| /* | |
| * rtc-ds1307.c - RTC driver for some mostly-compatible I2C chips. | |
| * | |
| * Copyright (C) 2005 James Chapman (ds1337 core) | |
| * Copyright (C) 2006 David Brownell | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/slab.h> | |
| #include <linux/i2c.h> | |
| #include <linux/string.h> | |
| #include <linux/rtc.h> | |
| #include <linux/bcd.h> | |
| /* We can't determine type by probing, but if we expect pre-Linux code | |
| * to have set the chip up as a clock (turning on the oscillator and | |
| * setting the date and time), Linux can ignore the non-clock features. | |
| * That's a natural job for a factory or repair bench. | |
| * | |
| * This is currently a simple no-alarms driver. If your board has the | |
| * alarm irq wired up on a ds1337 or ds1339, and you want to use that, | |
| * then look at the rtc-rs5c372 driver for code to steal... | |
| */ | |
| enum ds_type { | |
| ds_1307, | |
| ds_1337, | |
| ds_1338, | |
| ds_1339, | |
| ds_1340, | |
| m41t00, | |
| // rs5c372 too? different address... | |
| }; | |
| /* RTC registers don't differ much, except for the century flag */ | |
| #define DS1307_REG_SECS 0x00 /* 00-59 */ | |
| # define DS1307_BIT_CH 0x80 | |
| # define DS1340_BIT_nEOSC 0x80 | |
| #define DS1307_REG_MIN 0x01 /* 00-59 */ | |
| #define DS1307_REG_HOUR 0x02 /* 00-23, or 1-12{am,pm} */ | |
| # define DS1307_BIT_12HR 0x40 /* in REG_HOUR */ | |
| # define DS1307_BIT_PM 0x20 /* in REG_HOUR */ | |
| # define DS1340_BIT_CENTURY_EN 0x80 /* in REG_HOUR */ | |
| # define DS1340_BIT_CENTURY 0x40 /* in REG_HOUR */ | |
| #define DS1307_REG_WDAY 0x03 /* 01-07 */ | |
| #define DS1307_REG_MDAY 0x04 /* 01-31 */ | |
| #define DS1307_REG_MONTH 0x05 /* 01-12 */ | |
| # define DS1337_BIT_CENTURY 0x80 /* in REG_MONTH */ | |
| #define DS1307_REG_YEAR 0x06 /* 00-99 */ | |
| /* Other registers (control, status, alarms, trickle charge, NVRAM, etc) | |
| * start at 7, and they differ a LOT. Only control and status matter for | |
| * basic RTC date and time functionality; be careful using them. | |
| */ | |
| #define DS1307_REG_CONTROL 0x07 /* or ds1338 */ | |
| # define DS1307_BIT_OUT 0x80 | |
| # define DS1338_BIT_OSF 0x20 | |
| # define DS1307_BIT_SQWE 0x10 | |
| # define DS1307_BIT_RS1 0x02 | |
| # define DS1307_BIT_RS0 0x01 | |
| #define DS1337_REG_CONTROL 0x0e | |
| # define DS1337_BIT_nEOSC 0x80 | |
| # define DS1337_BIT_RS2 0x10 | |
| # define DS1337_BIT_RS1 0x08 | |
| # define DS1337_BIT_INTCN 0x04 | |
| # define DS1337_BIT_A2IE 0x02 | |
| # define DS1337_BIT_A1IE 0x01 | |
| #define DS1340_REG_CONTROL 0x07 | |
| # define DS1340_BIT_OUT 0x80 | |
| # define DS1340_BIT_FT 0x40 | |
| # define DS1340_BIT_CALIB_SIGN 0x20 | |
| # define DS1340_M_CALIBRATION 0x1f | |
| #define DS1340_REG_FLAG 0x09 | |
| # define DS1340_BIT_OSF 0x80 | |
| #define DS1337_REG_STATUS 0x0f | |
| # define DS1337_BIT_OSF 0x80 | |
| # define DS1337_BIT_A2I 0x02 | |
| # define DS1337_BIT_A1I 0x01 | |
| #define DS1339_REG_TRICKLE 0x10 | |
| struct ds1307 { | |
| u8 reg_addr; | |
| u8 regs[8]; | |
| enum ds_type type; | |
| struct i2c_msg msg[2]; | |
| struct i2c_client *client; | |
| struct i2c_client dev; | |
| struct rtc_device *rtc; | |
| }; | |
| struct chip_desc { | |
| char name[9]; | |
| unsigned nvram56:1; | |
| unsigned alarm:1; | |
| enum ds_type type; | |
| }; | |
