| /* Linux driver for NAND Flash Translation Layer */ | |
| /* (c) 1999 Machine Vision Holdings, Inc. */ | |
| /* Author: David Woodhouse <dwmw2@infradead.org> */ | |
| /* $Id: nftlcore.c,v 1.98 2005/11/07 11:14:21 gleixner Exp $ */ | |
| /* | |
| The contents of this file are distributed under the GNU General | |
| Public License version 2. The author places no additional | |
| restrictions of any kind on it. | |
| */ | |
| #define PRERELEASE | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <asm/errno.h> | |
| #include <asm/io.h> | |
| #include <asm/uaccess.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/delay.h> | |
| #include <linux/slab.h> | |
| #include <linux/init.h> | |
| #include <linux/hdreg.h> | |
| #include <linux/kmod.h> | |
| #include <linux/mtd/mtd.h> | |
| #include <linux/mtd/nand.h> | |
| #include <linux/mtd/nftl.h> | |
| #include <linux/mtd/blktrans.h> | |
| /* maximum number of loops while examining next block, to have a | |
| chance to detect consistency problems (they should never happen | |
| because of the checks done in the mounting */ | |
| #define MAX_LOOPS 10000 | |
| static void nftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd) | |
| { | |
| struct NFTLrecord *nftl; | |
| unsigned long temp; | |
| if (mtd->type != MTD_NANDFLASH) | |
| return; | |
| /* OK, this is moderately ugly. But probably safe. Alternatives? */ | |
| if (memcmp(mtd->name, "DiskOnChip", 10)) | |
| return; | |
| if (!mtd->block_isbad) { | |
| printk(KERN_ERR | |
| "NFTL no longer supports the old DiskOnChip drivers loaded via docprobe.\n" | |
| "Please use the new diskonchip driver under the NAND subsystem.\n"); | |
| return; | |
| } | |
| DEBUG(MTD_DEBUG_LEVEL1, "NFTL: add_mtd for %s\n", mtd->name); | |
| nftl = kzalloc(sizeof(struct NFTLrecord), GFP_KERNEL); | |
| if (!nftl) { | |
| printk(KERN_WARNING "NFTL: out of memory for data structures\n"); | |
| return; | |
| } | |
| nftl->mbd.mtd = mtd; | |
| nftl->mbd.devnum = -1; | |
| nftl->mbd.tr = tr; | |
| if (NFTL_mount(nftl) < 0) { | |
| printk(KERN_WARNING "NFTL: could not mount device\n"); | |
| kfree(nftl); | |
| return; | |
| } | |
| /* OK, it's a new one. Set up all the data structures. */ | |
| /* Calculate geometry */ | |
| nftl->cylinders = 1024; | |
| nftl->heads = 16; | |
| temp = nftl->cylinders * nftl->heads; | |
| nftl->sectors = nftl->mbd.size / temp; | |
| if (nftl->mbd.size % temp) { | |
| nftl->sectors++; | |
| temp = nftl->cylinders * nftl->sectors; | |
| nftl->heads = nftl->mbd.size / temp; | |
| if (nftl->mbd.size % temp) { | |
| nftl->heads++; | |
| temp = nftl->heads * nftl->sectors; | |
| nftl->cylinders = nftl->mbd.size / temp; | |
| } | |
| } | |
| if (nftl->mbd.size != nftl->heads * nftl->cylinders * nftl->sectors) { | |
| /* | |
| Oh no we don't have | |
| mbd.size == heads * cylinders * sectors | |
| */ | |
| printk(KERN_WARNING "NFTL: cannot calculate a geometry to " | |
| "match size of 0x%lx.\n", nftl->mbd.size); | |
| printk(KERN_WARNING "NFTL: using C:%d H:%d S:%d " | |
| "(== 0x%lx sects)\n", | |
| nftl->cylinders, nftl->heads , nftl->sectors, | |
| (long)nftl->cylinders * (long)nftl->heads * | |
| (long)nftl->sectors ); | |
