| /* | |
| * | |
| * 3780i.c -- helper routines for the 3780i DSP | |
| * | |
| * | |
| * Written By: Mike Sullivan IBM Corporation | |
| * | |
| * Copyright (C) 1999 IBM Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * NO WARRANTY | |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR | |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT | |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is | |
| * solely responsible for determining the appropriateness of using and | |
| * distributing the Program and assumes all risks associated with its | |
| * exercise of rights under this Agreement, including but not limited to | |
| * the risks and costs of program errors, damage to or loss of data, | |
| * programs or equipment, and unavailability or interruption of operations. | |
| * | |
| * DISCLAIMER OF LIABILITY | |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY | |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR | |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE | |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED | |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| * | |
| * 10/23/2000 - Alpha Release | |
| * First release to the public | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/unistd.h> | |
| #include <linux/delay.h> | |
| #include <linux/ioport.h> | |
| #include <linux/init.h> | |
| #include <linux/bitops.h> | |
| #include <linux/sched.h> /* cond_resched() */ | |
| #include <asm/io.h> | |
| #include <asm/uaccess.h> | |
| #include <asm/system.h> | |
| #include <asm/irq.h> | |
| #include "smapi.h" | |
| #include "mwavedd.h" | |
| #include "3780i.h" | |
| static DEFINE_SPINLOCK(dsp_lock); | |
| static void PaceMsaAccess(unsigned short usDspBaseIO) | |
| { | |
| cond_resched(); | |
| udelay(100); | |
| cond_resched(); | |
| } | |
| unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO, | |
| unsigned long ulMsaAddr) | |
| { | |
| unsigned long flags; | |
| unsigned short val; | |
| PRINTK_3(TRACE_3780I, | |
| "3780i::dsp3780I_ReadMsaCfg entry usDspBaseIO %x ulMsaAddr %lx\n", | |
| usDspBaseIO, ulMsaAddr); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr); | |
| OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16)); | |
| val = InWordDsp(DSP_MsaDataDSISHigh); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| PRINTK_2(TRACE_3780I, "3780i::dsp3780I_ReadMsaCfg exit val %x\n", val); | |
| return val; | |
| } | |
| void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO, | |
| unsigned long ulMsaAddr, unsigned short usValue) | |
| { | |
| unsigned long flags; | |
| PRINTK_4(TRACE_3780I, | |
| "3780i::dsp3780i_WriteMsaCfg entry usDspBaseIO %x ulMsaAddr %lx usValue %x\n", | |
| usDspBaseIO, ulMsaAddr, usValue); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr); | |
| OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16)); | |
| OutWordDsp(DSP_MsaDataDSISHigh, usValue); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| } | |
| static void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex, | |
| unsigned char ucValue) | |
| { | |
| DSP_ISA_SLAVE_CONTROL rSlaveControl; | |
| DSP_ISA_SLAVE_CONTROL rSlaveControl_Save; | |
| PRINTK_4(TRACE_3780I, | |
| "3780i::dsp3780i_WriteGenCfg entry usDspBaseIO %x uIndex %x ucValue %x\n", | |
| usDspBaseIO, uIndex, ucValue); | |
| MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl); | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780i_WriteGenCfg rSlaveControl %x\n", | |
| MKBYTE(rSlaveControl)); | |
| rSlaveControl_Save = rSlaveControl; | |
| rSlaveControl.ConfigMode = TRUE; | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780i_WriteGenCfg entry rSlaveControl+ConfigMode %x\n", | |
