Google Git
Sign in
linux / linux / kernel / git / davem / net-next / fe0c9f58779988e769da544d54b660c76506e78f / . / drivers / acpi / executer / exfldio.c
blob: 9d0f9d2e9061d9019a5f7839cb370a6e7b154569 [file] [log] [blame]
/******************************************************************************
*
* Module Name: exfldio - Aml Field I/O
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acinterp.h>
#include <acpi/amlcode.h>
#include <acpi/acevents.h>
#include <acpi/acdispat.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exfldio")
/*******************************************************************************
*
* FUNCTION: acpi_ex_setup_region
*
* PARAMETERS: *obj_desc - Field to be read or written
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
*
* RETURN: Status
*
* DESCRIPTION: Common processing for acpi_ex_extract_from_field and
* acpi_ex_insert_into_field. Initialize the Region if necessary and
* validate the request.
*
******************************************************************************/
acpi_status
acpi_ex_setup_region (
union acpi_operand_object *obj_desc,
u32 field_datum_byte_offset)
{
acpi_status status = AE_OK;
union acpi_operand_object *rgn_desc;
ACPI_FUNCTION_TRACE_U32 ("ex_setup_region", field_datum_byte_offset);
rgn_desc = obj_desc->common_field.region_obj;
/* We must have a valid region */
if (ACPI_GET_OBJECT_TYPE (rgn_desc) != ACPI_TYPE_REGION) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Needed Region, found type %X (%s)\n",
ACPI_GET_OBJECT_TYPE (rgn_desc),
acpi_ut_get_object_type_name (rgn_desc)));
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
/*
* If the Region Address and Length have not been previously evaluated,
* evaluate them now and save the results.
*/
if (!(rgn_desc->common.flags & AOPOBJ_DATA_VALID)) {
status = acpi_ds_get_region_arguments (rgn_desc);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
}
if (rgn_desc->region.space_id == ACPI_ADR_SPACE_SMBUS) {
/* SMBus has a non-linear address space */
return_ACPI_STATUS (AE_OK);
}
#ifdef ACPI_UNDER_DEVELOPMENT
/*
* If the Field access is any_acc, we can now compute the optimal
* access (because we know know the length of the parent region)
*/
if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
}
#endif
/*
* Validate the request. The entire request from the byte offset for a
* length of one field datum (access width) must fit within the region.
* (Region length is specified in bytes)
*/
if (rgn_desc->region.length < (obj_desc->common_field.base_byte_offset
+ field_datum_byte_offset
+ obj_desc->common_field.access_byte_width)) {
if (acpi_gbl_enable_interpreter_slack) {
/*
* Slack mode only: We will go ahead and allow access to this
* field if it is within the region length rounded up to the next
* access width boundary.
*/
if (ACPI_ROUND_UP (rgn_desc->region.length,
obj_desc->common_field.access_byte_width) >=
(obj_desc->common_field.base_byte_offset +
(acpi_native_uint) obj_desc->common_field.access_byte_width +
field_datum_byte_offset)) {
return_ACPI_STATUS (AE_OK);
}
}
if (rgn_desc->region.length < obj_desc->common_field.access_byte_width) {
/*
* This is the case where the access_type (acc_word, etc.) is wider
* than the region itself. For example, a region of length one
* byte, and a field with Dword access specified.
*/
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Field [%4.4s] access width (%d bytes) too large for region [%4.4s] (length %X)\n",
acpi_ut_get_node_name (obj_desc->common_field.node),
obj_desc->common_field.access_byte_width,
acpi_ut_get_node_name (rgn_desc->region.node), rgn_desc->region.length));
}
/*
* Offset rounded up to next multiple of field width
* exceeds region length, indicate an error
*/
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Field [%4.4s] Base+Offset+Width %X+%X+%X is beyond end of region [%4.4s] (length %X)\n",
acpi_ut_get_node_name (obj_desc->common_field.node),
obj_desc->common_field.base_byte_offset,
field_datum_byte_offset, obj_desc->common_field.access_byte_width,
acpi_ut_get_node_name (rgn_desc->region.node), rgn_desc->region.length));
return_ACPI_STATUS (AE_AML_REGION_LIMIT);
}
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_access_region
*
* PARAMETERS: *obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
* *Value - Where to store value (must at least
* the size of acpi_integer)
* Function - Read or Write flag plus other region-
* dependent flags
*
* RETURN: Status
*
* DESCRIPTION: Read or Write a single field datum to an Operation Region.
