| /* | |
| * linux/mm/vmscan.c | |
| * | |
| * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds | |
| * | |
| * Swap reorganised 29.12.95, Stephen Tweedie. | |
| * kswapd added: 7.1.96 sct | |
| * Removed kswapd_ctl limits, and swap out as many pages as needed | |
| * to bring the system back to freepages.high: 2.4.97, Rik van Riel. | |
| * Zone aware kswapd started 02/00, Kanoj Sarcar (kanoj@sgi.com). | |
| * Multiqueue VM started 5.8.00, Rik van Riel. | |
| */ | |
| #include <linux/mm.h> | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/swap.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/init.h> | |
| #include <linux/highmem.h> | |
| #include <linux/vmstat.h> | |
| #include <linux/file.h> | |
| #include <linux/writeback.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/buffer_head.h> /* for try_to_release_page(), | |
| buffer_heads_over_limit */ | |
| #include <linux/mm_inline.h> | |
| #include <linux/pagevec.h> | |
| #include <linux/backing-dev.h> | |
| #include <linux/rmap.h> | |
| #include <linux/topology.h> | |
| #include <linux/cpu.h> | |
| #include <linux/cpuset.h> | |
| #include <linux/notifier.h> | |
| #include <linux/rwsem.h> | |
| #include <linux/delay.h> | |
| #include <linux/kthread.h> | |
| #include <linux/freezer.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/div64.h> | |
| #include <linux/swapops.h> | |
| #include "internal.h" | |
| struct scan_control { | |
| /* Incremented by the number of inactive pages that were scanned */ | |
| unsigned long nr_scanned; | |
| /* This context's GFP mask */ | |
| gfp_t gfp_mask; | |
| int may_writepage; | |
| /* Can pages be swapped as part of reclaim? */ | |
| int may_swap; | |
| /* This context's SWAP_CLUSTER_MAX. If freeing memory for | |
| * suspend, we effectively ignore SWAP_CLUSTER_MAX. | |
| * In this context, it doesn't matter that we scan the | |
| * whole list at once. */ | |
| int swap_cluster_max; | |
| int swappiness; | |
| int all_unreclaimable; | |
| int order; | |
| }; | |
| #define lru_to_page(_head) (list_entry((_head)->prev, struct page, lru)) | |
| #ifdef ARCH_HAS_PREFETCH | |
| #define prefetch_prev_lru_page(_page, _base, _field) \ | |
| do { \ | |
| if ((_page)->lru.prev != _base) { \ | |
| struct page *prev; \ | |
| \ | |
| prev = lru_to_page(&(_page->lru)); \ | |
| prefetch(&prev->_field); \ | |
| } \ | |
| } while (0) | |
| #else | |
| #define prefetch_prev_lru_page(_page, _base, _field) do { } while (0) | |
| #endif | |
| #ifdef ARCH_HAS_PREFETCHW | |
| #define prefetchw_prev_lru_page(_page, _base, _field) \ | |
| do { \ | |
| if ((_page)->lru.prev != _base) { \ | |
| struct page *prev; \ | |
| \ | |
| prev = lru_to_page(&(_page->lru)); \ | |
| prefetchw(&prev->_field); \ | |
| } \ | |
| } while (0) | |
| #else | |
| #define prefetchw_prev_lru_page(_page, _base, _field) do { } while (0) | |
| #endif | |
| /* | |
| * From 0 .. 100. Higher means more swappy. | |
| */ | |
| int vm_swappiness = 60; | |
| long vm_total_pages; /* The total number of pages which the VM controls */ | |
| static LIST_HEAD(shrinker_list); | |
| static DECLARE_RWSEM(shrinker_rwsem); | |
| /* | |
| * Add a shrinker callback to be called from the vm | |
| */ | |
| void register_shrinker(struct shrinker *shrinker) | |
| { | |
| shrinker->nr = 0; | |
| down_write(&shrinker_rwsem); | |
| list_add_tail(&shrinker->list, &shrinker_list); | |
| up_write(&shrinker_rwsem); | |
| } | |
| EXPORT_SYMBOL(register_shrinker); | |
| /* | |
| * Remove one | |
| */ | |
| void unregister_shrinker(struct shrinker *shrinker) | |
| { | |
| down_write(&shrinker_rwsem); | |
| list_del(&shrinker->list); | |
| up_write(&shrinker_rwsem); | |
| } | |
| EXPORT_SYMBOL(unregister_shrinker); | |
| #define SHRINK_BATCH 128 | |
| /* | |
| * Call the shrink functions to age shrinkable caches | |
| * | |
| * Here we assume it costs one seek to replace a lru page and that it also | |
| * takes a seek to recreate a cache object. With this in mind we age equal | |
| * percentages of the lru and ageable caches. This should balance the seeks | |
| * generated by these structures. | |
| * | |
| * If the vm encounted mapped pages on the LRU it increase the pressure on | |
| * slab to avoid swapping. | |
| * | |
| * We do weird things to avoid (scanned*seeks*entries) overflowing 32 bits. | |
| * | |
| * `lru_pages' represents the number of on-LRU pages in all the zones which | |
| * are eligible for the caller's allocation attempt. It is used for balancing | |
| * slab reclaim versus page reclaim. | |
| * | |
| * Returns the number of slab objects which we shrunk. | |
| */ | |
| unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask, | |
| unsigned long lru_pages) | |
| { | |
| struct shrinker *shrinker; | |
| unsigned long ret = 0; | |
| if (scanned == 0) | |
| scanned = SWAP_CLUSTER_MAX; | |
| if (!down_read_trylock(&shrinker_rwsem)) | |
| return 1; /* Assume we'll be able to shrink next time */ | |
| list_for_each_entry(shrinker, &shrinker_list, list) { | |
| unsigned long long delta; | |
| unsigned long total_scan; | |
| unsigned long max_pass = (*shrinker->shrink)(0, gfp_mask); | |
| delta = (4 * scanned) / shrinker->seeks; | |
| delta *= max_pass; | |
| do_div(delta, lru_pages + 1); | |
| shrinker->nr += delta; | |
| if (shrinker->nr < 0) { | |
| printk(KERN_ERR "%s: nr=%ld\n", | |
| __FUNCTION__, shrinker->nr); | |
| shrinker->nr = max_pass; | |
| } | |
| /* | |
| * Avoid risking looping forever due to too large nr value: | |
| * never try to free more than twice the estimate number of | |
| * freeable entries. | |
| */ | |
| if (shrinker->nr > max_pass * 2) | |
| shrinker->nr = max_pass * 2; | |
| total_scan = shrinker->nr; | |
| shrinker->nr = 0; | |
| while (total_scan >= SHRINK_BATCH) { | |
| long this_scan = SHRINK_BATCH; | |
| int shrink_ret; | |
| int nr_before; | |
| nr_before = (*shrinker->shrink)(0, gfp_mask); | |
| shrink_ret = (*shrinker->shrink)(this_scan, gfp_mask); | |
| if (shrink_ret == -1) | |
| break; | |
| if (shrink_ret < nr_before) | |
| ret += nr_before - shrink_ret; | |
| count_vm_events(SLABS_SCANNED, this_scan); | |
| total_scan -= this_scan; | |
| cond_resched(); | |
| } | |
| shrinker->nr += total_scan; | |
| } | |
| up_read(&shrinker_rwsem); | |
| return ret; | |
| } | |
| /* Called without lock on whether page is mapped, so answer is unstable */ | |
| static inline int page_mapping_inuse(struct page *page) | |
| { | |
| struct address_space *mapping; | |
| /* Page is in somebody's page tables. */ | |
| if (page_mapped(page)) | |
| return 1; | |
| /* Be more reluctant to reclaim swapcache than pagecache */ | |
| if (PageSwapCache(page)) | |
| return 1; | |
| mapping = page_mapping(page); | |
| if (!mapping) | |
| return 0; | |
| /* File is mmap'd by somebody? */ | |
| return mapping_mapped(mapping); | |
| } | |
| static inline int is_page_cache_freeable(struct page *page) | |
| { | |
| return page_count(page) - !!PagePrivate(page) == 2; | |
| } | |
| static int may_write_to_queue(struct backing_dev_info *bdi) | |
| { | |
| if (current->flags & PF_SWAPWRITE) | |
| return 1; | |
| if (!bdi_write_congested(bdi)) | |
| return 1; | |
| if (bdi == current->backing_dev_info) | |
| return 1; | |
| return 0; | |
| } | |
| /* | |
| * We detected a synchronous write error writing a page out. Probably | |
| * -ENOSPC. We need to propagate that into the address_space for a subsequent | |
| * fsync(), msync() or close(). | |
