| // SPDX-License-Identifier: GPL-2.0-only | 
 | /* | 
 |  *      Intel Atom E6xx Watchdog driver | 
 |  * | 
 |  *      Copyright (C) 2011 Alexander Stein | 
 |  *                <alexander.stein@systec-electronic.com> | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/io.h> | 
 | #include <linux/kernel.h> | 
 | #include <linux/types.h> | 
 | #include <linux/watchdog.h> | 
 | #include <linux/seq_file.h> | 
 | #include <linux/debugfs.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/spinlock.h> | 
 |  | 
 | #define DRIVER_NAME "ie6xx_wdt" | 
 |  | 
 | #define PV1	0x00 | 
 | #define PV2	0x04 | 
 |  | 
 | #define RR0	0x0c | 
 | #define RR1	0x0d | 
 | #define WDT_RELOAD	0x01 | 
 | #define WDT_TOUT	0x02 | 
 |  | 
 | #define WDTCR	0x10 | 
 | #define WDT_PRE_SEL	0x04 | 
 | #define WDT_RESET_SEL	0x08 | 
 | #define WDT_RESET_EN	0x10 | 
 | #define WDT_TOUT_EN	0x20 | 
 |  | 
 | #define DCR	0x14 | 
 |  | 
 | #define WDTLR	0x18 | 
 | #define WDT_LOCK	0x01 | 
 | #define WDT_ENABLE	0x02 | 
 | #define WDT_TOUT_CNF	0x03 | 
 |  | 
 | #define MIN_TIME	1 | 
 | #define MAX_TIME	(10 * 60) /* 10 minutes */ | 
 | #define DEFAULT_TIME	60 | 
 |  | 
 | static unsigned int timeout = DEFAULT_TIME; | 
 | module_param(timeout, uint, 0); | 
 | MODULE_PARM_DESC(timeout, | 
 | 		"Default Watchdog timer setting (" | 
 | 		__MODULE_STRING(DEFAULT_TIME) "s)." | 
 | 		"The range is from 1 to 600"); | 
 |  | 
 | static bool nowayout = WATCHDOG_NOWAYOUT; | 
 | module_param(nowayout, bool, 0); | 
 | MODULE_PARM_DESC(nowayout, | 
 | 	"Watchdog cannot be stopped once started (default=" | 
 | 		__MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | 
 |  | 
 | static u8 resetmode = 0x10; | 
 | module_param(resetmode, byte, 0); | 
 | MODULE_PARM_DESC(resetmode, | 
 | 	"Resetmode bits: 0x08 warm reset (cold reset otherwise), " | 
 | 	"0x10 reset enable, 0x20 disable toggle GPIO[4] (default=0x10)"); | 
 |  | 
 | static struct { | 
 | 	unsigned short sch_wdtba; | 
 | 	spinlock_t unlock_sequence; | 
 | #ifdef CONFIG_DEBUG_FS | 
 | 	struct dentry *debugfs; | 
 | #endif | 
 | } ie6xx_wdt_data; | 
 |  | 
 | /* | 
 |  * This is needed to write to preload and reload registers | 
 |  * struct ie6xx_wdt_data.unlock_sequence must be used | 
 |  * to prevent sequence interrupts | 
 |  */ | 
 | static void ie6xx_wdt_unlock_registers(void) | 
 | { | 
 | 	outb(0x80, ie6xx_wdt_data.sch_wdtba + RR0); | 
 | 	outb(0x86, ie6xx_wdt_data.sch_wdtba + RR0); | 
 | } | 
 |  | 
 | static int ie6xx_wdt_ping(struct watchdog_device *wdd) | 
 | { | 
 | 	spin_lock(&ie6xx_wdt_data.unlock_sequence); | 
 | 	ie6xx_wdt_unlock_registers(); | 
 | 	outb(WDT_RELOAD, ie6xx_wdt_data.sch_wdtba + RR1); | 
 | 	spin_unlock(&ie6xx_wdt_data.unlock_sequence); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ie6xx_wdt_set_timeout(struct watchdog_device *wdd, unsigned int t) | 
 | { | 
 | 	u32 preload; | 
 | 	u64 clock; | 
 | 	u8 wdtcr; | 
 |  | 
 | 	/* Watchdog clock is PCI Clock (33MHz) */ | 
 | 	clock = 33000000; | 
 | 	/* and the preload value is loaded into [34:15] of the down counter */ | 
 | 	preload = (t * clock) >> 15; | 
 | 	/* | 