| } | |
| if (add_mtd_blktrans_dev(&nftl->mbd)) { | |
| kfree(nftl->ReplUnitTable); | |
| kfree(nftl->EUNtable); | |
| kfree(nftl); | |
| return; | |
| } | |
| #ifdef PSYCHO_DEBUG | |
| printk(KERN_INFO "NFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a'); | |
| #endif | |
| } | |
| static void nftl_remove_dev(struct mtd_blktrans_dev *dev) | |
| { | |
| struct NFTLrecord *nftl = (void *)dev; | |
| DEBUG(MTD_DEBUG_LEVEL1, "NFTL: remove_dev (i=%d)\n", dev->devnum); | |
| del_mtd_blktrans_dev(dev); | |
| kfree(nftl->ReplUnitTable); | |
| kfree(nftl->EUNtable); | |
| kfree(nftl); | |
| } | |
| /* | |
| * Read oob data from flash | |
| */ | |
| int nftl_read_oob(struct mtd_info *mtd, loff_t offs, size_t len, | |
| size_t *retlen, uint8_t *buf) | |
| { | |
| struct mtd_oob_ops ops; | |
| int res; | |
| ops.mode = MTD_OOB_PLACE; | |
| ops.ooboffs = offs & (mtd->writesize - 1); | |
| ops.ooblen = len; | |
| ops.oobbuf = buf; | |
| ops.datbuf = NULL; | |
| res = mtd->read_oob(mtd, offs & ~(mtd->writesize - 1), &ops); | |
| *retlen = ops.oobretlen; | |
| return res; | |
| } | |
| /* | |
| * Write oob data to flash | |
| */ | |
| int nftl_write_oob(struct mtd_info *mtd, loff_t offs, size_t len, | |
| size_t *retlen, uint8_t *buf) | |
| { | |
| struct mtd_oob_ops ops; | |
| int res; | |
| ops.mode = MTD_OOB_PLACE; | |
| ops.ooboffs = offs & (mtd->writesize - 1); | |
| ops.ooblen = len; | |
| ops.oobbuf = buf; | |
| ops.datbuf = NULL; | |
| res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); | |
| *retlen = ops.oobretlen; | |
| return res; | |
| } | |
| #ifdef CONFIG_NFTL_RW | |
| /* | |
| * Write data and oob to flash | |
| */ | |
| static int nftl_write(struct mtd_info *mtd, loff_t offs, size_t len, | |
| size_t *retlen, uint8_t *buf, uint8_t *oob) | |
| { | |
| struct mtd_oob_ops ops; | |
| int res; | |
| ops.mode = MTD_OOB_PLACE; | |
| ops.ooboffs = offs; | |
| ops.ooblen = mtd->oobsize; | |
| ops.oobbuf = oob; | |
| ops.datbuf = buf; | |
| ops.len = len; | |
| res = mtd->write_oob(mtd, offs & ~(mtd->writesize - 1), &ops); | |
| *retlen = ops.retlen; | |
| return res; | |
| } | |
| /* Actual NFTL access routines */ | |
| /* NFTL_findfreeblock: Find a free Erase Unit on the NFTL partition. This function is used | |
| * when the give Virtual Unit Chain | |
| */ | |
| static u16 NFTL_findfreeblock(struct NFTLrecord *nftl, int desperate ) | |
| { | |
| /* For a given Virtual Unit Chain: find or create a free block and | |
| add it to the chain */ | |
| /* We're passed the number of the last EUN in the chain, to save us from | |
| having to look it up again */ | |
| u16 pot = nftl->LastFreeEUN; | |
| int silly = nftl->nb_blocks; | |
| /* Normally, we force a fold to happen before we run out of free blocks completely */ | |
| if (!desperate && nftl->numfreeEUNs < 2) { | |
| DEBUG(MTD_DEBUG_LEVEL1, "NFTL_findfreeblock: there are too few free EUNs\n"); | |
| return 0xffff; | |
| } | |
| /* Scan for a free block */ | |
| do { | |
| if (nftl->ReplUnitTable[pot] == BLOCK_FREE) { | |
| nftl->LastFreeEUN = pot; | |
| nftl->numfreeEUNs--; | |
| return pot; | |
| } | |
| /* This will probably point to the MediaHdr unit itself, | |