| * | |
| * The tricky part is that after writepage we cannot touch the mapping: nothing | |
| * prevents it from being freed up. But we have a ref on the page and once | |
| * that page is locked, the mapping is pinned. | |
| * | |
| * We're allowed to run sleeping lock_page() here because we know the caller has | |
| * __GFP_FS. | |
| */ | |
| static void handle_write_error(struct address_space *mapping, | |
| struct page *page, int error) | |
| { | |
| lock_page(page); | |
| if (page_mapping(page) == mapping) | |
| mapping_set_error(mapping, error); | |
| unlock_page(page); | |
| } | |
| /* Request for sync pageout. */ | |
| enum pageout_io { | |
| PAGEOUT_IO_ASYNC, | |
| PAGEOUT_IO_SYNC, | |
| }; | |
| /* possible outcome of pageout() */ | |
| typedef enum { | |
| /* failed to write page out, page is locked */ | |
| PAGE_KEEP, | |
| /* move page to the active list, page is locked */ | |
| PAGE_ACTIVATE, | |
| /* page has been sent to the disk successfully, page is unlocked */ | |
| PAGE_SUCCESS, | |
| /* page is clean and locked */ | |
| PAGE_CLEAN, | |
| } pageout_t; | |
| /* | |
| * pageout is called by shrink_page_list() for each dirty page. | |
| * Calls ->writepage(). | |
| */ | |
| static pageout_t pageout(struct page *page, struct address_space *mapping, | |
| enum pageout_io sync_writeback) | |
| { | |
| /* | |
| * If the page is dirty, only perform writeback if that write | |
| * will be non-blocking. To prevent this allocation from being | |
| * stalled by pagecache activity. But note that there may be | |
| * stalls if we need to run get_block(). We could test | |
| * PagePrivate for that. | |
| * | |
| * If this process is currently in generic_file_write() against | |
| * this page's queue, we can perform writeback even if that | |
| * will block. | |
| * | |
| * If the page is swapcache, write it back even if that would | |
| * block, for some throttling. This happens by accident, because | |
| * swap_backing_dev_info is bust: it doesn't reflect the | |
| * congestion state of the swapdevs. Easy to fix, if needed. | |
| * See swapfile.c:page_queue_congested(). | |
| */ | |
| if (!is_page_cache_freeable(page)) | |
| return PAGE_KEEP; | |
| if (!mapping) { | |
| /* | |
| * Some data journaling orphaned pages can have | |
| * page->mapping == NULL while being dirty with clean buffers. | |
| */ | |
| if (PagePrivate(page)) { | |
| if (try_to_free_buffers(page)) { | |
| ClearPageDirty(page); | |
| printk("%s: orphaned page\n", __FUNCTION__); | |
| return PAGE_CLEAN; | |
| } | |
| } | |
| return PAGE_KEEP; | |
| } | |
| if (mapping->a_ops->writepage == NULL) | |
| return PAGE_ACTIVATE; | |
| if (!may_write_to_queue(mapping->backing_dev_info)) | |
| return PAGE_KEEP; | |
| if (clear_page_dirty_for_io(page)) { | |
| int res; | |
| struct writeback_control wbc = { | |
| .sync_mode = WB_SYNC_NONE, | |
| .nr_to_write = SWAP_CLUSTER_MAX, | |
| .range_start = 0, | |
| .range_end = LLONG_MAX, | |
| .nonblocking = 1, | |
| .for_reclaim = 1, | |
| }; | |
| SetPageReclaim(page); | |
| res = mapping->a_ops->writepage(page, &wbc); | |
| if (res < 0) | |
| handle_write_error(mapping, page, res); | |
| if (res == AOP_WRITEPAGE_ACTIVATE) { | |
| ClearPageReclaim(page); | |
| return PAGE_ACTIVATE; | |
| } | |
| /* | |
| * Wait on writeback if requested to. This happens when | |
| * direct reclaiming a large contiguous area and the | |
| * first attempt to free a range of pages fails. | |
| */ | |
| if (PageWriteback(page) && sync_writeback == PAGEOUT_IO_SYNC) | |
| wait_on_page_writeback(page); | |
| if (!PageWriteback(page)) { | |
| /* synchronous write or broken a_ops? */ | |
| ClearPageReclaim(page); | |
| } | |
| inc_zone_page_state(page, NR_VMSCAN_WRITE); | |
| return PAGE_SUCCESS; | |
| } | |
| return PAGE_CLEAN; | |
| } | |
| /* | |
| * Attempt to detach a locked page from its ->mapping. If it is dirty or if | |
| * someone else has a ref on the page, abort and return 0. If it was | |
| * successfully detached, return 1. Assumes the caller has a single ref on | |
| * this page. | |
| */ | |
| int remove_mapping(struct address_space *mapping, struct page *page) | |
| { | |
| BUG_ON(!PageLocked(page)); | |
| BUG_ON(mapping != page_mapping(page)); | |
| write_lock_irq(&mapping->tree_lock); | |
| /* | |
| * The non racy check for a busy page. | |
| * | |
| * Must be careful with the order of the tests. When someone has | |
| * a ref to the page, it may be possible that they dirty it then | |
| * drop the reference. So if PageDirty is tested before page_count | |
| * here, then the following race may occur: | |
| * | |
| * get_user_pages(&page); | |
| * [user mapping goes away] | |
| * write_to(page); | |
| * !PageDirty(page) [good] | |
| * SetPageDirty(page); | |
| * put_page(page); | |
| * !page_count(page) [good, discard it] | |
| * | |
| * [oops, our write_to data is lost] | |
| * | |
| * Reversing the order of the tests ensures such a situation cannot | |
| * escape unnoticed. The smp_rmb is needed to ensure the page->flags | |
| * load is not satisfied before that of page->_count. | |
| * | |
| * Note that if SetPageDirty is always performed via set_page_dirty, | |
| * and thus under tree_lock, then this ordering is not required. | |
| */ | |
| if (unlikely(page_count(page) != 2)) | |
| goto cannot_free; | |
| smp_rmb(); | |
| if (unlikely(PageDirty(page))) | |
| goto cannot_free; | |
| if (PageSwapCache(page)) { | |
| swp_entry_t swap = { .val = page_private(page) }; | |
| __delete_from_swap_cache(page); | |
| write_unlock_irq(&mapping->tree_lock); | |
| swap_free(swap); | |
| __put_page(page); /* The pagecache ref */ | |
| return 1; | |
| } | |
| __remove_from_page_cache(page); | |
| write_unlock_irq(&mapping->tree_lock); | |
| __put_page(page); | |
| return 1; | |
| cannot_free: | |
| write_unlock_irq(&mapping->tree_lock); | |
| return 0; | |
| } | |
| /* | |
| * shrink_page_list() returns the number of reclaimed pages | |
| */ | |
| static unsigned long shrink_page_list(struct list_head *page_list, | |
| struct scan_control *sc, | |
| enum pageout_io sync_writeback) | |
| { | |
| LIST_HEAD(ret_pages); | |
| struct pagevec freed_pvec; | |
| int pgactivate = 0; | |
| unsigned long nr_reclaimed = 0; | |
| cond_resched(); | |
| pagevec_init(&freed_pvec, 1); | |
| while (!list_empty(page_list)) { | |
| struct address_space *mapping; | |
| struct page *page; | |
| int may_enter_fs; | |
| int referenced; | |
| cond_resched(); | |
| page = lru_to_page(page_list); | |
| list_del(&page->lru); | |
| if (TestSetPageLocked(page)) | |
| goto keep; | |
| VM_BUG_ON(PageActive(page)); | |
| sc->nr_scanned++; | |
| if (!sc->may_swap && page_mapped(page)) | |
| goto keep_locked; | |
| /* Double the slab pressure for mapped and swapcache pages */ | |
| if (page_mapped(page) || PageSwapCache(page)) | |
| sc->nr_scanned++; | |
| may_enter_fs = (sc->gfp_mask & __GFP_FS) || | |
| (PageSwapCache(page) && (sc->gfp_mask & __GFP_IO)); | |
| if (PageWriteback(page)) { | |
| /* | |
| * Synchronous reclaim is performed in two passes, | |
| * first an asynchronous pass over the list to | |
| * start parallel writeback, and a second synchronous | |
| * pass to wait for the IO to complete. Wait here | |
| * for any page for which writeback has already | |
| * started. | |
| */ | |
| if (sync_writeback == PAGEOUT_IO_SYNC && may_enter_fs) | |
| wait_on_page_writeback(page); | |
