blob: a9a6c208288a27173970b705de620fea3e076294 [file] [log] [blame]
/*
* IDE I/O functions
*
* Basic PIO and command management functionality.
*
* This code was split off from ide.c. See ide.c for history and original
* copyrights.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* For the avoidance of doubt the "preferred form" of this code is one which
* is in an open non patent encumbered format. Where cryptographic key signing
* forms part of the process of creating an executable the information
* including keys needed to generate an equivalently functional executable
* are deemed to be part of the source code.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/blkpg.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <linux/completion.h>
#include <linux/reboot.h>
#include <linux/cdrom.h>
#include <linux/seq_file.h>
#include <linux/device.h>
#include <linux/kmod.h>
#include <linux/scatterlist.h>
#include <linux/bitops.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/io.h>
static int __ide_end_request(ide_drive_t *drive, struct request *rq,
int uptodate, unsigned int nr_bytes, int dequeue)
{
int ret = 1;
int error = 0;
if (uptodate <= 0)
error = uptodate ? uptodate : -EIO;
/*
* if failfast is set on a request, override number of sectors and
* complete the whole request right now
*/
if (blk_noretry_request(rq) && error)
nr_bytes = rq->hard_nr_sectors << 9;
if (!blk_fs_request(rq) && error && !rq->errors)
rq->errors = -EIO;
/*
* decide whether to reenable DMA -- 3 is a random magic for now,
* if we DMA timeout more than 3 times, just stay in PIO
*/
if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
drive->retry_pio <= 3) {
drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
ide_dma_on(drive);
}
if (!blk_end_request(rq, error, nr_bytes))
ret = 0;
if (ret == 0 && dequeue)
drive->hwif->rq = NULL;
return ret;
}
/**
* ide_end_request - complete an IDE I/O
* @drive: IDE device for the I/O
* @uptodate:
* @nr_sectors: number of sectors completed
*
* This is our end_request wrapper function. We complete the I/O
* update random number input and dequeue the request, which if
* it was tagged may be out of order.
*/
int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
{
unsigned int nr_bytes = nr_sectors << 9;
struct request *rq = drive->hwif->rq;
if (!nr_bytes) {
if (blk_pc_request(rq))
nr_bytes = rq->data_len;
else
nr_bytes = rq->hard_cur_sectors << 9;
}
return __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
}
EXPORT_SYMBOL(ide_end_request);
/**
* ide_end_dequeued_request - complete an IDE I/O
* @drive: IDE device for the I/O
* @uptodate:
* @nr_sectors: number of sectors completed
*
* Complete an I/O that is no longer on the request queue. This
* typically occurs when we pull the request and issue a REQUEST_SENSE.
* We must still finish the old request but we must not tamper with the
* queue in the meantime.
*
* NOTE: This path does not handle barrier, but barrier is not supported
* on ide-cd anyway.
*/
int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
int uptodate, int nr_sectors)
{
BUG_ON(!blk_rq_started(rq));
return __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
}
EXPORT_SYMBOL_GPL(ide_end_dequeued_request);
/**
* ide_end_drive_cmd - end an explicit drive command
* @drive: command
* @stat: status bits
* @err: error bits
*
* Clean up after success/failure of an explicit drive command.
* These get thrown onto the queue so they are synchronized with
* real I/O operations on the drive.
*
* In LBA48 mode we have to read the register set twice to get
* all the extra information out.
