drivers/serial/cpm_uart/cpm_uart_cpm1.c - linux/kernel/git/davem/net-next - Git at Google

 /*
  *  linux/drivers/serial/cpm_uart.c
  *
  *  Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
  *
  *  Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
  *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
  *
  *  Copyright (C) 2004 Freescale Semiconductor, Inc.
  *            (C) 2004 Intracom, S.A.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */

 #include <linux/config.h>
 #include <linux/module.h>
 #include <linux/tty.h>
 #include <linux/ioport.h>
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/console.h>
 #include <linux/sysrq.h>
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/dma-mapping.h>

 #include <asm/io.h>
 #include <asm/irq.h>

 #include <linux/serial_core.h>
 #include <linux/kernel.h>

 #include "cpm_uart.h"

 /**************************************************************/

 void cpm_line_cr_cmd(int line, int cmd)
 {
 	ushort val;
 	volatile cpm8xx_t *cp = cpmp;

 	switch (line) {
 	case UART_SMC1:
 		val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) | CPM_CR_FLG;
 		break;
 	case UART_SMC2:
 		val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) | CPM_CR_FLG;
 		break;
 	case UART_SCC1:
 		val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) | CPM_CR_FLG;
 		break;
 	case UART_SCC2:
 		val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) | CPM_CR_FLG;
 		break;
 	case UART_SCC3:
 		val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) | CPM_CR_FLG;
 		break;
 	case UART_SCC4:
 		val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) | CPM_CR_FLG;
 		break;
 	default:
 		return;

 	}
 	cp->cp_cpcr = val;
 	while (cp->cp_cpcr & CPM_CR_FLG) ;
 }

 void smc1_lineif(struct uart_cpm_port *pinfo)
 {
 	volatile cpm8xx_t *cp = cpmp;
 	unsigned int iobits = 0x000000c0;

 	if (!pinfo->is_portb) {
 		cp->cp_pbpar |= iobits;
 		cp->cp_pbdir &= ~iobits;
 		cp->cp_pbodr &= ~iobits;
 	} else {
 		((immap_t *)IMAP_ADDR)->im_ioport.iop_papar |= iobits;
 		((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
 		((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
 	}

 #ifdef CONFIG_MPC885ADS
 	/* Enable SMC1 transceivers */
 	{
 		volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4);
 		uint tmp;

 		tmp = in_be32(bcsr1);
 		tmp &= ~BCSR1_RS232EN_1;
 		out_be32(bcsr1, tmp);
 		iounmap(bcsr1);
 	}
 #endif

 	pinfo->brg = 1;
 }

 void smc2_lineif(struct uart_cpm_port *pinfo)
 {
 #ifdef CONFIG_MPC885ADS
 	volatile cpm8xx_t *cp = cpmp;
 	volatile uint __iomem *bcsr1;
 	uint tmp;

 	cp->cp_pepar |= 0x00000c00;
 	cp->cp_pedir &= ~0x00000c00;
 	cp->cp_peso &= ~0x00000400;
 	cp->cp_peso |= 0x00000800;

 	/* Enable SMC2 transceivers */
 	bcsr1 = ioremap(BCSR1, 4);
 	tmp = in_be32(bcsr1);
 	tmp &= ~BCSR1_RS232EN_2;
 	out_be32(bcsr1, tmp);
 	iounmap(bcsr1);
 #endif

 	pinfo->brg = 2;
 }

 void scc1_lineif(struct uart_cpm_port *pinfo)
 {
 	/* XXX SCC1: insert port configuration here */
 	pinfo->brg = 1;
 }

 void scc2_lineif(struct uart_cpm_port *pinfo)
 {
 	/* XXX SCC2: insert port configuration here */
 	pinfo->brg = 2;
 }

 void scc3_lineif(struct uart_cpm_port *pinfo)
 {
 	/* XXX SCC3: insert port configuration here */
 	pinfo->brg = 3;
 }

 void scc4_lineif(struct uart_cpm_port *pinfo)
 {
 	/* XXX SCC4: insert port configuration here */
 	pinfo->brg = 4;
 }