| static const struct chip_desc chips[] = { { | |
| .name = "ds1307", | |
| .type = ds_1307, | |
| .nvram56 = 1, | |
| }, { | |
| .name = "ds1337", | |
| .type = ds_1337, | |
| .alarm = 1, | |
| }, { | |
| .name = "ds1338", | |
| .type = ds_1338, | |
| .nvram56 = 1, | |
| }, { | |
| .name = "ds1339", | |
| .type = ds_1339, | |
| .alarm = 1, | |
| }, { | |
| .name = "ds1340", | |
| .type = ds_1340, | |
| }, { | |
| .name = "m41t00", | |
| .type = m41t00, | |
| }, }; | |
| static inline const struct chip_desc *find_chip(const char *s) | |
| { | |
| unsigned i; | |
| for (i = 0; i < ARRAY_SIZE(chips); i++) | |
| if (strnicmp(s, chips[i].name, sizeof chips[i].name) == 0) | |
| return &chips[i]; | |
| return NULL; | |
| } | |
| static int ds1307_get_time(struct device *dev, struct rtc_time *t) | |
| { | |
| struct ds1307 *ds1307 = dev_get_drvdata(dev); | |
| int tmp; | |
| /* read the RTC date and time registers all at once */ | |
| ds1307->msg[1].flags = I2C_M_RD; | |
| ds1307->msg[1].len = 7; | |
| tmp = i2c_transfer(to_i2c_adapter(ds1307->client->dev.parent), | |
| ds1307->msg, 2); | |
| if (tmp != 2) { | |
| dev_err(dev, "%s error %d\n", "read", tmp); | |
| return -EIO; | |
| } | |
| dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | |
| "read", | |
| ds1307->regs[0], ds1307->regs[1], | |
| ds1307->regs[2], ds1307->regs[3], | |
| ds1307->regs[4], ds1307->regs[5], | |
| ds1307->regs[6]); | |
| t->tm_sec = BCD2BIN(ds1307->regs[DS1307_REG_SECS] & 0x7f); | |
| t->tm_min = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | |
| tmp = ds1307->regs[DS1307_REG_HOUR] & 0x3f; | |
| t->tm_hour = BCD2BIN(tmp); | |
| t->tm_wday = BCD2BIN(ds1307->regs[DS1307_REG_WDAY] & 0x07) - 1; | |
| t->tm_mday = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | |
| tmp = ds1307->regs[DS1307_REG_MONTH] & 0x1f; | |
| t->tm_mon = BCD2BIN(tmp) - 1; | |
| /* assume 20YY not 19YY, and ignore DS1337_BIT_CENTURY */ | |
| t->tm_year = BCD2BIN(ds1307->regs[DS1307_REG_YEAR]) + 100; | |
| dev_dbg(dev, "%s secs=%d, mins=%d, " | |
| "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | |
| "read", t->tm_sec, t->tm_min, | |
| t->tm_hour, t->tm_mday, | |
| t->tm_mon, t->tm_year, t->tm_wday); | |
| /* initial clock setting can be undefined */ | |
| return rtc_valid_tm(t); | |
| } | |
| static int ds1307_set_time(struct device *dev, struct rtc_time *t) | |
| { | |
| struct ds1307 *ds1307 = dev_get_drvdata(dev); | |
| int result; | |
| int tmp; | |
| u8 *buf = ds1307->regs; | |
| dev_dbg(dev, "%s secs=%d, mins=%d, " | |
| "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", | |
| "write", t->tm_sec, t->tm_min, | |
| t->tm_hour, t->tm_mday, | |
| t->tm_mon, t->tm_year, t->tm_wday); | |
| *buf++ = 0; /* first register addr */ | |
| buf[DS1307_REG_SECS] = BIN2BCD(t->tm_sec); | |
| buf[DS1307_REG_MIN] = BIN2BCD(t->tm_min); | |
| buf[DS1307_REG_HOUR] = BIN2BCD(t->tm_hour); | |
| buf[DS1307_REG_WDAY] = BIN2BCD(t->tm_wday + 1); | |
| buf[DS1307_REG_MDAY] = BIN2BCD(t->tm_mday); | |
| buf[DS1307_REG_MONTH] = BIN2BCD(t->tm_mon + 1); | |
| /* assume 20YY not 19YY */ | |
| tmp = t->tm_year - 100; | |
| buf[DS1307_REG_YEAR] = BIN2BCD(tmp); | |
| switch (ds1307->type) { | |
| case ds_1337: | |
| case ds_1339: | |
| buf[DS1307_REG_MONTH] |= DS1337_BIT_CENTURY; | |
| break; | |
| case ds_1340: | |
| buf[DS1307_REG_HOUR] |= DS1340_BIT_CENTURY_EN | |
