| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * | |
| * Shared code by both skx_edac and i10nm_edac. Originally split out | |
| * from the skx_edac driver. | |
| * | |
| * This file is linked into both skx_edac and i10nm_edac drivers. In | |
| * order to avoid link errors, this file must be like a pure library | |
| * without including symbols and defines which would otherwise conflict, | |
| * when linked once into a module and into a built-in object, at the | |
| * same time. For example, __this_module symbol references when that | |
| * file is being linked into a built-in object. | |
| * | |
| * Copyright (c) 2018, Intel Corporation. | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/dmi.h> | |
| #include <linux/adxl.h> | |
| #include <acpi/nfit.h> | |
| #include <asm/mce.h> | |
| #include "edac_module.h" | |
| #include "skx_common.h" | |
| static const char * const component_names[] = { | |
| [INDEX_SOCKET] = "ProcessorSocketId", | |
| [INDEX_MEMCTRL] = "MemoryControllerId", | |
| [INDEX_CHANNEL] = "ChannelId", | |
| [INDEX_DIMM] = "DimmSlotId", | |
| [INDEX_NM_MEMCTRL] = "NmMemoryControllerId", | |
| [INDEX_NM_CHANNEL] = "NmChannelId", | |
| [INDEX_NM_DIMM] = "NmDimmSlotId", | |
| }; | |
| static int component_indices[ARRAY_SIZE(component_names)]; | |
| static int adxl_component_count; | |
| static const char * const *adxl_component_names; | |
| static u64 *adxl_values; | |
| static char *adxl_msg; | |
| static unsigned long adxl_nm_bitmap; | |
| static char skx_msg[MSG_SIZE]; | |
| static skx_decode_f skx_decode; | |
| static skx_show_retry_log_f skx_show_retry_rd_err_log; | |
| static u64 skx_tolm, skx_tohm; | |
| static LIST_HEAD(dev_edac_list); | |
| static bool skx_mem_cfg_2lm; | |
| int __init skx_adxl_get(void) | |
| { | |
| const char * const *names; | |
| int i, j; | |
| names = adxl_get_component_names(); | |
| if (!names) { | |
| skx_printk(KERN_NOTICE, "No firmware support for address translation.\n"); | |
| return -ENODEV; | |
| } | |
| for (i = 0; i < INDEX_MAX; i++) { | |
| for (j = 0; names[j]; j++) { | |
| if (!strcmp(component_names[i], names[j])) { | |
| component_indices[i] = j; | |
| if (i >= INDEX_NM_FIRST) | |
| adxl_nm_bitmap |= 1 << i; | |
| break; | |
| } | |
| } | |
| if (!names[j] && i < INDEX_NM_FIRST) | |
| goto err; | |
| } | |
| if (skx_mem_cfg_2lm) { | |
| if (!adxl_nm_bitmap) | |
| skx_printk(KERN_NOTICE, "Not enough ADXL components for 2-level memory.\n"); | |
| else | |
| edac_dbg(2, "adxl_nm_bitmap: 0x%lx\n", adxl_nm_bitmap); | |
| } | |
| adxl_component_names = names; | |
| while (*names++) | |
| adxl_component_count++; | |
| adxl_values = kcalloc(adxl_component_count, sizeof(*adxl_values), | |
| GFP_KERNEL); | |
| if (!adxl_values) { | |
| adxl_component_count = 0; | |
| return -ENOMEM; | |
| } | |
| adxl_msg = kzalloc(MSG_SIZE, GFP_KERNEL); | |
| if (!adxl_msg) { | |
| adxl_component_count = 0; | |