*/
void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->rq;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
ide_task_t *task = (ide_task_t *)rq->special;
if (task) {
struct ide_taskfile *tf = &task->tf;
tf->error = err;
tf->status = stat;
drive->hwif->tp_ops->tf_read(drive, task);
if (task->tf_flags & IDE_TFLAG_DYN)
kfree(task);
}
} else if (blk_pm_request(rq)) {
struct request_pm_state *pm = rq->data;
ide_complete_power_step(drive, rq);
if (pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return;
}
hwif->rq = NULL;
rq->errors = err;
if (unlikely(blk_end_request(rq, (rq->errors ? -EIO : 0),
blk_rq_bytes(rq))))
BUG();
}
EXPORT_SYMBOL(ide_end_drive_cmd);
static void ide_kill_rq(ide_drive_t *drive, struct request *rq)
{
if (rq->rq_disk) {
struct ide_driver *drv;
drv = *(struct ide_driver **)rq->rq_disk->private_data;
drv->end_request(drive, 0, 0);
} else
ide_end_request(drive, 0, 0);
}
static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
ide_hwif_t *hwif = drive->hwif;
if ((stat & ATA_BUSY) ||
((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else if (stat & ATA_ERR) {
/* err has different meaning on cdrom and tape */
if (err == ATA_ABORTED) {
if ((drive->dev_flags & IDE_DFLAG_LBA) &&
/* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
return ide_stopped;
} else if ((err & BAD_CRC) == BAD_CRC) {
/* UDMA crc error, just retry the operation */
drive->crc_count++;
} else if (err & (ATA_BBK | ATA_UNC)) {
/* retries won't help these */
rq->errors = ERROR_MAX;
} else if (err & ATA_TRK0NF) {
/* help it find track zero */
rq->errors |= ERROR_RECAL;
}
}
if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
(hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
int nsect = drive->mult_count ? drive->mult_count : 1;
ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE);
}
if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
ide_kill_rq(drive, rq);
return ide_stopped;
}
if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
rq->errors |= ERROR_RESET;
if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
++rq->errors;
return ide_do_reset(drive);
}
if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
drive->special.b.recalibrate = 1;
++rq->errors;
return ide_stopped;
}
static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
ide_hwif_t *hwif = drive->hwif;
if ((stat & ATA_BUSY) ||
((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
/* other bits are useless when BUSY */
rq->errors |= ERROR_RESET;
} else {
/* add decoding error stuff */
}
if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
/* force an abort */
hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
if (rq->errors >= ERROR_MAX) {
ide_kill_rq(drive, rq);
} else {
if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
++rq->errors;
return ide_do_reset(drive);
}
++rq->errors;
}
return ide_stopped;
}
static ide_startstop_t
__ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
if (drive->media == ide_disk)
return ide_ata_error(drive, rq, stat, err);
return ide_atapi_error(drive, rq, stat, err);
}
/**
* ide_error - handle an error on the IDE
* @drive: drive the error occurred on
* @msg: message to report
* @stat: status bits
*
* ide_error() takes action based on the error returned by the drive.
* For normal I/O that may well include retries. We deal with
* both new-style (taskfile) and old style command handling here.
* In the case of taskfile command handling there is work left to
* do
*/
ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat)
{
struct request *rq;
u8 err;
err = ide_dump_status(drive, msg, stat);
rq = drive->hwif->rq;
if (rq == NULL)
return ide_stopped;
/* retry only "normal" I/O: */
if (!blk_fs_request(rq)) {
rq->errors = 1;
ide_end_drive_cmd(drive, stat, err);
return ide_stopped;
}
return __ide_error(drive, rq, stat, err);
}
EXPORT_SYMBOL_GPL(ide_error);
static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
tf->nsect = drive->sect;
tf->lbal = drive->sect;
tf->lbam = drive->cyl;
tf->lbah = drive->cyl >> 8;
tf->device = (drive->head - 1) | drive->select;
tf->command = ATA_CMD_INIT_DEV_PARAMS;
}
static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
tf->nsect = drive->sect;
tf->command = ATA_CMD_RESTORE;
}
static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
{
tf->nsect = drive->mult_req;
tf->command = ATA_CMD_SET_MULTI;
}
static ide_startstop_t ide_disk_special(ide_drive_t *drive)
{
special_t *s = &drive->special;
ide_task_t args;
memset(&args, 0, sizeof(ide_task_t));
args.data_phase = TASKFILE_NO_DATA;
if (s->b.set_geometry) {
s->b.set_geometry = 0;
ide_tf_set_specify_cmd(drive, &args.tf);
} else if (s->b.recalibrate) {
s->b.recalibrate = 0;
ide_tf_set_restore_cmd(drive, &args.tf);
} else if (s->b.set_multmode) {
s->b.set_multmode = 0;
ide_tf_set_setmult_cmd(drive, &args.tf);
} else if (s->all) {
int special = s->all;
s->all = 0;
printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
return ide_stopped;
}
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE |
IDE_TFLAG_CUSTOM_HANDLER;
do_rw_taskfile(drive, &args);
return ide_started;
}
/**
* do_special - issue some special commands
* @drive: drive the command is for
*
* do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
* ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
*
* It used to do much more, but has been scaled back.