| else | |
| goto keep_locked; | |
| } | |
| referenced = page_referenced(page, 1); | |
| /* In active use or really unfreeable? Activate it. */ | |
| if (sc->order <= PAGE_ALLOC_COSTLY_ORDER && | |
| referenced && page_mapping_inuse(page)) | |
| goto activate_locked; | |
| #ifdef CONFIG_SWAP | |
| /* | |
| * Anonymous process memory has backing store? | |
| * Try to allocate it some swap space here. | |
| */ | |
| if (PageAnon(page) && !PageSwapCache(page)) | |
| if (!add_to_swap(page, GFP_ATOMIC)) | |
| goto activate_locked; | |
| #endif /* CONFIG_SWAP */ | |
| mapping = page_mapping(page); | |
| /* | |
| * The page is mapped into the page tables of one or more | |
| * processes. Try to unmap it here. | |
| */ | |
| if (page_mapped(page) && mapping) { | |
| switch (try_to_unmap(page, 0)) { | |
| case SWAP_FAIL: | |
| goto activate_locked; | |
| case SWAP_AGAIN: | |
| goto keep_locked; | |
| case SWAP_SUCCESS: | |
| ; /* try to free the page below */ | |
| } | |
| } | |
| if (PageDirty(page)) { | |
| if (sc->order <= PAGE_ALLOC_COSTLY_ORDER && referenced) | |
| goto keep_locked; | |
| if (!may_enter_fs) | |
| goto keep_locked; | |
| if (!sc->may_writepage) | |
| goto keep_locked; | |
| /* Page is dirty, try to write it out here */ | |
| switch (pageout(page, mapping, sync_writeback)) { | |
| case PAGE_KEEP: | |
| goto keep_locked; | |
| case PAGE_ACTIVATE: | |
| goto activate_locked; | |
| case PAGE_SUCCESS: | |
| if (PageWriteback(page) || PageDirty(page)) | |
| goto keep; | |
| /* | |
| * A synchronous write - probably a ramdisk. Go | |
| * ahead and try to reclaim the page. | |
| */ | |
| if (TestSetPageLocked(page)) | |
| goto keep; | |
| if (PageDirty(page) || PageWriteback(page)) | |
| goto keep_locked; | |
| mapping = page_mapping(page); | |
| case PAGE_CLEAN: | |
| ; /* try to free the page below */ | |
| } | |
| } | |
| /* | |
| * If the page has buffers, try to free the buffer mappings | |
| * associated with this page. If we succeed we try to free | |
| * the page as well. | |
| * | |
| * We do this even if the page is PageDirty(). | |
| * try_to_release_page() does not perform I/O, but it is | |
| * possible for a page to have PageDirty set, but it is actually | |
| * clean (all its buffers are clean). This happens if the | |
| * buffers were written out directly, with submit_bh(). ext3 | |
| * will do this, as well as the blockdev mapping. | |
| * try_to_release_page() will discover that cleanness and will | |
| * drop the buffers and mark the page clean - it can be freed. | |
| * | |
| * Rarely, pages can have buffers and no ->mapping. These are | |
| * the pages which were not successfully invalidated in | |
| * truncate_complete_page(). We try to drop those buffers here | |
| * and if that worked, and the page is no longer mapped into | |
| * process address space (page_count == 1) it can be freed. | |
| * Otherwise, leave the page on the LRU so it is swappable. | |
| */ | |
| if (PagePrivate(page)) { | |
| if (!try_to_release_page(page, sc->gfp_mask)) | |
| goto activate_locked; | |
| if (!mapping && page_count(page) == 1) | |
| goto free_it; | |
| } | |
| if (!mapping || !remove_mapping(mapping, page)) | |
| goto keep_locked; | |
| free_it: | |
| unlock_page(page); | |
| nr_reclaimed++; | |
| if (!pagevec_add(&freed_pvec, page)) | |
| __pagevec_release_nonlru(&freed_pvec); | |
| continue; | |
| activate_locked: | |
| SetPageActive(page); | |
| pgactivate++; | |
| keep_locked: | |
| unlock_page(page); | |
| keep: | |
| list_add(&page->lru, &ret_pages); | |
| VM_BUG_ON(PageLRU(page)); | |
| } | |
| list_splice(&ret_pages, page_list); | |
| if (pagevec_count(&freed_pvec)) | |
| __pagevec_release_nonlru(&freed_pvec); | |
| count_vm_events(PGACTIVATE, pgactivate); | |
| return nr_reclaimed; | |
| } | |
| /* LRU Isolation modes. */ | |
| #define ISOLATE_INACTIVE 0 /* Isolate inactive pages. */ | |
| #define ISOLATE_ACTIVE 1 /* Isolate active pages. */ | |
| #define ISOLATE_BOTH 2 /* Isolate both active and inactive pages. */ | |
| /* | |
| * Attempt to remove the specified page from its LRU. Only take this page | |
| * if it is of the appropriate PageActive status. Pages which are being | |
| * freed elsewhere are also ignored. | |
| * | |
| * page: page to consider | |
| * mode: one of the LRU isolation modes defined above | |
| * | |
| * returns 0 on success, -ve errno on failure. | |
| */ | |
| static int __isolate_lru_page(struct page *page, int mode) | |
| { | |
| int ret = -EINVAL; | |
| /* Only take pages on the LRU. */ | |
| if (!PageLRU(page)) | |
| return ret; | |
| /* | |
| * When checking the active state, we need to be sure we are | |
| * dealing with comparible boolean values. Take the logical not | |
| * of each. | |
| */ | |
| if (mode != ISOLATE_BOTH && (!PageActive(page) != !mode)) | |
| return ret; | |
| ret = -EBUSY; | |
| if (likely(get_page_unless_zero(page))) { | |
| /* | |
| * Be careful not to clear PageLRU until after we're | |
| * sure the page is not being freed elsewhere -- the | |
| * page release code relies on it. | |
| */ | |
| ClearPageLRU(page); | |
| ret = 0; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * zone->lru_lock is heavily contended. Some of the functions that | |
| * shrink the lists perform better by taking out a batch of pages | |
| * and working on them outside the LRU lock. | |
| * | |
| * For pagecache intensive workloads, this function is the hottest | |
| * spot in the kernel (apart from copy_*_user functions). | |
| * | |
| * Appropriate locks must be held before calling this function. | |
| * | |
| * @nr_to_scan: The number of pages to look through on the list. | |
| * @src: The LRU list to pull pages off. | |
| * @dst: The temp list to put pages on to. | |
| * @scanned: The number of pages that were scanned. | |
| * @order: The caller's attempted allocation order | |
| * @mode: One of the LRU isolation modes | |
| * | |
| * returns how many pages were moved onto *@dst. | |
| */ | |
| static unsigned long isolate_lru_pages(unsigned long nr_to_scan, | |
| struct list_head *src, struct list_head *dst, | |
| unsigned long *scanned, int order, int mode) | |
| { | |
| unsigned long nr_taken = 0; | |
| unsigned long scan; | |
| for (scan = 0; scan < nr_to_scan && !list_empty(src); scan++) { | |
| struct page *page; | |
| unsigned long pfn; | |
| unsigned long end_pfn; | |
| unsigned long page_pfn; | |
| int zone_id; | |
| page = lru_to_page(src); | |
| prefetchw_prev_lru_page(page, src, flags); | |
| VM_BUG_ON(!PageLRU(page)); | |
| switch (__isolate_lru_page(page, mode)) { | |
| case 0: | |
| list_move(&page->lru, dst); | |
| nr_taken++; | |
| break; | |
| case -EBUSY: | |
| /* else it is being freed elsewhere */ | |
| list_move(&page->lru, src); | |
| continue; | |
| default: | |
| BUG(); | |
| } | |
| if (!order) | |
| continue; | |
| /* | |
| * Attempt to take all pages in the order aligned region | |
| * surrounding the tag page. Only take those pages of | |
| * the same active state as that tag page. We may safely | |
| * round the target page pfn down to the requested order | |
| * as the mem_map is guarenteed valid out to MAX_ORDER, | |
| * where that page is in a different zone we will detect | |
| * it from its zone id and abort this block scan. | |
| */ | |
| zone_id = page_zone_id(page); | |
| page_pfn = page_to_pfn(page); | |
| pfn = page_pfn & ~((1 << order) - 1); | |
| end_pfn = pfn + (1 << order); | |