| kfree(adxl_values); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| err: | |
| skx_printk(KERN_ERR, "'%s' is not matched from DSM parameters: ", | |
| component_names[i]); | |
| for (j = 0; names[j]; j++) | |
| skx_printk(KERN_CONT, "%s ", names[j]); | |
| skx_printk(KERN_CONT, "\n"); | |
| return -ENODEV; | |
| } | |
| void __exit skx_adxl_put(void) | |
| { | |
| kfree(adxl_values); | |
| kfree(adxl_msg); | |
| } | |
| static bool skx_adxl_decode(struct decoded_addr *res, bool error_in_1st_level_mem) | |
| { | |
| struct skx_dev *d; | |
| int i, len = 0; | |
| if (res->addr >= skx_tohm || (res->addr >= skx_tolm && | |
| res->addr < BIT_ULL(32))) { | |
| edac_dbg(0, "Address 0x%llx out of range\n", res->addr); | |
| return false; | |
| } | |
| if (adxl_decode(res->addr, adxl_values)) { | |
| edac_dbg(0, "Failed to decode 0x%llx\n", res->addr); | |
| return false; | |
| } | |
| res->socket = (int)adxl_values[component_indices[INDEX_SOCKET]]; | |
| if (error_in_1st_level_mem) { | |
| res->imc = (adxl_nm_bitmap & BIT_NM_MEMCTRL) ? | |
| (int)adxl_values[component_indices[INDEX_NM_MEMCTRL]] : -1; | |
| res->channel = (adxl_nm_bitmap & BIT_NM_CHANNEL) ? | |
| (int)adxl_values[component_indices[INDEX_NM_CHANNEL]] : -1; | |
| res->dimm = (adxl_nm_bitmap & BIT_NM_DIMM) ? | |
| (int)adxl_values[component_indices[INDEX_NM_DIMM]] : -1; | |
| } else { | |
| res->imc = (int)adxl_values[component_indices[INDEX_MEMCTRL]]; | |
| res->channel = (int)adxl_values[component_indices[INDEX_CHANNEL]]; | |
| res->dimm = (int)adxl_values[component_indices[INDEX_DIMM]]; | |
| } | |
| if (res->imc > NUM_IMC - 1 || res->imc < 0) { | |
| skx_printk(KERN_ERR, "Bad imc %d\n", res->imc); | |
| return false; | |
| } | |
| list_for_each_entry(d, &dev_edac_list, list) { | |
| if (d->imc[0].src_id == res->socket) { | |
| res->dev = d; | |
| break; | |
| } | |
| } | |
| if (!res->dev) { | |
| skx_printk(KERN_ERR, "No device for src_id %d imc %d\n", | |
| res->socket, res->imc); | |
| return false; | |
| } | |
| for (i = 0; i < adxl_component_count; i++) { | |
| if (adxl_values[i] == ~0x0ull) | |
| continue; | |
| len += snprintf(adxl_msg + len, MSG_SIZE - len, " %s:0x%llx", | |
| adxl_component_names[i], adxl_values[i]); | |
| if (MSG_SIZE - len <= 0) | |
| break; | |
| } | |
| return true; | |
| } | |
| void skx_set_mem_cfg(bool mem_cfg_2lm) | |
| { | |
| skx_mem_cfg_2lm = mem_cfg_2lm; | |
| } | |
| void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log) | |
| { | |
| skx_decode = decode; | |
| skx_show_retry_rd_err_log = show_retry_log; | |
| } | |
| int skx_get_src_id(struct skx_dev *d, int off, u8 *id) | |
| { | |
| u32 reg; | |
| if (pci_read_config_dword(d->util_all, off, ®)) { | |
| skx_printk(KERN_ERR, "Failed to read src id\n"); | |
| return -ENODEV; | |
| } | |
| *id = GET_BITFIELD(reg, 12, 14); | |
| return 0; | |
| } | |
| int skx_get_node_id(struct skx_dev *d, u8 *id) | |
| { | |
| u32 reg; | |
| if (pci_read_config_dword(d->util_all, 0xf4, ®)) { | |
