| /* | 
 |  * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 and | 
 |  * only version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  */ | 
 |  | 
 | #include "phy-qcom-ufs-qmp-20nm.h" | 
 |  | 
 | #define UFS_PHY_NAME "ufs_phy_qmp_20nm" | 
 |  | 
 | static | 
 | int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy, | 
 | 					bool is_rate_B) | 
 | { | 
 | 	struct ufs_qcom_phy_calibration *tbl_A, *tbl_B; | 
 | 	int tbl_size_A, tbl_size_B; | 
 | 	u8 major = ufs_qcom_phy->host_ctrl_rev_major; | 
 | 	u16 minor = ufs_qcom_phy->host_ctrl_rev_minor; | 
 | 	u16 step = ufs_qcom_phy->host_ctrl_rev_step; | 
 | 	int err; | 
 |  | 
 | 	if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) { | 
 | 		tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0); | 
 | 		tbl_A = phy_cal_table_rate_A_1_2_0; | 
 | 	} else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) { | 
 | 		tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0); | 
 | 		tbl_A = phy_cal_table_rate_A_1_3_0; | 
 | 	} else { | 
 | 		dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n", | 
 | 			__func__); | 
 | 		err = -ENODEV; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B); | 
 | 	tbl_B = phy_cal_table_rate_B; | 
 |  | 
 | 	err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A, | 
 | 						tbl_B, tbl_size_B, is_rate_B); | 
 |  | 
 | 	if (err) | 
 | 		dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n", | 
 | 			__func__, err); | 
 |  | 
 | out: | 
 | 	return err; | 
 | } | 
 |  | 
 | static | 
 | void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common) | 
 | { | 
 | 	phy_common->quirks = | 
 | 		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; | 
 | } | 
 |  | 
 | static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static | 
 | void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val) | 
 | { | 
 | 	bool hibern8_exit_after_pwr_collapse = phy->quirks & | 
 | 		UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE; | 
 |  | 
 | 	if (val) { | 
 | 		writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); | 
 | 		/* | 
 | 		 * Before any transactions involving PHY, ensure PHY knows | 
 | 		 * that it's analog rail is powered ON. | 
 | 		 */ | 
 | 		mb(); | 
 |  | 
 | 		if (hibern8_exit_after_pwr_collapse) { | 
 | 			/* | 
 | 			 * Give atleast 1us delay after restoring PHY analog | 
 | 			 * power. | 
 | 			 */ | 
 | 			usleep_range(1, 2); | 
 | 			writel_relaxed(0x0A, phy->mmio + | 
 | 				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND); | 
 | 			writel_relaxed(0x08, phy->mmio + | 
 | 				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND); | 
 | 			/* | 
 | 			 * Make sure workaround is deactivated before proceeding | 
 | 			 * with normal PHY operations. | 
 | 			 */ | 
 | 			mb(); | 
 | 		} | 
 | 	} else { | 
 | 		if (hibern8_exit_after_pwr_collapse) { | 
 | 			writel_relaxed(0x0A, phy->mmio + | 
 | 				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND); | 
 | 			writel_relaxed(0x02, phy->mmio + | 
 | 				       QSERDES_COM_SYSCLK_EN_SEL_TXBAND); | 
 | 			/* | 
 | 			 * Make sure that above workaround is activated before | 
 | 			 * PHY analog power collapse. | 
 | 			 */ | 
 | 			mb(); | 
 | 		} | 
 |  | 
 | 		writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL); | 
 | 		/* | 
 | 		 * ensure that PHY knows its PHY analog rail is going | 
 | 		 * to be powered down | 
 | 		 */ | 
 | 		mb(); | 
 | 	} | 
 | } | 
 |  | 
 | static | 
 | void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val) | 
 | { | 
 | 	writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK, | 
 | 			phy->mmio + UFS_PHY_TX_LANE_ENABLE); | 
 | 	mb(); | 
 | } | 
 |  | 
 | static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy) | 
 | { | 
 | 	u32 tmp; | 
 |  | 
 | 	tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START); | 
 | 	tmp &= ~MASK_SERDES_START; | 
 | 	tmp |= (1 << OFFSET_SERDES_START); | 
 | 	writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START); | 
 | 	mb(); | 
 | } | 
 |  | 
 | static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) | 
 | { | 
 | 	int err = 0; | 
 | 	u32 val; | 
 |  | 
 | 	err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS, | 
 | 			val, (val & MASK_PCS_READY), 10, 1000000); | 
 | 	if (err) | 
 | 		dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n", | 
 | 			__func__, err); | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { | 
 | 	.init		= ufs_qcom_phy_qmp_20nm_init, | 
 | 	.exit		= ufs_qcom_phy_qmp_20nm_exit, | 
 | 	.power_on	= ufs_qcom_phy_power_on, | 
 | 	.power_off	= ufs_qcom_phy_power_off, | 
 | 	.owner		= THIS_MODULE, | 
 | }; | 
 |  | 
 | static struct ufs_qcom_phy_specific_ops phy_20nm_ops = { | 
 | 	.calibrate_phy		= ufs_qcom_phy_qmp_20nm_phy_calibrate, | 
 | 	.start_serdes		= ufs_qcom_phy_qmp_20nm_start_serdes, | 
 | 	.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready, | 
 | 	.set_tx_lane_enable	= ufs_qcom_phy_qmp_20nm_set_tx_lane_enable, | 
 | 	.power_control		= ufs_qcom_phy_qmp_20nm_power_control, | 
 | }; | 
 |  | 
 | static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct device *dev = &pdev->dev; | 
 | 	struct phy *generic_phy; | 
 | 	struct ufs_qcom_phy_qmp_20nm *phy; | 
 | 	struct ufs_qcom_phy *phy_common; | 
 | 	int err = 0; | 
 |  | 
 | 	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); | 
 | 	if (!phy) { | 
 | 		err = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 | 	phy_common = &phy->common_cfg; | 
 |  | 
 | 	generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common, | 
 | 				&ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops); | 
 |  | 
 | 	if (!generic_phy) { | 
 | 		err = -EIO; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	err = ufs_qcom_phy_init_clks(phy_common); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	err = ufs_qcom_phy_init_vregulators(phy_common); | 
 | 	if (err) | 
 | 		goto out; | 
 |  | 
 | 	ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common); | 
 |  | 
 | 	phy_set_drvdata(generic_phy, phy); | 
 |  | 
 | 	strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name)); | 
 |  | 
 | out: | 
 | 	return err; | 
 | } | 
 |  | 
 | static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = { | 
 | 	{.compatible = "qcom,ufs-phy-qmp-20nm"}, | 
 | 	{}, | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match); | 
 |  | 
 | static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = { | 
 | 	.probe = ufs_qcom_phy_qmp_20nm_probe, | 
 | 	.driver = { | 
 | 		.of_match_table = ufs_qcom_phy_qmp_20nm_of_match, | 
 | 		.name = "ufs_qcom_phy_qmp_20nm", | 
 | 	}, | 
 | }; | 
 |  | 
 | module_platform_driver(ufs_qcom_phy_qmp_20nm_driver); | 
 |  | 
 | MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm"); | 
 | MODULE_LICENSE("GPL v2"); |