 /*
  * Allocate DP-Ram and memory buffers. We need to allocate a transmit and
  * receive buffer descriptors from dual port ram, and a character
  * buffer area from host mem. If we are allocating for the console we need
  * to do it from bootmem
  */
 int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 {
 	int dpmemsz, memsz;
 	u8 *dp_mem;
 	uint dp_offset;
 	u8 *mem_addr;
 	dma_addr_t dma_addr = 0;

 	pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);

 	dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
 	dp_offset = cpm_dpalloc(dpmemsz, 8);
 	if (IS_DPERR(dp_offset)) {
 		printk(KERN_ERR
 		       "cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
 		return -ENOMEM;
 	}
 	dp_mem = cpm_dpram_addr(dp_offset);

 	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
 	if (is_con) {
 		mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
 		dma_addr = 0;
 	} else
 		mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
 					      GFP_KERNEL);

 	if (mem_addr == NULL) {
 		cpm_dpfree(dp_offset);
 		printk(KERN_ERR
 		       "cpm_uart_cpm1.c: could not allocate coherent memory\n");
 		return -ENOMEM;
 	}

 	pinfo->dp_addr = dp_offset;
 	pinfo->mem_addr = mem_addr;
 	pinfo->dma_addr = dma_addr;

 	pinfo->rx_buf = mem_addr;
 	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
 						       * pinfo->rx_fifosize);

 	pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
 	pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;

 	return 0;
 }

 void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
 {
 	dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
 					       pinfo->rx_fifosize) +
 			  L1_CACHE_ALIGN(pinfo->tx_nrfifos *
 					 pinfo->tx_fifosize), pinfo->mem_addr,
 			  pinfo->dma_addr);

 	cpm_dpfree(pinfo->dp_addr);
 }

 /* Setup any dynamic params in the uart desc */
 int cpm_uart_init_portdesc(void)
 {
 	pr_debug("CPM uart[-]:init portdesc\n");

 	cpm_uart_nr = 0;
 #ifdef CONFIG_SERIAL_CPM_SMC1
 	cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
 /*
  *  Is SMC1 being relocated?
  */
 # ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
 	cpm_uart_ports[UART_SMC1].smcup =
 	    (smc_uart_t *) & cpmp->cp_dparam[0x3C0];
 # else
 	cpm_uart_ports[UART_SMC1].smcup =
 	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
 # endif
 	cpm_uart_ports[UART_SMC1].port.mapbase =
 	    (unsigned long)&cpmp->cp_smc[0];
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 	cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
 #endif

 #ifdef CONFIG_SERIAL_CPM_SMC2
 	cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
 	cpm_uart_ports[UART_SMC2].smcup =
 	    (smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
 	cpm_uart_ports[UART_SMC2].port.mapbase =
 	    (unsigned long)&cpmp->cp_smc[1];
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcm |= (SMCM_RX | SMCM_TX);
 	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
 	cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
 #endif

 #ifdef CONFIG_SERIAL_CPM_SCC1
 	cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
 	cpm_uart_ports[UART_SCC1].sccup =
 	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
 	cpm_uart_ports[UART_SCC1].port.mapbase =
 	    (unsigned long)&cpmp->cp_scc[0];
 	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
 #endif

 #ifdef CONFIG_SERIAL_CPM_SCC2
 	cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
 	cpm_uart_ports[UART_SCC2].sccup =
 	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
 	cpm_uart_ports[UART_SCC2].port.mapbase =
 	    (unsigned long)&cpmp->cp_scc[1];
 	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
 #endif

 #ifdef CONFIG_SERIAL_CPM_SCC3
 	cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
 	cpm_uart_ports[UART_SCC3].sccup =
 	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
 	cpm_uart_ports[UART_SCC3].port.mapbase =
 	    (unsigned long)&cpmp->cp_scc[2];
 	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
 #endif