| skx_printk(KERN_ERR, "Failed to read node id\n"); | |
| return -ENODEV; | |
| } | |
| *id = GET_BITFIELD(reg, 0, 2); | |
| return 0; | |
| } | |
| static int get_width(u32 mtr) | |
| { | |
| switch (GET_BITFIELD(mtr, 8, 9)) { | |
| case 0: | |
| return DEV_X4; | |
| case 1: | |
| return DEV_X8; | |
| case 2: | |
| return DEV_X16; | |
| } | |
| return DEV_UNKNOWN; | |
| } | |
| /* | |
| * We use the per-socket device @cfg->did to count how many sockets are present, | |
| * and to detemine which PCI buses are associated with each socket. Allocate | |
| * and build the full list of all the skx_dev structures that we need here. | |
| */ | |
| int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list) | |
| { | |
| struct pci_dev *pdev, *prev; | |
| struct skx_dev *d; | |
| u32 reg; | |
| int ndev = 0; | |
| prev = NULL; | |
| for (;;) { | |
| pdev = pci_get_device(PCI_VENDOR_ID_INTEL, cfg->decs_did, prev); | |
| if (!pdev) | |
| break; | |
| ndev++; | |
| d = kzalloc(sizeof(*d), GFP_KERNEL); | |
| if (!d) { | |
| pci_dev_put(pdev); | |
| return -ENOMEM; | |
| } | |
| if (pci_read_config_dword(pdev, cfg->busno_cfg_offset, ®)) { | |
| kfree(d); | |
| pci_dev_put(pdev); | |
| skx_printk(KERN_ERR, "Failed to read bus idx\n"); | |
| return -ENODEV; | |
| } | |
| d->bus[0] = GET_BITFIELD(reg, 0, 7); | |
| d->bus[1] = GET_BITFIELD(reg, 8, 15); | |
| if (cfg->type == SKX) { | |
| d->seg = pci_domain_nr(pdev->bus); | |
| d->bus[2] = GET_BITFIELD(reg, 16, 23); | |
| d->bus[3] = GET_BITFIELD(reg, 24, 31); | |
| } else { | |
| d->seg = GET_BITFIELD(reg, 16, 23); | |
| } | |
| edac_dbg(2, "busses: 0x%x, 0x%x, 0x%x, 0x%x\n", | |
| d->bus[0], d->bus[1], d->bus[2], d->bus[3]); | |
| list_add_tail(&d->list, &dev_edac_list); | |
| prev = pdev; | |
| } | |
| if (list) | |
| *list = &dev_edac_list; | |
| return ndev; | |
| } | |
| int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm) | |
| { | |
| struct pci_dev *pdev; | |
| u32 reg; | |
| pdev = pci_get_device(PCI_VENDOR_ID_INTEL, did, NULL); | |
| if (!pdev) { | |
| edac_dbg(2, "Can't get tolm/tohm\n"); | |
| return -ENODEV; | |
| } | |
| if (pci_read_config_dword(pdev, off[0], ®)) { | |
| skx_printk(KERN_ERR, "Failed to read tolm\n"); | |
| goto fail; | |
| } | |
| skx_tolm = reg; | |
| if (pci_read_config_dword(pdev, off[1], ®)) { | |
| skx_printk(KERN_ERR, "Failed to read lower tohm\n"); | |
| goto fail; | |
| } | |
| skx_tohm = reg; | |
| if (pci_read_config_dword(pdev, off[2], ®)) { | |
| skx_printk(KERN_ERR, "Failed to read upper tohm\n"); | |
| goto fail; | |
| } | |
| skx_tohm |= (u64)reg << 32; | |
| pci_dev_put(pdev); | |
| *tolm = skx_tolm; | |
| *tohm = skx_tohm; | |
| edac_dbg(2, "tolm = 0x%llx tohm = 0x%llx\n", skx_tolm, skx_tohm); | |
| return 0; | |
| fail: | |
| pci_dev_put(pdev); | |
| return -ENODEV; | |
| } | |
| static int skx_get_dimm_attr(u32 reg, int lobit, int hibit, int add, | |
| int minval, int maxval, const char *name) | |
