blob: 3d3e1c2b310f0abff4e60fdf6b6faf5fc7a322d0 [file] [log] [blame]
/* -*- linux-c -*-
*
* drivers/char/viocons.c
*
* iSeries Virtual Terminal
*
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
* Stephen Rothwell <sfr@au1.ibm.com>
*
* (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) anyu later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/proc_fs.h>
#include <linux/errno.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/init.h>
#include <linux/wait.h>
#include <linux/spinlock.h>
#include <asm/ioctls.h>
#include <linux/kd.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/sysrq.h>
#include <asm/firmware.h>
#include <asm/iseries/vio.h>
#include <asm/iseries/hv_lp_event.h>
#include <asm/iseries/hv_call_event.h>
#include <asm/iseries/hv_lp_config.h>
#include <asm/iseries/hv_call.h>
#ifdef CONFIG_VT
#error You must turn off CONFIG_VT to use CONFIG_VIOCONS
#endif
#define VIOTTY_MAGIC (0x0DCB)
#define VTTY_PORTS 10
#define VIOCONS_KERN_WARN KERN_WARNING "viocons: "
#define VIOCONS_KERN_INFO KERN_INFO "viocons: "
static DEFINE_SPINLOCK(consolelock);
static DEFINE_SPINLOCK(consoleloglock);
static int vio_sysrq_pressed;
#define VIOCHAR_NUM_BUF 16
/*
* Our port information. We store a pointer to one entry in the
* tty_driver_data
*/
static struct port_info {
int magic;
struct tty_struct *tty;
HvLpIndex lp;
u8 vcons;
u64 seq; /* sequence number of last HV send */
u64 ack; /* last ack from HV */
/*
* When we get writes faster than we can send it to the partition,
* buffer the data here. Note that used is a bit map of used buffers.
* It had better have enough bits to hold VIOCHAR_NUM_BUF the bitops assume
* it is a multiple of unsigned long
*/
unsigned long used;
u8 *buffer[VIOCHAR_NUM_BUF];
int bufferBytes[VIOCHAR_NUM_BUF];
int curbuf;
int bufferOverflow;
int overflowMessage;
} port_info[VTTY_PORTS];
#define viochar_is_console(pi) ((pi) == &port_info[0])
#define viochar_port(pi) ((pi) - &port_info[0])
static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp);
static struct tty_driver *viotty_driver;
static void hvlog(char *fmt, ...)
{
int i;
unsigned long flags;
va_list args;
static char buf[256];
spin_lock_irqsave(&consoleloglock, flags);
va_start(args, fmt);
i = vscnprintf(buf, sizeof(buf) - 1, fmt, args);
va_end(args);
buf[i++] = '\r';
HvCall_writeLogBuffer(buf, i);
spin_unlock_irqrestore(&consoleloglock, flags);
}
static void hvlogOutput(const char *buf, int count)
{
unsigned long flags;
int begin;
int index;
static const char cr = '\r';
begin = 0;
spin_lock_irqsave(&consoleloglock, flags);
for (index = 0; index < count; index++) {
if (buf[index] == '\n') {
/*
* Start right after the last '\n' or at the zeroth
* array position and output the number of characters
* including the newline.
*/
HvCall_writeLogBuffer(&buf[begin], index - begin + 1);
begin = index + 1;
HvCall_writeLogBuffer(&cr, 1);
}
}
if ((index - begin) > 0)
HvCall_writeLogBuffer(&buf[begin], index - begin);
spin_unlock_irqrestore(&consoleloglock, flags);
}
/*
* Make sure we're pointing to a valid port_info structure. Shamelessly
* plagerized from serial.c
*/
static inline int viotty_paranoia_check(struct port_info *pi,
char *name, const char *routine)
{
static const char *bad_pi_addr = VIOCONS_KERN_WARN
"warning: bad address for port_info struct (%s) in %s\n";
static const char *badmagic = VIOCONS_KERN_WARN
"warning: bad magic number for port_info struct (%s) in %s\n";
if ((pi < &port_info[0]) || (viochar_port(pi) > VTTY_PORTS)) {
printk(bad_pi_addr, name, routine);
return 1;
}
if (pi->magic != VIOTTY_MAGIC) {
printk(badmagic, name, routine);
return 1;
}
return 0;
}
/*
* Add data to our pending-send buffers.
