| /* |
| * include/asm-v850/sim85e2.h -- Machine-dependent defs for |
| * V850E2 RTL simulator |
| * |
| * Copyright (C) 2002,03 NEC Electronics Corporation |
| * Copyright (C) 2002,03 Miles Bader <miles@gnu.org> |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file COPYING in the main directory of this |
| * archive for more details. |
| * |
| * Written by Miles Bader <miles@gnu.org> |
| */ |
| |
| #ifndef __V850_SIM85E2_H__ |
| #define __V850_SIM85E2_H__ |
| |
| |
| #include <asm/v850e2.h> /* Based on V850E2 core. */ |
| |
| |
| /* Various memory areas supported by the simulator. |
| These should match the corresponding definitions in the linker script. */ |
| |
| /* `instruction RAM'; instruction fetches are much faster from IRAM than |
| from DRAM. */ |
| #define IRAM_ADDR 0 |
| #define IRAM_SIZE 0x00100000 /* 1MB */ |
| /* `data RAM', below and contiguous with the I/O space. |
| Data fetches are much faster from DRAM than from IRAM. */ |
| #define DRAM_ADDR 0xfff00000 |
| #define DRAM_SIZE 0x000ff000 /* 1020KB */ |
| /* `external ram'. Unlike the above RAM areas, this memory is cached, |
| so both instruction and data fetches should be (mostly) fast -- |
| however, currently only write-through caching is supported, so writes |
| to ERAM will be slow. */ |
| #define ERAM_ADDR 0x00100000 |
| #define ERAM_SIZE 0x07f00000 /* 127MB (max) */ |
| /* Dynamic RAM; uses memory controller. */ |
| #define SDRAM_ADDR 0x10000000 |
| #define SDRAM_SIZE 0x01000000 /* 16MB */ |
| |
| |
| /* Simulator specific control registers. */ |
| /* NOTHAL controls whether the simulator will stop at a `halt' insn. */ |
| #define SIM85E2_NOTHAL_ADDR 0xffffff22 |
| #define SIM85E2_NOTHAL (*(volatile u8 *)SIM85E2_NOTHAL_ADDR) |
| /* The simulator will stop N cycles after N is written to SIMFIN. */ |
| #define SIM85E2_SIMFIN_ADDR 0xffffff24 |
| #define SIM85E2_SIMFIN (*(volatile u16 *)SIM85E2_SIMFIN_ADDR) |
| |
| |
| /* For <asm/irq.h> */ |
| #define NUM_CPU_IRQS 64 |
| |
| |
| /* For <asm/page.h> */ |
| #define PAGE_OFFSET SDRAM_ADDR |
| |
| |
| /* For <asm/entry.h> */ |
| /* `R0 RAM', used for a few miscellaneous variables that must be accessible |
| using a load instruction relative to R0. The sim85e2 simulator |
| actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily |
| choose a small portion at the end of that. */ |
| #define R0_RAM_ADDR 0xFFFFE000 |
| |
| |
| /* For <asm/param.h> */ |
| #ifndef HZ |
| #define HZ 24 /* Minimum supported frequency. */ |
| #endif |
| |
| |
| #endif /* __V850_SIM85E2_H__ */ |