| { | |
| u32 val = GET_BITFIELD(reg, lobit, hibit); | |
| if (val < minval || val > maxval) { | |
| edac_dbg(2, "bad %s = %d (raw=0x%x)\n", name, val, reg); | |
| return -EINVAL; | |
| } | |
| return val + add; | |
| } | |
| #define numrank(reg) skx_get_dimm_attr(reg, 12, 13, 0, 0, 2, "ranks") | |
| #define numrow(reg) skx_get_dimm_attr(reg, 2, 4, 12, 1, 6, "rows") | |
| #define numcol(reg) skx_get_dimm_attr(reg, 0, 1, 10, 0, 2, "cols") | |
| int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm, | |
| struct skx_imc *imc, int chan, int dimmno, | |
| struct res_config *cfg) | |
| { | |
| int banks, ranks, rows, cols, npages; | |
| enum mem_type mtype; | |
| u64 size; | |
| ranks = numrank(mtr); | |
| rows = numrow(mtr); | |
| cols = imc->hbm_mc ? 6 : numcol(mtr); | |
| if (imc->hbm_mc) { | |
| banks = 32; | |
| mtype = MEM_HBM2; | |
| } else if (cfg->support_ddr5 && (amap & 0x8)) { | |
| banks = 32; | |
| mtype = MEM_DDR5; | |
| } else { | |
| banks = 16; | |
| mtype = MEM_DDR4; | |
| } | |
| /* | |
| * Compute size in 8-byte (2^3) words, then shift to MiB (2^20) | |
| */ | |
| size = ((1ull << (rows + cols + ranks)) * banks) >> (20 - 3); | |
| npages = MiB_TO_PAGES(size); | |
| edac_dbg(0, "mc#%d: channel %d, dimm %d, %lld MiB (%d pages) bank: %d, rank: %d, row: 0x%x, col: 0x%x\n", | |
| imc->mc, chan, dimmno, size, npages, | |
| banks, 1 << ranks, rows, cols); | |
| imc->chan[chan].dimms[dimmno].close_pg = GET_BITFIELD(mcmtr, 0, 0); | |
| imc->chan[chan].dimms[dimmno].bank_xor_enable = GET_BITFIELD(mcmtr, 9, 9); | |
| imc->chan[chan].dimms[dimmno].fine_grain_bank = GET_BITFIELD(amap, 0, 0); | |
| imc->chan[chan].dimms[dimmno].rowbits = rows; | |
| imc->chan[chan].dimms[dimmno].colbits = cols; | |
| dimm->nr_pages = npages; | |
| dimm->grain = 32; | |
| dimm->dtype = get_width(mtr); | |
| dimm->mtype = mtype; | |
| dimm->edac_mode = EDAC_SECDED; /* likely better than this */ | |
| if (imc->hbm_mc) | |
| snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_HBMC#%u_Chan#%u", | |
| imc->src_id, imc->lmc, chan); | |
| else | |
| snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u", | |
| imc->src_id, imc->lmc, chan, dimmno); | |
| return 1; | |
| } | |
| int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc, | |
| int chan, int dimmno, const char *mod_str) | |
| { | |
| int smbios_handle; | |
| u32 dev_handle; | |
| u16 flags; | |
| u64 size = 0; | |
| dev_handle = ACPI_NFIT_BUILD_DEVICE_HANDLE(dimmno, chan, imc->lmc, | |
| imc->src_id, 0); | |
| smbios_handle = nfit_get_smbios_id(dev_handle, &flags); | |
| if (smbios_handle == -EOPNOTSUPP) { | |
| pr_warn_once("%s: Can't find size of NVDIMM. Try enabling CONFIG_ACPI_NFIT\n", mod_str); | |
| goto unknown_size; | |
| } | |
| if (smbios_handle < 0) { | |
| skx_printk(KERN_ERR, "Can't find handle for NVDIMM ADR=0x%x\n", dev_handle); | |
| goto unknown_size; | |
| } | |
| if (flags & ACPI_NFIT_MEM_MAP_FAILED) { | |