*/
static ide_startstop_t do_special (ide_drive_t *drive)
{
special_t *s = &drive->special;
#ifdef DEBUG
printk("%s: do_special: 0x%02x\n", drive->name, s->all);
#endif
if (drive->media == ide_disk)
return ide_disk_special(drive);
s->all = 0;
drive->mult_req = 0;
return ide_stopped;
}
void ide_map_sg(ide_drive_t *drive, struct request *rq)
{
ide_hwif_t *hwif = drive->hwif;
struct scatterlist *sg = hwif->sg_table;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
hwif->sg_nents = 1;
} else if (!rq->bio) {
sg_init_one(sg, rq->data, rq->data_len);
hwif->sg_nents = 1;
} else {
hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
}
}
EXPORT_SYMBOL_GPL(ide_map_sg);
void ide_init_sg_cmd(ide_drive_t *drive, struct request *rq)
{
ide_hwif_t *hwif = drive->hwif;
hwif->nsect = hwif->nleft = rq->nr_sectors;
hwif->cursg_ofs = 0;
hwif->cursg = NULL;
}
EXPORT_SYMBOL_GPL(ide_init_sg_cmd);
/**
* execute_drive_command - issue special drive command
* @drive: the drive to issue the command on
* @rq: the request structure holding the command
*
* execute_drive_cmd() issues a special drive command, usually
* initiated by ioctl() from the external hdparm program. The
* command can be a drive command, drive task or taskfile
* operation. Weirdly you can call it with NULL to wait for
* all commands to finish. Don't do this as that is due to change
*/
static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
struct request *rq)
{
ide_hwif_t *hwif = drive->hwif;
ide_task_t *task = rq->special;
if (task) {
hwif->data_phase = task->data_phase;
switch (hwif->data_phase) {
case TASKFILE_MULTI_OUT:
case TASKFILE_OUT:
case TASKFILE_MULTI_IN:
case TASKFILE_IN:
ide_init_sg_cmd(drive, rq);
ide_map_sg(drive, rq);
default:
break;
}
return do_rw_taskfile(drive, task);
}
/*
* NULL is actually a valid way of waiting for
* all current requests to be flushed from the queue.
*/
#ifdef DEBUG
printk("%s: DRIVE_CMD (null)\n", drive->name);
#endif
ide_end_drive_cmd(drive, hwif->tp_ops->read_status(hwif),
ide_read_error(drive));
return ide_stopped;
}
int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
int arg)
{
struct request_queue *q = drive->queue;
struct request *rq;
int ret = 0;
if (!(setting->flags & DS_SYNC))
return setting->set(drive, arg);
rq = blk_get_request(q, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->cmd_len = 5;
rq->cmd[0] = REQ_DEVSET_EXEC;
*(int *)&rq->cmd[1] = arg;
rq->special = setting->set;
if (blk_execute_rq(q, NULL, rq, 0))
ret = rq->errors;
blk_put_request(rq);
return ret;
}
EXPORT_SYMBOL_GPL(ide_devset_execute);
static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
{
u8 cmd = rq->cmd[0];
if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) {
ide_task_t task;
struct ide_taskfile *tf = &task.tf;
memset(&task, 0, sizeof(task));
if (cmd == REQ_PARK_HEADS) {
drive->sleep = *(unsigned long *)rq->special;
drive->dev_flags |= IDE_DFLAG_SLEEPING;
tf->command = ATA_CMD_IDLEIMMEDIATE;
tf->feature = 0x44;
tf->lbal = 0x4c;
tf->lbam = 0x4e;
tf->lbah = 0x55;
task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER;
} else /* cmd == REQ_UNPARK_HEADS */
tf->command = ATA_CMD_CHK_POWER;
task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
task.rq = rq;
drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA;
return do_rw_taskfile(drive, &task);
}
switch (cmd) {
case REQ_DEVSET_EXEC:
{
int err, (*setfunc)(ide_drive_t *, int) = rq->special;
err = setfunc(drive, *(int *)&rq->cmd[1]);
if (err)
rq->errors = err;
else
err = 1;
ide_end_request(drive, err, 0);
return ide_stopped;
}
case REQ_DRIVE_RESET:
return ide_do_reset(drive);
default:
blk_dump_rq_flags(rq, "ide_special_rq - bad request");
ide_end_request(drive, 0, 0);
return ide_stopped;
}
}
/**
* start_request - start of I/O and command issuing for IDE
*
* start_request() initiates handling of a new I/O request. It
* accepts commands and I/O (read/write) requests.