 #ifdef CONFIG_SERIAL_CPM_SCC4
 	cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
 	cpm_uart_ports[UART_SCC4].sccup =
 	    (scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
 	cpm_uart_ports[UART_SCC4].port.mapbase =
 	    (unsigned long)&cpmp->cp_scc[3];
 	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
 	    ~(UART_SCCM_TX | UART_SCCM_RX);
 	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
 	    ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
 	cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
 	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
 #endif
 	return 0;
 }
	/*
	* linux/drivers/serial/cpm_uart.c
	*
	* Driver for CPM (SCC/SMC) serial ports; CPM1 definitions
	*
	* Maintainer: Kumar Gala (kumar.gala@freescale.com) (CPM2)
	* Pantelis Antoniou (panto@intracom.gr) (CPM1)
	*
	* Copyright (C) 2004 Freescale Semiconductor, Inc.
	* (C) 2004 Intracom, S.A.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*
	*/

	#include <linux/config.h>
	#include <linux/module.h>
	#include <linux/tty.h>
	#include <linux/ioport.h>
	#include <linux/init.h>
	#include <linux/serial.h>
	#include <linux/console.h>
	#include <linux/sysrq.h>
	#include <linux/device.h>
	#include <linux/bootmem.h>
	#include <linux/dma-mapping.h>

	#include <asm/io.h>
	#include <asm/irq.h>

	#include <linux/serial_core.h>
	#include <linux/kernel.h>

	#include "cpm_uart.h"

	/**************************************************************/

	void cpm_line_cr_cmd(int line, int cmd)
	{
	ushort val;
	volatile cpm8xx_t *cp = cpmp;

	switch (line) {
	case UART_SMC1:
	val = mk_cr_cmd(CPM_CR_CH_SMC1, cmd) \| CPM_CR_FLG;
	break;
	case UART_SMC2:
	val = mk_cr_cmd(CPM_CR_CH_SMC2, cmd) \| CPM_CR_FLG;
	break;
	case UART_SCC1:
	val = mk_cr_cmd(CPM_CR_CH_SCC1, cmd) \| CPM_CR_FLG;
	break;
	case UART_SCC2:
	val = mk_cr_cmd(CPM_CR_CH_SCC2, cmd) \| CPM_CR_FLG;
	break;
	case UART_SCC3:
	val = mk_cr_cmd(CPM_CR_CH_SCC3, cmd) \| CPM_CR_FLG;
	break;
	case UART_SCC4:
	val = mk_cr_cmd(CPM_CR_CH_SCC4, cmd) \| CPM_CR_FLG;
	break;
	default:
	return;

	}
	cp->cp_cpcr = val;
	while (cp->cp_cpcr & CPM_CR_FLG) ;
	}

	void smc1_lineif(struct uart_cpm_port *pinfo)
	{
	volatile cpm8xx_t *cp = cpmp;
	unsigned int iobits = 0x000000c0;

	if (!pinfo->is_portb) {
	cp->cp_pbpar \|= iobits;
	cp->cp_pbdir &= ~iobits;
	cp->cp_pbodr &= ~iobits;
	} else {
	((immap_t *)IMAP_ADDR)->im_ioport.iop_papar \|= iobits;
	((immap_t *)IMAP_ADDR)->im_ioport.iop_padir &= ~iobits;
	((immap_t *)IMAP_ADDR)->im_ioport.iop_paodr &= ~iobits;
	}

	#ifdef CONFIG_MPC885ADS
	/* Enable SMC1 transceivers */
	{
	volatile uint __iomem *bcsr1 = ioremap(BCSR1, 4);
	uint tmp;

	tmp = in_be32(bcsr1);
	tmp &= ~BCSR1_RS232EN_1;
	out_be32(bcsr1, tmp);
	iounmap(bcsr1);
	}
	#endif

	pinfo->brg = 1;
	}

	void smc2_lineif(struct uart_cpm_port *pinfo)
	{
	#ifdef CONFIG_MPC885ADS
	volatile cpm8xx_t *cp = cpmp;
	volatile uint __iomem *bcsr1;
	uint tmp;

	cp->cp_pepar \|= 0x00000c00;
	cp->cp_pedir &= ~0x00000c00;
	cp->cp_peso &= ~0x00000400;
	cp->cp_peso \|= 0x00000800;

