| #ifndef _POWERPC_PROM_H |
| #define _POWERPC_PROM_H |
| #ifdef __KERNEL__ |
| |
| /* |
| * Definitions for talking to the Open Firmware PROM on |
| * Power Macintosh computers. |
| * |
| * Copyright (C) 1996-2005 Paul Mackerras. |
| * |
| * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| #include <linux/types.h> |
| #include <asm/irq.h> |
| #include <linux/atomic.h> |
| |
| /* These includes should be removed once implicit includes are cleaned up. */ |
| #include <linux/of.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_address.h> |
| #include <linux/of_irq.h> |
| #include <linux/platform_device.h> |
| |
| #define OF_DT_BEGIN_NODE 0x1 /* Start of node, full name */ |
| #define OF_DT_END_NODE 0x2 /* End node */ |
| #define OF_DT_PROP 0x3 /* Property: name off, size, |
| * content */ |
| #define OF_DT_NOP 0x4 /* nop */ |
| #define OF_DT_END 0x9 |
| |
| #define OF_DT_VERSION 0x10 |
| |
| /* |
| * This is what gets passed to the kernel by prom_init or kexec |
| * |
| * The dt struct contains the device tree structure, full pathes and |
| * property contents. The dt strings contain a separate block with just |
| * the strings for the property names, and is fully page aligned and |
| * self contained in a page, so that it can be kept around by the kernel, |
| * each property name appears only once in this page (cheap compression) |
| * |
| * the mem_rsvmap contains a map of reserved ranges of physical memory, |
| * passing it here instead of in the device-tree itself greatly simplifies |
| * the job of everybody. It's just a list of u64 pairs (base/size) that |
| * ends when size is 0 |
| */ |
| struct boot_param_header { |
| __be32 magic; /* magic word OF_DT_HEADER */ |
| __be32 totalsize; /* total size of DT block */ |
| __be32 off_dt_struct; /* offset to structure */ |
| __be32 off_dt_strings; /* offset to strings */ |
| __be32 off_mem_rsvmap; /* offset to memory reserve map */ |
| __be32 version; /* format version */ |
| __be32 last_comp_version; /* last compatible version */ |
| /* version 2 fields below */ |
| __be32 boot_cpuid_phys; /* Physical CPU id we're booting on */ |
| /* version 3 fields below */ |
| __be32 dt_strings_size; /* size of the DT strings block */ |
| /* version 17 fields below */ |
| __be32 dt_struct_size; /* size of the DT structure block */ |
| }; |
| |
| /* |
| * OF address retreival & translation |
| */ |
| |
| /* Parse the ibm,dma-window property of an OF node into the busno, phys and |
| * size parameters. |
| */ |
| void of_parse_dma_window(struct device_node *dn, const __be32 *dma_window, |
| unsigned long *busno, unsigned long *phys, |
| unsigned long *size); |
| |
| extern void of_instantiate_rtc(void); |
| |
| extern int of_get_ibm_chip_id(struct device_node *np); |
| |
| /* The of_drconf_cell struct defines the layout of the LMB array |
| * specified in the device tree property |
| * ibm,dynamic-reconfiguration-memory/ibm,dynamic-memory |
| */ |
| struct of_drconf_cell { |
| u64 base_addr; |
| u32 drc_index; |
| u32 reserved; |
| u32 aa_index; |
| u32 flags; |
| }; |
| |
| #define DRCONF_MEM_ASSIGNED 0x00000008 |
| #define DRCONF_MEM_AI_INVALID 0x00000040 |
| #define DRCONF_MEM_RESERVED 0x00000080 |
| |
| /* |
| * There are two methods for telling firmware what our capabilities are. |
| * Newer machines have an "ibm,client-architecture-support" method on the |
| * root node. For older machines, we have to call the "process-elf-header" |
| * method in the /packages/elf-loader node, passing it a fake 32-bit |
| * ELF header containing a couple of PT_NOTE sections that contain |
| * structures that contain various information. |
| */ |
| |
| /* New method - extensible architecture description vector. */ |
| |
| /* Option vector bits - generic bits in byte 1 */ |
| #define OV_IGNORE 0x80 /* ignore this vector */ |