| right at the beginning of the partition. But that unit | |
| (and the backup unit too) should have the UCI set | |
| up so that it's not selected for overwriting */ | |
| if (++pot > nftl->lastEUN) | |
| pot = le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN); | |
| if (!silly--) { | |
| printk("Argh! No free blocks found! LastFreeEUN = %d, " | |
| "FirstEUN = %d\n", nftl->LastFreeEUN, | |
| le16_to_cpu(nftl->MediaHdr.FirstPhysicalEUN)); | |
| return 0xffff; | |
| } | |
| } while (pot != nftl->LastFreeEUN); | |
| return 0xffff; | |
| } | |
| static u16 NFTL_foldchain (struct NFTLrecord *nftl, unsigned thisVUC, unsigned pendingblock ) | |
| { | |
| struct mtd_info *mtd = nftl->mbd.mtd; | |
| u16 BlockMap[MAX_SECTORS_PER_UNIT]; | |
| unsigned char BlockLastState[MAX_SECTORS_PER_UNIT]; | |
| unsigned char BlockFreeFound[MAX_SECTORS_PER_UNIT]; | |
| unsigned int thisEUN; | |
| int block; | |
| int silly; | |
| unsigned int targetEUN; | |
| struct nftl_oob oob; | |
| int inplace = 1; | |
| size_t retlen; | |
| memset(BlockMap, 0xff, sizeof(BlockMap)); | |
| memset(BlockFreeFound, 0, sizeof(BlockFreeFound)); | |
| thisEUN = nftl->EUNtable[thisVUC]; | |
| if (thisEUN == BLOCK_NIL) { | |
| printk(KERN_WARNING "Trying to fold non-existent " | |
| "Virtual Unit Chain %d!\n", thisVUC); | |
| return BLOCK_NIL; | |
| } | |
| /* Scan to find the Erase Unit which holds the actual data for each | |
| 512-byte block within the Chain. | |
| */ | |
| silly = MAX_LOOPS; | |
| targetEUN = BLOCK_NIL; | |
| while (thisEUN <= nftl->lastEUN ) { | |
| unsigned int status, foldmark; | |
| targetEUN = thisEUN; | |
| for (block = 0; block < nftl->EraseSize / 512; block ++) { | |
| nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) + | |
| (block * 512), 16 , &retlen, | |
| (char *)&oob); | |
| if (block == 2) { | |
| foldmark = oob.u.c.FoldMark | oob.u.c.FoldMark1; | |
| if (foldmark == FOLD_MARK_IN_PROGRESS) { | |
| DEBUG(MTD_DEBUG_LEVEL1, | |
| "Write Inhibited on EUN %d\n", thisEUN); | |
| inplace = 0; | |
| } else { | |
| /* There's no other reason not to do inplace, | |
| except ones that come later. So we don't need | |
| to preserve inplace */ | |
| inplace = 1; | |
| } | |
| } | |
| status = oob.b.Status | oob.b.Status1; | |
| BlockLastState[block] = status; | |
| switch(status) { | |
| case SECTOR_FREE: | |
| BlockFreeFound[block] = 1; | |
| break; | |
| case SECTOR_USED: | |
| if (!BlockFreeFound[block]) | |
| BlockMap[block] = thisEUN; | |
| else | |
| printk(KERN_WARNING | |
| "SECTOR_USED found after SECTOR_FREE " | |
| "in Virtual Unit Chain %d for block %d\n", | |
| thisVUC, block); | |
| break; | |
| case SECTOR_DELETED: | |
| if (!BlockFreeFound[block]) | |
| BlockMap[block] = BLOCK_NIL; | |
| else | |
| printk(KERN_WARNING | |
| "SECTOR_DELETED found after SECTOR_FREE " | |
| "in Virtual Unit Chain %d for block %d\n", | |
| thisVUC, block); | |
| break; | |
| case SECTOR_IGNORE: | |
| break; | |
| default: | |
| printk("Unknown status for block %d in EUN %d: %x\n", | |
| block, thisEUN, status); | |
| } | |
| } | |
| if (!silly--) { | |
| printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n", | |
| thisVUC); | |