*
* NOTE: Don't use printk in here because it gets nastily recursive.
* hvlog can be used to log to the hypervisor buffer
*/
static int buffer_add(struct port_info *pi, const char *buf, size_t len)
{
size_t bleft;
size_t curlen;
const char *curbuf;
int nextbuf;
curbuf = buf;
bleft = len;
while (bleft > 0) {
/*
* If there is no space left in the current buffer, we have
* filled everything up, so return. If we filled the previous
* buffer we would already have moved to the next one.
*/
if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) {
hvlog ("\n\rviocons: No overflow buffer available for memcpy().\n");
pi->bufferOverflow++;
pi->overflowMessage = 1;
break;
}
/*
* Turn on the "used" bit for this buffer. If it's already on,
* that's fine.
*/
set_bit(pi->curbuf, &pi->used);
/*
* See if this buffer has been allocated. If not, allocate it.
*/
if (pi->buffer[pi->curbuf] == NULL) {
pi->buffer[pi->curbuf] =
kmalloc(VIOCHAR_MAX_DATA, GFP_ATOMIC);
if (pi->buffer[pi->curbuf] == NULL) {
hvlog("\n\rviocons: kmalloc failed allocating spaces for buffer %d.",
pi->curbuf);
break;
}
}
/* Figure out how much we can copy into this buffer. */
if (bleft < (VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf]))
curlen = bleft;
else
curlen = VIOCHAR_MAX_DATA - pi->bufferBytes[pi->curbuf];
/* Copy the data into the buffer. */
memcpy(pi->buffer[pi->curbuf] + pi->bufferBytes[pi->curbuf],
curbuf, curlen);
pi->bufferBytes[pi->curbuf] += curlen;
curbuf += curlen;
bleft -= curlen;
/*
* Now see if we've filled this buffer. If not then
* we'll try to use it again later. If we've filled it
* up then we'll advance the curbuf to the next in the
* circular queue.
*/
if (pi->bufferBytes[pi->curbuf] == VIOCHAR_MAX_DATA) {
nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF;
/*
* Move to the next buffer if it hasn't been used yet
*/
if (test_bit(nextbuf, &pi->used) == 0)
pi->curbuf = nextbuf;
}
}
return len - bleft;
}
/*
* Send pending data
*
* NOTE: Don't use printk in here because it gets nastily recursive.
* hvlog can be used to log to the hypervisor buffer
*/
static void send_buffers(struct port_info *pi)
{
HvLpEvent_Rc hvrc;
int nextbuf;
struct viocharlpevent *viochar;
unsigned long flags;
spin_lock_irqsave(&consolelock, flags);
viochar = (struct viocharlpevent *)
vio_get_event_buffer(viomajorsubtype_chario);
/* Make sure we got a buffer */
if (viochar == NULL) {
hvlog("\n\rviocons: Can't get viochar buffer in sendBuffers().");
spin_unlock_irqrestore(&consolelock, flags);
return;
}
if (pi->used == 0) {
hvlog("\n\rviocons: in sendbuffers(), but no buffers used.\n");
vio_free_event_buffer(viomajorsubtype_chario, viochar);
spin_unlock_irqrestore(&consolelock, flags);
return;
}
/*
* curbuf points to the buffer we're filling. We want to
* start sending AFTER this one.