| for (; pfn < end_pfn; pfn++) { | |
| struct page *cursor_page; | |
| /* The target page is in the block, ignore it. */ | |
| if (unlikely(pfn == page_pfn)) | |
| continue; | |
| /* Avoid holes within the zone. */ | |
| if (unlikely(!pfn_valid_within(pfn))) | |
| break; | |
| cursor_page = pfn_to_page(pfn); | |
| /* Check that we have not crossed a zone boundary. */ | |
| if (unlikely(page_zone_id(cursor_page) != zone_id)) | |
| continue; | |
| switch (__isolate_lru_page(cursor_page, mode)) { | |
| case 0: | |
| list_move(&cursor_page->lru, dst); | |
| nr_taken++; | |
| scan++; | |
| break; | |
| case -EBUSY: | |
| /* else it is being freed elsewhere */ | |
| list_move(&cursor_page->lru, src); | |
| default: | |
| break; | |
| } | |
| } | |
| } | |
| *scanned = scan; | |
| return nr_taken; | |
| } | |
| /* | |
| * clear_active_flags() is a helper for shrink_active_list(), clearing | |
| * any active bits from the pages in the list. | |
| */ | |
| static unsigned long clear_active_flags(struct list_head *page_list) | |
| { | |
| int nr_active = 0; | |
| struct page *page; | |
| list_for_each_entry(page, page_list, lru) | |
| if (PageActive(page)) { | |
| ClearPageActive(page); | |
| nr_active++; | |
| } | |
| return nr_active; | |
| } | |
| /* | |
| * shrink_inactive_list() is a helper for shrink_zone(). It returns the number | |
| * of reclaimed pages | |
| */ | |
| static unsigned long shrink_inactive_list(unsigned long max_scan, | |
| struct zone *zone, struct scan_control *sc) | |
| { | |
| LIST_HEAD(page_list); | |
| struct pagevec pvec; | |
| unsigned long nr_scanned = 0; | |
| unsigned long nr_reclaimed = 0; | |
| pagevec_init(&pvec, 1); | |
| lru_add_drain(); | |
| spin_lock_irq(&zone->lru_lock); | |
| do { | |
| struct page *page; | |
| unsigned long nr_taken; | |
| unsigned long nr_scan; | |
| unsigned long nr_freed; | |
| unsigned long nr_active; | |
| nr_taken = isolate_lru_pages(sc->swap_cluster_max, | |
| &zone->inactive_list, | |
| &page_list, &nr_scan, sc->order, | |
| (sc->order > PAGE_ALLOC_COSTLY_ORDER)? | |
| ISOLATE_BOTH : ISOLATE_INACTIVE); | |
| nr_active = clear_active_flags(&page_list); | |
| __count_vm_events(PGDEACTIVATE, nr_active); | |
| __mod_zone_page_state(zone, NR_ACTIVE, -nr_active); | |
| __mod_zone_page_state(zone, NR_INACTIVE, | |
| -(nr_taken - nr_active)); | |
| zone->pages_scanned += nr_scan; | |
| spin_unlock_irq(&zone->lru_lock); | |
| nr_scanned += nr_scan; | |
| nr_freed = shrink_page_list(&page_list, sc, PAGEOUT_IO_ASYNC); | |
| /* | |
| * If we are direct reclaiming for contiguous pages and we do | |
| * not reclaim everything in the list, try again and wait | |
| * for IO to complete. This will stall high-order allocations | |
| * but that should be acceptable to the caller | |
| */ | |
| if (nr_freed < nr_taken && !current_is_kswapd() && | |
| sc->order > PAGE_ALLOC_COSTLY_ORDER) { | |
| congestion_wait(WRITE, HZ/10); | |
| /* | |
| * The attempt at page out may have made some | |
| * of the pages active, mark them inactive again. | |
| */ | |
| nr_active = clear_active_flags(&page_list); | |
| count_vm_events(PGDEACTIVATE, nr_active); | |
| nr_freed += shrink_page_list(&page_list, sc, | |
| PAGEOUT_IO_SYNC); | |
| } | |
| nr_reclaimed += nr_freed; | |
| local_irq_disable(); | |
| if (current_is_kswapd()) { | |
| __count_zone_vm_events(PGSCAN_KSWAPD, zone, nr_scan); | |
| __count_vm_events(KSWAPD_STEAL, nr_freed); | |
| } else | |
| __count_zone_vm_events(PGSCAN_DIRECT, zone, nr_scan); | |
| __count_zone_vm_events(PGSTEAL, zone, nr_freed); | |
| if (nr_taken == 0) | |
| goto done; | |
| spin_lock(&zone->lru_lock); | |
| /* | |
| * Put back any unfreeable pages. | |
| */ | |
| while (!list_empty(&page_list)) { | |
| page = lru_to_page(&page_list); | |
| VM_BUG_ON(PageLRU(page)); | |
| SetPageLRU(page); | |
| list_del(&page->lru); | |
| if (PageActive(page)) | |
| add_page_to_active_list(zone, page); | |
| else | |
| add_page_to_inactive_list(zone, page); | |
| if (!pagevec_add(&pvec, page)) { | |
| spin_unlock_irq(&zone->lru_lock); | |
| __pagevec_release(&pvec); | |
| spin_lock_irq(&zone->lru_lock); | |
| } | |
| } | |
| } while (nr_scanned < max_scan); | |
| spin_unlock(&zone->lru_lock); | |
| done: | |
| local_irq_enable(); | |
| pagevec_release(&pvec); | |
| return nr_reclaimed; | |
| } | |
| /* | |
| * We are about to scan this zone at a certain priority level. If that priority | |
| * level is smaller (ie: more urgent) than the previous priority, then note | |
| * that priority level within the zone. This is done so that when the next | |
| * process comes in to scan this zone, it will immediately start out at this | |
| * priority level rather than having to build up its own scanning priority. | |
| * Here, this priority affects only the reclaim-mapped threshold. | |
| */ | |
| static inline void note_zone_scanning_priority(struct zone *zone, int priority) | |
| { | |
| if (priority < zone->prev_priority) | |
| zone->prev_priority = priority; | |
| } | |
| static inline int zone_is_near_oom(struct zone *zone) | |
| { | |
| return zone->pages_scanned >= (zone_page_state(zone, NR_ACTIVE) | |
| + zone_page_state(zone, NR_INACTIVE))*3; | |
| } | |
| /* | |
| * This moves pages from the active list to the inactive list. | |
| * | |
| * We move them the other way if the page is referenced by one or more | |
| * processes, from rmap. | |
| * | |
| * If the pages are mostly unmapped, the processing is fast and it is | |
| * appropriate to hold zone->lru_lock across the whole operation. But if | |
| * the pages are mapped, the processing is slow (page_referenced()) so we | |
| * should drop zone->lru_lock around each page. It's impossible to balance | |
| * this, so instead we remove the pages from the LRU while processing them. | |
| * It is safe to rely on PG_active against the non-LRU pages in here because | |
| * nobody will play with that bit on a non-LRU page. | |
| * | |
| * The downside is that we have to touch page->_count against each page. | |
| * But we had to alter page->flags anyway. | |
| */ | |
| static void shrink_active_list(unsigned long nr_pages, struct zone *zone, | |
| struct scan_control *sc, int priority) | |
| { | |
| unsigned long pgmoved; | |
| int pgdeactivate = 0; | |
| unsigned long pgscanned; | |
| LIST_HEAD(l_hold); /* The pages which were snipped off */ | |
| LIST_HEAD(l_inactive); /* Pages to go onto the inactive_list */ | |
| LIST_HEAD(l_active); /* Pages to go onto the active_list */ | |
| struct page *page; | |
| struct pagevec pvec; | |
| int reclaim_mapped = 0; | |
| if (sc->may_swap) { | |
| long mapped_ratio; | |
| long distress; | |
| long swap_tendency; | |
| if (zone_is_near_oom(zone)) | |
| goto force_reclaim_mapped; | |
| /* | |
| * `distress' is a measure of how much trouble we're having | |
| * reclaiming pages. 0 -> no problems. 100 -> great trouble. | |
| */ | |
| distress = 100 >> min(zone->prev_priority, priority); | |
| /* | |
| * The point of this algorithm is to decide when to start | |
| * reclaiming mapped memory instead of just pagecache. Work out | |
| * how much memory | |
| * is mapped. | |
| */ | |
| mapped_ratio = ((global_page_state(NR_FILE_MAPPED) + | |
| global_page_state(NR_ANON_PAGES)) * 100) / | |
| vm_total_pages; | |
| /* | |
| * Now decide how much we really want to unmap some pages. The | |
| * mapped ratio is downgraded - just because there's a lot of | |