| return BLOCK_NIL; | |
| } | |
| thisEUN = nftl->ReplUnitTable[thisEUN]; | |
| } | |
| if (inplace) { | |
| /* We're being asked to be a fold-in-place. Check | |
| that all blocks which actually have data associated | |
| with them (i.e. BlockMap[block] != BLOCK_NIL) are | |
| either already present or SECTOR_FREE in the target | |
| block. If not, we're going to have to fold out-of-place | |
| anyway. | |
| */ | |
| for (block = 0; block < nftl->EraseSize / 512 ; block++) { | |
| if (BlockLastState[block] != SECTOR_FREE && | |
| BlockMap[block] != BLOCK_NIL && | |
| BlockMap[block] != targetEUN) { | |
| DEBUG(MTD_DEBUG_LEVEL1, "Setting inplace to 0. VUC %d, " | |
| "block %d was %x lastEUN, " | |
| "and is in EUN %d (%s) %d\n", | |
| thisVUC, block, BlockLastState[block], | |
| BlockMap[block], | |
| BlockMap[block]== targetEUN ? "==" : "!=", | |
| targetEUN); | |
| inplace = 0; | |
| break; | |
| } | |
| } | |
| if (pendingblock >= (thisVUC * (nftl->EraseSize / 512)) && | |
| pendingblock < ((thisVUC + 1)* (nftl->EraseSize / 512)) && | |
| BlockLastState[pendingblock - (thisVUC * (nftl->EraseSize / 512))] != | |
| SECTOR_FREE) { | |
| DEBUG(MTD_DEBUG_LEVEL1, "Pending write not free in EUN %d. " | |
| "Folding out of place.\n", targetEUN); | |
| inplace = 0; | |
| } | |
| } | |
| if (!inplace) { | |
| DEBUG(MTD_DEBUG_LEVEL1, "Cannot fold Virtual Unit Chain %d in place. " | |
| "Trying out-of-place\n", thisVUC); | |
| /* We need to find a targetEUN to fold into. */ | |
| targetEUN = NFTL_findfreeblock(nftl, 1); | |
| if (targetEUN == BLOCK_NIL) { | |
| /* Ouch. Now we're screwed. We need to do a | |
| fold-in-place of another chain to make room | |
| for this one. We need a better way of selecting | |
| which chain to fold, because makefreeblock will | |
| only ask us to fold the same one again. | |
| */ | |
| printk(KERN_WARNING | |
| "NFTL_findfreeblock(desperate) returns 0xffff.\n"); | |
| return BLOCK_NIL; | |
| } | |
| } else { | |
| /* We put a fold mark in the chain we are folding only if we | |
| fold in place to help the mount check code. If we do not fold in | |
| place, it is possible to find the valid chain by selecting the | |
| longer one */ | |
| oob.u.c.FoldMark = oob.u.c.FoldMark1 = cpu_to_le16(FOLD_MARK_IN_PROGRESS); | |
| oob.u.c.unused = 0xffffffff; | |
| nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 2 * 512 + 8, | |
| 8, &retlen, (char *)&oob.u); | |
| } | |
| /* OK. We now know the location of every block in the Virtual Unit Chain, | |
| and the Erase Unit into which we are supposed to be copying. | |
| Go for it. | |
| */ | |
| DEBUG(MTD_DEBUG_LEVEL1,"Folding chain %d into unit %d\n", thisVUC, targetEUN); | |
| for (block = 0; block < nftl->EraseSize / 512 ; block++) { | |
| unsigned char movebuf[512]; | |
| int ret; | |
| /* If it's in the target EUN already, or if it's pending write, do nothing */ | |
| if (BlockMap[block] == targetEUN || | |
| (pendingblock == (thisVUC * (nftl->EraseSize / 512) + block))) { | |
| continue; | |
| } | |
| /* copy only in non free block (free blocks can only | |
| happen in case of media errors or deleted blocks) */ | |
| if (BlockMap[block] == BLOCK_NIL) | |