| #define OV_CESSATION_POLICY 0x40 /* halt if unsupported option present*/ |
| |
| /* Option vector 1: processor architectures supported */ |
| #define OV1_PPC_2_00 0x80 /* set if we support PowerPC 2.00 */ |
| #define OV1_PPC_2_01 0x40 /* set if we support PowerPC 2.01 */ |
| #define OV1_PPC_2_02 0x20 /* set if we support PowerPC 2.02 */ |
| #define OV1_PPC_2_03 0x10 /* set if we support PowerPC 2.03 */ |
| #define OV1_PPC_2_04 0x08 /* set if we support PowerPC 2.04 */ |
| #define OV1_PPC_2_05 0x04 /* set if we support PowerPC 2.05 */ |
| #define OV1_PPC_2_06 0x02 /* set if we support PowerPC 2.06 */ |
| #define OV1_PPC_2_07 0x01 /* set if we support PowerPC 2.07 */ |
| |
| #define OV1_PPC_3_00 0x80 /* set if we support PowerPC 3.00 */ |
| |
| /* Option vector 2: Open Firmware options supported */ |
| #define OV2_REAL_MODE 0x20 /* set if we want OF in real mode */ |
| |
| /* Option vector 3: processor options supported */ |
| #define OV3_FP 0x80 /* floating point */ |
| #define OV3_VMX 0x40 /* VMX/Altivec */ |
| #define OV3_DFP 0x20 /* decimal FP */ |
| |
| /* Option vector 4: IBM PAPR implementation */ |
| #define OV4_MIN_ENT_CAP 0x01 /* minimum VP entitled capacity */ |
| |
| /* Option vector 5: PAPR/OF options supported |
| * These bits are also used in firmware_has_feature() to validate |
| * the capabilities reported for vector 5 in the device tree so we |
| * encode the vector index in the define and use the OV5_FEAT() |
| * and OV5_INDX() macros to extract the desired information. |
| */ |
| #define OV5_FEAT(x) ((x) & 0xff) |
| #define OV5_INDX(x) ((x) >> 8) |
| #define OV5_LPAR 0x0280 /* logical partitioning supported */ |
| #define OV5_SPLPAR 0x0240 /* shared-processor LPAR supported */ |
| /* ibm,dynamic-reconfiguration-memory property supported */ |
| #define OV5_DRCONF_MEMORY 0x0220 |
| #define OV5_LARGE_PAGES 0x0210 /* large pages supported */ |
| #define OV5_DONATE_DEDICATE_CPU 0x0202 /* donate dedicated CPU support */ |
| #define OV5_MSI 0x0201 /* PCIe/MSI support */ |
| #define OV5_CMO 0x0480 /* Cooperative Memory Overcommitment */ |
| #define OV5_XCMO 0x0440 /* Page Coalescing */ |
| #define OV5_TYPE1_AFFINITY 0x0580 /* Type 1 NUMA affinity */ |
| #define OV5_PRRN 0x0540 /* Platform Resource Reassignment */ |
| #define OV5_HP_EVT 0x0604 /* Hot Plug Event support */ |
| #define OV5_RESIZE_HPT 0x0601 /* Hash Page Table resizing */ |
| #define OV5_PFO_HW_RNG 0x1180 /* PFO Random Number Generator */ |
| #define OV5_PFO_HW_842 0x1140 /* PFO Compression Accelerator */ |
| #define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */ |
| #define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */ |
| #define OV5_XIVE_SUPPORT 0x17C0 /* XIVE Exploitation Support Mask */ |
| #define OV5_XIVE_LEGACY 0x1700 /* XIVE legacy mode Only */ |
| #define OV5_XIVE_EXPLOIT 0x1740 /* XIVE exploitation mode Only */ |
| #define OV5_XIVE_EITHER 0x1780 /* XIVE legacy or exploitation mode */ |
| /* MMU Base Architecture */ |
| #define OV5_MMU_SUPPORT 0x18C0 /* MMU Mode Support Mask */ |
| #define OV5_MMU_HASH 0x1800 /* Hash MMU Only */ |
| #define OV5_MMU_RADIX 0x1840 /* Radix MMU Only */ |
| #define OV5_MMU_EITHER 0x1880 /* Hash or Radix Supported */ |
| #define OV5_MMU_DYNAMIC 0x18C0 /* Hash or Radix Can Switch Later */ |
| #define OV5_NMMU 0x1820 /* Nest MMU Available */ |
| /* Hash Table Extensions */ |
| #define OV5_HASH_SEG_TBL 0x1980 /* In Memory Segment Tables Available */ |
| #define OV5_HASH_GTSE 0x1940 /* Guest Translation Shoot Down Avail */ |
| /* Radix Table Extensions */ |
| #define OV5_RADIX_GTSE 0x1A40 /* Guest Translation Shoot Down Avail */ |
| |
| /* Option Vector 6: IBM PAPR hints */ |
| #define OV6_LINUX 0x02 /* Linux is our OS */ |
| |
| #endif /* __KERNEL__ */ |
| #endif /* _POWERPC_PROM_H */ |