*
* FIXME: this function needs a rename
*/
static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
{
ide_startstop_t startstop;
BUG_ON(!blk_rq_started(rq));
#ifdef DEBUG
printk("%s: start_request: current=0x%08lx\n",
drive->hwif->name, (unsigned long) rq);
#endif
/* bail early if we've exceeded max_failures */
if (drive->max_failures && (drive->failures > drive->max_failures)) {
rq->cmd_flags |= REQ_FAILED;
goto kill_rq;
}
if (blk_pm_request(rq))
ide_check_pm_state(drive, rq);
SELECT_DRIVE(drive);
if (ide_wait_stat(&startstop, drive, drive->ready_stat,
ATA_BUSY | ATA_DRQ, WAIT_READY)) {
printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
return startstop;
}
if (!drive->special.all) {
struct ide_driver *drv;
/*
* We reset the drive so we need to issue a SETFEATURES.
* Do it _after_ do_special() restored device parameters.
*/
if (drive->current_speed == 0xff)
ide_config_drive_speed(drive, drive->desired_speed);
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
return execute_drive_cmd(drive, rq);
else if (blk_pm_request(rq)) {
struct request_pm_state *pm = rq->data;
#ifdef DEBUG_PM
printk("%s: start_power_step(step: %d)\n",
drive->name, pm->pm_step);
#endif
startstop = ide_start_power_step(drive, rq);
if (startstop == ide_stopped &&
pm->pm_step == IDE_PM_COMPLETED)
ide_complete_pm_request(drive, rq);
return startstop;
} else if (!rq->rq_disk && blk_special_request(rq))
/*
* TODO: Once all ULDs have been modified to
* check for specific op codes rather than
* blindly accepting any special request, the
* check for ->rq_disk above may be replaced
* by a more suitable mechanism or even
* dropped entirely.
*/
return ide_special_rq(drive, rq);
drv = *(struct ide_driver **)rq->rq_disk->private_data;
return drv->do_request(drive, rq, rq->sector);
}
return do_special(drive);
kill_rq:
ide_kill_rq(drive, rq);
return ide_stopped;
}
/**
* ide_stall_queue - pause an IDE device
* @drive: drive to stall
* @timeout: time to stall for (jiffies)
*
* ide_stall_queue() can be used by a drive to give excess bandwidth back
* to the port by sleeping for timeout jiffies.
*/
void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
{
if (timeout > WAIT_WORSTCASE)
timeout = WAIT_WORSTCASE;
drive->sleep = timeout + jiffies;
drive->dev_flags |= IDE_DFLAG_SLEEPING;
}
EXPORT_SYMBOL(ide_stall_queue);
static inline int ide_lock_port(ide_hwif_t *hwif)
{
if (hwif->busy)
return 1;
hwif->busy = 1;
return 0;
}
static inline void ide_unlock_port(ide_hwif_t *hwif)
{
hwif->busy = 0;
}
static inline int ide_lock_host(struct ide_host *host, ide_hwif_t *hwif)
{
int rc = 0;
if (host->host_flags & IDE_HFLAG_SERIALIZE) {
rc = test_and_set_bit_lock(IDE_HOST_BUSY, &host->host_busy);
if (rc == 0) {
/* for atari only */
ide_get_lock(ide_intr, hwif);
}
}
return rc;
}
static inline void ide_unlock_host(struct ide_host *host)
{
if (host->host_flags & IDE_HFLAG_SERIALIZE) {
/* for atari only */
ide_release_lock();
clear_bit_unlock(IDE_HOST_BUSY, &host->host_busy);
}
}
/*
* Issue a new request to a device.