| continue; | |
| ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) + (block * 512), | |
| 512, &retlen, movebuf); | |
| if (ret < 0 && ret != -EUCLEAN) { | |
| ret = mtd->read(mtd, (nftl->EraseSize * BlockMap[block]) | |
| + (block * 512), 512, &retlen, | |
| movebuf); | |
| if (ret != -EIO) | |
| printk("Error went away on retry.\n"); | |
| } | |
| memset(&oob, 0xff, sizeof(struct nftl_oob)); | |
| oob.b.Status = oob.b.Status1 = SECTOR_USED; | |
| nftl_write(nftl->mbd.mtd, (nftl->EraseSize * targetEUN) + | |
| (block * 512), 512, &retlen, movebuf, (char *)&oob); | |
| } | |
| /* add the header so that it is now a valid chain */ | |
| oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); | |
| oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum = 0xffff; | |
| nftl_write_oob(mtd, (nftl->EraseSize * targetEUN) + 8, | |
| 8, &retlen, (char *)&oob.u); | |
| /* OK. We've moved the whole lot into the new block. Now we have to free the original blocks. */ | |
| /* At this point, we have two different chains for this Virtual Unit, and no way to tell | |
| them apart. If we crash now, we get confused. However, both contain the same data, so we | |
| shouldn't actually lose data in this case. It's just that when we load up on a medium which | |
| has duplicate chains, we need to free one of the chains because it's not necessary any more. | |
| */ | |
| thisEUN = nftl->EUNtable[thisVUC]; | |
| DEBUG(MTD_DEBUG_LEVEL1,"Want to erase\n"); | |
| /* For each block in the old chain (except the targetEUN of course), | |
| free it and make it available for future use */ | |
| while (thisEUN <= nftl->lastEUN && thisEUN != targetEUN) { | |
| unsigned int EUNtmp; | |
| EUNtmp = nftl->ReplUnitTable[thisEUN]; | |
| if (NFTL_formatblock(nftl, thisEUN) < 0) { | |
| /* could not erase : mark block as reserved | |
| */ | |
| nftl->ReplUnitTable[thisEUN] = BLOCK_RESERVED; | |
| } else { | |
| /* correctly erased : mark it as free */ | |
| nftl->ReplUnitTable[thisEUN] = BLOCK_FREE; | |
| nftl->numfreeEUNs++; | |
| } | |
| thisEUN = EUNtmp; | |
| } | |
| /* Make this the new start of chain for thisVUC */ | |
| nftl->ReplUnitTable[targetEUN] = BLOCK_NIL; | |
| nftl->EUNtable[thisVUC] = targetEUN; | |
| return targetEUN; | |
| } | |
| static u16 NFTL_makefreeblock( struct NFTLrecord *nftl , unsigned pendingblock) | |
| { | |
| /* This is the part that needs some cleverness applied. | |
| For now, I'm doing the minimum applicable to actually | |
| get the thing to work. | |
| Wear-levelling and other clever stuff needs to be implemented | |
| and we also need to do some assessment of the results when | |
| the system loses power half-way through the routine. | |
| */ | |
| u16 LongestChain = 0; | |
| u16 ChainLength = 0, thislen; | |
| u16 chain, EUN; | |
| for (chain = 0; chain < le32_to_cpu(nftl->MediaHdr.FormattedSize) / nftl->EraseSize; chain++) { | |
| EUN = nftl->EUNtable[chain]; | |
| thislen = 0; | |
| while (EUN <= nftl->lastEUN) { | |
| thislen++; | |
| //printk("VUC %d reaches len %d with EUN %d\n", chain, thislen, EUN); | |
| EUN = nftl->ReplUnitTable[EUN] & 0x7fff; | |
| if (thislen > 0xff00) { | |
| printk("Endless loop in Virtual Chain %d: Unit %x\n", | |