	/* Enable SMC2 transceivers */
	bcsr1 = ioremap(BCSR1, 4);
	tmp = in_be32(bcsr1);
	tmp &= ~BCSR1_RS232EN_2;
	out_be32(bcsr1, tmp);
	iounmap(bcsr1);
	#endif

	pinfo->brg = 2;
	}

	void scc1_lineif(struct uart_cpm_port *pinfo)
	{
	/* XXX SCC1: insert port configuration here */
	pinfo->brg = 1;
	}

	void scc2_lineif(struct uart_cpm_port *pinfo)
	{
	/* XXX SCC2: insert port configuration here */
	pinfo->brg = 2;
	}

	void scc3_lineif(struct uart_cpm_port *pinfo)
	{
	/* XXX SCC3: insert port configuration here */
	pinfo->brg = 3;
	}

	void scc4_lineif(struct uart_cpm_port *pinfo)
	{
	/* XXX SCC4: insert port configuration here */
	pinfo->brg = 4;
	}

	/*
	* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
	* receive buffer descriptors from dual port ram, and a character
	* buffer area from host mem. If we are allocating for the console we need
	* to do it from bootmem
	*/
	int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
	{
	int dpmemsz, memsz;
	u8 *dp_mem;
	uint dp_offset;
	u8 *mem_addr;
	dma_addr_t dma_addr = 0;

	pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line);

	dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos);
	dp_offset = cpm_dpalloc(dpmemsz, 8);
	if (IS_DPERR(dp_offset)) {
	printk(KERN_ERR
	"cpm_uart_cpm1.c: could not allocate buffer descriptors\n");
	return -ENOMEM;
	}
	dp_mem = cpm_dpram_addr(dp_offset);

	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
	L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
	if (is_con) {
	mem_addr = (u8 *) m8xx_cpm_hostalloc(memsz);
	dma_addr = 0;
	} else
	mem_addr = dma_alloc_coherent(NULL, memsz, &dma_addr,
	GFP_KERNEL);

	if (mem_addr == NULL) {
	cpm_dpfree(dp_offset);
	printk(KERN_ERR
	"cpm_uart_cpm1.c: could not allocate coherent memory\n");
	return -ENOMEM;
	}

	pinfo->dp_addr = dp_offset;
	pinfo->mem_addr = mem_addr;
	pinfo->dma_addr = dma_addr;

	pinfo->rx_buf = mem_addr;
	pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
	* pinfo->rx_fifosize);

	pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
	pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;

	return 0;
	}

	void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
	{
	dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
	pinfo->rx_fifosize) +
	L1_CACHE_ALIGN(pinfo->tx_nrfifos *
	pinfo->tx_fifosize), pinfo->mem_addr,
	pinfo->dma_addr);

	cpm_dpfree(pinfo->dp_addr);
	}

	/* Setup any dynamic params in the uart desc */
	int cpm_uart_init_portdesc(void)
	{
	pr_debug("CPM uart[-]:init portdesc\n");

	cpm_uart_nr = 0;
	#ifdef CONFIG_SERIAL_CPM_SMC1
	cpm_uart_ports[UART_SMC1].smcp = &cpmp->cp_smc[0];
	/*
	* Is SMC1 being relocated?
	*/
	# ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
	cpm_uart_ports[UART_SMC1].smcup =
	(smc_uart_t *) & cpmp->cp_dparam[0x3C0];
	# else
	cpm_uart_ports[UART_SMC1].smcup =
	(smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC1];
	# endif
	cpm_uart_ports[UART_SMC1].port.mapbase =
	(unsigned long)&cpmp->cp_smc[0];
	cpm_uart_ports[UART_SMC1].smcp->smc_smcm \|= (SMCM_RX \| SMCM_TX);
	cpm_uart_ports[UART_SMC1].smcp->smc_smcmr &= ~(SMCMR_REN \| SMCMR_TEN);
	cpm_uart_ports[UART_SMC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC1;
	#endif