*
******************************************************************************/
acpi_status
acpi_ex_access_region (
union acpi_operand_object *obj_desc,
u32 field_datum_byte_offset,
acpi_integer *value,
u32 function)
{
acpi_status status;
union acpi_operand_object *rgn_desc;
acpi_physical_address address;
ACPI_FUNCTION_TRACE ("ex_access_region");
/*
* Ensure that the region operands are fully evaluated and verify
* the validity of the request
*/
status = acpi_ex_setup_region (obj_desc, field_datum_byte_offset);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
/*
* The physical address of this field datum is:
*
* 1) The base of the region, plus
* 2) The base offset of the field, plus
* 3) The current offset into the field
*/
rgn_desc = obj_desc->common_field.region_obj;
address = rgn_desc->region.address
+ obj_desc->common_field.base_byte_offset
+ field_datum_byte_offset;
if ((function & ACPI_IO_MASK) == ACPI_READ) {
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "[READ]"));
}
else {
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "[WRITE]"));
}
ACPI_DEBUG_PRINT_RAW ((ACPI_DB_BFIELD,
" Region [%s:%X], Width %X, byte_base %X, Offset %X at %8.8X%8.8X\n",
acpi_ut_get_region_name (rgn_desc->region.space_id),
rgn_desc->region.space_id,
obj_desc->common_field.access_byte_width,
obj_desc->common_field.base_byte_offset,
field_datum_byte_offset,
ACPI_FORMAT_UINT64 (address)));
/* Invoke the appropriate address_space/op_region handler */
status = acpi_ev_address_space_dispatch (rgn_desc, function,
address, ACPI_MUL_8 (obj_desc->common_field.access_byte_width), value);
if (ACPI_FAILURE (status)) {
if (status == AE_NOT_IMPLEMENTED) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Region %s(%X) not implemented\n",
acpi_ut_get_region_name (rgn_desc->region.space_id),
rgn_desc->region.space_id));
}
else if (status == AE_NOT_EXIST) {
ACPI_REPORT_ERROR ((
"Region %s(%X) has no handler\n",
acpi_ut_get_region_name (rgn_desc->region.space_id),
rgn_desc->region.space_id));
}
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_register_overflow
*
* PARAMETERS: *obj_desc - Register(Field) to be written
* Value - Value to be stored
*
* RETURN: TRUE if value overflows the field, FALSE otherwise
*
* DESCRIPTION: Check if a value is out of range of the field being written.
* Used to check if the values written to Index and Bank registers
* are out of range. Normally, the value is simply truncated
* to fit the field, but this case is most likely a serious
* coding error in the ASL.
*
******************************************************************************/
u8
acpi_ex_register_overflow (
union acpi_operand_object *obj_desc,
acpi_integer value)
{
if (obj_desc->common_field.bit_length >= ACPI_INTEGER_BIT_SIZE) {
/*
* The field is large enough to hold the maximum integer, so we can
* never overflow it.
*/
return (FALSE);
}
if (value >= ((acpi_integer) 1 << obj_desc->common_field.bit_length)) {
/*
* The Value is larger than the maximum value that can fit into
* the register.
*/
return (TRUE);
}
/* The Value will fit into the field with no truncation */
return (FALSE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_field_datum_io
*
* PARAMETERS: *obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
* *Value - Where to store value (must be 64 bits)
* read_write - Read or Write flag
*
* RETURN: Status
*
* DESCRIPTION: Read or Write a single datum of a field. The field_type is
* demultiplexed here to handle the different types of fields
* (buffer_field, region_field, index_field, bank_field)
*
******************************************************************************/
acpi_status
acpi_ex_field_datum_io (
union acpi_operand_object *obj_desc,
u32 field_datum_byte_offset,
acpi_integer *value,
u32 read_write)
{
acpi_status status;
acpi_integer local_value;
ACPI_FUNCTION_TRACE_U32 ("ex_field_datum_io", field_datum_byte_offset);
if (read_write == ACPI_READ) {
if (!value) {
local_value = 0;
value = &local_value; /* To support reads without saving return value */
}
/* Clear the entire return buffer first, [Very Important!] */
*value = 0;
}
/*
* The four types of fields are:
*
* buffer_field - Read/write from/to a Buffer
* region_field - Read/write from/to a Operation Region.