| chain, EUN); | |
| } | |
| if (thislen > 0xff10) { | |
| /* Actually, don't return failure. Just ignore this chain and | |
| get on with it. */ | |
| thislen = 0; | |
| break; | |
| } | |
| } | |
| if (thislen > ChainLength) { | |
| //printk("New longest chain is %d with length %d\n", chain, thislen); | |
| ChainLength = thislen; | |
| LongestChain = chain; | |
| } | |
| } | |
| if (ChainLength < 2) { | |
| printk(KERN_WARNING "No Virtual Unit Chains available for folding. " | |
| "Failing request\n"); | |
| return 0xffff; | |
| } | |
| return NFTL_foldchain (nftl, LongestChain, pendingblock); | |
| } | |
| /* NFTL_findwriteunit: Return the unit number into which we can write | |
| for this block. Make it available if it isn't already | |
| */ | |
| static inline u16 NFTL_findwriteunit(struct NFTLrecord *nftl, unsigned block) | |
| { | |
| u16 lastEUN; | |
| u16 thisVUC = block / (nftl->EraseSize / 512); | |
| struct mtd_info *mtd = nftl->mbd.mtd; | |
| unsigned int writeEUN; | |
| unsigned long blockofs = (block * 512) & (nftl->EraseSize -1); | |
| size_t retlen; | |
| int silly, silly2 = 3; | |
| struct nftl_oob oob; | |
| do { | |
| /* Scan the media to find a unit in the VUC which has | |
| a free space for the block in question. | |
| */ | |
| /* This condition catches the 0x[7f]fff cases, as well as | |
| being a sanity check for past-end-of-media access | |
| */ | |
| lastEUN = BLOCK_NIL; | |
| writeEUN = nftl->EUNtable[thisVUC]; | |
| silly = MAX_LOOPS; | |
| while (writeEUN <= nftl->lastEUN) { | |
| struct nftl_bci bci; | |
| size_t retlen; | |
| unsigned int status; | |
| lastEUN = writeEUN; | |
| nftl_read_oob(mtd, | |
| (writeEUN * nftl->EraseSize) + blockofs, | |
| 8, &retlen, (char *)&bci); | |
| DEBUG(MTD_DEBUG_LEVEL2, "Status of block %d in EUN %d is %x\n", | |
| block , writeEUN, le16_to_cpu(bci.Status)); | |
| status = bci.Status | bci.Status1; | |
| switch(status) { | |
| case SECTOR_FREE: | |
| return writeEUN; | |
| case SECTOR_DELETED: | |
| case SECTOR_USED: | |
| case SECTOR_IGNORE: | |
| break; | |
| default: | |
| // Invalid block. Don't use it any more. Must implement. | |
| break; | |
| } | |
| if (!silly--) { | |
| printk(KERN_WARNING | |
| "Infinite loop in Virtual Unit Chain 0x%x\n", | |
| thisVUC); | |
| return 0xffff; | |
| } | |
| /* Skip to next block in chain */ | |
| writeEUN = nftl->ReplUnitTable[writeEUN]; | |
| } | |
| /* OK. We didn't find one in the existing chain, or there | |
| is no existing chain. */ | |
| /* Try to find an already-free block */ | |
| writeEUN = NFTL_findfreeblock(nftl, 0); | |
| if (writeEUN == BLOCK_NIL) { | |
| /* That didn't work - there were no free blocks just | |
| waiting to be picked up. We're going to have to fold | |
| a chain to make room. | |
| */ | |
| /* First remember the start of this chain */ | |
| //u16 startEUN = nftl->EUNtable[thisVUC]; | |
| //printk("Write to VirtualUnitChain %d, calling makefreeblock()\n", thisVUC); | |
| writeEUN = NFTL_makefreeblock(nftl, 0xffff); | |
| if (writeEUN == BLOCK_NIL) { | |
| /* OK, we accept that the above comment is | |
| lying - there may have been free blocks | |
