|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source | 
|  | * | 
|  | * Copyright 2006 Pengutronix | 
|  | * Sascha Hauer <s.hauer@pengutronix.de> | 
|  | * Copyright 2007 Pengutronix | 
|  | * Juergen Beisert <j.beisert@pengutronix.de> | 
|  | */ | 
|  |  | 
|  | /include/ "mpc5200b.dtsi" | 
|  |  | 
|  | &gpt0 { fsl,has-wdt; }; | 
|  | &gpt2 { gpio-controller; }; | 
|  | &gpt3 { gpio-controller; }; | 
|  | &gpt4 { gpio-controller; }; | 
|  | &gpt5 { gpio-controller; }; | 
|  | &gpt6 { gpio-controller; }; | 
|  | &gpt7 { gpio-controller; }; | 
|  |  | 
|  | / { | 
|  | model = "phytec,pcm030"; | 
|  | compatible = "phytec,pcm030"; | 
|  |  | 
|  | soc5200@f0000000 { | 
|  | audioplatform: psc@2000 { /* PSC1 in ac97 mode */ | 
|  | compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; | 
|  | cell-index = <0>; | 
|  | }; | 
|  |  | 
|  | /* PSC2 port is used by CAN1/2 */ | 
|  | psc@2200 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | psc@2400 { /* PSC3 in UART mode */ | 
|  | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | 
|  | }; | 
|  |  | 
|  | /* PSC4 is ??? */ | 
|  | psc@2600 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | /* PSC5 is ??? */ | 
|  | psc@2800 { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | psc@2c00 { /* PSC6 in UART mode */ | 
|  | compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | 
|  | }; | 
|  |  | 
|  | ethernet@3000 { | 
|  | phy-handle = <&phy0>; | 
|  | }; | 
|  |  | 
|  | mdio@3000 { | 
|  | phy0: ethernet-phy@0 { | 
|  | reg = <0>; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | i2c@3d40 { | 
|  | rtc@51 { | 
|  | compatible = "nxp,pcf8563"; | 
|  | reg = <0x51>; | 
|  | }; | 
|  | eeprom@52 { | 
|  | compatible = "catalyst,24c32", "atmel,24c32"; | 
|  | reg = <0x52>; | 
|  | pagesize = <32>; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | sram@8000 { | 
|  | compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; | 
|  | reg = <0x8000 0x4000>; | 
|  | }; | 
|  | }; | 
|  |  | 
|  | pci@f0000d00 { | 
|  | interrupt-map-mask = <0xf800 0 0 7>; | 
|  | interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot | 
|  | 0xc000 0 0 2 &mpc5200_pic 1 1 3 | 
|  | 0xc000 0 0 3 &mpc5200_pic 1 2 3 | 
|  | 0xc000 0 0 4 &mpc5200_pic 1 3 3 | 
|  |  | 
|  | 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot | 
|  | 0xc800 0 0 2 &mpc5200_pic 1 2 3 | 
|  | 0xc800 0 0 3 &mpc5200_pic 1 3 3 | 
|  | 0xc800 0 0 4 &mpc5200_pic 0 0 3>; | 
|  | ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 | 
|  | 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 | 
|  | 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; | 
|  | }; | 
|  |  | 
|  | localbus { | 
|  | status = "disabled"; | 
|  | }; | 
|  |  | 
|  | sound { | 
|  | compatible = "phytec,pcm030-audio-fabric"; | 
|  | asoc-platform = <&audioplatform>; | 
|  | }; | 
|  | }; |