| skx_printk(KERN_ERR, "NVDIMM ADR=0x%x is not mapped\n", dev_handle); | |
| goto unknown_size; | |
| } | |
| size = dmi_memdev_size(smbios_handle); | |
| if (size == ~0ull) | |
| skx_printk(KERN_ERR, "Can't find size for NVDIMM ADR=0x%x/SMBIOS=0x%x\n", | |
| dev_handle, smbios_handle); | |
| unknown_size: | |
| dimm->nr_pages = size >> PAGE_SHIFT; | |
| dimm->grain = 32; | |
| dimm->dtype = DEV_UNKNOWN; | |
| dimm->mtype = MEM_NVDIMM; | |
| dimm->edac_mode = EDAC_SECDED; /* likely better than this */ | |
| edac_dbg(0, "mc#%d: channel %d, dimm %d, %llu MiB (%u pages)\n", | |
| imc->mc, chan, dimmno, size >> 20, dimm->nr_pages); | |
| snprintf(dimm->label, sizeof(dimm->label), "CPU_SrcID#%u_MC#%u_Chan#%u_DIMM#%u", | |
| imc->src_id, imc->lmc, chan, dimmno); | |
| return (size == 0 || size == ~0ull) ? 0 : 1; | |
| } | |
| int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev, | |
| const char *ctl_name, const char *mod_str, | |
| get_dimm_config_f get_dimm_config, | |
| struct res_config *cfg) | |
| { | |
| struct mem_ctl_info *mci; | |
| struct edac_mc_layer layers[2]; | |
| struct skx_pvt *pvt; | |
| int rc; | |
| /* Allocate a new MC control structure */ | |
| layers[0].type = EDAC_MC_LAYER_CHANNEL; | |
| layers[0].size = NUM_CHANNELS; | |
| layers[0].is_virt_csrow = false; | |
| layers[1].type = EDAC_MC_LAYER_SLOT; | |
| layers[1].size = NUM_DIMMS; | |
| layers[1].is_virt_csrow = true; | |
| mci = edac_mc_alloc(imc->mc, ARRAY_SIZE(layers), layers, | |
| sizeof(struct skx_pvt)); | |
| if (unlikely(!mci)) | |
| return -ENOMEM; | |
| edac_dbg(0, "MC#%d: mci = %p\n", imc->mc, mci); | |
| /* Associate skx_dev and mci for future usage */ | |
| imc->mci = mci; | |
| pvt = mci->pvt_info; | |
| pvt->imc = imc; | |
| mci->ctl_name = kasprintf(GFP_KERNEL, "%s#%d IMC#%d", ctl_name, | |
| imc->node_id, imc->lmc); | |
| if (!mci->ctl_name) { | |
| rc = -ENOMEM; | |
| goto fail0; | |
| } | |
| mci->mtype_cap = MEM_FLAG_DDR4 | MEM_FLAG_NVDIMM; | |
| if (cfg->support_ddr5) | |
| mci->mtype_cap |= MEM_FLAG_DDR5; | |
| mci->edac_ctl_cap = EDAC_FLAG_NONE; | |
| mci->edac_cap = EDAC_FLAG_NONE; | |
| mci->mod_name = mod_str; | |
| mci->dev_name = pci_name(pdev); | |
| mci->ctl_page_to_phys = NULL; | |
| rc = get_dimm_config(mci, cfg); | |
| if (rc < 0) | |
| goto fail; | |
| /* Record ptr to the generic device */ | |
| mci->pdev = &pdev->dev; | |
| /* Add this new MC control structure to EDAC's list of MCs */ | |
| if (unlikely(edac_mc_add_mc(mci))) { | |
| edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); | |
| rc = -EINVAL; | |
| goto fail; | |
| } | |
| return 0; | |
| fail: | |
| kfree(mci->ctl_name); | |
| fail0: | |
| edac_mc_free(mci); | |
| imc->mci = NULL; | |
| return rc; | |
| } | |
| static void skx_unregister_mci(struct skx_imc *imc) | |
| { | |
| struct mem_ctl_info *mci = imc->mci; | |
| if (!mci) | |
| return; | |
| edac_dbg(0, "MC%d: mci = %p\n", imc->mc, mci); | |
| /* Remove MC sysfs nodes */ | |