| last time we called NFTL_findfreeblock(), | |
| but they are reserved for when we're | |
| desperate. Well, now we're desperate. | |
| */ | |
| DEBUG(MTD_DEBUG_LEVEL1, "Using desperate==1 to find free EUN to accommodate write to VUC %d\n", thisVUC); | |
| writeEUN = NFTL_findfreeblock(nftl, 1); | |
| } | |
| if (writeEUN == BLOCK_NIL) { | |
| /* Ouch. This should never happen - we should | |
| always be able to make some room somehow. | |
| If we get here, we've allocated more storage | |
| space than actual media, or our makefreeblock | |
| routine is missing something. | |
| */ | |
| printk(KERN_WARNING "Cannot make free space.\n"); | |
| return BLOCK_NIL; | |
| } | |
| //printk("Restarting scan\n"); | |
| lastEUN = BLOCK_NIL; | |
| continue; | |
| } | |
| /* We've found a free block. Insert it into the chain. */ | |
| if (lastEUN != BLOCK_NIL) { | |
| thisVUC |= 0x8000; /* It's a replacement block */ | |
| } else { | |
| /* The first block in a new chain */ | |
| nftl->EUNtable[thisVUC] = writeEUN; | |
| } | |
| /* set up the actual EUN we're writing into */ | |
| /* Both in our cache... */ | |
| nftl->ReplUnitTable[writeEUN] = BLOCK_NIL; | |
| /* ... and on the flash itself */ | |
| nftl_read_oob(mtd, writeEUN * nftl->EraseSize + 8, 8, | |
| &retlen, (char *)&oob.u); | |
| oob.u.a.VirtUnitNum = oob.u.a.SpareVirtUnitNum = cpu_to_le16(thisVUC); | |
| nftl_write_oob(mtd, writeEUN * nftl->EraseSize + 8, 8, | |
| &retlen, (char *)&oob.u); | |
| /* we link the new block to the chain only after the | |
| block is ready. It avoids the case where the chain | |
| could point to a free block */ | |
| if (lastEUN != BLOCK_NIL) { | |
| /* Both in our cache... */ | |
| nftl->ReplUnitTable[lastEUN] = writeEUN; | |
| /* ... and on the flash itself */ | |
| nftl_read_oob(mtd, (lastEUN * nftl->EraseSize) + 8, | |
| 8, &retlen, (char *)&oob.u); | |
| oob.u.a.ReplUnitNum = oob.u.a.SpareReplUnitNum | |
| = cpu_to_le16(writeEUN); | |
| nftl_write_oob(mtd, (lastEUN * nftl->EraseSize) + 8, | |
| 8, &retlen, (char *)&oob.u); | |
| } | |
| return writeEUN; | |
| } while (silly2--); | |
| printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n", | |
| thisVUC); | |
| return 0xffff; | |
| } | |
| static int nftl_writeblock(struct mtd_blktrans_dev *mbd, unsigned long block, | |
| char *buffer) | |
| { | |
| struct NFTLrecord *nftl = (void *)mbd; | |
| u16 writeEUN; | |
| unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1); | |
| size_t retlen; | |
| struct nftl_oob oob; | |
| writeEUN = NFTL_findwriteunit(nftl, block); | |
| if (writeEUN == BLOCK_NIL) { | |
| printk(KERN_WARNING | |
| "NFTL_writeblock(): Cannot find block to write to\n"); | |
| /* If we _still_ haven't got a block to use, we're screwed */ | |
| return 1; | |
| } | |
| memset(&oob, 0xff, sizeof(struct nftl_oob)); | |
| oob.b.Status = oob.b.Status1 = SECTOR_USED; | |
| nftl_write(nftl->mbd.mtd, (writeEUN * nftl->EraseSize) + blockofs, | |
| 512, &retlen, (char *)buffer, (char *)&oob); | |
| return 0; | |
| } | |
| #endif /* CONFIG_NFTL_RW */ | |
| static int nftl_readblock(struct mtd_blktrans_dev *mbd, unsigned long block, | |
| char *buffer) | |
| { | |
| struct NFTLrecord *nftl = (void *)mbd; | |
