| /* | |
| * linux/include/asm-arm/arch-omap/hardware.h | |
| * | |
| * Hardware definitions for TI OMAP processors and boards | |
| * | |
| * NOTE: Please put device driver specific defines into a separate header | |
| * file for each driver. | |
| * | |
| * Copyright (C) 2001 RidgeRun, Inc. | |
| * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com> | |
| * | |
| * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com> | |
| * and Dirk Behme <dirk.behme@de.bosch.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN | |
| * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, | |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT | |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF | |
| * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON | |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF | |
| * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * You should have received a copy of the GNU General Public License along | |
| * with this program; if not, write to the Free Software Foundation, Inc., | |
| * 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #ifndef __ASM_ARCH_OMAP_HARDWARE_H | |
| #define __ASM_ARCH_OMAP_HARDWARE_H | |
| #include <asm/sizes.h> | |
| #ifndef __ASSEMBLER__ | |
| #include <asm/types.h> | |
| #include <asm/arch/cpu.h> | |
| #endif | |
| #include <asm/arch/io.h> | |
| #include <asm/arch/serial.h> | |
| /* | |
| * --------------------------------------------------------------------------- | |
| * Common definitions for all OMAP processors | |
| * NOTE: Put all processor or board specific parts to the special header | |
| * files. | |
| * --------------------------------------------------------------------------- | |
| */ | |
| /* | |
| * ---------------------------------------------------------------------------- | |
| * Timers | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #define OMAP_MPU_TIMER1_BASE (0xfffec500) | |
| #define OMAP_MPU_TIMER2_BASE (0xfffec600) | |
| #define OMAP_MPU_TIMER3_BASE (0xfffec700) | |
| #define MPU_TIMER_FREE (1 << 6) | |
| #define MPU_TIMER_CLOCK_ENABLE (1 << 5) | |
| #define MPU_TIMER_AR (1 << 1) | |
| #define MPU_TIMER_ST (1 << 0) | |
| /* | |
| * ---------------------------------------------------------------------------- | |
| * Clocks | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #define CLKGEN_REG_BASE (0xfffece00) | |
| #define ARM_CKCTL (CLKGEN_REG_BASE + 0x0) | |
| #define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4) | |
| #define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8) | |
| #define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC) | |
| #define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10) | |
| #define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14) | |
| #define ARM_SYSST (CLKGEN_REG_BASE + 0x18) | |
| #define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24) | |
| #define CK_RATEF 1 | |
| #define CK_IDLEF 2 | |
| #define CK_ENABLEF 4 | |
| #define CK_SELECTF 8 | |
| #define SETARM_IDLE_SHIFT | |
| /* DPLL control registers */ | |
| #define DPLL_CTL (0xfffecf00) | |
| /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */ | |
| #define DSP_CONFIG_REG_BASE (0xe1008000) | |
| #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0) | |
| #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4) | |
| #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8) | |
| #define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14) | |
| /* | |
| * --------------------------------------------------------------------------- | |
| * UPLD | |
| * --------------------------------------------------------------------------- | |
| */ | |
| #define ULPD_REG_BASE (0xfffe0800) | |
| #define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14) | |
| #define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24) | |
| #define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30) | |
| # define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */ | |
| # define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */ | |
| #define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34) | |
| # define SOFT_UDC_REQ (1 << 4) | |