*/
nextbuf = (pi->curbuf + 1) % VIOCHAR_NUM_BUF;
/*
* Loop until we find a buffer with the used bit on
*/
while (test_bit(nextbuf, &pi->used) == 0)
nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF;
initDataEvent(viochar, pi->lp);
/*
* While we have buffers with data, and our send window
* is open, send them
*/
while ((test_bit(nextbuf, &pi->used)) &&
((pi->seq - pi->ack) < VIOCHAR_WINDOW)) {
viochar->len = pi->bufferBytes[nextbuf];
viochar->event.xCorrelationToken = pi->seq++;
viochar->event.xSizeMinus1 =
offsetof(struct viocharlpevent, data) + viochar->len;
memcpy(viochar->data, pi->buffer[nextbuf], viochar->len);
hvrc = HvCallEvent_signalLpEvent(&viochar->event);
if (hvrc) {
/*
* MUST unlock the spinlock before doing a printk
*/
vio_free_event_buffer(viomajorsubtype_chario, viochar);
spin_unlock_irqrestore(&consolelock, flags);
printk(VIOCONS_KERN_WARN
"error sending event! return code %d\n",
(int)hvrc);
return;
}
/*
* clear the used bit, zero the number of bytes in
* this buffer, and move to the next buffer
*/
clear_bit(nextbuf, &pi->used);
pi->bufferBytes[nextbuf] = 0;
nextbuf = (nextbuf + 1) % VIOCHAR_NUM_BUF;
}
/*
* If we have emptied all the buffers, start at 0 again.
* this will re-use any allocated buffers
*/
if (pi->used == 0) {
pi->curbuf = 0;
if (pi->overflowMessage)
pi->overflowMessage = 0;
if (pi->tty) {
tty_wakeup(pi->tty);
}
}
vio_free_event_buffer(viomajorsubtype_chario, viochar);
spin_unlock_irqrestore(&consolelock, flags);
}
/*
* Our internal writer. Gets called both from the console device and
* the tty device. the tty pointer will be NULL if called from the console.
* Return total number of bytes "written".
*
* NOTE: Don't use printk in here because it gets nastily recursive. hvlog
* can be used to log to the hypervisor buffer
*/
static int internal_write(struct port_info *pi, const char *buf, size_t len)
{
HvLpEvent_Rc hvrc;
size_t bleft;
size_t curlen;
const char *curbuf;
unsigned long flags;
struct viocharlpevent *viochar;
/*
* Write to the hvlog of inbound data are now done prior to
* calling internal_write() since internal_write() is only called in
* the event that an lp event path is active, which isn't the case for
* logging attempts prior to console initialization.
*
* If there is already data queued for this port, send it prior to
* attempting to send any new data.
*/
if (pi->used)
send_buffers(pi);
spin_lock_irqsave(&consolelock, flags);
viochar = vio_get_event_buffer(viomajorsubtype_chario);
if (viochar == NULL) {
spin_unlock_irqrestore(&consolelock, flags);
hvlog("\n\rviocons: Can't get vio buffer in internal_write().");
return -EAGAIN;
}
initDataEvent(viochar, pi->lp);
curbuf = buf;
bleft = len;
while ((bleft > 0) && (pi->used == 0) &&
((pi->seq - pi->ack) < VIOCHAR_WINDOW)) {
if (bleft > VIOCHAR_MAX_DATA)
curlen = VIOCHAR_MAX_DATA;
else
curlen = bleft;
viochar->event.xCorrelationToken = pi->seq++;
memcpy(viochar->data, curbuf, curlen);
viochar->len = curlen;
viochar->event.xSizeMinus1 =
offsetof(struct viocharlpevent, data) + curlen;
hvrc = HvCallEvent_signalLpEvent(&viochar->event);
if (hvrc) {
hvlog("viocons: error sending event! %d\n", (int)hvrc);
goto out;
}
curbuf += curlen;
bleft -= curlen;
}
/* If we didn't send it all, buffer as much of it as we can. */
if (bleft > 0)
bleft -= buffer_add(pi, curbuf, bleft);
out:
vio_free_event_buffer(viomajorsubtype_chario, viochar);
spin_unlock_irqrestore(&consolelock, flags);
return len - bleft;
}
static struct port_info *get_port_data(struct tty_struct *tty)
{
unsigned long flags;
struct port_info *pi;
spin_lock_irqsave(&consolelock, flags);
if (tty) {
pi = (struct port_info *)tty->driver_data;
if (!pi || viotty_paranoia_check(pi, tty->name,
"get_port_data")) {
pi = NULL;
}
} else
/*
* If this is the console device, use the lp from
* the first port entry
*/
pi = &port_info[0];
spin_unlock_irqrestore(&consolelock, flags);
return pi;
}
/*
* Initialize the common fields in a charLpEvent
*/
static void initDataEvent(struct viocharlpevent *viochar, HvLpIndex lp)
{
struct HvLpEvent *hev = &viochar->event;
memset(viochar, 0, sizeof(struct viocharlpevent));
hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DEFERRED_ACK |
HV_LP_EVENT_INT;
hev->xType = HvLpEvent_Type_VirtualIo;
hev->xSubtype = viomajorsubtype_chario | viochardata;
hev->xSourceLp = HvLpConfig_getLpIndex();
hev->xTargetLp = lp;
hev->xSizeMinus1 = sizeof(struct viocharlpevent);
hev->xSourceInstanceId = viopath_sourceinst(lp);
hev->xTargetInstanceId = viopath_targetinst(lp);
}
/*
* early console device write
*/
static void viocons_write_early(struct console *co, const char *s, unsigned count)
{
hvlogOutput(s, count);
}
/*
* console device write
*/
static void viocons_write(struct console *co, const char *s, unsigned count)
{
int index;
int begin;
struct port_info *pi;
static const char cr = '\r';
/*
* Check port data first because the target LP might be valid but
* simply not active, in which case we want to hvlog the output.