| MKBYTE(rSlaveControl)); | |
| OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl)); | |
| OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex); | |
| OutByteDsp(DSP_ConfigData, ucValue); | |
| OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save)); | |
| PRINTK_1(TRACE_3780I, "3780i::dsp3780i_WriteGenCfg exit\n"); | |
| } | |
| #if 0 | |
| unsigned char dsp3780I_ReadGenCfg(unsigned short usDspBaseIO, | |
| unsigned uIndex) | |
| { | |
| DSP_ISA_SLAVE_CONTROL rSlaveControl; | |
| DSP_ISA_SLAVE_CONTROL rSlaveControl_Save; | |
| unsigned char ucValue; | |
| PRINTK_3(TRACE_3780I, | |
| "3780i::dsp3780i_ReadGenCfg entry usDspBaseIO %x uIndex %x\n", | |
| usDspBaseIO, uIndex); | |
| MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl); | |
| rSlaveControl_Save = rSlaveControl; | |
| rSlaveControl.ConfigMode = TRUE; | |
| OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl)); | |
| OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex); | |
| ucValue = InByteDsp(DSP_ConfigData); | |
| OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save)); | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780i_ReadGenCfg exit ucValue %x\n", ucValue); | |
| return ucValue; | |
| } | |
| #endif /* 0 */ | |
| int dsp3780I_EnableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings, | |
| unsigned short *pIrqMap, | |
| unsigned short *pDmaMap) | |
| { | |
| unsigned long flags; | |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; | |
| int i; | |
| DSP_UART_CFG_1 rUartCfg1; | |
| DSP_UART_CFG_2 rUartCfg2; | |
| DSP_HBRIDGE_CFG_1 rHBridgeCfg1; | |
| DSP_HBRIDGE_CFG_2 rHBridgeCfg2; | |
| DSP_BUSMASTER_CFG_1 rBusmasterCfg1; | |
| DSP_BUSMASTER_CFG_2 rBusmasterCfg2; | |
| DSP_ISA_PROT_CFG rIsaProtCfg; | |
| DSP_POWER_MGMT_CFG rPowerMgmtCfg; | |
| DSP_HBUS_TIMER_CFG rHBusTimerCfg; | |
| DSP_LBUS_TIMEOUT_DISABLE rLBusTimeoutDisable; | |
| DSP_CHIP_RESET rChipReset; | |
| DSP_CLOCK_CONTROL_1 rClockControl1; | |
| DSP_CLOCK_CONTROL_2 rClockControl2; | |
| DSP_ISA_SLAVE_CONTROL rSlaveControl; | |
| DSP_HBRIDGE_CONTROL rHBridgeControl; | |
| unsigned short ChipID = 0; | |
| unsigned short tval; | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780I_EnableDSP entry pSettings->bDSPEnabled %x\n", | |
| pSettings->bDSPEnabled); | |
| if (!pSettings->bDSPEnabled) { | |
| PRINTK_ERROR( KERN_ERR "3780i::dsp3780I_EnableDSP: Error: DSP not enabled. Aborting.\n" ); | |
| return -EIO; | |
| } | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780i_EnableDSP entry pSettings->bModemEnabled %x\n", | |
| pSettings->bModemEnabled); | |
| if (pSettings->bModemEnabled) { | |
| rUartCfg1.Reserved = rUartCfg2.Reserved = 0; | |
| rUartCfg1.IrqActiveLow = pSettings->bUartIrqActiveLow; | |
| rUartCfg1.IrqPulse = pSettings->bUartIrqPulse; | |
| rUartCfg1.Irq = | |
| (unsigned char) pIrqMap[pSettings->usUartIrq]; | |
| switch (pSettings->usUartBaseIO) { | |
| case 0x03F8: | |
| rUartCfg1.BaseIO = 0; | |
| break; | |
| case 0x02F8: | |
| rUartCfg1.BaseIO = 1; | |
| break; | |
| case 0x03E8: | |
| rUartCfg1.BaseIO = 2; | |
| break; | |
| case 0x02E8: | |
| rUartCfg1.BaseIO = 3; | |
| break; | |
| } | |
| rUartCfg2.Enable = TRUE; | |
| } | |
| rHBridgeCfg1.Reserved = rHBridgeCfg2.Reserved = 0; | |
| rHBridgeCfg1.IrqActiveLow = pSettings->bDspIrqActiveLow; | |
| rHBridgeCfg1.IrqPulse = pSettings->bDspIrqPulse; | |
| rHBridgeCfg1.Irq = (unsigned char) pIrqMap[pSettings->usDspIrq]; | |
| rHBridgeCfg1.AccessMode = 1; | |
| rHBridgeCfg2.Enable = TRUE; | |
| rBusmasterCfg2.Reserved = 0; | |