| edac_mc_del_mc(mci->pdev); | |
| edac_dbg(1, "%s: free mci struct\n", mci->ctl_name); | |
| kfree(mci->ctl_name); | |
| edac_mc_free(mci); | |
| } | |
| static void skx_mce_output_error(struct mem_ctl_info *mci, | |
| const struct mce *m, | |
| struct decoded_addr *res) | |
| { | |
| enum hw_event_mc_err_type tp_event; | |
| char *optype; | |
| bool ripv = GET_BITFIELD(m->mcgstatus, 0, 0); | |
| bool overflow = GET_BITFIELD(m->status, 62, 62); | |
| bool uncorrected_error = GET_BITFIELD(m->status, 61, 61); | |
| bool scrub_err = false; | |
| bool recoverable; | |
| int len; | |
| u32 core_err_cnt = GET_BITFIELD(m->status, 38, 52); | |
| u32 mscod = GET_BITFIELD(m->status, 16, 31); | |
| u32 errcode = GET_BITFIELD(m->status, 0, 15); | |
| u32 optypenum = GET_BITFIELD(m->status, 4, 6); | |
| recoverable = GET_BITFIELD(m->status, 56, 56); | |
| if (uncorrected_error) { | |
| core_err_cnt = 1; | |
| if (ripv) { | |
| tp_event = HW_EVENT_ERR_UNCORRECTED; | |
| } else { | |
| tp_event = HW_EVENT_ERR_FATAL; | |
| } | |
| } else { | |
| tp_event = HW_EVENT_ERR_CORRECTED; | |
| } | |
| /* | |
| * According to Intel Architecture spec vol 3B, | |
| * Table 15-10 "IA32_MCi_Status [15:0] Compound Error Code Encoding" | |
| * memory errors should fit one of these masks: | |
| * 000f 0000 1mmm cccc (binary) | |
| * 000f 0010 1mmm cccc (binary) [RAM used as cache] | |
| * where: | |
| * f = Correction Report Filtering Bit. If 1, subsequent errors | |
| * won't be shown | |
| * mmm = error type | |
| * cccc = channel | |
| * If the mask doesn't match, report an error to the parsing logic | |
| */ | |
| if (!((errcode & 0xef80) == 0x80 || (errcode & 0xef80) == 0x280)) { | |
| optype = "Can't parse: it is not a mem"; | |
| } else { | |
| switch (optypenum) { | |
| case 0: | |
| optype = "generic undef request error"; | |
| break; | |
| case 1: | |
| optype = "memory read error"; | |
| break; | |
| case 2: | |
| optype = "memory write error"; | |
| break; | |
| case 3: | |
| optype = "addr/cmd error"; | |
| break; | |
| case 4: | |
| optype = "memory scrubbing error"; | |
| scrub_err = true; | |
| break; | |
| default: | |
| optype = "reserved"; | |
| break; | |
| } | |
| } | |
| if (adxl_component_count) { | |
| len = snprintf(skx_msg, MSG_SIZE, "%s%s err_code:0x%04x:0x%04x %s", | |
| overflow ? " OVERFLOW" : "", | |
| (uncorrected_error && recoverable) ? " recoverable" : "", | |
| mscod, errcode, adxl_msg); | |
| } else { | |
| len = snprintf(skx_msg, MSG_SIZE, | |
| "%s%s err_code:0x%04x:0x%04x socket:%d imc:%d rank:%d bg:%d ba:%d row:0x%x col:0x%x", | |
| overflow ? " OVERFLOW" : "", | |
| (uncorrected_error && recoverable) ? " recoverable" : "", | |
| mscod, errcode, | |
| res->socket, res->imc, res->rank, | |
| res->bank_group, res->bank_address, res->row, res->column); | |
| } | |
| if (skx_show_retry_rd_err_log) | |
| skx_show_retry_rd_err_log(res, skx_msg + len, MSG_SIZE - len, scrub_err); | |
| edac_dbg(0, "%s\n", skx_msg); | |