*/
pi = get_port_data(NULL);
if (pi == NULL) {
hvlog("\n\rviocons_write: unable to get port data.");
return;
}
hvlogOutput(s, count);
if (!viopath_isactive(pi->lp))
return;
/*
* Any newline character found will cause a
* carriage return character to be emitted as well.
*/
begin = 0;
for (index = 0; index < count; index++) {
if (s[index] == '\n') {
/*
* Newline found. Print everything up to and
* including the newline
*/
internal_write(pi, &s[begin], index - begin + 1);
begin = index + 1;
/* Emit a carriage return as well */
internal_write(pi, &cr, 1);
}
}
/* If any characters left to write, write them now */
if ((index - begin) > 0)
internal_write(pi, &s[begin], index - begin);
}
/*
* Work out the device associate with this console
*/
static struct tty_driver *viocons_device(struct console *c, int *index)
{
*index = c->index;
return viotty_driver;
}
/*
* console device I/O methods
*/
static struct console viocons_early = {
.name = "viocons",
.write = viocons_write_early,
.flags = CON_PRINTBUFFER,
.index = -1,
};
static struct console viocons = {
.name = "viocons",
.write = viocons_write,
.device = viocons_device,
.flags = CON_PRINTBUFFER,
.index = -1,
};
/*
* TTY Open method
*/
static int viotty_open(struct tty_struct *tty, struct file *filp)
{
int port;
unsigned long flags;
struct port_info *pi;
port = tty->index;
if ((port < 0) || (port >= VTTY_PORTS))
return -ENODEV;
spin_lock_irqsave(&consolelock, flags);
pi = &port_info[port];
/* If some other TTY is already connected here, reject the open */
if ((pi->tty) && (pi->tty != tty)) {
spin_unlock_irqrestore(&consolelock, flags);
printk(VIOCONS_KERN_WARN
"attempt to open device twice from different ttys\n");
return -EBUSY;
}
tty->driver_data = pi;
pi->tty = tty;
spin_unlock_irqrestore(&consolelock, flags);
return 0;
}
/*
* TTY Close method
*/
static void viotty_close(struct tty_struct *tty, struct file *filp)
{
unsigned long flags;
struct port_info *pi;
spin_lock_irqsave(&consolelock, flags);
pi = (struct port_info *)tty->driver_data;
if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_close")) {
spin_unlock_irqrestore(&consolelock, flags);
return;
}
if (tty->count == 1)
pi->tty = NULL;
spin_unlock_irqrestore(&consolelock, flags);
}
/*
* TTY Write method
*/
static int viotty_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct port_info *pi;
pi = get_port_data(tty);
if (pi == NULL) {
hvlog("\n\rviotty_write: no port data.");
return -ENODEV;
}
if (viochar_is_console(pi))
hvlogOutput(buf, count);
/*
* If the path to this LP is closed, don't bother doing anything more.