| rBusmasterCfg1.Dma = (unsigned char) pDmaMap[pSettings->usDspDma]; | |
| rBusmasterCfg1.NumTransfers = | |
| (unsigned char) pSettings->usNumTransfers; | |
| rBusmasterCfg1.ReRequest = (unsigned char) pSettings->usReRequest; | |
| rBusmasterCfg1.MEMCS16 = pSettings->bEnableMEMCS16; | |
| rBusmasterCfg2.IsaMemCmdWidth = | |
| (unsigned char) pSettings->usIsaMemCmdWidth; | |
| rIsaProtCfg.Reserved = 0; | |
| rIsaProtCfg.GateIOCHRDY = pSettings->bGateIOCHRDY; | |
| rPowerMgmtCfg.Reserved = 0; | |
| rPowerMgmtCfg.Enable = pSettings->bEnablePwrMgmt; | |
| rHBusTimerCfg.LoadValue = | |
| (unsigned char) pSettings->usHBusTimerLoadValue; | |
| rLBusTimeoutDisable.Reserved = 0; | |
| rLBusTimeoutDisable.DisableTimeout = | |
| pSettings->bDisableLBusTimeout; | |
| MKWORD(rChipReset) = ~pSettings->usChipletEnable; | |
| rClockControl1.Reserved1 = rClockControl1.Reserved2 = 0; | |
| rClockControl1.N_Divisor = pSettings->usN_Divisor; | |
| rClockControl1.M_Multiplier = pSettings->usM_Multiplier; | |
| rClockControl2.Reserved = 0; | |
| rClockControl2.PllBypass = pSettings->bPllBypass; | |
| /* Issue a soft reset to the chip */ | |
| /* Note: Since we may be coming in with 3780i clocks suspended, we must keep | |
| * soft-reset active for 10ms. | |
| */ | |
| rSlaveControl.ClockControl = 0; | |
| rSlaveControl.SoftReset = TRUE; | |
| rSlaveControl.ConfigMode = FALSE; | |
| rSlaveControl.Reserved = 0; | |
| PRINTK_4(TRACE_3780I, | |
| "3780i::dsp3780i_EnableDSP usDspBaseIO %x index %x taddr %x\n", | |
| usDspBaseIO, DSP_IsaSlaveControl, | |
| usDspBaseIO + DSP_IsaSlaveControl); | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780i_EnableDSP rSlaveContrl %x\n", | |
| MKWORD(rSlaveControl)); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); | |
| MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl); | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780i_EnableDSP rSlaveControl 2 %x\n", tval); | |
| for (i = 0; i < 11; i++) | |
| udelay(2000); | |
| rSlaveControl.SoftReset = FALSE; | |
| OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); | |
| MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl); | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780i_EnableDSP rSlaveControl 3 %x\n", tval); | |
| /* Program our general configuration registers */ | |
| WriteGenCfg(DSP_HBridgeCfg1Index, MKBYTE(rHBridgeCfg1)); | |
| WriteGenCfg(DSP_HBridgeCfg2Index, MKBYTE(rHBridgeCfg2)); | |
| WriteGenCfg(DSP_BusMasterCfg1Index, MKBYTE(rBusmasterCfg1)); | |
| WriteGenCfg(DSP_BusMasterCfg2Index, MKBYTE(rBusmasterCfg2)); | |
| WriteGenCfg(DSP_IsaProtCfgIndex, MKBYTE(rIsaProtCfg)); | |
| WriteGenCfg(DSP_PowerMgCfgIndex, MKBYTE(rPowerMgmtCfg)); | |
| WriteGenCfg(DSP_HBusTimerCfgIndex, MKBYTE(rHBusTimerCfg)); | |
| if (pSettings->bModemEnabled) { | |
| WriteGenCfg(DSP_UartCfg1Index, MKBYTE(rUartCfg1)); | |
| WriteGenCfg(DSP_UartCfg2Index, MKBYTE(rUartCfg2)); | |
| } | |
| rHBridgeControl.EnableDspInt = FALSE; | |
| rHBridgeControl.MemAutoInc = TRUE; | |
| rHBridgeControl.IoAutoInc = FALSE; | |
| rHBridgeControl.DiagnosticMode = FALSE; | |
| PRINTK_3(TRACE_3780I, | |
| "3780i::dsp3780i_EnableDSP DSP_HBridgeControl %x rHBridgeControl %x\n", | |
| DSP_HBridgeControl, MKWORD(rHBridgeControl)); | |
| OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| WriteMsaCfg(DSP_LBusTimeoutDisable, MKWORD(rLBusTimeoutDisable)); | |
| WriteMsaCfg(DSP_ClockControl_1, MKWORD(rClockControl1)); | |
| WriteMsaCfg(DSP_ClockControl_2, MKWORD(rClockControl2)); | |
| WriteMsaCfg(DSP_ChipReset, MKWORD(rChipReset)); | |