	#ifdef CONFIG_SERIAL_CPM_SMC2
	cpm_uart_ports[UART_SMC2].smcp = &cpmp->cp_smc[1];
	cpm_uart_ports[UART_SMC2].smcup =
	(smc_uart_t *) & cpmp->cp_dparam[PROFF_SMC2];
	cpm_uart_ports[UART_SMC2].port.mapbase =
	(unsigned long)&cpmp->cp_smc[1];
	cpm_uart_ports[UART_SMC2].smcp->smc_smcm \|= (SMCM_RX \| SMCM_TX);
	cpm_uart_ports[UART_SMC2].smcp->smc_smcmr &= ~(SMCMR_REN \| SMCMR_TEN);
	cpm_uart_ports[UART_SMC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
	cpm_uart_port_map[cpm_uart_nr++] = UART_SMC2;
	#endif

	#ifdef CONFIG_SERIAL_CPM_SCC1
	cpm_uart_ports[UART_SCC1].sccp = &cpmp->cp_scc[0];
	cpm_uart_ports[UART_SCC1].sccup =
	(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC1];
	cpm_uart_ports[UART_SCC1].port.mapbase =
	(unsigned long)&cpmp->cp_scc[0];
	cpm_uart_ports[UART_SCC1].sccp->scc_sccm &=
	~(UART_SCCM_TX \| UART_SCCM_RX);
	cpm_uart_ports[UART_SCC1].sccp->scc_gsmrl &=
	~(SCC_GSMRL_ENR \| SCC_GSMRL_ENT);
	cpm_uart_ports[UART_SCC1].port.uartclk = (((bd_t *) __res)->bi_intfreq);
	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC1;
	#endif

	#ifdef CONFIG_SERIAL_CPM_SCC2
	cpm_uart_ports[UART_SCC2].sccp = &cpmp->cp_scc[1];
	cpm_uart_ports[UART_SCC2].sccup =
	(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC2];
	cpm_uart_ports[UART_SCC2].port.mapbase =
	(unsigned long)&cpmp->cp_scc[1];
	cpm_uart_ports[UART_SCC2].sccp->scc_sccm &=
	~(UART_SCCM_TX \| UART_SCCM_RX);
	cpm_uart_ports[UART_SCC2].sccp->scc_gsmrl &=
	~(SCC_GSMRL_ENR \| SCC_GSMRL_ENT);
	cpm_uart_ports[UART_SCC2].port.uartclk = (((bd_t *) __res)->bi_intfreq);
	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC2;
	#endif

	#ifdef CONFIG_SERIAL_CPM_SCC3
	cpm_uart_ports[UART_SCC3].sccp = &cpmp->cp_scc[2];
	cpm_uart_ports[UART_SCC3].sccup =
	(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC3];
	cpm_uart_ports[UART_SCC3].port.mapbase =
	(unsigned long)&cpmp->cp_scc[2];
	cpm_uart_ports[UART_SCC3].sccp->scc_sccm &=
	~(UART_SCCM_TX \| UART_SCCM_RX);
	cpm_uart_ports[UART_SCC3].sccp->scc_gsmrl &=
	~(SCC_GSMRL_ENR \| SCC_GSMRL_ENT);
	cpm_uart_ports[UART_SCC3].port.uartclk = (((bd_t *) __res)->bi_intfreq);
	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC3;
	#endif

	#ifdef CONFIG_SERIAL_CPM_SCC4
	cpm_uart_ports[UART_SCC4].sccp = &cpmp->cp_scc[3];
	cpm_uart_ports[UART_SCC4].sccup =
	(scc_uart_t *) & cpmp->cp_dparam[PROFF_SCC4];
	cpm_uart_ports[UART_SCC4].port.mapbase =
	(unsigned long)&cpmp->cp_scc[3];
	cpm_uart_ports[UART_SCC4].sccp->scc_sccm &=
	~(UART_SCCM_TX \| UART_SCCM_RX);
	cpm_uart_ports[UART_SCC4].sccp->scc_gsmrl &=
	~(SCC_GSMRL_ENR \| SCC_GSMRL_ENT);
	cpm_uart_ports[UART_SCC4].port.uartclk = (((bd_t *) __res)->bi_intfreq);
	cpm_uart_port_map[cpm_uart_nr++] = UART_SCC4;
	#endif
	return 0;
	}