|  | /* | 
|  | * AXP20x GPIO driver | 
|  | * | 
|  | * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under  the terms of the GNU General  Public License as published by the | 
|  | * Free Software Foundation;  either version 2 of the License, or (at your | 
|  | * option) any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/gpio/driver.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/mfd/axp20x.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regmap.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #define AXP20X_GPIO_FUNCTIONS		0x7 | 
|  | #define AXP20X_GPIO_FUNCTION_OUT_LOW	0 | 
|  | #define AXP20X_GPIO_FUNCTION_OUT_HIGH	1 | 
|  | #define AXP20X_GPIO_FUNCTION_INPUT	2 | 
|  |  | 
|  | struct axp20x_gpio { | 
|  | struct gpio_chip	chip; | 
|  | struct regmap		*regmap; | 
|  | }; | 
|  |  | 
|  | static int axp20x_gpio_get_reg(unsigned offset) | 
|  | { | 
|  | switch (offset) { | 
|  | case 0: | 
|  | return AXP20X_GPIO0_CTRL; | 
|  | case 1: | 
|  | return AXP20X_GPIO1_CTRL; | 
|  | case 2: | 
|  | return AXP20X_GPIO2_CTRL; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int axp20x_gpio_input(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct axp20x_gpio *gpio = gpiochip_get_data(chip); | 
|  | int reg; | 
|  |  | 
|  | reg = axp20x_gpio_get_reg(offset); | 
|  | if (reg < 0) | 
|  | return reg; | 
|  |  | 
|  | return regmap_update_bits(gpio->regmap, reg, | 
|  | AXP20X_GPIO_FUNCTIONS, | 
|  | AXP20X_GPIO_FUNCTION_INPUT); | 
|  | } | 
|  |  | 
|  | static int axp20x_gpio_get(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct axp20x_gpio *gpio = gpiochip_get_data(chip); | 
|  | unsigned int val; | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_read(gpio->regmap, AXP20X_GPIO20_SS, &val); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return !!(val & BIT(offset + 4)); | 
|  | } | 
|  |  | 
|  | static int axp20x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct axp20x_gpio *gpio = gpiochip_get_data(chip); | 
|  | unsigned int val; | 
|  | int reg, ret; | 
|  |  | 
|  | reg = axp20x_gpio_get_reg(offset); | 
|  | if (reg < 0) | 
|  | return reg; | 
|  |  | 
|  | ret = regmap_read(gpio->regmap, reg, &val); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* | 
|  | * This shouldn't really happen if the pin is in use already, | 
|  | * or if it's not in use yet, it doesn't matter since we're | 
|  | * going to change the value soon anyway. Default to output. | 
|  | */ | 
|  | if ((val & AXP20X_GPIO_FUNCTIONS) > 2) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * The GPIO directions are the three lowest values. | 
|  | * 2 is input, 0 and 1 are output | 
|  | */ | 
|  | return val & 2; | 
|  | } | 
|  |  | 
|  | static int axp20x_gpio_output(struct gpio_chip *chip, unsigned offset, | 
|  | int value) | 
|  | { | 
|  | struct axp20x_gpio *gpio = gpiochip_get_data(chip); | 
|  | int reg; | 
|  |  | 
|  | reg = axp20x_gpio_get_reg(offset); | 
|  | if (reg < 0) | 
|  | return reg; | 
|  |  | 
|  | return regmap_update_bits(gpio->regmap, reg, | 
|  | AXP20X_GPIO_FUNCTIONS, | 
|  | value ? AXP20X_GPIO_FUNCTION_OUT_HIGH | 
|  | : AXP20X_GPIO_FUNCTION_OUT_LOW); | 
|  | } | 
|  |  | 
|  | static void axp20x_gpio_set(struct gpio_chip *chip, unsigned offset, | 
|  | int value) | 
|  | { | 
|  | axp20x_gpio_output(chip, offset, value); | 
|  | } | 
|  |  | 
|  | static int axp20x_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); | 
|  | struct axp20x_gpio *gpio; | 
|  | int ret; | 
|  |  | 
|  | if (!of_device_is_available(pdev->dev.of_node)) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!axp20x) { | 
|  | dev_err(&pdev->dev, "Parent drvdata not set\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL); | 
|  | if (!gpio) | 
|  | return -ENOMEM; | 
|  |  | 
|  | gpio->chip.base			= -1; | 
|  | gpio->chip.can_sleep		= true; | 
|  | gpio->chip.parent		= &pdev->dev; | 
|  | gpio->chip.label		= dev_name(&pdev->dev); | 
|  | gpio->chip.owner		= THIS_MODULE; | 
|  | gpio->chip.get			= axp20x_gpio_get; | 
|  | gpio->chip.get_direction	= axp20x_gpio_get_direction; | 
|  | gpio->chip.set			= axp20x_gpio_set; | 
|  | gpio->chip.direction_input	= axp20x_gpio_input; | 
|  | gpio->chip.direction_output	= axp20x_gpio_output; | 
|  | gpio->chip.ngpio		= 3; | 
|  |  | 
|  | gpio->regmap = axp20x->regmap; | 
|  |  | 
|  | ret = devm_gpiochip_add_data(&pdev->dev, &gpio->chip, gpio); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "Failed to register GPIO chip\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | dev_info(&pdev->dev, "AXP209 GPIO driver loaded\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id axp20x_gpio_match[] = { | 
|  | { .compatible = "x-powers,axp209-gpio" }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, axp20x_gpio_match); | 
|  |  | 
|  | static struct platform_driver axp20x_gpio_driver = { | 
|  | .probe		= axp20x_gpio_probe, | 
|  | .driver = { | 
|  | .name		= "axp20x-gpio", | 
|  | .of_match_table	= axp20x_gpio_match, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(axp20x_gpio_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); | 
|  | MODULE_DESCRIPTION("AXP20x PMIC GPIO driver"); | 
|  | MODULE_LICENSE("GPL"); |