| * mapped memory doesn't necessarily mean that page reclaim | |
| * isn't succeeding. | |
| * | |
| * The distress ratio is important - we don't want to start | |
| * going oom. | |
| * | |
| * A 100% value of vm_swappiness overrides this algorithm | |
| * altogether. | |
| */ | |
| swap_tendency = mapped_ratio / 2 + distress + sc->swappiness; | |
| /* | |
| * Now use this metric to decide whether to start moving mapped | |
| * memory onto the inactive list. | |
| */ | |
| if (swap_tendency >= 100) | |
| force_reclaim_mapped: | |
| reclaim_mapped = 1; | |
| } | |
| lru_add_drain(); | |
| spin_lock_irq(&zone->lru_lock); | |
| pgmoved = isolate_lru_pages(nr_pages, &zone->active_list, | |
| &l_hold, &pgscanned, sc->order, ISOLATE_ACTIVE); | |
| zone->pages_scanned += pgscanned; | |
| __mod_zone_page_state(zone, NR_ACTIVE, -pgmoved); | |
| spin_unlock_irq(&zone->lru_lock); | |
| while (!list_empty(&l_hold)) { | |
| cond_resched(); | |
| page = lru_to_page(&l_hold); | |
| list_del(&page->lru); | |
| if (page_mapped(page)) { | |
| if (!reclaim_mapped || | |
| (total_swap_pages == 0 && PageAnon(page)) || | |
| page_referenced(page, 0)) { | |
| list_add(&page->lru, &l_active); | |
| continue; | |
| } | |
| } | |
| list_add(&page->lru, &l_inactive); | |
| } | |
| pagevec_init(&pvec, 1); | |
| pgmoved = 0; | |
| spin_lock_irq(&zone->lru_lock); | |
| while (!list_empty(&l_inactive)) { | |
| page = lru_to_page(&l_inactive); | |
| prefetchw_prev_lru_page(page, &l_inactive, flags); | |
| VM_BUG_ON(PageLRU(page)); | |
| SetPageLRU(page); | |
| VM_BUG_ON(!PageActive(page)); | |
| ClearPageActive(page); | |
| list_move(&page->lru, &zone->inactive_list); | |
| pgmoved++; | |
| if (!pagevec_add(&pvec, page)) { | |
| __mod_zone_page_state(zone, NR_INACTIVE, pgmoved); | |
| spin_unlock_irq(&zone->lru_lock); | |
| pgdeactivate += pgmoved; | |
| pgmoved = 0; | |
| if (buffer_heads_over_limit) | |
| pagevec_strip(&pvec); | |
| __pagevec_release(&pvec); | |
| spin_lock_irq(&zone->lru_lock); | |
| } | |
| } | |
| __mod_zone_page_state(zone, NR_INACTIVE, pgmoved); | |
| pgdeactivate += pgmoved; | |
| if (buffer_heads_over_limit) { | |
| spin_unlock_irq(&zone->lru_lock); | |
| pagevec_strip(&pvec); | |
| spin_lock_irq(&zone->lru_lock); | |
| } | |
| pgmoved = 0; | |
| while (!list_empty(&l_active)) { | |
| page = lru_to_page(&l_active); | |
| prefetchw_prev_lru_page(page, &l_active, flags); | |
| VM_BUG_ON(PageLRU(page)); | |
| SetPageLRU(page); | |
| VM_BUG_ON(!PageActive(page)); | |
| list_move(&page->lru, &zone->active_list); | |
| pgmoved++; | |
| if (!pagevec_add(&pvec, page)) { | |
| __mod_zone_page_state(zone, NR_ACTIVE, pgmoved); | |
| pgmoved = 0; | |
| spin_unlock_irq(&zone->lru_lock); | |
| __pagevec_release(&pvec); | |
| spin_lock_irq(&zone->lru_lock); | |
| } | |
| } | |
| __mod_zone_page_state(zone, NR_ACTIVE, pgmoved); | |
| __count_zone_vm_events(PGREFILL, zone, pgscanned); | |
| __count_vm_events(PGDEACTIVATE, pgdeactivate); | |
| spin_unlock_irq(&zone->lru_lock); | |
| pagevec_release(&pvec); | |
| } | |
| /* | |
| * This is a basic per-zone page freer. Used by both kswapd and direct reclaim. | |
| */ | |
| static unsigned long shrink_zone(int priority, struct zone *zone, | |
| struct scan_control *sc) | |
| { | |
| unsigned long nr_active; | |
| unsigned long nr_inactive; | |
| unsigned long nr_to_scan; | |
| unsigned long nr_reclaimed = 0; | |
| atomic_inc(&zone->reclaim_in_progress); | |
| /* | |
| * Add one to `nr_to_scan' just to make sure that the kernel will | |
| * slowly sift through the active list. | |
| */ | |
| zone->nr_scan_active += | |
| (zone_page_state(zone, NR_ACTIVE) >> priority) + 1; | |
| nr_active = zone->nr_scan_active; | |
| if (nr_active >= sc->swap_cluster_max) | |
| zone->nr_scan_active = 0; | |
| else | |
| nr_active = 0; | |
| zone->nr_scan_inactive += | |
| (zone_page_state(zone, NR_INACTIVE) >> priority) + 1; | |
| nr_inactive = zone->nr_scan_inactive; | |
| if (nr_inactive >= sc->swap_cluster_max) | |
| zone->nr_scan_inactive = 0; | |
| else | |
| nr_inactive = 0; | |
| while (nr_active || nr_inactive) { | |
| if (nr_active) { | |
| nr_to_scan = min(nr_active, | |
| (unsigned long)sc->swap_cluster_max); | |
| nr_active -= nr_to_scan; | |
| shrink_active_list(nr_to_scan, zone, sc, priority); | |
| } | |
| if (nr_inactive) { | |
| nr_to_scan = min(nr_inactive, | |
| (unsigned long)sc->swap_cluster_max); | |
| nr_inactive -= nr_to_scan; | |
| nr_reclaimed += shrink_inactive_list(nr_to_scan, zone, | |
| sc); | |
| } | |
| } | |
| throttle_vm_writeout(sc->gfp_mask); | |
| atomic_dec(&zone->reclaim_in_progress); | |
| return nr_reclaimed; | |
| } | |
| /* | |
| * This is the direct reclaim path, for page-allocating processes. We only | |
| * try to reclaim pages from zones which will satisfy the caller's allocation | |
| * request. | |
| * | |
| * We reclaim from a zone even if that zone is over pages_high. Because: | |
| * a) The caller may be trying to free *extra* pages to satisfy a higher-order | |
| * allocation or | |
| * b) The zones may be over pages_high but they must go *over* pages_high to | |
| * satisfy the `incremental min' zone defense algorithm. | |
| * | |
| * Returns the number of reclaimed pages. | |
| * | |
| * If a zone is deemed to be full of pinned pages then just give it a light | |
| * scan then give up on it. | |
| */ | |
| static unsigned long shrink_zones(int priority, struct zone **zones, | |
| struct scan_control *sc) | |
| { | |
| unsigned long nr_reclaimed = 0; | |
| int i; | |
| sc->all_unreclaimable = 1; | |
| for (i = 0; zones[i] != NULL; i++) { | |
| struct zone *zone = zones[i]; | |
| if (!populated_zone(zone)) | |
| continue; | |
| if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL)) | |
| continue; | |
| note_zone_scanning_priority(zone, priority); | |
| if (zone->all_unreclaimable && priority != DEF_PRIORITY) | |
| continue; /* Let kswapd poll it */ | |
| sc->all_unreclaimable = 0; | |
| nr_reclaimed += shrink_zone(priority, zone, sc); | |
| } | |
| return nr_reclaimed; | |
| } | |
| /* | |
| * This is the main entry point to direct page reclaim. | |
| * | |
| * If a full scan of the inactive list fails to free enough memory then we | |
| * are "out of memory" and something needs to be killed. | |
| * | |
| * If the caller is !__GFP_FS then the probability of a failure is reasonably | |
| * high - the zone may be full of dirty or under-writeback pages, which this | |
| * caller can't do much about. We kick pdflush and take explicit naps in the | |
| * hope that some of these pages can be written. But if the allocating task | |
| * holds filesystem locks which prevent writeout this might not work, and the | |
| * allocation attempt will fail. | |
| */ | |
| unsigned long try_to_free_pages(struct zone **zones, int order, gfp_t gfp_mask) | |
| { | |
| int priority; | |
| int ret = 0; | |
| unsigned long total_scanned = 0; | |
| unsigned long nr_reclaimed = 0; | |
| struct reclaim_state *reclaim_state = current->reclaim_state; | |
| unsigned long lru_pages = 0; | |
| int i; | |
| struct scan_control sc = { | |
| .gfp_mask = gfp_mask, | |
| .may_writepage = !laptop_mode, | |
| .swap_cluster_max = SWAP_CLUSTER_MAX, | |
| .may_swap = 1, | |
| .swappiness = vm_swappiness, | |
| .order = order, | |
| }; | |
| count_vm_event(ALLOCSTALL); | |
| for (i = 0; zones[i] != NULL; i++) { | |
