| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Parse the EFI PCDP table to locate the console device. | |
| * | |
| * (c) Copyright 2002, 2003, 2004 Hewlett-Packard Development Company, L.P. | |
| * Khalid Aziz <khalid.aziz@hp.com> | |
| * Alex Williamson <alex.williamson@hp.com> | |
| * Bjorn Helgaas <bjorn.helgaas@hp.com> | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/console.h> | |
| #include <linux/efi.h> | |
| #include <linux/serial.h> | |
| #include <linux/serial_core.h> | |
| #include <asm/vga.h> | |
| #include "pcdp.h" | |
| static int __init | |
| setup_serial_console(struct pcdp_uart *uart) | |
| { | |
| #ifdef CONFIG_SERIAL_8250_CONSOLE | |
| int mmio; | |
| static char options[64], *p = options; | |
| char parity; | |
| mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY); | |
| p += sprintf(p, "uart8250,%s,0x%llx", | |
| mmio ? "mmio" : "io", uart->addr.address); | |
| if (uart->baud) { | |
| p += sprintf(p, ",%llu", uart->baud); | |
| if (uart->bits) { | |
| switch (uart->parity) { | |
| case 0x2: parity = 'e'; break; | |
| case 0x3: parity = 'o'; break; | |
| default: parity = 'n'; | |
| } | |
| p += sprintf(p, "%c%d", parity, uart->bits); | |
| } | |
| } | |
| add_preferred_console("uart", 8250, &options[9]); | |
| return setup_earlycon(options); | |
| #else | |
| return -ENODEV; | |
| #endif | |
| } | |
| static int __init | |
| setup_vga_console(struct pcdp_device *dev) | |
| { | |
| #if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE) | |
| u8 *if_ptr; | |
| if_ptr = ((u8 *)dev + sizeof(struct pcdp_device)); | |
| if (if_ptr[0] == PCDP_IF_PCI) { | |
| struct pcdp_if_pci if_pci; | |
| /* struct copy since ifptr might not be correctly aligned */ | |
| memcpy(&if_pci, if_ptr, sizeof(if_pci)); | |
| if (if_pci.trans & PCDP_PCI_TRANS_IOPORT) | |
| vga_console_iobase = if_pci.ioport_tra; | |
| if (if_pci.trans & PCDP_PCI_TRANS_MMIO) | |
| vga_console_membase = if_pci.mmio_tra; | |
| } | |
| if (efi_mem_type(vga_console_membase + 0xA0000) == EFI_CONVENTIONAL_MEMORY) { | |
| printk(KERN_ERR "PCDP: VGA selected, but frame buffer is not MMIO!\n"); | |
| return -ENODEV; | |
| } | |
| conswitchp = &vga_con; | |
| printk(KERN_INFO "PCDP: VGA console\n"); | |
| return 0; | |
| #else | |
| return -ENODEV; | |
| #endif | |
| } | |
| extern unsigned long hcdp_phys; | |
| int __init | |
| efi_setup_pcdp_console(char *cmdline) | |
| { | |
| struct pcdp *pcdp; | |
| struct pcdp_uart *uart; | |
| struct pcdp_device *dev, *end; | |
| int i, serial = 0; | |
| int rc = -ENODEV; | |
| if (hcdp_phys == EFI_INVALID_TABLE_ADDR) | |
| return -ENODEV; | |
| pcdp = early_memremap(hcdp_phys, 4096); | |
| printk(KERN_INFO "PCDP: v%d at 0x%lx\n", pcdp->rev, hcdp_phys); | |
| if (strstr(cmdline, "console=hcdp")) { | |
| if (pcdp->rev < 3) | |
| serial = 1; | |
| } else if (strstr(cmdline, "console=")) { | |
| printk(KERN_INFO "Explicit \"console=\"; ignoring PCDP\n"); | |
| goto out; | |
| } | |
| if (pcdp->rev < 3 && efi_uart_console_only()) | |
| serial = 1; | |
| for (i = 0, uart = pcdp->uart; i < pcdp->num_uarts; i++, uart++) { | |
| if (uart->flags & PCDP_UART_PRIMARY_CONSOLE || serial) { | |
| if (uart->type == PCDP_CONSOLE_UART) { | |
| rc = setup_serial_console(uart); | |
| goto out; | |
| } | |
| } | |
| } | |
| end = (struct pcdp_device *) ((u8 *) pcdp + pcdp->length); | |
| for (dev = (struct pcdp_device *) (pcdp->uart + pcdp->num_uarts); | |
| dev < end; | |
| dev = (struct pcdp_device *) ((u8 *) dev + dev->length)) { | |
| if (dev->flags & PCDP_PRIMARY_CONSOLE) { | |
| if (dev->type == PCDP_CONSOLE_VGA) { | |
| rc = setup_vga_console(dev); | |
| goto out; | |
| } | |
| } | |
| } | |
| out: | |
| early_memunmap(pcdp, 4096); | |
| return rc; | |
| } |