| struct mtd_info *mtd = nftl->mbd.mtd; | |
| u16 lastgoodEUN; | |
| u16 thisEUN = nftl->EUNtable[block / (nftl->EraseSize / 512)]; | |
| unsigned long blockofs = (block * 512) & (nftl->EraseSize - 1); | |
| unsigned int status; | |
| int silly = MAX_LOOPS; | |
| size_t retlen; | |
| struct nftl_bci bci; | |
| lastgoodEUN = BLOCK_NIL; | |
| if (thisEUN != BLOCK_NIL) { | |
| while (thisEUN < nftl->nb_blocks) { | |
| if (nftl_read_oob(mtd, (thisEUN * nftl->EraseSize) + | |
| blockofs, 8, &retlen, | |
| (char *)&bci) < 0) | |
| status = SECTOR_IGNORE; | |
| else | |
| status = bci.Status | bci.Status1; | |
| switch (status) { | |
| case SECTOR_FREE: | |
| /* no modification of a sector should follow a free sector */ | |
| goto the_end; | |
| case SECTOR_DELETED: | |
| lastgoodEUN = BLOCK_NIL; | |
| break; | |
| case SECTOR_USED: | |
| lastgoodEUN = thisEUN; | |
| break; | |
| case SECTOR_IGNORE: | |
| break; | |
| default: | |
| printk("Unknown status for block %ld in EUN %d: %x\n", | |
| block, thisEUN, status); | |
| break; | |
| } | |
| if (!silly--) { | |
| printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%lx\n", | |
| block / (nftl->EraseSize / 512)); | |
| return 1; | |
| } | |
| thisEUN = nftl->ReplUnitTable[thisEUN]; | |
| } | |
| } | |
| the_end: | |
| if (lastgoodEUN == BLOCK_NIL) { | |
| /* the requested block is not on the media, return all 0x00 */ | |
| memset(buffer, 0, 512); | |
| } else { | |
| loff_t ptr = (lastgoodEUN * nftl->EraseSize) + blockofs; | |
| size_t retlen; | |
| int res = mtd->read(mtd, ptr, 512, &retlen, buffer); | |
| if (res < 0 && res != -EUCLEAN) | |
| return -EIO; | |
| } | |
| return 0; | |
| } | |
| static int nftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo) | |
| { | |
| struct NFTLrecord *nftl = (void *)dev; | |
| geo->heads = nftl->heads; | |
| geo->sectors = nftl->sectors; | |
| geo->cylinders = nftl->cylinders; | |
| return 0; | |
| } | |
| /**************************************************************************** | |
| * | |
| * Module stuff | |
| * | |
| ****************************************************************************/ | |
| static struct mtd_blktrans_ops nftl_tr = { | |
| .name = "nftl", | |
| .major = NFTL_MAJOR, | |
| .part_bits = NFTL_PARTN_BITS, | |
| .blksize = 512, | |
| .getgeo = nftl_getgeo, | |
| .readsect = nftl_readblock, | |
| #ifdef CONFIG_NFTL_RW | |
| .writesect = nftl_writeblock, | |
| #endif | |
| .add_mtd = nftl_add_mtd, | |
| .remove_dev = nftl_remove_dev, | |
| .owner = THIS_MODULE, | |
| }; | |
| extern char nftlmountrev[]; | |
| static int __init init_nftl(void) | |
| { | |
| printk(KERN_INFO "NFTL driver: nftlcore.c $Revision: 1.98 $, nftlmount.c %s\n", nftlmountrev); | |
| return register_mtd_blktrans(&nftl_tr); | |
| } | |
| static void __exit cleanup_nftl(void) | |
| { | |
| deregister_mtd_blktrans(&nftl_tr); | |
| } | |
| module_init(init_nftl); | |
| module_exit(cleanup_nftl); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>, Fabrice Bellard <fabrice.bellard@netgem.com> et al."); | |
| MODULE_DESCRIPTION("Support code for NAND Flash Translation Layer, used on M-Systems DiskOnChip 2000 and Millennium"); |