*/
void do_ide_request(struct request_queue *q)
{
ide_drive_t *drive = q->queuedata;
ide_hwif_t *hwif = drive->hwif;
struct ide_host *host = hwif->host;
struct request *rq = NULL;
ide_startstop_t startstop;
/*
* drive is doing pre-flush, ordered write, post-flush sequence. even
* though that is 3 requests, it must be seen as a single transaction.
* we must not preempt this drive until that is complete
*/
if (blk_queue_flushing(q))
/*
* small race where queue could get replugged during
* the 3-request flush cycle, just yank the plug since
* we want it to finish asap
*/
blk_remove_plug(q);
spin_unlock_irq(q->queue_lock);
if (ide_lock_host(host, hwif))
goto plug_device_2;
spin_lock_irq(&hwif->lock);
if (!ide_lock_port(hwif)) {
ide_hwif_t *prev_port;
repeat:
prev_port = hwif->host->cur_port;
hwif->rq = NULL;
if (drive->dev_flags & IDE_DFLAG_SLEEPING) {
if (time_before(drive->sleep, jiffies)) {
ide_unlock_port(hwif);
goto plug_device;
}
}
if ((hwif->host->host_flags & IDE_HFLAG_SERIALIZE) &&
hwif != prev_port) {
/*
* set nIEN for previous port, drives in the
* quirk_list may not like intr setups/cleanups
*/
if (prev_port && prev_port->cur_dev->quirk_list == 0)
prev_port->tp_ops->set_irq(prev_port, 0);
hwif->host->cur_port = hwif;
}
hwif->cur_dev = drive;
drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
spin_unlock_irq(&hwif->lock);
spin_lock_irq(q->queue_lock);
/*
* we know that the queue isn't empty, but this can happen
* if the q->prep_rq_fn() decides to kill a request
*/
rq = elv_next_request(drive->queue);
spin_unlock_irq(q->queue_lock);
spin_lock_irq(&hwif->lock);
if (!rq) {
ide_unlock_port(hwif);
goto out;
}
/*
* Sanity: don't accept a request that isn't a PM request
* if we are currently power managed. This is very important as
* blk_stop_queue() doesn't prevent the elv_next_request()
* above to return us whatever is in the queue. Since we call
* ide_do_request() ourselves, we end up taking requests while
* the queue is blocked...
*
* We let requests forced at head of queue with ide-preempt
* though. I hope that doesn't happen too much, hopefully not
* unless the subdriver triggers such a thing in its own PM
* state machine.
*/
if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
blk_pm_request(rq) == 0 &&
(rq->cmd_flags & REQ_PREEMPT) == 0) {
/* there should be no pending command at this point */
ide_unlock_port(hwif);
goto plug_device;
}
hwif->rq = rq;
spin_unlock_irq(&hwif->lock);
startstop = start_request(drive, rq);
spin_lock_irq(&hwif->lock);
if (startstop == ide_stopped)
goto repeat;
} else
goto plug_device;
out:
spin_unlock_irq(&hwif->lock);
if (rq == NULL)
ide_unlock_host(host);
spin_lock_irq(q->queue_lock);
return;
plug_device:
spin_unlock_irq(&hwif->lock);
ide_unlock_host(host);
plug_device_2:
spin_lock_irq(q->queue_lock);
if (!elv_queue_empty(q))
blk_plug_device(q);
}
/*
* un-busy the port etc, and clear any pending DMA status. we want to
* retry the current request in pio mode instead of risking tossing it
* all away
*/
static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
{
ide_hwif_t *hwif = drive->hwif;
struct request *rq;
ide_startstop_t ret = ide_stopped;
/*
* end current dma transaction
*/
if (error < 0) {
printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
(void)hwif->dma_ops->dma_end(drive);
ret = ide_error(drive, "dma timeout error",
hwif->tp_ops->read_status(hwif));
} else {
printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
hwif->dma_ops->dma_timeout(drive);
}
/*
* disable dma for now, but remember that we did so because of
* a timeout -- we'll reenable after we finish this next request
* (or rather the first chunk of it) in pio.