| ChipID = ReadMsaCfg(DSP_ChipID); | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780I_EnableDSP exiting bRC=TRUE, ChipID %x\n", | |
| ChipID); | |
| return 0; | |
| } | |
| int dsp3780I_DisableDSP(DSP_3780I_CONFIG_SETTINGS * pSettings) | |
| { | |
| unsigned long flags; | |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; | |
| DSP_ISA_SLAVE_CONTROL rSlaveControl; | |
| PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP entry\n"); | |
| rSlaveControl.ClockControl = 0; | |
| rSlaveControl.SoftReset = TRUE; | |
| rSlaveControl.ConfigMode = FALSE; | |
| rSlaveControl.Reserved = 0; | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); | |
| udelay(5); | |
| rSlaveControl.ClockControl = 1; | |
| OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| udelay(5); | |
| PRINTK_1(TRACE_3780I, "3780i::dsp3780i_DisableDSP exit\n"); | |
| return 0; | |
| } | |
| int dsp3780I_Reset(DSP_3780I_CONFIG_SETTINGS * pSettings) | |
| { | |
| unsigned long flags; | |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; | |
| DSP_BOOT_DOMAIN rBootDomain; | |
| DSP_HBRIDGE_CONTROL rHBridgeControl; | |
| PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset entry\n"); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| /* Mask DSP to PC interrupt */ | |
| MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl); | |
| PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rHBridgeControl %x\n", | |
| MKWORD(rHBridgeControl)); | |
| rHBridgeControl.EnableDspInt = FALSE; | |
| OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* Reset the core via the boot domain register */ | |
| rBootDomain.ResetCore = TRUE; | |
| rBootDomain.Halt = TRUE; | |
| rBootDomain.NMI = TRUE; | |
| rBootDomain.Reserved = 0; | |
| PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Reset rBootDomain %x\n", | |
| MKWORD(rBootDomain)); | |
| WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); | |
| /* Reset all the chiplets and then reactivate them */ | |
| WriteMsaCfg(DSP_ChipReset, 0xFFFF); | |
| udelay(5); | |
| WriteMsaCfg(DSP_ChipReset, | |
| (unsigned short) (~pSettings->usChipletEnable)); | |
| PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Reset exit bRC=0\n"); | |
| return 0; | |
| } | |
| int dsp3780I_Run(DSP_3780I_CONFIG_SETTINGS * pSettings) | |
| { | |
| unsigned long flags; | |
| unsigned short usDspBaseIO = pSettings->usDspBaseIO; | |
| DSP_BOOT_DOMAIN rBootDomain; | |
| DSP_HBRIDGE_CONTROL rHBridgeControl; | |
| PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run entry\n"); | |
| /* Transition the core to a running state */ | |
| rBootDomain.ResetCore = TRUE; | |
| rBootDomain.Halt = FALSE; | |
| rBootDomain.NMI = TRUE; | |
| rBootDomain.Reserved = 0; | |
| WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); | |
| udelay(5); | |
| rBootDomain.ResetCore = FALSE; | |
| WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); | |
| udelay(5); | |
| rBootDomain.NMI = FALSE; | |
| WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain)); | |
| udelay(5); | |
| /* Enable DSP to PC interrupt */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl); | |
| rHBridgeControl.EnableDspInt = TRUE; | |
| PRINTK_2(TRACE_3780I, "3780i::dsp3780i_Run rHBridgeControl %x\n", | |
| MKWORD(rHBridgeControl)); | |
| OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| PRINTK_1(TRACE_3780I, "3780i::dsp3780i_Run exit bRC=TRUE\n"); | |
| return 0; | |
| } | |
| int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer, | |
| unsigned uCount, unsigned long ulDSPAddr) | |
| { | |
| unsigned long flags; | |
| unsigned short __user *pusBuffer = pvBuffer; | |
| unsigned short val; | |
| PRINTK_5(TRACE_3780I, | |