| | DS1340_BIT_CENTURY; | |
| break; | |
| default: | |
| break; | |
| } | |
| ds1307->msg[1].flags = 0; | |
| ds1307->msg[1].len = 8; | |
| dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | |
| "write", buf[0], buf[1], buf[2], buf[3], | |
| buf[4], buf[5], buf[6]); | |
| result = i2c_transfer(to_i2c_adapter(ds1307->client->dev.parent), | |
| &ds1307->msg[1], 1); | |
| if (result != 1) { | |
| dev_err(dev, "%s error %d\n", "write", tmp); | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static const struct rtc_class_ops ds13xx_rtc_ops = { | |
| .read_time = ds1307_get_time, | |
| .set_time = ds1307_set_time, | |
| }; | |
| static struct i2c_driver ds1307_driver; | |
| static int __devinit ds1307_probe(struct i2c_client *client) | |
| { | |
| struct ds1307 *ds1307; | |
| int err = -ENODEV; | |
| int tmp; | |
| const struct chip_desc *chip; | |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); | |
| chip = find_chip(client->name); | |
| if (!chip) { | |
| dev_err(&client->dev, "unknown chip type '%s'\n", | |
| client->name); | |
| return -ENODEV; | |
| } | |
| if (!i2c_check_functionality(adapter, | |
| I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) | |
| return -EIO; | |
| if (!(ds1307 = kzalloc(sizeof(struct ds1307), GFP_KERNEL))) | |
| return -ENOMEM; | |
| ds1307->client = client; | |
| i2c_set_clientdata(client, ds1307); | |
| ds1307->msg[0].addr = client->addr; | |
| ds1307->msg[0].flags = 0; | |
| ds1307->msg[0].len = 1; | |
| ds1307->msg[0].buf = &ds1307->reg_addr; | |
| ds1307->msg[1].addr = client->addr; | |
| ds1307->msg[1].flags = I2C_M_RD; | |
| ds1307->msg[1].len = sizeof(ds1307->regs); | |
| ds1307->msg[1].buf = ds1307->regs; | |
| ds1307->type = chip->type; | |
| switch (ds1307->type) { | |
| case ds_1337: | |
| case ds_1339: | |
| ds1307->reg_addr = DS1337_REG_CONTROL; | |
| ds1307->msg[1].len = 2; | |
| /* get registers that the "rtc" read below won't read... */ | |
| tmp = i2c_transfer(adapter, ds1307->msg, 2); | |
| if (tmp != 2) { | |
| pr_debug("read error %d\n", tmp); | |
| err = -EIO; | |
| goto exit_free; | |
| } | |
| ds1307->reg_addr = 0; | |
| ds1307->msg[1].len = sizeof(ds1307->regs); | |
| /* oscillator off? turn it on, so clock can tick. */ | |
| if (ds1307->regs[0] & DS1337_BIT_nEOSC) | |
| i2c_smbus_write_byte_data(client, DS1337_REG_CONTROL, | |
| ds1307->regs[0] & ~DS1337_BIT_nEOSC); | |
| /* oscillator fault? clear flag, and warn */ | |
| if (ds1307->regs[1] & DS1337_BIT_OSF) { | |
| i2c_smbus_write_byte_data(client, DS1337_REG_STATUS, | |
| ds1307->regs[1] & ~DS1337_BIT_OSF); | |
| dev_warn(&client->dev, "SET TIME!\n"); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| read_rtc: | |
| /* read RTC registers */ | |
| tmp = i2c_transfer(adapter, ds1307->msg, 2); | |
| if (tmp != 2) { | |
| pr_debug("read error %d\n", tmp); | |
| err = -EIO; | |
| goto exit_free; | |
| } | |
| /* minimal sanity checking; some chips (like DS1340) don't | |
| * specify the extra bits as must-be-zero, but there are | |
| * still a few values that are clearly out-of-range. | |
| */ | |
| tmp = ds1307->regs[DS1307_REG_SECS]; | |
| switch (ds1307->type) { | |
| case ds_1340: | |
| /* FIXME read register with DS1340_BIT_OSF, use that to | |
| * trigger the "set time" warning (*after* restarting the | |
| * oscillator!) instead of this weaker ds1307/m41t00 test. | |
