blob: 65f685479175a354d357b087c5456b414492153c [file] [log] [blame]
#!/bin/sh
# Copyright (C) 2006 Paul Mackerras, IBM Corporation <paulus@samba.org>
# This program may be used under the terms of version 2 of the GNU
# General Public License.
# This script takes a kernel binary and optionally an initrd image
# and/or a device-tree blob, and creates a bootable zImage for a
# given platform.
# Options:
# -o zImage specify output file
# -p platform specify platform (links in $platform.o)
# -i initrd specify initrd file
# -d devtree specify device-tree blob
# -s tree.dts specify device-tree source file (needs dtc installed)
# -c cache $kernel.strip.gz (use if present & newer, else make)
# -C prefix specify command prefix for cross-building tools
# (strip, objcopy, ld)
# -D dir specify directory containing data files used by script
# (default ./arch/powerpc/boot)
# -W dir specify working directory for temporary files (default .)
# defaults
kernel=
ofile=zImage
platform=of
initrd=
dtb=
dts=
cacheit=
gzip=.gz
# cross-compilation prefix
CROSS=
# directory for object and other files used by this script
object=arch/powerpc/boot
# directory for working files
tmpdir=.
usage() {
echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2
echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2
echo ' [-D datadir] [-W workingdir] [--no-gzip] [vmlinux]' >&2
exit 1
}
while [ "$#" -gt 0 ]; do
case "$1" in
-o)
shift
[ "$#" -gt 0 ] || usage
ofile="$1"
;;
-p)
shift
[ "$#" -gt 0 ] || usage
platform="$1"
;;
-i)
shift
[ "$#" -gt 0 ] || usage
initrd="$1"
;;
-d)
shift
[ "$#" -gt 0 ] || usage
dtb="$1"
;;
-s)
shift
[ "$#" -gt 0 ] || usage
dts="$1"
;;
-c)
cacheit=y
;;
-C)
shift
[ "$#" -gt 0 ] || usage
CROSS="$1"
;;
-D)
shift
[ "$#" -gt 0 ] || usage
object="$1"
;;
-W)
shift
[ "$#" -gt 0 ] || usage
tmpdir="$1"
;;
--no-gzip)
gzip=
;;
-?)
usage
;;
*)
[ -z "$kernel" ] || usage
kernel="$1"
;;
esac
shift
done
if [ -n "$dts" ]; then
if [ -z "$dtb" ]; then
dtb="$platform.dtb"
fi
dtc -O dtb -o "$dtb" -b 0 -V 16 "$dts" || exit 1
fi
if [ -z "$kernel" ]; then
kernel=vmlinux
fi
platformo=$object/"$platform".o
lds=$object/zImage.lds
ext=strip
objflags=-S
tmp=$tmpdir/zImage.$$.o
ksection=.kernel:vmlinux.strip
isection=.kernel:initrd
case "$platform" in
pmac|pseries|chrp)
platformo=$object/of.o
;;
coff)
platformo=$object/of.o
lds=$object/zImage.coff.lds
;;
miboot|uboot)
# miboot and U-boot want just the bare bits, not an ELF binary
ext=bin
objflags="-O binary"
tmp="$ofile"
ksection=image
isection=initrd
;;
cuboot*)
gzip=
;;
ps3)
platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o"
lds=$object/zImage.ps3.lds
gzip=
ext=bin
objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
ksection=.kernel:vmlinux.bin
isection=.kernel:initrd
;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then
${CROSS}objcopy $objflags "$kernel" "$vmz.$$"
if [ -n "$gzip" ]; then
gzip -f -9 "$vmz.$$"
fi
if [ -n "$cacheit" ]; then
mv -f "$vmz.$$$gzip" "$vmz$gzip"
else
vmz="$vmz.$$"
fi
fi
vmz="$vmz$gzip"
# Extract kernel version information, some platforms want to include
# it in the image header
version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \
cut -d' ' -f3`
if [ -n "$version" ]; then
uboot_version="-n Linux-$version"
fi
case "$platform" in
uboot)
rm -f "$ofile"
mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \
$uboot_version -d "$vmz" "$ofile"
if [ -z "$cacheit" ]; then
rm -f "$vmz"
fi
exit 0
;;
esac
addsec() {
${CROSS}objcopy $4 $1 \
--add-section=$3="$2" \
--set-section-flags=$3=contents,alloc,load,readonly,data
}
addsec $tmp "$vmz" $ksection $object/empty.o
if [ -z "$cacheit" ]; then
rm -f "$vmz"
fi
if [ -n "$initrd" ]; then
addsec $tmp "$initrd" $isection
fi
if [ -n "$dtb" ]; then
addsec $tmp "$dtb" .kernel:dtb
if [ -n "$dts" ]; then
rm $dtb
fi
fi
if [ "$platform" != "miboot" ]; then
${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
$platformo $tmp $object/wrapper.a
rm $tmp
fi
# Some platforms need the zImage's entry point and base address
base=0x`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1`
entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | cut -d' ' -f3`
# post-processing needed for some platforms
case "$platform" in
pseries|chrp)
$object/addnote "$ofile"
;;
coff)
${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile"
$object/hack-coff "$ofile"
;;
cuboot*)
mv "$ofile" "$ofile".elf
${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin
gzip -f -9 "$ofile".bin
mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \
$uboot_version -d "$ofile".bin.gz "$ofile"
;;
treeboot*)
mv "$ofile" "$ofile.elf"
$object/mktree "$ofile.elf" "$ofile" "$base" "$entry"
if [ -z "$cacheit" ]; then
rm -f "$ofile.elf"
fi
exit 0
;;
ps3)
# The ps3's loader supports loading gzipped binary images from flash
# rom to addr zero. The loader enters the image at addr 0x100. A
# bootwrapper overlay is use to arrange for the kernel to be loaded
# to addr zero and to have a suitable bootwrapper entry at 0x100.
# To construct the rom image, 0x100 bytes from offset 0x100 in the
# kernel is copied to the bootwrapper symbol __system_reset_kernel.
# The 0x100 bytes at the bootwrapper symbol __system_reset_overlay is
# then copied to offset 0x100. At runtime the bootwrapper program
# copies the 0x100 bytes at __system_reset_kernel to addr 0x100.
system_reset_overlay=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_overlay$' \
| cut -d' ' -f1`
system_reset_overlay=`printf "%d" $system_reset_overlay`
system_reset_kernel=0x`${CROSS}nm "$ofile" \
| grep ' __system_reset_kernel$' \
| cut -d' ' -f1`
system_reset_kernel=`printf "%d" $system_reset_kernel`
overlay_dest="256"
overlay_size="256"
rm -f "$object/otheros.bld"
${CROSS}objcopy -O binary "$ofile" "$ofile.bin"
msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
skip=$overlay_dest seek=$system_reset_kernel \
count=$overlay_size bs=1 2>&1)
if [ $? -ne "0" ]; then
echo $msg
exit 1
fi
msg=$(dd if="$ofile.bin" of="$ofile.bin" conv=notrunc \
skip=$system_reset_overlay seek=$overlay_dest \
count=$overlay_size bs=1 2>&1)
if [ $? -ne "0" ]; then
echo $msg
exit 2
fi
gzip --force -9 --stdout "$ofile.bin" > "$object/otheros.bld"
;;
esac