| struct zone *zone = zones[i]; | |
| if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL)) | |
| continue; | |
| lru_pages += zone_page_state(zone, NR_ACTIVE) | |
| + zone_page_state(zone, NR_INACTIVE); | |
| } | |
| for (priority = DEF_PRIORITY; priority >= 0; priority--) { | |
| sc.nr_scanned = 0; | |
| if (!priority) | |
| disable_swap_token(); | |
| nr_reclaimed += shrink_zones(priority, zones, &sc); | |
| shrink_slab(sc.nr_scanned, gfp_mask, lru_pages); | |
| if (reclaim_state) { | |
| nr_reclaimed += reclaim_state->reclaimed_slab; | |
| reclaim_state->reclaimed_slab = 0; | |
| } | |
| total_scanned += sc.nr_scanned; | |
| if (nr_reclaimed >= sc.swap_cluster_max) { | |
| ret = 1; | |
| goto out; | |
| } | |
| /* | |
| * Try to write back as many pages as we just scanned. This | |
| * tends to cause slow streaming writers to write data to the | |
| * disk smoothly, at the dirtying rate, which is nice. But | |
| * that's undesirable in laptop mode, where we *want* lumpy | |
| * writeout. So in laptop mode, write out the whole world. | |
| */ | |
| if (total_scanned > sc.swap_cluster_max + | |
| sc.swap_cluster_max / 2) { | |
| wakeup_pdflush(laptop_mode ? 0 : total_scanned); | |
| sc.may_writepage = 1; | |
| } | |
| /* Take a nap, wait for some writeback to complete */ | |
| if (sc.nr_scanned && priority < DEF_PRIORITY - 2) | |
| congestion_wait(WRITE, HZ/10); | |
| } | |
| /* top priority shrink_caches still had more to do? don't OOM, then */ | |
| if (!sc.all_unreclaimable) | |
| ret = 1; | |
| out: | |
| /* | |
| * Now that we've scanned all the zones at this priority level, note | |
| * that level within the zone so that the next thread which performs | |
| * scanning of this zone will immediately start out at this priority | |
| * level. This affects only the decision whether or not to bring | |
| * mapped pages onto the inactive list. | |
| */ | |
| if (priority < 0) | |
| priority = 0; | |
| for (i = 0; zones[i] != 0; i++) { | |
| struct zone *zone = zones[i]; | |
| if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL)) | |
| continue; | |
| zone->prev_priority = priority; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * For kswapd, balance_pgdat() will work across all this node's zones until | |
| * they are all at pages_high. | |
| * | |
| * Returns the number of pages which were actually freed. | |
| * | |
| * There is special handling here for zones which are full of pinned pages. | |
| * This can happen if the pages are all mlocked, or if they are all used by | |
| * device drivers (say, ZONE_DMA). Or if they are all in use by hugetlb. | |
| * What we do is to detect the case where all pages in the zone have been | |
| * scanned twice and there has been zero successful reclaim. Mark the zone as | |
| * dead and from now on, only perform a short scan. Basically we're polling | |
| * the zone for when the problem goes away. | |
| * | |
| * kswapd scans the zones in the highmem->normal->dma direction. It skips | |
| * zones which have free_pages > pages_high, but once a zone is found to have | |
| * free_pages <= pages_high, we scan that zone and the lower zones regardless | |
| * of the number of free pages in the lower zones. This interoperates with | |
| * the page allocator fallback scheme to ensure that aging of pages is balanced | |
| * across the zones. | |
| */ | |
| static unsigned long balance_pgdat(pg_data_t *pgdat, int order) | |
| { | |
| int all_zones_ok; | |
| int priority; | |
| int i; | |
| unsigned long total_scanned; | |
| unsigned long nr_reclaimed; | |
| struct reclaim_state *reclaim_state = current->reclaim_state; | |
| struct scan_control sc = { | |
| .gfp_mask = GFP_KERNEL, | |
| .may_swap = 1, | |
| .swap_cluster_max = SWAP_CLUSTER_MAX, | |
| .swappiness = vm_swappiness, | |
| .order = order, | |
| }; | |
| /* | |
| * temp_priority is used to remember the scanning priority at which | |
| * this zone was successfully refilled to free_pages == pages_high. | |
| */ | |
| int temp_priority[MAX_NR_ZONES]; | |
| loop_again: | |
| total_scanned = 0; | |
| nr_reclaimed = 0; | |
| sc.may_writepage = !laptop_mode; | |
| count_vm_event(PAGEOUTRUN); | |
| for (i = 0; i < pgdat->nr_zones; i++) | |
| temp_priority[i] = DEF_PRIORITY; | |
| for (priority = DEF_PRIORITY; priority >= 0; priority--) { | |
| int end_zone = 0; /* Inclusive. 0 = ZONE_DMA */ | |
| unsigned long lru_pages = 0; | |
| /* The swap token gets in the way of swapout... */ | |
| if (!priority) | |
| disable_swap_token(); | |
| all_zones_ok = 1; | |
| /* | |
| * Scan in the highmem->dma direction for the highest | |
| * zone which needs scanning | |
| */ | |
| for (i = pgdat->nr_zones - 1; i >= 0; i--) { | |
| struct zone *zone = pgdat->node_zones + i; | |
| if (!populated_zone(zone)) | |
| continue; | |
| if (zone->all_unreclaimable && priority != DEF_PRIORITY) | |
| continue; | |
| if (!zone_watermark_ok(zone, order, zone->pages_high, | |
| 0, 0)) { | |
| end_zone = i; | |
| break; | |
| } | |
| } | |
| if (i < 0) | |
| goto out; | |
| for (i = 0; i <= end_zone; i++) { | |
| struct zone *zone = pgdat->node_zones + i; | |
| lru_pages += zone_page_state(zone, NR_ACTIVE) | |
| + zone_page_state(zone, NR_INACTIVE); | |
| } | |
| /* | |
| * Now scan the zone in the dma->highmem direction, stopping | |
| * at the last zone which needs scanning. | |
| * | |
| * We do this because the page allocator works in the opposite | |
| * direction. This prevents the page allocator from allocating | |
| * pages behind kswapd's direction of progress, which would | |
| * cause too much scanning of the lower zones. | |
| */ | |
| for (i = 0; i <= end_zone; i++) { | |
| struct zone *zone = pgdat->node_zones + i; | |
| int nr_slab; | |
| if (!populated_zone(zone)) | |
| continue; | |
| if (zone->all_unreclaimable && priority != DEF_PRIORITY) | |
| continue; | |
| if (!zone_watermark_ok(zone, order, zone->pages_high, | |
| end_zone, 0)) | |
| all_zones_ok = 0; | |
| temp_priority[i] = priority; | |
| sc.nr_scanned = 0; | |
| note_zone_scanning_priority(zone, priority); | |
| nr_reclaimed += shrink_zone(priority, zone, &sc); | |
| reclaim_state->reclaimed_slab = 0; | |
| nr_slab = shrink_slab(sc.nr_scanned, GFP_KERNEL, | |
| lru_pages); | |
| nr_reclaimed += reclaim_state->reclaimed_slab; | |
| total_scanned += sc.nr_scanned; | |
| if (zone->all_unreclaimable) | |
| continue; | |
| if (nr_slab == 0 && zone->pages_scanned >= | |
| (zone_page_state(zone, NR_ACTIVE) | |
| + zone_page_state(zone, NR_INACTIVE)) * 6) | |
| zone->all_unreclaimable = 1; | |
| /* | |
| * If we've done a decent amount of scanning and | |
| * the reclaim ratio is low, start doing writepage | |
| * even in laptop mode | |
| */ | |
| if (total_scanned > SWAP_CLUSTER_MAX * 2 && | |
| total_scanned > nr_reclaimed + nr_reclaimed / 2) | |
| sc.may_writepage = 1; | |
| } | |
| if (all_zones_ok) | |
| break; /* kswapd: all done */ | |
| /* | |
| * OK, kswapd is getting into trouble. Take a nap, then take | |
| * another pass across the zones. | |
| */ | |
| if (total_scanned && priority < DEF_PRIORITY - 2) | |
| congestion_wait(WRITE, HZ/10); | |
| /* | |
| * We do this so kswapd doesn't build up large priorities for | |
| * example when it is freeing in parallel with allocators. It | |
| * matches the direct reclaim path behaviour in terms of impact | |
| * on zone->*_priority. | |
| */ | |
| if (nr_reclaimed >= SWAP_CLUSTER_MAX) | |