| */ | |
| case ds_1307: | |
| case m41t00: | |
| /* clock halted? turn it on, so clock can tick. */ | |
| if (tmp & DS1307_BIT_CH) { | |
| i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); | |
| dev_warn(&client->dev, "SET TIME!\n"); | |
| goto read_rtc; | |
| } | |
| break; | |
| case ds_1338: | |
| /* clock halted? turn it on, so clock can tick. */ | |
| if (tmp & DS1307_BIT_CH) | |
| i2c_smbus_write_byte_data(client, DS1307_REG_SECS, 0); | |
| /* oscillator fault? clear flag, and warn */ | |
| if (ds1307->regs[DS1307_REG_CONTROL] & DS1338_BIT_OSF) { | |
| i2c_smbus_write_byte_data(client, DS1307_REG_CONTROL, | |
| ds1307->regs[DS1307_REG_CONTROL] | |
| & ~DS1338_BIT_OSF); | |
| dev_warn(&client->dev, "SET TIME!\n"); | |
| goto read_rtc; | |
| } | |
| break; | |
| case ds_1337: | |
| case ds_1339: | |
| break; | |
| } | |
| tmp = ds1307->regs[DS1307_REG_SECS]; | |
| tmp = BCD2BIN(tmp & 0x7f); | |
| if (tmp > 60) | |
| goto exit_bad; | |
| tmp = BCD2BIN(ds1307->regs[DS1307_REG_MIN] & 0x7f); | |
| if (tmp > 60) | |
| goto exit_bad; | |
| tmp = BCD2BIN(ds1307->regs[DS1307_REG_MDAY] & 0x3f); | |
| if (tmp == 0 || tmp > 31) | |
| goto exit_bad; | |
| tmp = BCD2BIN(ds1307->regs[DS1307_REG_MONTH] & 0x1f); | |
| if (tmp == 0 || tmp > 12) | |
| goto exit_bad; | |
| tmp = ds1307->regs[DS1307_REG_HOUR]; | |
| switch (ds1307->type) { | |
| case ds_1340: | |
| case m41t00: | |
| /* NOTE: ignores century bits; fix before deploying | |
| * systems that will run through year 2100. | |
| */ | |
| break; | |
| default: | |
| if (!(tmp & DS1307_BIT_12HR)) | |
| break; | |
| /* Be sure we're in 24 hour mode. Multi-master systems | |
| * take note... | |
| */ | |
| tmp = BCD2BIN(tmp & 0x1f); | |
| if (tmp == 12) | |
| tmp = 0; | |
| if (ds1307->regs[DS1307_REG_HOUR] & DS1307_BIT_PM) | |
| tmp += 12; | |
| i2c_smbus_write_byte_data(client, | |
| DS1307_REG_HOUR, | |
| BIN2BCD(tmp)); | |
| } | |
| ds1307->rtc = rtc_device_register(client->name, &client->dev, | |
| &ds13xx_rtc_ops, THIS_MODULE); | |
| if (IS_ERR(ds1307->rtc)) { | |
| err = PTR_ERR(ds1307->rtc); | |
| dev_err(&client->dev, | |
| "unable to register the class device\n"); | |
| goto exit_free; | |
| } | |
| return 0; | |
| exit_bad: | |
| dev_dbg(&client->dev, "%s: %02x %02x %02x %02x %02x %02x %02x\n", | |
| "bogus register", | |
| ds1307->regs[0], ds1307->regs[1], | |
| ds1307->regs[2], ds1307->regs[3], | |
| ds1307->regs[4], ds1307->regs[5], | |
| ds1307->regs[6]); | |
| exit_free: | |
| kfree(ds1307); | |
| return err; | |
| } | |
| static int __devexit ds1307_remove(struct i2c_client *client) | |
| { | |
| struct ds1307 *ds1307 = i2c_get_clientdata(client); | |
| rtc_device_unregister(ds1307->rtc); | |
| kfree(ds1307); | |
| return 0; | |
| } | |
| static struct i2c_driver ds1307_driver = { | |
| .driver = { | |
| .name = "rtc-ds1307", | |
| .owner = THIS_MODULE, | |
| }, | |
| .probe = ds1307_probe, | |
| .remove = __devexit_p(ds1307_remove), | |
| }; | |
| static int __init ds1307_init(void) | |
| { | |
| return i2c_add_driver(&ds1307_driver); | |
| } | |
| module_init(ds1307_init); | |
| static void __exit ds1307_exit(void) | |
| { | |
| i2c_del_driver(&ds1307_driver); | |
| } | |
| module_exit(ds1307_exit); | |
| MODULE_DESCRIPTION("RTC driver for DS1307 and similar chips"); | |
| MODULE_LICENSE("GPL"); |