| "3780i::dsp3780I_ReadDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", | |
| usDspBaseIO, pusBuffer, uCount, ulDSPAddr); | |
| /* Set the initial MSA address. No adjustments need to be made to data store addresses */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); | |
| OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* Transfer the memory block */ | |
| while (uCount-- != 0) { | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| val = InWordDsp(DSP_MsaDataDSISHigh); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| if(put_user(val, pusBuffer++)) | |
| return -EFAULT; | |
| PRINTK_3(TRACE_3780I, | |
| "3780I::dsp3780I_ReadDStore uCount %x val %x\n", | |
| uCount, val); | |
| PaceMsaAccess(usDspBaseIO); | |
| } | |
| PRINTK_1(TRACE_3780I, | |
| "3780I::dsp3780I_ReadDStore exit bRC=TRUE\n"); | |
| return 0; | |
| } | |
| int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO, | |
| void __user *pvBuffer, unsigned uCount, | |
| unsigned long ulDSPAddr) | |
| { | |
| unsigned long flags; | |
| unsigned short __user *pusBuffer = pvBuffer; | |
| unsigned short val; | |
| PRINTK_5(TRACE_3780I, | |
| "3780i::dsp3780I_ReadAndDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", | |
| usDspBaseIO, pusBuffer, uCount, ulDSPAddr); | |
| /* Set the initial MSA address. No adjustments need to be made to data store addresses */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); | |
| OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* Transfer the memory block */ | |
| while (uCount-- != 0) { | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| val = InWordDsp(DSP_ReadAndClear); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| if(put_user(val, pusBuffer++)) | |
| return -EFAULT; | |
| PRINTK_3(TRACE_3780I, | |
| "3780I::dsp3780I_ReadAndCleanDStore uCount %x val %x\n", | |
| uCount, val); | |
| PaceMsaAccess(usDspBaseIO); | |
| } | |
| PRINTK_1(TRACE_3780I, | |
| "3780I::dsp3780I_ReadAndClearDStore exit bRC=TRUE\n"); | |
| return 0; | |
| } | |
| int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer, | |
| unsigned uCount, unsigned long ulDSPAddr) | |
| { | |
| unsigned long flags; | |
| unsigned short __user *pusBuffer = pvBuffer; | |
| PRINTK_5(TRACE_3780I, | |
| "3780i::dsp3780D_WriteDStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", | |
| usDspBaseIO, pusBuffer, uCount, ulDSPAddr); | |
| /* Set the initial MSA address. No adjustments need to be made to data store addresses */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); | |
| OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* Transfer the memory block */ | |
| while (uCount-- != 0) { | |
| unsigned short val; | |
| if(get_user(val, pusBuffer++)) | |
| return -EFAULT; | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaDataDSISHigh, val); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| PRINTK_3(TRACE_3780I, | |
| "3780I::dsp3780I_WriteDStore uCount %x val %x\n", | |
| uCount, val); | |
| PaceMsaAccess(usDspBaseIO); | |
| } | |
| PRINTK_1(TRACE_3780I, | |
| "3780I::dsp3780D_WriteDStore exit bRC=TRUE\n"); | |
| return 0; | |
| } | |
| int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer, | |
| unsigned uCount, unsigned long ulDSPAddr) | |
| { | |
| unsigned long flags; | |
| unsigned short __user *pusBuffer = pvBuffer; | |
| PRINTK_5(TRACE_3780I, | |
| "3780i::dsp3780I_ReadIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", | |
| usDspBaseIO, pusBuffer, uCount, ulDSPAddr); | |
| /* | |
| * Set the initial MSA address. To convert from an instruction store | |
| * address to an MSA address | |