* just dump the data on the floor and return count. For some reason
* some user level programs will attempt to probe available tty's and
* they'll attempt a viotty_write on an invalid port which maps to an
* invalid target lp. If this is the case then ignore the
* viotty_write call and, since the viopath isn't active to this
* partition, return count.
*/
if (!viopath_isactive(pi->lp))
return count;
return internal_write(pi, buf, count);
}
/*
* TTY put_char method
*/
static int viotty_put_char(struct tty_struct *tty, unsigned char ch)
{
struct port_info *pi;
pi = get_port_data(tty);
if (pi == NULL)
return 0;
/* This will append '\r' as well if the char is '\n' */
if (viochar_is_console(pi))
hvlogOutput(&ch, 1);
if (viopath_isactive(pi->lp))
internal_write(pi, &ch, 1);
return 1;
}
/*
* TTY write_room method
*/
static int viotty_write_room(struct tty_struct *tty)
{
int i;
int room = 0;
struct port_info *pi;
unsigned long flags;
spin_lock_irqsave(&consolelock, flags);
pi = (struct port_info *)tty->driver_data;
if (!pi || viotty_paranoia_check(pi, tty->name, "viotty_write_room")) {
spin_unlock_irqrestore(&consolelock, flags);
return 0;
}
/* If no buffers are used, return the max size. */
if (pi->used == 0) {
spin_unlock_irqrestore(&consolelock, flags);
return VIOCHAR_MAX_DATA * VIOCHAR_NUM_BUF;
}
/*
* We retain the spinlock because we want to get an accurate
* count and it can change on us between each operation if we
* don't hold the spinlock.
*/
for (i = 0; ((i < VIOCHAR_NUM_BUF) && (room < VIOCHAR_MAX_DATA)); i++)
room += (VIOCHAR_MAX_DATA - pi->bufferBytes[i]);
spin_unlock_irqrestore(&consolelock, flags);
if (room > VIOCHAR_MAX_DATA)
room = VIOCHAR_MAX_DATA;
return room;
}
/*
* TTY chars_in_buffer method
*/
static int viotty_chars_in_buffer(struct tty_struct *tty)
{
return 0;
}
static int viotty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
/*
* the ioctls below read/set the flags usually shown in the leds
* don't use them - they will go away without warning
*/
case KDGETLED:
case KDGKBLED:
return put_user(0, (char *)arg);
case KDSKBLED:
return 0;
}
/* FIXME: WTF is this being called for ??? */
lock_kernel();
ret = n_tty_ioctl(tty, file, cmd, arg);
unlock_kernel();
return ret;
}
/*
* Handle an open charLpEvent. Could be either interrupt or ack
*/
static void vioHandleOpenEvent(struct HvLpEvent *event)
{
unsigned long flags;
struct viocharlpevent *cevent = (struct viocharlpevent *)event;
u8 port = cevent->virtual_device;
struct port_info *pi;
int reject = 0;
if (hvlpevent_is_ack(event)) {
if (port >= VTTY_PORTS)
return;
spin_lock_irqsave(&consolelock, flags);
/* Got the lock, don't cause console output */
pi = &port_info[port];
if (event->xRc == HvLpEvent_Rc_Good) {
pi->seq = pi->ack = 0;
/*
* This line allows connections from the primary
* partition but once one is connected from the
* primary partition nothing short of a reboot
* of linux will allow access from the hosting
* partition again without a required iSeries fix.
*/
pi->lp = event->xTargetLp;
}
spin_unlock_irqrestore(&consolelock, flags);
if (event->xRc != HvLpEvent_Rc_Good)
printk(VIOCONS_KERN_WARN
"handle_open_event: event->xRc == (%d).\n",
event->xRc);
if (event->xCorrelationToken != 0) {
atomic_t *aptr= (atomic_t *)event->xCorrelationToken;
atomic_set(aptr, 1);
} else
printk(VIOCONS_KERN_WARN
"weird...got open ack without atomic\n");
return;
}
/* This had better require an ack, otherwise complain */
if (!hvlpevent_need_ack(event)) {
printk(VIOCONS_KERN_WARN "viocharopen without ack bit!\n");
return;
}
spin_lock_irqsave(&consolelock, flags);
/* Got the lock, don't cause console output */
/* Make sure this is a good virtual tty */
if (port >= VTTY_PORTS) {
event->xRc = HvLpEvent_Rc_SubtypeError;
cevent->subtype_result_code = viorc_openRejected;
/*
* Flag state here since we can't printk while holding
* a spinlock.