| /* Call the helper to output message */ | |
| edac_mc_handle_error(tp_event, mci, core_err_cnt, | |
| m->addr >> PAGE_SHIFT, m->addr & ~PAGE_MASK, 0, | |
| res->channel, res->dimm, -1, | |
| optype, skx_msg); | |
| } | |
| static bool skx_error_in_1st_level_mem(const struct mce *m) | |
| { | |
| u32 errcode; | |
| if (!skx_mem_cfg_2lm) | |
| return false; | |
| errcode = GET_BITFIELD(m->status, 0, 15); | |
| if ((errcode & 0xef80) != 0x280) | |
| return false; | |
| return true; | |
| } | |
| int skx_mce_check_error(struct notifier_block *nb, unsigned long val, | |
| void *data) | |
| { | |
| struct mce *mce = (struct mce *)data; | |
| struct decoded_addr res; | |
| struct mem_ctl_info *mci; | |
| char *type; | |
| if (mce->kflags & MCE_HANDLED_CEC) | |
| return NOTIFY_DONE; | |
| /* ignore unless this is memory related with an address */ | |
| if ((mce->status & 0xefff) >> 7 != 1 || !(mce->status & MCI_STATUS_ADDRV)) | |
| return NOTIFY_DONE; | |
| memset(&res, 0, sizeof(res)); | |
| res.addr = mce->addr; | |
| if (adxl_component_count) { | |
| if (!skx_adxl_decode(&res, skx_error_in_1st_level_mem(mce))) | |
| return NOTIFY_DONE; | |
| } else if (!skx_decode || !skx_decode(&res)) { | |
| return NOTIFY_DONE; | |
| } | |
| mci = res.dev->imc[res.imc].mci; | |
| if (!mci) | |
| return NOTIFY_DONE; | |
| if (mce->mcgstatus & MCG_STATUS_MCIP) | |
| type = "Exception"; | |
| else | |
| type = "Event"; | |
| skx_mc_printk(mci, KERN_DEBUG, "HANDLING MCE MEMORY ERROR\n"); | |
| skx_mc_printk(mci, KERN_DEBUG, "CPU %d: Machine Check %s: 0x%llx " | |
| "Bank %d: 0x%llx\n", mce->extcpu, type, | |
| mce->mcgstatus, mce->bank, mce->status); | |
| skx_mc_printk(mci, KERN_DEBUG, "TSC 0x%llx ", mce->tsc); | |
| skx_mc_printk(mci, KERN_DEBUG, "ADDR 0x%llx ", mce->addr); | |
| skx_mc_printk(mci, KERN_DEBUG, "MISC 0x%llx ", mce->misc); | |
| skx_mc_printk(mci, KERN_DEBUG, "PROCESSOR %u:0x%x TIME %llu SOCKET " | |
| "%u APIC 0x%x\n", mce->cpuvendor, mce->cpuid, | |
| mce->time, mce->socketid, mce->apicid); | |
| skx_mce_output_error(mci, mce, &res); | |
| mce->kflags |= MCE_HANDLED_EDAC; | |
| return NOTIFY_DONE; | |
| } | |
| void skx_remove(void) | |
| { | |
| int i, j; | |
| struct skx_dev *d, *tmp; | |
| edac_dbg(0, "\n"); | |
| list_for_each_entry_safe(d, tmp, &dev_edac_list, list) { | |
| list_del(&d->list); | |
| for (i = 0; i < NUM_IMC; i++) { | |
| if (d->imc[i].mci) | |
| skx_unregister_mci(&d->imc[i]); | |
| if (d->imc[i].mdev) | |
| pci_dev_put(d->imc[i].mdev); | |
| if (d->imc[i].mbase) | |
| iounmap(d->imc[i].mbase); | |
| for (j = 0; j < NUM_CHANNELS; j++) { | |
| if (d->imc[i].chan[j].cdev) | |
| pci_dev_put(d->imc[i].chan[j].cdev); | |
| } | |
| } | |
| if (d->util_all) | |
| pci_dev_put(d->util_all); | |
| if (d->pcu_cr3) | |
| pci_dev_put(d->pcu_cr3); | |
| if (d->sad_all) | |
| pci_dev_put(d->sad_all); | |
| if (d->uracu) | |
| pci_dev_put(d->uracu); | |
| kfree(d); | |
| } | |
| } |