| # | |
| # PCCARD (PCMCIA/CardBus) bus subsystem configuration | |
| # | |
| menu "PCCARD (PCMCIA/CardBus) support" | |
| config PCCARD | |
| tristate "PCCard (PCMCIA/CardBus) support" | |
| depends on HOTPLUG | |
| ---help--- | |
| Say Y here if you want to attach PCMCIA- or PC-cards to your Linux | |
| computer. These are credit-card size devices such as network cards, | |
| modems or hard drives often used with laptops computers. There are | |
| actually two varieties of these cards: 16 bit PCMCIA and 32 bit | |
| CardBus cards. | |
| To compile this driver as modules, choose M here: the | |
| module will be called pcmcia_core. | |
| if PCCARD | |
| config PCMCIA_DEBUG | |
| bool "Enable PCCARD debugging" | |
| help | |
| Say Y here to enable PCMCIA subsystem debugging. You | |
| will need to choose the debugging level either via the | |
| kernel command line, or module options depending whether | |
| you build the PCMCIA as modules. | |
| The kernel command line options are: | |
| pcmcia_core.pc_debug=N | |
| pcmcia.pc_debug=N | |
| sa11xx_core.pc_debug=N | |
| The module option is called pc_debug=N | |
| In all the above examples, N is the debugging verbosity | |
| level. | |
| config PCMCIA | |
| tristate "16-bit PCMCIA support" | |
| select CRC32 | |
| default y | |
| ---help--- | |
| This option enables support for 16-bit PCMCIA cards. Most older | |
| PC-cards are such 16-bit PCMCIA cards, so unless you know you're | |
| only using 32-bit CardBus cards, say Y or M here. | |
| To use 16-bit PCMCIA cards, you will need supporting software in | |
| most cases. (see the file <file:Documentation/Changes> for | |
| location and details). | |
| To compile this driver as modules, choose M here: the | |
| module will be called pcmcia. | |
| If unsure, say Y. | |
| config PCMCIA_LOAD_CIS | |
| bool "Load CIS updates from userspace (EXPERIMENTAL)" | |
| depends on PCMCIA && EXPERIMENTAL | |
| select FW_LOADER | |
| default y | |
| help | |
| Some PCMCIA cards require an updated Card Information Structure (CIS) | |
| to be loaded from userspace to work correctly. If you say Y here, | |
| and your userspace is arranged correctly, this will be loaded | |
| automatically using the in-kernel firmware loader and the hotplug | |
| subsystem, instead of relying on cardmgr from pcmcia-cs to do so. | |
| If unsure, say Y. | |
| config PCMCIA_IOCTL | |
| bool "PCMCIA control ioctl (obsolete)" | |
| depends on PCMCIA | |
| default y | |
| help | |
| If you say Y here, the deprecated ioctl interface to the PCMCIA | |
| subsystem will be built. It is needed by cardmgr and cardctl | |
| (pcmcia-cs) to function properly. | |
| You should use the new pcmciautils package instead (see | |
| <file:Documentation/Changes> for location and details). | |
| If unsure, say Y. | |
| config CARDBUS | |
| bool "32-bit CardBus support" | |
| depends on PCI | |
| default y | |
| ---help--- | |
| CardBus is a bus mastering architecture for PC-cards, which allows | |
| for 32 bit PC-cards (the original PCMCIA standard specifies only | |
| a 16 bit wide bus). Many newer PC-cards are actually CardBus cards. | |
| To use 32 bit PC-cards, you also need a CardBus compatible host | |
| bridge. Virtually all modern PCMCIA bridges do this, and most of | |
| them are "yenta-compatible", so say Y or M there, too. | |
| If unsure, say Y. | |
| comment "PC-card bridges" | |
| config YENTA | |
| tristate "CardBus yenta-compatible bridge support" | |
| depends on PCI | |
| select CARDBUS if !EMBEDDED | |
| select PCCARD_NONSTATIC | |
| ---help--- | |
| This option enables support for CardBus host bridges. Virtually | |
| all modern PCMCIA bridges are CardBus compatible. A "bridge" is | |
| the hardware inside your computer that PCMCIA cards are plugged | |
| into. | |
| To compile this driver as modules, choose M here: the | |
| module will be called yenta_socket. | |
| If unsure, say Y. | |
| config YENTA_O2 | |
| default y | |
| bool "Special initialization for O2Micro bridges" if EMBEDDED | |
| depends on YENTA | |
| config YENTA_RICOH | |
| default y | |
| bool "Special initialization for Ricoh bridges" if EMBEDDED | |
| depends on YENTA | |
| config YENTA_TI | |
| default y | |
| bool "Special initialization for TI and EnE bridges" if EMBEDDED | |
| depends on YENTA | |
| config YENTA_ENE_TUNE | |
| default y | |
| bool "Auto-tune EnE bridges for CB cards" if EMBEDDED | |
| depends on YENTA_TI && CARDBUS | |
| config YENTA_TOSHIBA | |
| default y | |
| bool "Special initialization for Toshiba ToPIC bridges" if EMBEDDED | |