*/
reject = 1;
} else {
pi = &port_info[port];
if ((pi->lp != HvLpIndexInvalid) &&
(pi->lp != event->xSourceLp)) {
/*
* If this is tty is already connected to a different
* partition, fail.
*/
event->xRc = HvLpEvent_Rc_SubtypeError;
cevent->subtype_result_code = viorc_openRejected;
reject = 2;
} else {
pi->lp = event->xSourceLp;
event->xRc = HvLpEvent_Rc_Good;
cevent->subtype_result_code = viorc_good;
pi->seq = pi->ack = 0;
reject = 0;
}
}
spin_unlock_irqrestore(&consolelock, flags);
if (reject == 1)
printk(VIOCONS_KERN_WARN "open rejected: bad virtual tty.\n");
else if (reject == 2)
printk(VIOCONS_KERN_WARN
"open rejected: console in exclusive use by another partition.\n");
/* Return the acknowledgement */
HvCallEvent_ackLpEvent(event);
}
/*
* Handle a close charLpEvent. This should ONLY be an Interrupt because the
* virtual console should never actually issue a close event to the hypervisor
* because the virtual console never goes away. A close event coming from the
* hypervisor simply means that there are no client consoles connected to the
* virtual console.
*
* Regardless of the number of connections masqueraded on the other side of
* the hypervisor ONLY ONE close event should be called to accompany the ONE
* open event that is called. The close event should ONLY be called when NO
* MORE connections (masqueraded or not) exist on the other side of the
* hypervisor.
*/
static void vioHandleCloseEvent(struct HvLpEvent *event)
{
unsigned long flags;
struct viocharlpevent *cevent = (struct viocharlpevent *)event;
u8 port = cevent->virtual_device;
if (hvlpevent_is_int(event)) {
if (port >= VTTY_PORTS) {
printk(VIOCONS_KERN_WARN
"close message from invalid virtual device.\n");
return;
}
/* For closes, just mark the console partition invalid */
spin_lock_irqsave(&consolelock, flags);
/* Got the lock, don't cause console output */
if (port_info[port].lp == event->xSourceLp)
port_info[port].lp = HvLpIndexInvalid;
spin_unlock_irqrestore(&consolelock, flags);
printk(VIOCONS_KERN_INFO "close from %d\n", event->xSourceLp);
} else
printk(VIOCONS_KERN_WARN
"got unexpected close acknowlegement\n");
}
/*
* Handle a config charLpEvent. Could be either interrupt or ack
*/
static void vioHandleConfig(struct HvLpEvent *event)
{
struct viocharlpevent *cevent = (struct viocharlpevent *)event;
HvCall_writeLogBuffer(cevent->data, cevent->len);
if (cevent->data[0] == 0x01)
printk(VIOCONS_KERN_INFO "window resized to %d: %d: %d: %d\n",
cevent->data[1], cevent->data[2],
cevent->data[3], cevent->data[4]);
else
printk(VIOCONS_KERN_WARN "unknown config event\n");
}
/*
* Handle a data charLpEvent.
*/
static void vioHandleData(struct HvLpEvent *event)
{
struct tty_struct *tty;
unsigned long flags;
struct viocharlpevent *cevent = (struct viocharlpevent *)event;
struct port_info *pi;
int index;
int num_pushed;
u8 port = cevent->virtual_device;
if (port >= VTTY_PORTS) {
printk(VIOCONS_KERN_WARN "data on invalid virtual device %d\n",
port);
return;
}
/*
* Hold the spinlock so that we don't take an interrupt that
* changes tty between the time we fetch the port_info
* pointer and the time we paranoia check.
*/
spin_lock_irqsave(&consolelock, flags);
pi = &port_info[port];
/*
* Change 05/01/2003 - Ryan Arnold: If a partition other than
* the current exclusive partition tries to send us data
* events then just drop them on the floor because we don't
* want his stinking data. He isn't authorized to receive
* data because he wasn't the first one to get the console,
* therefore he shouldn't be allowed to send data either.