 | 	 * Manual states preload must be one less. | 
 | 	 * Does not wrap as t is at least 1 | 
 | 	 */ | 
 | 	preload -= 1; | 
 |  | 
 | 	spin_lock(&ie6xx_wdt_data.unlock_sequence); | 
 |  | 
 | 	/* Set ResetMode & Enable prescaler for range 10ms to 10 min */ | 
 | 	wdtcr = resetmode & 0x38; | 
 | 	outb(wdtcr, ie6xx_wdt_data.sch_wdtba + WDTCR); | 
 |  | 
 | 	ie6xx_wdt_unlock_registers(); | 
 | 	outl(0, ie6xx_wdt_data.sch_wdtba + PV1); | 
 |  | 
 | 	ie6xx_wdt_unlock_registers(); | 
 | 	outl(preload, ie6xx_wdt_data.sch_wdtba + PV2); | 
 |  | 
 | 	ie6xx_wdt_unlock_registers(); | 
 | 	outb(WDT_RELOAD | WDT_TOUT, ie6xx_wdt_data.sch_wdtba + RR1); | 
 |  | 
 | 	spin_unlock(&ie6xx_wdt_data.unlock_sequence); | 
 |  | 
 | 	wdd->timeout = t; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ie6xx_wdt_start(struct watchdog_device *wdd) | 
 | { | 
 | 	ie6xx_wdt_set_timeout(wdd, wdd->timeout); | 
 |  | 
 | 	/* Enable the watchdog timer */ | 
 | 	spin_lock(&ie6xx_wdt_data.unlock_sequence); | 
 | 	outb(WDT_ENABLE, ie6xx_wdt_data.sch_wdtba + WDTLR); | 
 | 	spin_unlock(&ie6xx_wdt_data.unlock_sequence); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int ie6xx_wdt_stop(struct watchdog_device *wdd) | 
 | { | 
 | 	if (inb(ie6xx_wdt_data.sch_wdtba + WDTLR) & WDT_LOCK) | 
 | 		return -1; | 
 |  | 
 | 	/* Disable the watchdog timer */ | 
 | 	spin_lock(&ie6xx_wdt_data.unlock_sequence); | 
 | 	outb(0, ie6xx_wdt_data.sch_wdtba + WDTLR); | 
 | 	spin_unlock(&ie6xx_wdt_data.unlock_sequence); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct watchdog_info ie6xx_wdt_info = { | 
 | 	.identity =	"Intel Atom E6xx Watchdog", | 
 | 	.options =	WDIOF_SETTIMEOUT | | 
 | 			WDIOF_MAGICCLOSE | | 
 | 			WDIOF_KEEPALIVEPING, | 
 | }; | 
 |  | 
 | static const struct watchdog_ops ie6xx_wdt_ops = { | 
 | 	.owner =	THIS_MODULE, | 
 | 	.start =	ie6xx_wdt_start, | 
 | 	.stop =		ie6xx_wdt_stop, | 
 | 	.ping =		ie6xx_wdt_ping, | 
 | 	.set_timeout =	ie6xx_wdt_set_timeout, | 
 | }; | 
 |  | 
 | static struct watchdog_device ie6xx_wdt_dev = { | 
 | 	.info =		&ie6xx_wdt_info, | 
 | 	.ops =		&ie6xx_wdt_ops, | 
 | 	.min_timeout =	MIN_TIME, | 
 | 	.max_timeout =	MAX_TIME, | 
 | }; | 
 |  | 
 | #ifdef CONFIG_DEBUG_FS | 
 |  | 
 | static int ie6xx_wdt_show(struct seq_file *s, void *unused) | 
 | { | 
 | 	seq_printf(s, "PV1   = 0x%08x\n", | 
 | 		inl(ie6xx_wdt_data.sch_wdtba + PV1)); | 
 | 	seq_printf(s, "PV2   = 0x%08x\n", | 
 | 		inl(ie6xx_wdt_data.sch_wdtba + PV2)); | 
 | 	seq_printf(s, "RR    = 0x%08x\n", | 
 | 		inw(ie6xx_wdt_data.sch_wdtba + RR0)); | 
 | 	seq_printf(s, "WDTCR = 0x%08x\n", | 
 | 		inw(ie6xx_wdt_data.sch_wdtba + WDTCR)); | 
 | 	seq_printf(s, "DCR   = 0x%08x\n", | 
 | 		inl(ie6xx_wdt_data.sch_wdtba + DCR)); | 
 | 	seq_printf(s, "WDTLR = 0x%08x\n", | 
 | 		inw(ie6xx_wdt_data.sch_wdtba + WDTLR)); | 
 |  | 
 | 	seq_printf(s, "\n"); | 
 | 	return 0; | 
 | } | 
 |  | 
 | DEFINE_SHOW_ATTRIBUTE(ie6xx_wdt); | 
 |  | 
 | static void ie6xx_wdt_debugfs_init(void) | 
 | { | 
 | 	/* /sys/kernel/debug/ie6xx_wdt */ | 
 | 	ie6xx_wdt_data.debugfs = debugfs_create_file("ie6xx_wdt", | 
 | 		S_IFREG | S_IRUGO, NULL, NULL, &ie6xx_wdt_fops); | 
 | } | 