| * shift the address two bits to the left and set bit 22 | |
| */ | |
| ulDSPAddr = (ulDSPAddr << 2) | (1 << 22); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); | |
| OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* Transfer the memory block */ | |
| while (uCount-- != 0) { | |
| unsigned short val_lo, val_hi; | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| val_lo = InWordDsp(DSP_MsaDataISLow); | |
| val_hi = InWordDsp(DSP_MsaDataDSISHigh); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| if(put_user(val_lo, pusBuffer++)) | |
| return -EFAULT; | |
| if(put_user(val_hi, pusBuffer++)) | |
| return -EFAULT; | |
| PRINTK_4(TRACE_3780I, | |
| "3780I::dsp3780I_ReadIStore uCount %x val_lo %x val_hi %x\n", | |
| uCount, val_lo, val_hi); | |
| PaceMsaAccess(usDspBaseIO); | |
| } | |
| PRINTK_1(TRACE_3780I, | |
| "3780I::dsp3780I_ReadIStore exit bRC=TRUE\n"); | |
| return 0; | |
| } | |
| int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer, | |
| unsigned uCount, unsigned long ulDSPAddr) | |
| { | |
| unsigned long flags; | |
| unsigned short __user *pusBuffer = pvBuffer; | |
| PRINTK_5(TRACE_3780I, | |
| "3780i::dsp3780I_WriteIStore entry usDspBaseIO %x, pusBuffer %p, uCount %x, ulDSPAddr %lx\n", | |
| usDspBaseIO, pusBuffer, uCount, ulDSPAddr); | |
| /* | |
| * Set the initial MSA address. To convert from an instruction store | |
| * address to an MSA address | |
| * shift the address two bits to the left and set bit 22 | |
| */ | |
| ulDSPAddr = (ulDSPAddr << 2) | (1 << 22); | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr); | |
| OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| /* Transfer the memory block */ | |
| while (uCount-- != 0) { | |
| unsigned short val_lo, val_hi; | |
| if(get_user(val_lo, pusBuffer++)) | |
| return -EFAULT; | |
| if(get_user(val_hi, pusBuffer++)) | |
| return -EFAULT; | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| OutWordDsp(DSP_MsaDataISLow, val_lo); | |
| OutWordDsp(DSP_MsaDataDSISHigh, val_hi); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| PRINTK_4(TRACE_3780I, | |
| "3780I::dsp3780I_WriteIStore uCount %x val_lo %x val_hi %x\n", | |
| uCount, val_lo, val_hi); | |
| PaceMsaAccess(usDspBaseIO); | |
| } | |
| PRINTK_1(TRACE_3780I, | |
| "3780I::dsp3780I_WriteIStore exit bRC=TRUE\n"); | |
| return 0; | |
| } | |
| int dsp3780I_GetIPCSource(unsigned short usDspBaseIO, | |
| unsigned short *pusIPCSource) | |
| { | |
| unsigned long flags; | |
| DSP_HBRIDGE_CONTROL rHBridgeControl; | |
| unsigned short temp; | |
| PRINTK_3(TRACE_3780I, | |
| "3780i::dsp3780I_GetIPCSource entry usDspBaseIO %x pusIPCSource %p\n", | |
| usDspBaseIO, pusIPCSource); | |
| /* | |
| * Disable DSP to PC interrupts, read the interrupt register, | |
| * clear the pending IPC bits, and reenable DSP to PC interrupts | |
| */ | |
| spin_lock_irqsave(&dsp_lock, flags); | |
| MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl); | |
| rHBridgeControl.EnableDspInt = FALSE; | |
| OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); | |
| *pusIPCSource = InWordDsp(DSP_Interrupt); | |
| temp = (unsigned short) ~(*pusIPCSource); | |
| PRINTK_3(TRACE_3780I, | |
| "3780i::dsp3780I_GetIPCSource, usIPCSource %x ~ %x\n", | |
| *pusIPCSource, temp); | |
| OutWordDsp(DSP_Interrupt, (unsigned short) ~(*pusIPCSource)); | |
| rHBridgeControl.EnableDspInt = TRUE; | |
| OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl)); | |
| spin_unlock_irqrestore(&dsp_lock, flags); | |
| PRINTK_2(TRACE_3780I, | |
| "3780i::dsp3780I_GetIPCSource exit usIPCSource %x\n", | |
| *pusIPCSource); | |
| return 0; | |
| } |