arch/powerpc/boot/dts/fsl/c293si-post.dtsi

/*
 * C293 Silicon/SoC Device Tree Source (post include)
 *
 * Copyright 2012 Freescale Semiconductor Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above copyright
 *       notice, this list of conditions and the following disclaimer in the
 *       documentation and/or other materials provided with the distribution.
 *     * Neither the name of Freescale Semiconductor nor the
 *       names of its contributors may be used to endorse or promote products
 *       derived from this software without specific prior written permission.
 *
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") as published by the Free Software
 * Foundation, either version 2 of that License or (at your option) any
 * later version.
 *
 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

&ifc {
	#address-cells = <2>;
	#size-cells = <1>;
	compatible = "fsl,ifc", "simple-bus";
	interrupts = <19 2 0 0>;
};

/* controller at 0xa000 */
&pci0 {
	compatible = "fsl,qoriq-pcie-v2.2", "fsl,qoriq-pcie";
	device_type = "pci";
	#size-cells = <2>;
	#address-cells = <3>;
	bus-range = <0 255>;
	clock-frequency = <33333333>;
	interrupts = <16 2 0 0>;

	pcie@0 {
		reg = <0 0 0 0 0>;
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		interrupts = <16 2 0 0>;
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <
			/* IDSEL 0x0 */
			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
			>;
	};
};

&soc {
	#address-cells = <1>;
	#size-cells = <1>;
	device_type = "soc";
	compatible = "simple-bus";
	bus-frequency = <0>;		// Filled out by uboot.

	ecm-law@0 {
		compatible = "fsl,ecm-law";
		reg = <0x0 0x1000>;
		fsl,num-laws = <12>;
	};

	ecm@1000 {
		compatible = "fsl,c293-ecm", "fsl,ecm";
		reg = <0x1000 0x1000>;
		interrupts = <16 2 0 0>;
	};

	memory-controller@2000 {
		compatible = "fsl,c293-memory-controller";
		reg = <0x2000 0x1000>;
		interrupts = <16 2 0 0>;
	};

/include/ "pq3-i2c-0.dtsi"
/include/ "pq3-i2c-1.dtsi"
/include/ "pq3-duart-0.dtsi"
/include/ "pq3-espi-0.dtsi"
	spi0: spi@7000 {
		fsl,espi-num-chipselects = <1>;
	};

/include/ "pq3-gpio-0.dtsi"
	L2: l2-cache-controller@20000 {
		compatible = "fsl,c293-l2-cache-controller";
		reg = <0x20000 0x1000>;
		cache-line-size = <32>;	// 32 bytes
		cache-size = <0x80000>; // L2,512K
		interrupts = <16 2 0 0>;
	};

/include/ "pq3-dma-0.dtsi"
/include/ "pq3-esdhc-0.dtsi"
	sdhc@2e000 {
		compatible = "fsl,c293-esdhc", "fsl,esdhc";
		sdhci,auto-cmd12;
	};

	crypto@80000 {
/include/ "qoriq-sec6.0-0.dtsi"
	};

	crypto@80000 {
		reg = <0x80000 0x20000>;
		ranges = <0x0 0x80000 0x20000>;

		jr@1000{
			interrupts = <45 2 0 0>;
		};
		jr@2000{
			interrupts = <57 2 0 0>;
		};
	};

	crypto@a0000 {
/include/ "qoriq-sec6.0-0.dtsi"
	};

	crypto@a0000 {
		reg = <0xa0000 0x20000>;
		ranges = <0x0 0xa0000 0x20000>;

		jr@1000{
			interrupts = <49 2 0 0>;
		};
		jr@2000{
			interrupts = <50 2 0 0>;
		};
	};

	crypto@c0000 {
/include/ "qoriq-sec6.0-0.dtsi"
	};

	crypto@c0000 {
		reg = <0xc0000 0x20000>;
		ranges = <0x0 0xc0000 0x20000>;

		jr@1000{
			interrupts = <55 2 0 0>;
		};
		jr@2000{
			interrupts = <56 2 0 0>;
		};
	};

/include/ "pq3-mpic.dtsi"
/include/ "pq3-mpic-timer-B.dtsi"

/include/ "pq3-etsec2-0.dtsi"
	enet0: ethernet@b0000 {
		queue-group@b0000 {
			reg = <0x10000 0x1000>;
			fsl,rx-bit-map = <0xff>;
			fsl,tx-bit-map = <0xff>;
		};
	};

/include/ "pq3-etsec2-1.dtsi"
	enet1: ethernet@b1000 {
		queue-group@b1000 {
			reg = <0x11000 0x1000>;
			fsl,rx-bit-map = <0xff>;
			fsl,tx-bit-map = <0xff>;
		};
	};

	global-utilities@e0000 {
		compatible = "fsl,c293-guts";
		reg = <0xe0000 0x1000>;
		fsl,has-rstcr;
	};
};