* bank_field - Write to a Bank Register, then read/write from/to an op_region
* index_field - Write to an Index Register, then read/write from/to a Data Register
*/
switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
case ACPI_TYPE_BUFFER_FIELD:
/*
* If the buffer_field arguments have not been previously evaluated,
* evaluate them now and save the results.
*/
if (!(obj_desc->common.flags & AOPOBJ_DATA_VALID)) {
status = acpi_ds_get_buffer_field_arguments (obj_desc);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
}
if (read_write == ACPI_READ) {
/*
* Copy the data from the source buffer.
* Length is the field width in bytes.
*/
ACPI_MEMCPY (value, (obj_desc->buffer_field.buffer_obj)->buffer.pointer
+ obj_desc->buffer_field.base_byte_offset
+ field_datum_byte_offset,
obj_desc->common_field.access_byte_width);
}
else {
/*
* Copy the data to the target buffer.
* Length is the field width in bytes.
*/
ACPI_MEMCPY ((obj_desc->buffer_field.buffer_obj)->buffer.pointer
+ obj_desc->buffer_field.base_byte_offset
+ field_datum_byte_offset,
value, obj_desc->common_field.access_byte_width);
}
status = AE_OK;
break;
case ACPI_TYPE_LOCAL_BANK_FIELD:
/* Ensure that the bank_value is not beyond the capacity of the register */
if (acpi_ex_register_overflow (obj_desc->bank_field.bank_obj,
(acpi_integer) obj_desc->bank_field.value)) {
return_ACPI_STATUS (AE_AML_REGISTER_LIMIT);
}
/*
* For bank_fields, we must write the bank_value to the bank_register
* (itself a region_field) before we can access the data.
*/
status = acpi_ex_insert_into_field (obj_desc->bank_field.bank_obj,
&obj_desc->bank_field.value,
sizeof (obj_desc->bank_field.value));
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
/*
* Now that the Bank has been selected, fall through to the
* region_field case and write the datum to the Operation Region
*/
/*lint -fallthrough */
case ACPI_TYPE_LOCAL_REGION_FIELD:
/*
* For simple region_fields, we just directly access the owning
* Operation Region.
*/
status = acpi_ex_access_region (obj_desc, field_datum_byte_offset, value,
read_write);
break;
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* Ensure that the index_value is not beyond the capacity of the register */
if (acpi_ex_register_overflow (obj_desc->index_field.index_obj,
(acpi_integer) obj_desc->index_field.value)) {
return_ACPI_STATUS (AE_AML_REGISTER_LIMIT);
}
/* Write the index value to the index_register (itself a region_field) */
field_datum_byte_offset += obj_desc->index_field.value;
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Write to Index Register: Value %8.8X\n",
field_datum_byte_offset));
status = acpi_ex_insert_into_field (obj_desc->index_field.index_obj,
&field_datum_byte_offset,
sizeof (field_datum_byte_offset));
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"I/O to Data Register: value_ptr %p\n",
value));
if (read_write == ACPI_READ) {
/* Read the datum from the data_register */
status = acpi_ex_extract_from_field (obj_desc->index_field.data_obj,
value, sizeof (acpi_integer));
}
else {
/* Write the datum to the data_register */
status = acpi_ex_insert_into_field (obj_desc->index_field.data_obj,
value, sizeof (acpi_integer));
}
break;
default:
ACPI_REPORT_ERROR (("Wrong object type in field I/O %X\n",
ACPI_GET_OBJECT_TYPE (obj_desc)));
status = AE_AML_INTERNAL;
break;
}
if (ACPI_SUCCESS (status)) {
if (read_write == ACPI_READ) {
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Value Read %8.8X%8.8X, Width %d\n",
ACPI_FORMAT_UINT64 (*value),
obj_desc->common_field.access_byte_width));
}
else {
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Value Written %8.8X%8.8X, Width %d\n",
ACPI_FORMAT_UINT64 (*value),
obj_desc->common_field.access_byte_width));
}
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_write_with_update_rule
*
* PARAMETERS: *obj_desc - Field to be set
* Value - Value to store
*
* RETURN: Status
*
* DESCRIPTION: Apply the field update rule to a field write
*
******************************************************************************/
acpi_status
acpi_ex_write_with_update_rule (
union acpi_operand_object *obj_desc,
acpi_integer mask,
acpi_integer field_value,
u32 field_datum_byte_offset)
{
acpi_status status = AE_OK;
acpi_integer merged_value;
acpi_integer current_value;
ACPI_FUNCTION_TRACE_U32 ("ex_write_with_update_rule", mask);
/* Start with the new bits */
merged_value = field_value;
/* If the mask is all ones, we don't need to worry about the update rule */
if (mask != ACPI_INTEGER_MAX) {
/* Decode the update rule */
switch (obj_desc->common_field.field_flags & AML_FIELD_UPDATE_RULE_MASK) {
case AML_FIELD_UPDATE_PRESERVE:
/*
* Check if update rule needs to be applied (not if mask is all
* ones) The left shift drops the bits we want to ignore.