| break; | |
| } | |
| out: | |
| /* | |
| * Note within each zone the priority level at which this zone was | |
| * brought into a happy state. So that the next thread which scans this | |
| * zone will start out at that priority level. | |
| */ | |
| for (i = 0; i < pgdat->nr_zones; i++) { | |
| struct zone *zone = pgdat->node_zones + i; | |
| zone->prev_priority = temp_priority[i]; | |
| } | |
| if (!all_zones_ok) { | |
| cond_resched(); | |
| try_to_freeze(); | |
| goto loop_again; | |
| } | |
| return nr_reclaimed; | |
| } | |
| /* | |
| * The background pageout daemon, started as a kernel thread | |
| * from the init process. | |
| * | |
| * This basically trickles out pages so that we have _some_ | |
| * free memory available even if there is no other activity | |
| * that frees anything up. This is needed for things like routing | |
| * etc, where we otherwise might have all activity going on in | |
| * asynchronous contexts that cannot page things out. | |
| * | |
| * If there are applications that are active memory-allocators | |
| * (most normal use), this basically shouldn't matter. | |
| */ | |
| static int kswapd(void *p) | |
| { | |
| unsigned long order; | |
| pg_data_t *pgdat = (pg_data_t*)p; | |
| struct task_struct *tsk = current; | |
| DEFINE_WAIT(wait); | |
| struct reclaim_state reclaim_state = { | |
| .reclaimed_slab = 0, | |
| }; | |
| cpumask_t cpumask; | |
| cpumask = node_to_cpumask(pgdat->node_id); | |
| if (!cpus_empty(cpumask)) | |
| set_cpus_allowed(tsk, cpumask); | |
| current->reclaim_state = &reclaim_state; | |
| /* | |
| * Tell the memory management that we're a "memory allocator", | |
| * and that if we need more memory we should get access to it | |
| * regardless (see "__alloc_pages()"). "kswapd" should | |
| * never get caught in the normal page freeing logic. | |
| * | |
| * (Kswapd normally doesn't need memory anyway, but sometimes | |
| * you need a small amount of memory in order to be able to | |
| * page out something else, and this flag essentially protects | |
| * us from recursively trying to free more memory as we're | |
| * trying to free the first piece of memory in the first place). | |
| */ | |
| tsk->flags |= PF_MEMALLOC | PF_SWAPWRITE | PF_KSWAPD; | |
| set_freezable(); | |
| order = 0; | |
| for ( ; ; ) { | |
| unsigned long new_order; | |
| prepare_to_wait(&pgdat->kswapd_wait, &wait, TASK_INTERRUPTIBLE); | |
| new_order = pgdat->kswapd_max_order; | |
| pgdat->kswapd_max_order = 0; | |
| if (order < new_order) { | |
| /* | |
| * Don't sleep if someone wants a larger 'order' | |
| * allocation | |
| */ | |
| order = new_order; | |
| } else { | |
| if (!freezing(current)) | |
| schedule(); | |
| order = pgdat->kswapd_max_order; | |
| } | |
| finish_wait(&pgdat->kswapd_wait, &wait); | |
| if (!try_to_freeze()) { | |
| /* We can speed up thawing tasks if we don't call | |
| * balance_pgdat after returning from the refrigerator | |
| */ | |
| balance_pgdat(pgdat, order); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * A zone is low on free memory, so wake its kswapd task to service it. | |
| */ | |
| void wakeup_kswapd(struct zone *zone, int order) | |
| { | |
| pg_data_t *pgdat; | |
| if (!populated_zone(zone)) | |
| return; | |
| pgdat = zone->zone_pgdat; | |
| if (zone_watermark_ok(zone, order, zone->pages_low, 0, 0)) | |
| return; | |
| if (pgdat->kswapd_max_order < order) | |
| pgdat->kswapd_max_order = order; | |
| if (!cpuset_zone_allowed_hardwall(zone, GFP_KERNEL)) | |
| return; | |
| if (!waitqueue_active(&pgdat->kswapd_wait)) | |
| return; | |
| wake_up_interruptible(&pgdat->kswapd_wait); | |
| } | |
| #ifdef CONFIG_PM | |
| /* | |
| * Helper function for shrink_all_memory(). Tries to reclaim 'nr_pages' pages | |
| * from LRU lists system-wide, for given pass and priority, and returns the | |
| * number of reclaimed pages | |
| * | |
| * For pass > 3 we also try to shrink the LRU lists that contain a few pages | |
| */ | |
| static unsigned long shrink_all_zones(unsigned long nr_pages, int prio, | |
| int pass, struct scan_control *sc) | |
| { | |
| struct zone *zone; | |
| unsigned long nr_to_scan, ret = 0; | |
| for_each_zone(zone) { | |
| if (!populated_zone(zone)) | |
| continue; | |
| if (zone->all_unreclaimable && prio != DEF_PRIORITY) | |
| continue; | |
| /* For pass = 0 we don't shrink the active list */ | |
| if (pass > 0) { | |
| zone->nr_scan_active += | |
| (zone_page_state(zone, NR_ACTIVE) >> prio) + 1; | |
| if (zone->nr_scan_active >= nr_pages || pass > 3) { | |
| zone->nr_scan_active = 0; | |
| nr_to_scan = min(nr_pages, | |
| zone_page_state(zone, NR_ACTIVE)); | |
| shrink_active_list(nr_to_scan, zone, sc, prio); | |
| } | |
| } | |
| zone->nr_scan_inactive += | |
| (zone_page_state(zone, NR_INACTIVE) >> prio) + 1; | |
| if (zone->nr_scan_inactive >= nr_pages || pass > 3) { | |
| zone->nr_scan_inactive = 0; | |
| nr_to_scan = min(nr_pages, | |
| zone_page_state(zone, NR_INACTIVE)); | |
| ret += shrink_inactive_list(nr_to_scan, zone, sc); | |
| if (ret >= nr_pages) | |
| return ret; | |
| } | |
| } | |
| return ret; | |
| } | |
| static unsigned long count_lru_pages(void) | |
| { | |
| return global_page_state(NR_ACTIVE) + global_page_state(NR_INACTIVE); | |
| } | |
| /* | |
| * Try to free `nr_pages' of memory, system-wide, and return the number of | |
| * freed pages. | |
| * | |
| * Rather than trying to age LRUs the aim is to preserve the overall | |
| * LRU order by reclaiming preferentially | |
| * inactive > active > active referenced > active mapped | |
| */ | |
| unsigned long shrink_all_memory(unsigned long nr_pages) | |
| { | |
| unsigned long lru_pages, nr_slab; | |
| unsigned long ret = 0; | |
| int pass; | |
| struct reclaim_state reclaim_state; | |
| struct scan_control sc = { | |
| .gfp_mask = GFP_KERNEL, | |
| .may_swap = 0, | |
| .swap_cluster_max = nr_pages, | |
| .may_writepage = 1, | |
| .swappiness = vm_swappiness, | |
| }; | |
| current->reclaim_state = &reclaim_state; | |
| lru_pages = count_lru_pages(); | |
| nr_slab = global_page_state(NR_SLAB_RECLAIMABLE); | |
| /* If slab caches are huge, it's better to hit them first */ | |
| while (nr_slab >= lru_pages) { | |
| reclaim_state.reclaimed_slab = 0; | |
| shrink_slab(nr_pages, sc.gfp_mask, lru_pages); | |
| if (!reclaim_state.reclaimed_slab) | |
| break; | |
| ret += reclaim_state.reclaimed_slab; | |
| if (ret >= nr_pages) | |
| goto out; | |
| nr_slab -= reclaim_state.reclaimed_slab; | |
| } | |
| /* | |
| * We try to shrink LRUs in 5 passes: | |
| * 0 = Reclaim from inactive_list only | |
| * 1 = Reclaim from active list but don't reclaim mapped | |
| * 2 = 2nd pass of type 1 | |
| * 3 = Reclaim mapped (normal reclaim) | |
| * 4 = 2nd pass of type 3 | |
| */ | |
| for (pass = 0; pass < 5; pass++) { | |
| int prio; | |
| /* Force reclaiming mapped pages in the passes #3 and #4 */ | |
| if (pass > 2) { | |
| sc.may_swap = 1; | |
| sc.swappiness = 100; | |
| } | |
| for (prio = DEF_PRIORITY; prio >= 0; prio--) { | |
| unsigned long nr_to_scan = nr_pages - ret; | |
| sc.nr_scanned = 0; | |
| ret += shrink_all_zones(nr_to_scan, prio, pass, &sc); | |
| if (ret >= nr_pages) | |
| goto out; | |
| reclaim_state.reclaimed_slab = 0; | |
| shrink_slab(sc.nr_scanned, sc.gfp_mask, | |
| count_lru_pages()); | |
| ret += reclaim_state.reclaimed_slab; | |
| if (ret >= nr_pages) | |
| goto out; | |
| if (sc.nr_scanned && prio < DEF_PRIORITY - 2) | |