 |  | 
 | static void ie6xx_wdt_debugfs_exit(void) | 
 | { | 
 | 	debugfs_remove(ie6xx_wdt_data.debugfs); | 
 | } | 
 |  | 
 | #else | 
 | static void ie6xx_wdt_debugfs_init(void) | 
 | { | 
 | } | 
 |  | 
 | static void ie6xx_wdt_debugfs_exit(void) | 
 | { | 
 | } | 
 | #endif | 
 |  | 
 | static int ie6xx_wdt_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct resource *res; | 
 | 	u8 wdtlr; | 
 | 	int ret; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_IO, 0); | 
 | 	if (!res) | 
 | 		return -ENODEV; | 
 |  | 
 | 	if (!request_region(res->start, resource_size(res), pdev->name)) { | 
 | 		dev_err(&pdev->dev, "Watchdog region 0x%llx already in use!\n", | 
 | 			(u64)res->start); | 
 | 		return -EBUSY; | 
 | 	} | 
 |  | 
 | 	ie6xx_wdt_data.sch_wdtba = res->start; | 
 | 	dev_dbg(&pdev->dev, "WDT = 0x%X\n", ie6xx_wdt_data.sch_wdtba); | 
 |  | 
 | 	ie6xx_wdt_dev.timeout = timeout; | 
 | 	watchdog_set_nowayout(&ie6xx_wdt_dev, nowayout); | 
 | 	ie6xx_wdt_dev.parent = &pdev->dev; | 
 |  | 
 | 	spin_lock_init(&ie6xx_wdt_data.unlock_sequence); | 
 |  | 
 | 	wdtlr = inb(ie6xx_wdt_data.sch_wdtba + WDTLR); | 
 | 	if (wdtlr & WDT_LOCK) | 
 | 		dev_warn(&pdev->dev, | 
 | 			"Watchdog Timer is Locked (Reg=0x%x)\n", wdtlr); | 
 |  | 
 | 	ie6xx_wdt_debugfs_init(); | 
 |  | 
 | 	ret = watchdog_register_device(&ie6xx_wdt_dev); | 
 | 	if (ret) | 
 | 		goto misc_register_error; | 
 |  | 
 | 	return 0; | 
 |  | 
 | misc_register_error: | 
 | 	ie6xx_wdt_debugfs_exit(); | 
 | 	release_region(res->start, resource_size(res)); | 
 | 	ie6xx_wdt_data.sch_wdtba = 0; | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int ie6xx_wdt_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct resource *res; | 
 |  | 
 | 	res = platform_get_resource(pdev, IORESOURCE_IO, 0); | 
 | 	ie6xx_wdt_stop(NULL); | 
 | 	watchdog_unregister_device(&ie6xx_wdt_dev); | 
 | 	ie6xx_wdt_debugfs_exit(); | 
 | 	release_region(res->start, resource_size(res)); | 
 | 	ie6xx_wdt_data.sch_wdtba = 0; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct platform_driver ie6xx_wdt_driver = { | 
 | 	.probe		= ie6xx_wdt_probe, | 
 | 	.remove		= ie6xx_wdt_remove, | 
 | 	.driver		= { | 
 | 		.name	= DRIVER_NAME, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init ie6xx_wdt_init(void) | 
 | { | 
 | 	/* Check boot parameters to verify that their initial values */ | 
 | 	/* are in range. */ | 
 | 	if ((timeout < MIN_TIME) || | 
 | 	    (timeout > MAX_TIME)) { | 
 | 		pr_err("Watchdog timer: value of timeout %d (dec) " | 
 | 		  "is out of range from %d to %d (dec)\n", | 
 | 		  timeout, MIN_TIME, MAX_TIME); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return platform_driver_register(&ie6xx_wdt_driver); | 
 | } | 
 |  | 
 | static void __exit ie6xx_wdt_exit(void) | 
 | { | 
 | 	platform_driver_unregister(&ie6xx_wdt_driver); | 
 | } | 
 |  | 
 | late_initcall(ie6xx_wdt_init); | 
 | module_exit(ie6xx_wdt_exit); | 
 |  | 
 | MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>"); | 
 | MODULE_DESCRIPTION("Intel Atom E6xx Watchdog Device Driver"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS("platform:" DRIVER_NAME); |