| # define SOFT_USB_CLK_REQ (1 << 3) | |
| # define SOFT_DPLL_REQ (1 << 0) | |
| #define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c) | |
| #define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40) | |
| #define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c) | |
| #define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50) | |
| #define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68) | |
| # define DIS_MMC2_DPLL_REQ (1 << 11) | |
| # define DIS_MMC1_DPLL_REQ (1 << 10) | |
| # define DIS_UART3_DPLL_REQ (1 << 9) | |
| # define DIS_UART2_DPLL_REQ (1 << 8) | |
| # define DIS_UART1_DPLL_REQ (1 << 7) | |
| # define DIS_USB_HOST_DPLL_REQ (1 << 6) | |
| #define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74) | |
| #define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c) | |
| /* | |
| * --------------------------------------------------------------------------- | |
| * Watchdog timer | |
| * --------------------------------------------------------------------------- | |
| */ | |
| /* Watchdog timer within the OMAP3.2 gigacell */ | |
| #define OMAP_MPU_WATCHDOG_BASE (0xfffec800) | |
| #define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0) | |
| #define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) | |
| #define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4) | |
| #define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8) | |
| /* | |
| * --------------------------------------------------------------------------- | |
| * Interrupts | |
| * --------------------------------------------------------------------------- | |
| */ | |
| #ifdef CONFIG_ARCH_OMAP1 | |
| /* | |
| * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c | |
| * or something similar.. -- PFM. | |
| */ | |
| #define OMAP_IH1_BASE 0xfffecb00 | |
| #define OMAP_IH2_BASE 0xfffe0000 | |
| #define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00) | |
| #define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04) | |
| #define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10) | |
| #define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14) | |
| #define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18) | |
| #define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c) | |
| #define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c) | |
| #define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00) | |
| #define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04) | |
| #define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10) | |
| #define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14) | |
| #define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18) | |
| #define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c) | |
| #define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c) | |
| #define IRQ_ITR_REG_OFFSET 0x00 | |
| #define IRQ_MIR_REG_OFFSET 0x04 | |
| #define IRQ_SIR_IRQ_REG_OFFSET 0x10 | |
| #define IRQ_SIR_FIQ_REG_OFFSET 0x14 | |
| #define IRQ_CONTROL_REG_OFFSET 0x18 | |
| #define IRQ_ISR_REG_OFFSET 0x9c | |
| #define IRQ_ILR0_REG_OFFSET 0x1c | |
| #define IRQ_GMR_REG_OFFSET 0xa0 | |
| #endif | |
| /* | |
| * ---------------------------------------------------------------------------- | |
| * System control registers | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #define MOD_CONF_CTRL_0 0xfffe1080 | |
| #define MOD_CONF_CTRL_1 0xfffe1110 | |
| /* | |
| * ---------------------------------------------------------------------------- | |
| * Pin multiplexing registers | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #define FUNC_MUX_CTRL_0 0xfffe1000 | |
| #define FUNC_MUX_CTRL_1 0xfffe1004 | |
| #define FUNC_MUX_CTRL_2 0xfffe1008 | |
| #define COMP_MODE_CTRL_0 0xfffe100c | |
| #define FUNC_MUX_CTRL_3 0xfffe1010 | |
| #define FUNC_MUX_CTRL_4 0xfffe1014 | |
| #define FUNC_MUX_CTRL_5 0xfffe1018 | |
| #define FUNC_MUX_CTRL_6 0xfffe101C | |
| #define FUNC_MUX_CTRL_7 0xfffe1020 | |
| #define FUNC_MUX_CTRL_8 0xfffe1024 | |
| #define FUNC_MUX_CTRL_9 0xfffe1028 | |
| #define FUNC_MUX_CTRL_A 0xfffe102C | |
| #define FUNC_MUX_CTRL_B 0xfffe1030 | |
| #define FUNC_MUX_CTRL_C 0xfffe1034 | |