*/
drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
drive->retry_pio++;
ide_dma_off_quietly(drive);
/*
* un-busy drive etc and make sure request is sane
*/
rq = hwif->rq;
if (!rq)
goto out;
hwif->rq = NULL;
rq->errors = 0;
if (!rq->bio)
goto out;
rq->sector = rq->bio->bi_sector;
rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
rq->hard_cur_sectors = rq->current_nr_sectors;
rq->buffer = bio_data(rq->bio);
out:
return ret;
}
static void ide_plug_device(ide_drive_t *drive)
{
struct request_queue *q = drive->queue;
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
if (!elv_queue_empty(q))
blk_plug_device(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
/**
* ide_timer_expiry - handle lack of an IDE interrupt
* @data: timer callback magic (hwif)
*
* An IDE command has timed out before the expected drive return
* occurred. At this point we attempt to clean up the current
* mess. If the current handler includes an expiry handler then
* we invoke the expiry handler, and providing it is happy the
* work is done. If that fails we apply generic recovery rules
* invoking the handler and checking the drive DMA status. We
* have an excessively incestuous relationship with the DMA
* logic that wants cleaning up.
*/
void ide_timer_expiry (unsigned long data)
{
ide_hwif_t *hwif = (ide_hwif_t *)data;
ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
unsigned long flags;
int wait = -1;
int plug_device = 0;
spin_lock_irqsave(&hwif->lock, flags);
handler = hwif->handler;
if (handler == NULL || hwif->req_gen != hwif->req_gen_timer) {
/*
* Either a marginal timeout occurred
* (got the interrupt just as timer expired),
* or we were "sleeping" to give other devices a chance.
* Either way, we don't really want to complain about anything.
*/
} else {
ide_expiry_t *expiry = hwif->expiry;
ide_startstop_t startstop = ide_stopped;
drive = hwif->cur_dev;
if (expiry) {
wait = expiry(drive);
if (wait > 0) { /* continue */
/* reset timer */
hwif->timer.expires = jiffies + wait;
hwif->req_gen_timer = hwif->req_gen;
add_timer(&hwif->timer);
spin_unlock_irqrestore(&hwif->lock, flags);
return;
}
}
hwif->handler = NULL;
/*
* We need to simulate a real interrupt when invoking
* the handler() function, which means we need to
* globally mask the specific IRQ:
*/
spin_unlock(&hwif->lock);
/* disable_irq_nosync ?? */
disable_irq(hwif->irq);
/* local CPU only, as if we were handling an interrupt */
local_irq_disable();
if (hwif->polling) {
startstop = handler(drive);
} else if (drive_is_ready(drive)) {
if (drive->waiting_for_dma)
hwif->dma_ops->dma_lost_irq(drive);
(void)ide_ack_intr(hwif);
printk(KERN_WARNING "%s: lost interrupt\n",
drive->name);
startstop = handler(drive);
} else {
if (drive->waiting_for_dma)
startstop = ide_dma_timeout_retry(drive, wait);
else
startstop = ide_error(drive, "irq timeout",
hwif->tp_ops->read_status(hwif));
}
spin_lock_irq(&hwif->lock);
enable_irq(hwif->irq);
if (startstop == ide_stopped) {
ide_unlock_port(hwif);
plug_device = 1;
}
}
spin_unlock_irqrestore(&hwif->lock, flags);
if (plug_device) {
ide_unlock_host(hwif->host);
ide_plug_device(drive);
}
}
/**
* unexpected_intr - handle an unexpected IDE interrupt
* @irq: interrupt line
* @hwif: port being processed
*
* There's nothing really useful we can do with an unexpected interrupt,
* other than reading the status register (to clear it), and logging it.
* There should be no way that an irq can happen before we're ready for it,
* so we needn't worry much about losing an "important" interrupt here.
*
* On laptops (and "green" PCs), an unexpected interrupt occurs whenever
* the drive enters "idle", "standby", or "sleep" mode, so if the status
* looks "good", we just ignore the interrupt completely.
*
* This routine assumes __cli() is in effect when called.
