	{ }, | 
 | }; | 
 | MODULE_DEVICE_TABLE(acpi, surface_hotplug_acpi_match); | 
 |  | 
 | static struct platform_driver surface_hotplug_driver = { | 
 | 	.probe = surface_hotplug_probe, | 
 | 	.remove = surface_hotplug_remove, | 
 | 	.driver = { | 
 | 		.name = "surface_hotplug", | 
 | 		.acpi_match_table = surface_hotplug_acpi_match, | 
 | 		.probe_type = PROBE_PREFER_ASYNCHRONOUS, | 
 | 	}, | 
 | }; | 
 | module_platform_driver(surface_hotplug_driver); | 
 |  | 
 | MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>"); | 
 | MODULE_DESCRIPTION("Surface Hot-Plug Signaling Driver for Surface Book Devices"); | 
 | MODULE_LICENSE("GPL"); |