* This will work without an iSeries fix.
*/
if (pi->lp != event->xSourceLp) {
spin_unlock_irqrestore(&consolelock, flags);
return;
}
tty = pi->tty;
if (tty == NULL) {
spin_unlock_irqrestore(&consolelock, flags);
printk(VIOCONS_KERN_WARN "no tty for virtual device %d\n",
port);
return;
}
if (tty->magic != TTY_MAGIC) {
spin_unlock_irqrestore(&consolelock, flags);
printk(VIOCONS_KERN_WARN "tty bad magic\n");
return;
}
/*
* Just to be paranoid, make sure the tty points back to this port
*/
pi = (struct port_info *)tty->driver_data;
if (!pi || viotty_paranoia_check(pi, tty->name, "vioHandleData")) {
spin_unlock_irqrestore(&consolelock, flags);
return;
}
spin_unlock_irqrestore(&consolelock, flags);
/*
* Change 07/21/2003 - Ryan Arnold: functionality added to
* support sysrq utilizing ^O as the sysrq key. The sysrq
* functionality will only work if built into the kernel and
* then only if sysrq is enabled through the proc filesystem.
*/
num_pushed = 0;
for (index = 0; index < cevent->len; index++) {
/*
* Will be optimized away if !CONFIG_MAGIC_SYSRQ:
*/
if (sysrq_on()) {
/* 0x0f is the ascii character for ^O */
if (cevent->data[index] == '\x0f') {
vio_sysrq_pressed = 1;
/*
* continue because we don't want to add
* the sysrq key into the data string.
*/
continue;
} else if (vio_sysrq_pressed) {
handle_sysrq(cevent->data[index], tty);
vio_sysrq_pressed = 0;
/*
* continue because we don't want to add
* the sysrq sequence into the data string.
*/
continue;
}
}
/*
* The sysrq sequence isn't included in this check if
* sysrq is enabled and compiled into the kernel because
* the sequence will never get inserted into the buffer.
* Don't attempt to copy more data into the buffer than we
* have room for because it would fail without indication.
*/
if(tty_insert_flip_char(tty, cevent->data[index], TTY_NORMAL) == 0) {
printk(VIOCONS_KERN_WARN "input buffer overflow!\n");
break;
}
num_pushed++;
}
if (num_pushed)
tty_flip_buffer_push(tty);
}
/*
* Handle an ack charLpEvent.
*/
static void vioHandleAck(struct HvLpEvent *event)
{
struct viocharlpevent *cevent = (struct viocharlpevent *)event;
unsigned long flags;
u8 port = cevent->virtual_device;
if (port >= VTTY_PORTS) {
printk(VIOCONS_KERN_WARN "data on invalid virtual device\n");
return;
}
spin_lock_irqsave(&consolelock, flags);
port_info[port].ack = event->xCorrelationToken;
spin_unlock_irqrestore(&consolelock, flags);
if (port_info[port].used)
send_buffers(&port_info[port]);
}
/*
* Handle charLpEvents and route to the appropriate routine
*/
static void vioHandleCharEvent(struct HvLpEvent *event)
{
int charminor;
if (event == NULL)
return;
charminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK;
switch (charminor) {
case viocharopen:
vioHandleOpenEvent(event);
break;
case viocharclose:
vioHandleCloseEvent(event);
break;
case viochardata:
vioHandleData(event);
break;
case viocharack:
vioHandleAck(event);
break;
case viocharconfig:
vioHandleConfig(event);
break;
default:
if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) {
event->xRc = HvLpEvent_Rc_InvalidSubtype;
HvCallEvent_ackLpEvent(event);
}
}
}
/*
* Send an open event
*/
static int send_open(HvLpIndex remoteLp, void *sem)
{
return HvCallEvent_signalLpEventFast(remoteLp,
HvLpEvent_Type_VirtualIo,
viomajorsubtype_chario | viocharopen,
HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck,
viopath_sourceinst(remoteLp),
viopath_targetinst(remoteLp),
(u64)(unsigned long)sem, VIOVERSION << 16,
0, 0, 0, 0);
}
static const struct tty_operations serial_ops = {
.open = viotty_open,
.close = viotty_close,
.write = viotty_write,
.put_char = viotty_put_char,
.write_room = viotty_write_room,
.chars_in_buffer = viotty_chars_in_buffer,
.ioctl = viotty_ioctl,
};
static int __init viocons_init2(void)
{
atomic_t wait_flag;
int rc;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
/* +2 for fudge */
rc = viopath_open(HvLpConfig_getPrimaryLpIndex(),
viomajorsubtype_chario, VIOCHAR_WINDOW + 2);
if (rc)
printk(VIOCONS_KERN_WARN "error opening to primary %d\n", rc);
if (viopath_hostLp == HvLpIndexInvalid)
vio_set_hostlp();
/*
* And if the primary is not the same as the hosting LP, open to the
* hosting lp
*/
if ((viopath_hostLp != HvLpIndexInvalid) &&
(viopath_hostLp != HvLpConfig_getPrimaryLpIndex())) {
printk(VIOCONS_KERN_INFO "open path to hosting (%d)\n",
viopath_hostLp);
rc = viopath_open(viopath_hostLp, viomajorsubtype_chario,
VIOCHAR_WINDOW + 2); /* +2 for fudge */
if (rc)
printk(VIOCONS_KERN_WARN
"error opening to partition %d: %d\n",
viopath_hostLp, rc);
}
if (vio_setHandler(viomajorsubtype_chario, vioHandleCharEvent) < 0)
printk(VIOCONS_KERN_WARN
"error seting handler for console events!\n");
/*
* First, try to open the console to the hosting lp.
* Wait on a semaphore for the response.
*/
atomic_set(&wait_flag, 0);
if ((viopath_isactive(viopath_hostLp)) &&
(send_open(viopath_hostLp, (void *)&wait_flag) == 0)) {
printk(VIOCONS_KERN_INFO "hosting partition %d\n",
viopath_hostLp);
while (atomic_read(&wait_flag) == 0)
mb();
atomic_set(&wait_flag, 0);
}
/*
* If we don't have an active console, try the primary
*/
if ((!viopath_isactive(port_info[0].lp)) &&
(viopath_isactive(HvLpConfig_getPrimaryLpIndex())) &&
(send_open(HvLpConfig_getPrimaryLpIndex(), (void *)&wait_flag)
== 0)) {
printk(VIOCONS_KERN_INFO "opening console to primary partition\n");
while (atomic_read(&wait_flag) == 0)
mb();
}
/* Initialize the tty_driver structure */
viotty_driver = alloc_tty_driver(VTTY_PORTS);
viotty_driver->owner = THIS_MODULE;
viotty_driver->driver_name = "vioconsole";
viotty_driver->name = "tty";
viotty_driver->name_base = 1;
viotty_driver->major = TTY_MAJOR;
viotty_driver->minor_start = 1;
viotty_driver->type = TTY_DRIVER_TYPE_CONSOLE;
viotty_driver->subtype = 1;
viotty_driver->init_termios = tty_std_termios;
viotty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS;
tty_set_operations(viotty_driver, &serial_ops);
if (tty_register_driver(viotty_driver)) {
printk(VIOCONS_KERN_WARN "couldn't register console driver\n");
put_tty_driver(viotty_driver);
viotty_driver = NULL;
}
unregister_console(&viocons_early);
register_console(&viocons);
return 0;
}
static int __init viocons_init(void)
{
int i;
if (!firmware_has_feature(FW_FEATURE_ISERIES))
return -ENODEV;
printk(VIOCONS_KERN_INFO "registering console\n");
for (i = 0; i < VTTY_PORTS; i++) {
port_info[i].lp = HvLpIndexInvalid;
port_info[i].magic = VIOTTY_MAGIC;
}
HvCall_setLogBufferFormatAndCodepage(HvCall_LogBuffer_ASCII, 437);
add_preferred_console("viocons", 0, NULL);
register_console(&viocons_early);
return 0;
}
console_initcall(viocons_init);
module_init(viocons_init2);