| depends on YENTA | |
| config PD6729 | |
| tristate "Cirrus PD6729 compatible bridge support" | |
| depends on PCMCIA && PCI | |
| select PCCARD_NONSTATIC | |
| help | |
| This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge | |
| device, found in some older laptops and PCMCIA card readers. | |
| config I82092 | |
| tristate "i82092 compatible bridge support" | |
| depends on PCMCIA && PCI | |
| select PCCARD_NONSTATIC | |
| help | |
| This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device, | |
| found in some older laptops and more commonly in evaluation boards for the | |
| chip. | |
| config I82365 | |
| tristate "i82365 compatible bridge support" | |
| depends on PCMCIA && ISA | |
| select PCCARD_NONSTATIC | |
| help | |
| Say Y here to include support for ISA-bus PCMCIA host bridges that | |
| are register compatible with the Intel i82365. These are found on | |
| older laptops and ISA-bus card readers for desktop systems. A | |
| "bridge" is the hardware inside your computer that PCMCIA cards are | |
| plugged into. If unsure, say N. | |
| config TCIC | |
| tristate "Databook TCIC host bridge support" | |
| depends on PCMCIA && ISA | |
| select PCCARD_NONSTATIC | |
| help | |
| Say Y here to include support for the Databook TCIC family of PCMCIA | |
| host bridges. These are only found on a handful of old systems. | |
| "Bridge" is the name used for the hardware inside your computer that | |
| PCMCIA cards are plugged into. If unsure, say N. | |
| config PCMCIA_M8XX | |
| tristate "MPC8xx PCMCIA support" | |
| depends on PCMCIA && PPC && 8xx | |
| select PCCARD_IODYN | |
| select PCCARD_NONSTATIC | |
| help | |
| Say Y here to include support for PowerPC 8xx series PCMCIA | |
| controller. | |
| This driver is also available as a module called m8xx_pcmcia. | |
| config HD64465_PCMCIA | |
| tristate "HD64465 host bridge support" | |
| depends on HD64465 && PCMCIA | |
| config PCMCIA_AU1X00 | |
| tristate "Au1x00 pcmcia support" | |
| depends on SOC_AU1X00 && PCMCIA | |
| config PCMCIA_SA1100 | |
| tristate "SA1100 support" | |
| depends on ARM && ARCH_SA1100 && PCMCIA | |
| help | |
| Say Y here to include support for SA11x0-based PCMCIA or CF | |
| sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/ | |
| Xscale(R) embedded machines. | |
| This driver is also available as a module called sa1100_cs. | |
| config PCMCIA_SA1111 | |
| tristate "SA1111 support" | |
| depends on ARM && ARCH_SA1100 && SA1111 && PCMCIA | |
| help | |
| Say Y here to include support for SA1111-based PCMCIA or CF | |
| sockets, found on the Jornada 720, Graphicsmaster and other | |
| StrongARM(R)/Xscale(R) embedded machines. | |
| This driver is also available as a module called sa1111_cs. | |
| config PCMCIA_PXA2XX | |
| tristate "PXA2xx support" | |
| depends on ARM && ARCH_PXA && PCMCIA | |
| help | |
| Say Y here to include support for the PXA2xx PCMCIA controller | |
| config PCMCIA_PROBE | |
| bool | |
| default y if ISA && !ARCH_SA1100 && !ARCH_CLPS711X && !PARISC | |
| config M32R_PCC | |
| bool "M32R PCMCIA I/F" | |
| depends on M32R && CHIP_M32700 && PCMCIA | |
| select PCCARD_NONSTATIC | |
| help | |
| Say Y here to use the M32R PCMCIA controller. | |
| config M32R_CFC | |
| bool "M32R CF I/F Controller" | |
| depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT) | |
| select PCCARD_NONSTATIC | |
| help | |
| Say Y here to use the M32R CompactFlash controller. | |
| config M32R_CFC_NUM | |
| int "M32R CF I/F number" | |
| depends on M32R_CFC | |
| default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT | |
| help | |
| Set the number of M32R CF slots. | |
| config PCMCIA_VRC4171 | |
| tristate "NEC VRC4171 Card Controllers support" | |
| depends on CPU_VR41XX && ISA && PCMCIA | |
| config PCMCIA_VRC4173 | |
| tristate "NEC VRC4173 CARDU support" | |
| depends on CPU_VR41XX && PCI && PCMCIA | |
| config OMAP_CF | |
| tristate "OMAP CompactFlash Controller" | |
| depends on PCMCIA && ARCH_OMAP16XX | |
| help | |
| Say Y here to support the CompactFlash controller on OMAP. | |
| Note that this doesn't support "True IDE" mode. | |
| config AT91_CF | |
| tristate "AT91 CompactFlash Controller" | |
| depends on PCMCIA && ARCH_AT91RM9200 | |
| help | |
| Say Y here to support the CompactFlash controller on AT91 chips. | |
| Or choose M to compile the driver as a module named "at91_cf". | |
| config PCCARD_NONSTATIC | |
| tristate | |
| config PCCARD_IODYN | |
| bool | |
| endif # PCCARD | |
| endmenu |