| congestion_wait(WRITE, HZ / 10); | |
| } | |
| } | |
| /* | |
| * If ret = 0, we could not shrink LRUs, but there may be something | |
| * in slab caches | |
| */ | |
| if (!ret) { | |
| do { | |
| reclaim_state.reclaimed_slab = 0; | |
| shrink_slab(nr_pages, sc.gfp_mask, count_lru_pages()); | |
| ret += reclaim_state.reclaimed_slab; | |
| } while (ret < nr_pages && reclaim_state.reclaimed_slab > 0); | |
| } | |
| out: | |
| current->reclaim_state = NULL; | |
| return ret; | |
| } | |
| #endif | |
| /* It's optimal to keep kswapds on the same CPUs as their memory, but | |
| not required for correctness. So if the last cpu in a node goes | |
| away, we get changed to run anywhere: as the first one comes back, | |
| restore their cpu bindings. */ | |
| static int __devinit cpu_callback(struct notifier_block *nfb, | |
| unsigned long action, void *hcpu) | |
| { | |
| pg_data_t *pgdat; | |
| cpumask_t mask; | |
| if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN) { | |
| for_each_online_pgdat(pgdat) { | |
| mask = node_to_cpumask(pgdat->node_id); | |
| if (any_online_cpu(mask) != NR_CPUS) | |
| /* One of our CPUs online: restore mask */ | |
| set_cpus_allowed(pgdat->kswapd, mask); | |
| } | |
| } | |
| return NOTIFY_OK; | |
| } | |
| /* | |
| * This kswapd start function will be called by init and node-hot-add. | |
| * On node-hot-add, kswapd will moved to proper cpus if cpus are hot-added. | |
| */ | |
| int kswapd_run(int nid) | |
| { | |
| pg_data_t *pgdat = NODE_DATA(nid); | |
| int ret = 0; | |
| if (pgdat->kswapd) | |
| return 0; | |
| pgdat->kswapd = kthread_run(kswapd, pgdat, "kswapd%d", nid); | |
| if (IS_ERR(pgdat->kswapd)) { | |
| /* failure at boot is fatal */ | |
| BUG_ON(system_state == SYSTEM_BOOTING); | |
| printk("Failed to start kswapd on node %d\n",nid); | |
| ret = -1; | |
| } | |
| return ret; | |
| } | |
| static int __init kswapd_init(void) | |
| { | |
| int nid; | |
| swap_setup(); | |
| for_each_online_node(nid) | |
| kswapd_run(nid); | |
| hotcpu_notifier(cpu_callback, 0); | |
| return 0; | |
| } | |
| module_init(kswapd_init) | |
| #ifdef CONFIG_NUMA | |
| /* | |
| * Zone reclaim mode | |
| * | |
| * If non-zero call zone_reclaim when the number of free pages falls below | |
| * the watermarks. | |
| */ | |
| int zone_reclaim_mode __read_mostly; | |
| #define RECLAIM_OFF 0 | |
| #define RECLAIM_ZONE (1<<0) /* Run shrink_cache on the zone */ | |
| #define RECLAIM_WRITE (1<<1) /* Writeout pages during reclaim */ | |
| #define RECLAIM_SWAP (1<<2) /* Swap pages out during reclaim */ | |
| /* | |
| * Priority for ZONE_RECLAIM. This determines the fraction of pages | |
| * of a node considered for each zone_reclaim. 4 scans 1/16th of | |
| * a zone. | |
| */ | |
| #define ZONE_RECLAIM_PRIORITY 4 | |
| /* | |
| * Percentage of pages in a zone that must be unmapped for zone_reclaim to | |
| * occur. | |
| */ | |
| int sysctl_min_unmapped_ratio = 1; | |
| /* | |
| * If the number of slab pages in a zone grows beyond this percentage then | |
| * slab reclaim needs to occur. | |
| */ | |
| int sysctl_min_slab_ratio = 5; | |
| /* | |
| * Try to free up some pages from this zone through reclaim. | |
| */ | |
| static int __zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) | |
| { | |
| /* Minimum pages needed in order to stay on node */ | |
| const unsigned long nr_pages = 1 << order; | |
| struct task_struct *p = current; | |
| struct reclaim_state reclaim_state; | |
| int priority; | |
| unsigned long nr_reclaimed = 0; | |
| struct scan_control sc = { | |
| .may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE), | |
| .may_swap = !!(zone_reclaim_mode & RECLAIM_SWAP), | |
| .swap_cluster_max = max_t(unsigned long, nr_pages, | |
| SWAP_CLUSTER_MAX), | |
| .gfp_mask = gfp_mask, | |
| .swappiness = vm_swappiness, | |
| }; | |
| unsigned long slab_reclaimable; | |
| disable_swap_token(); | |
| cond_resched(); | |
| /* | |
| * We need to be able to allocate from the reserves for RECLAIM_SWAP | |
| * and we also need to be able to write out pages for RECLAIM_WRITE | |
| * and RECLAIM_SWAP. | |
| */ | |
| p->flags |= PF_MEMALLOC | PF_SWAPWRITE; | |
| reclaim_state.reclaimed_slab = 0; | |
| p->reclaim_state = &reclaim_state; | |
| if (zone_page_state(zone, NR_FILE_PAGES) - | |
| zone_page_state(zone, NR_FILE_MAPPED) > | |
| zone->min_unmapped_pages) { | |
| /* | |
| * Free memory by calling shrink zone with increasing | |
| * priorities until we have enough memory freed. | |
| */ | |
| priority = ZONE_RECLAIM_PRIORITY; | |
| do { | |
| note_zone_scanning_priority(zone, priority); | |
| nr_reclaimed += shrink_zone(priority, zone, &sc); | |
| priority--; | |
| } while (priority >= 0 && nr_reclaimed < nr_pages); | |
| } | |
| slab_reclaimable = zone_page_state(zone, NR_SLAB_RECLAIMABLE); | |
| if (slab_reclaimable > zone->min_slab_pages) { | |
| /* | |
| * shrink_slab() does not currently allow us to determine how | |
| * many pages were freed in this zone. So we take the current | |
| * number of slab pages and shake the slab until it is reduced | |
| * by the same nr_pages that we used for reclaiming unmapped | |
| * pages. | |
| * | |
| * Note that shrink_slab will free memory on all zones and may | |
| * take a long time. | |
| */ | |
| while (shrink_slab(sc.nr_scanned, gfp_mask, order) && | |
| zone_page_state(zone, NR_SLAB_RECLAIMABLE) > | |
| slab_reclaimable - nr_pages) | |
| ; | |
| /* | |
| * Update nr_reclaimed by the number of slab pages we | |
| * reclaimed from this zone. | |
| */ | |
| nr_reclaimed += slab_reclaimable - | |
| zone_page_state(zone, NR_SLAB_RECLAIMABLE); | |
| } | |
| p->reclaim_state = NULL; | |
| current->flags &= ~(PF_MEMALLOC | PF_SWAPWRITE); | |
| return nr_reclaimed >= nr_pages; | |
| } | |
| int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) | |
| { | |
| cpumask_t mask; | |
| int node_id; | |
| /* | |
| * Zone reclaim reclaims unmapped file backed pages and | |
| * slab pages if we are over the defined limits. | |
| * | |
| * A small portion of unmapped file backed pages is needed for | |
| * file I/O otherwise pages read by file I/O will be immediately | |
| * thrown out if the zone is overallocated. So we do not reclaim | |
| * if less than a specified percentage of the zone is used by | |
| * unmapped file backed pages. | |
| */ | |
| if (zone_page_state(zone, NR_FILE_PAGES) - | |
| zone_page_state(zone, NR_FILE_MAPPED) <= zone->min_unmapped_pages | |
| && zone_page_state(zone, NR_SLAB_RECLAIMABLE) | |
| <= zone->min_slab_pages) | |
| return 0; | |
| /* | |
| * Avoid concurrent zone reclaims, do not reclaim in a zone that does | |
| * not have reclaimable pages and if we should not delay the allocation | |
| * then do not scan. | |
| */ | |
| if (!(gfp_mask & __GFP_WAIT) || | |
| zone->all_unreclaimable || | |
| atomic_read(&zone->reclaim_in_progress) > 0 || | |
| (current->flags & PF_MEMALLOC)) | |
| return 0; | |
| /* | |
| * Only run zone reclaim on the local zone or on zones that do not | |
| * have associated processors. This will favor the local processor | |
| * over remote processors and spread off node memory allocations | |
| * as wide as possible. | |
| */ | |
| node_id = zone_to_nid(zone); | |
| mask = node_to_cpumask(node_id); | |
| if (!cpus_empty(mask) && node_id != numa_node_id()) | |
| return 0; | |
| return __zone_reclaim(zone, gfp_mask, order); | |
| } | |
| #endif |