*/
if ((~mask << (ACPI_MUL_8 (sizeof (mask)) -
ACPI_MUL_8 (obj_desc->common_field.access_byte_width))) != 0) {
/*
* Read the current contents of the byte/word/dword containing
* the field, and merge with the new field value.
*/
status = acpi_ex_field_datum_io (obj_desc, field_datum_byte_offset,
&current_value, ACPI_READ);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
merged_value |= (current_value & ~mask);
}
break;
case AML_FIELD_UPDATE_WRITE_AS_ONES:
/* Set positions outside the field to all ones */
merged_value |= ~mask;
break;
case AML_FIELD_UPDATE_WRITE_AS_ZEROS:
/* Set positions outside the field to all zeros */
merged_value &= mask;
break;
default:
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"write_with_update_rule: Unknown update_rule setting: %X\n",
(obj_desc->common_field.field_flags & AML_FIELD_UPDATE_RULE_MASK)));
return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
}
}
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"Mask %8.8X%8.8X, datum_offset %X, Width %X, Value %8.8X%8.8X, merged_value %8.8X%8.8X\n",
ACPI_FORMAT_UINT64 (mask),
field_datum_byte_offset,
obj_desc->common_field.access_byte_width,
ACPI_FORMAT_UINT64 (field_value),
ACPI_FORMAT_UINT64 (merged_value)));
/* Write the merged value */
status = acpi_ex_field_datum_io (obj_desc, field_datum_byte_offset,
&merged_value, ACPI_WRITE);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_extract_from_field
*
* PARAMETERS: obj_desc - Field to be read
* Buffer - Where to store the field data
* buffer_length - Length of Buffer
*
* RETURN: Status
*
* DESCRIPTION: Retrieve the current value of the given field
*
******************************************************************************/
acpi_status
acpi_ex_extract_from_field (
union acpi_operand_object *obj_desc,
void *buffer,
u32 buffer_length)
{
acpi_status status;
acpi_integer raw_datum;
acpi_integer merged_datum;
u32 field_offset = 0;
u32 buffer_offset = 0;
u32 buffer_tail_bits;
u32 datum_count;
u32 field_datum_count;
u32 i;
ACPI_FUNCTION_TRACE ("ex_extract_from_field");
/* Validate target buffer and clear it */
if (buffer_length < ACPI_ROUND_BITS_UP_TO_BYTES (
obj_desc->common_field.bit_length)) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Field size %X (bits) is too large for buffer (%X)\n",
obj_desc->common_field.bit_length, buffer_length));
return_ACPI_STATUS (AE_BUFFER_OVERFLOW);
}
ACPI_MEMSET (buffer, 0, buffer_length);
/* Compute the number of datums (access width data items) */
datum_count = ACPI_ROUND_UP_TO (
obj_desc->common_field.bit_length,
obj_desc->common_field.access_bit_width);
field_datum_count = ACPI_ROUND_UP_TO (
obj_desc->common_field.bit_length +
obj_desc->common_field.start_field_bit_offset,
obj_desc->common_field.access_bit_width);
/* Priming read from the field */
status = acpi_ex_field_datum_io (obj_desc, field_offset, &raw_datum, ACPI_READ);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
merged_datum = raw_datum >> obj_desc->common_field.start_field_bit_offset;
/* Read the rest of the field */
for (i = 1; i < field_datum_count; i++) {
/* Get next input datum from the field */
field_offset += obj_desc->common_field.access_byte_width;
status = acpi_ex_field_datum_io (obj_desc, field_offset,
&raw_datum, ACPI_READ);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
/* Merge with previous datum if necessary */
merged_datum |= raw_datum <<
(obj_desc->common_field.access_bit_width - obj_desc->common_field.start_field_bit_offset);
if (i == datum_count) {
break;
}
/* Write merged datum to target buffer */
ACPI_MEMCPY (((char *) buffer) + buffer_offset, &merged_datum,
ACPI_MIN(obj_desc->common_field.access_byte_width,