| #define FUNC_MUX_CTRL_D 0xfffe1038 | |
| #define PULL_DWN_CTRL_0 0xfffe1040 | |
| #define PULL_DWN_CTRL_1 0xfffe1044 | |
| #define PULL_DWN_CTRL_2 0xfffe1048 | |
| #define PULL_DWN_CTRL_3 0xfffe104c | |
| #define PULL_DWN_CTRL_4 0xfffe10ac | |
| /* OMAP-1610 specific multiplexing registers */ | |
| #define FUNC_MUX_CTRL_E 0xfffe1090 | |
| #define FUNC_MUX_CTRL_F 0xfffe1094 | |
| #define FUNC_MUX_CTRL_10 0xfffe1098 | |
| #define FUNC_MUX_CTRL_11 0xfffe109c | |
| #define FUNC_MUX_CTRL_12 0xfffe10a0 | |
| #define PU_PD_SEL_0 0xfffe10b4 | |
| #define PU_PD_SEL_1 0xfffe10b8 | |
| #define PU_PD_SEL_2 0xfffe10bc | |
| #define PU_PD_SEL_3 0xfffe10c0 | |
| #define PU_PD_SEL_4 0xfffe10c4 | |
| /* Timer32K for 1610 and 1710*/ | |
| #define OMAP_TIMER32K_BASE 0xFFFBC400 | |
| /* | |
| * --------------------------------------------------------------------------- | |
| * TIPB bus interface | |
| * --------------------------------------------------------------------------- | |
| */ | |
| #define TIPB_PUBLIC_CNTL_BASE 0xfffed300 | |
| #define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8) | |
| #define TIPB_PRIVATE_CNTL_BASE 0xfffeca00 | |
| #define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8) | |
| /* | |
| * ---------------------------------------------------------------------------- | |
| * MPUI interface | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #define MPUI_BASE (0xfffec900) | |
| #define MPUI_CTRL (MPUI_BASE + 0x0) | |
| #define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4) | |
| #define MPUI_DEBUG_DATA (MPUI_BASE + 0x8) | |
| #define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc) | |
| #define MPUI_STATUS_REG (MPUI_BASE + 0x10) | |
| #define MPUI_DSP_STATUS (MPUI_BASE + 0x14) | |
| #define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18) | |
| #define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c) | |
| /* | |
| * ---------------------------------------------------------------------------- | |
| * LED Pulse Generator | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #define OMAP_LPG1_BASE 0xfffbd000 | |
| #define OMAP_LPG2_BASE 0xfffbd800 | |
| #define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00) | |
| #define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04) | |
| #define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00) | |
| #define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04) | |
| /* | |
| * ---------------------------------------------------------------------------- | |
| * Pulse-Width Light | |
| * ---------------------------------------------------------------------------- | |
| */ | |
| #define OMAP_PWL_BASE 0xfffb5800 | |
| #define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00) | |
| #define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04) | |
| /* | |
| * --------------------------------------------------------------------------- | |
| * Processor specific defines | |
| * --------------------------------------------------------------------------- | |
| */ | |
| #include "omap730.h" | |
| #include "omap1510.h" | |
| #include "omap24xx.h" | |
| #include "omap16xx.h" | |
| #ifndef __ASSEMBLER__ | |
| /* | |
| * --------------------------------------------------------------------------- | |
| * Board specific defines | |
| * --------------------------------------------------------------------------- | |
| */ | |
| #ifdef CONFIG_MACH_OMAP_INNOVATOR | |
| #include "board-innovator.h" | |
| #endif | |
| #ifdef CONFIG_MACH_OMAP_H2 | |
| #include "board-h2.h" | |
| #endif | |
| #ifdef CONFIG_MACH_OMAP_PERSEUS2 | |
| #include "board-perseus2.h" | |
| #endif | |
| #ifdef CONFIG_MACH_OMAP_FSAMPLE | |
| #include "board-fsample.h" | |
| #endif | |
| #ifdef CONFIG_MACH_OMAP_H3 | |
| #include "board-h3.h" | |
| #endif | |
| #ifdef CONFIG_MACH_OMAP_H4 | |
| #include "board-h4.h" | |
| #endif | |
| #ifdef CONFIG_MACH_OMAP_APOLLON | |
| #include "board-apollon.h" | |
| #endif | |
| #ifdef CONFIG_MACH_OMAP_OSK | |
| #include "board-osk.h" | |
| #endif | |
| #ifdef CONFIG_MACH_VOICEBLUE | |
| #include "board-voiceblue.h" | |
| #endif | |
| #endif /* !__ASSEMBLER__ */ | |
| #endif /* __ASM_ARCH_OMAP_HARDWARE_H */ |