buffer_length - buffer_offset));
buffer_offset += obj_desc->common_field.access_byte_width;
merged_datum = raw_datum >> obj_desc->common_field.start_field_bit_offset;
}
/* Mask off any extra bits in the last datum */
buffer_tail_bits = obj_desc->common_field.bit_length % obj_desc->common_field.access_bit_width;
if (buffer_tail_bits) {
merged_datum &= ACPI_MASK_BITS_ABOVE (buffer_tail_bits);
}
/* Write the last datum to the buffer */
ACPI_MEMCPY (((char *) buffer) + buffer_offset, &merged_datum,
ACPI_MIN(obj_desc->common_field.access_byte_width,
buffer_length - buffer_offset));
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_insert_into_field
*
* PARAMETERS: obj_desc - Field to be written
* Buffer - Data to be written
* buffer_length - Length of Buffer
*
* RETURN: Status
*
* DESCRIPTION: Store the Buffer contents into the given field
*
******************************************************************************/
acpi_status
acpi_ex_insert_into_field (
union acpi_operand_object *obj_desc,
void *buffer,
u32 buffer_length)
{
acpi_status status;
acpi_integer mask;
acpi_integer merged_datum;
acpi_integer raw_datum = 0;
u32 field_offset = 0;
u32 buffer_offset = 0;
u32 buffer_tail_bits;
u32 datum_count;
u32 field_datum_count;
u32 i;
ACPI_FUNCTION_TRACE ("ex_insert_into_field");
/* Validate input buffer */
if (buffer_length < ACPI_ROUND_BITS_UP_TO_BYTES (
obj_desc->common_field.bit_length)) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Field size %X (bits) is too large for buffer (%X)\n",
obj_desc->common_field.bit_length, buffer_length));
return_ACPI_STATUS (AE_BUFFER_OVERFLOW);
}
/* Compute the number of datums (access width data items) */
mask = ACPI_MASK_BITS_BELOW (obj_desc->common_field.start_field_bit_offset);
datum_count = ACPI_ROUND_UP_TO (obj_desc->common_field.bit_length,
obj_desc->common_field.access_bit_width);
field_datum_count = ACPI_ROUND_UP_TO (obj_desc->common_field.bit_length +
obj_desc->common_field.start_field_bit_offset,
obj_desc->common_field.access_bit_width);
/* Get initial Datum from the input buffer */
ACPI_MEMCPY (&raw_datum, buffer,
ACPI_MIN(obj_desc->common_field.access_byte_width,
buffer_length - buffer_offset));
merged_datum = raw_datum << obj_desc->common_field.start_field_bit_offset;
/* Write the entire field */
for (i = 1; i < field_datum_count; i++) {
/* Write merged datum to the target field */
merged_datum &= mask;
status = acpi_ex_write_with_update_rule (obj_desc, mask, merged_datum, field_offset);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
/* Start new output datum by merging with previous input datum */
field_offset += obj_desc->common_field.access_byte_width;
merged_datum = raw_datum >>
(obj_desc->common_field.access_bit_width - obj_desc->common_field.start_field_bit_offset);
mask = ACPI_INTEGER_MAX;
if (i == datum_count) {
break;
}
/* Get the next input datum from the buffer */
buffer_offset += obj_desc->common_field.access_byte_width;
ACPI_MEMCPY (&raw_datum, ((char *) buffer) + buffer_offset,
ACPI_MIN(obj_desc->common_field.access_byte_width,
buffer_length - buffer_offset));
merged_datum |= raw_datum << obj_desc->common_field.start_field_bit_offset;
}
/* Mask off any extra bits in the last datum */
buffer_tail_bits = (obj_desc->common_field.bit_length +
obj_desc->common_field.start_field_bit_offset) % obj_desc->common_field.access_bit_width;
if (buffer_tail_bits) {
mask &= ACPI_MASK_BITS_ABOVE (buffer_tail_bits);
}
/* Write the last datum to the field */
merged_datum &= mask;
status = acpi_ex_write_with_update_rule (obj_desc, mask, merged_datum, field_offset);
return_ACPI_STATUS (status);
}