*
* If an unexpected interrupt happens on irq15 while we are handling irq14
* and if the two interfaces are "serialized" (CMD640), then it looks like
* we could screw up by interfering with a new request being set up for
* irq15.
*
* In reality, this is a non-issue. The new command is not sent unless
* the drive is ready to accept one, in which case we know the drive is
* not trying to interrupt us. And ide_set_handler() is always invoked
* before completing the issuance of any new drive command, so we will not
* be accidentally invoked as a result of any valid command completion
* interrupt.
*/
static void unexpected_intr(int irq, ide_hwif_t *hwif)
{
u8 stat = hwif->tp_ops->read_status(hwif);
if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
/* Try to not flood the console with msgs */
static unsigned long last_msgtime, count;
++count;
if (time_after(jiffies, last_msgtime + HZ)) {
last_msgtime = jiffies;
printk(KERN_ERR "%s: unexpected interrupt, "
"status=0x%02x, count=%ld\n",
hwif->name, stat, count);
}
}
}
/**
* ide_intr - default IDE interrupt handler
* @irq: interrupt number
* @dev_id: hwif
* @regs: unused weirdness from the kernel irq layer
*
* This is the default IRQ handler for the IDE layer. You should
* not need to override it. If you do be aware it is subtle in
* places
*
* hwif is the interface in the group currently performing
* a command. hwif->cur_dev is the drive and hwif->handler is
* the IRQ handler to call. As we issue a command the handlers
* step through multiple states, reassigning the handler to the
* next step in the process. Unlike a smart SCSI controller IDE
* expects the main processor to sequence the various transfer
* stages. We also manage a poll timer to catch up with most
* timeout situations. There are still a few where the handlers
* don't ever decide to give up.
*
* The handler eventually returns ide_stopped to indicate the
* request completed. At this point we issue the next request
* on the port and the process begins again.
*/
irqreturn_t ide_intr (int irq, void *dev_id)
{
ide_hwif_t *hwif = (ide_hwif_t *)dev_id;
ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
unsigned long flags;
ide_startstop_t startstop;
irqreturn_t irq_ret = IRQ_NONE;
int plug_device = 0;
if (hwif->host->host_flags & IDE_HFLAG_SERIALIZE) {
if (hwif != hwif->host->cur_port)
goto out_early;
}
spin_lock_irqsave(&hwif->lock, flags);
if (!ide_ack_intr(hwif))
goto out;
handler = hwif->handler;
if (handler == NULL || hwif->polling) {
/*
* Not expecting an interrupt from this drive.
* That means this could be:
* (1) an interrupt from another PCI device
* sharing the same PCI INT# as us.
* or (2) a drive just entered sleep or standby mode,
* and is interrupting to let us know.
* or (3) a spurious interrupt of unknown origin.
*
* For PCI, we cannot tell the difference,
* so in that case we just ignore it and hope it goes away.
*
* FIXME: unexpected_intr should be hwif-> then we can
* remove all the ifdef PCI crap
*/
#ifdef CONFIG_BLK_DEV_IDEPCI
if (hwif->chipset != ide_pci)
#endif /* CONFIG_BLK_DEV_IDEPCI */
{
/*
* Probably not a shared PCI interrupt,
* so we can safely try to do something about it:
*/
unexpected_intr(irq, hwif);
#ifdef CONFIG_BLK_DEV_IDEPCI
} else {
/*
* Whack the status register, just in case
* we have a leftover pending IRQ.
*/
(void)hwif->tp_ops->read_status(hwif);
#endif /* CONFIG_BLK_DEV_IDEPCI */
}
goto out;
}
drive = hwif->cur_dev;
if (!drive_is_ready(drive))
/*
* This happens regularly when we share a PCI IRQ with
* another device. Unfortunately, it can also happen
* with some buggy drives that trigger the IRQ before
* their status register is up to date. Hopefully we have
* enough advance overhead that the latter isn't a problem.
*/
goto out;
hwif->handler = NULL;
hwif->req_gen++;
del_timer(&hwif->timer);
spin_unlock(&hwif->lock);
if (hwif->port_ops && hwif->port_ops->clear_irq)
hwif->port_ops->clear_irq(drive);
if (drive->dev_flags & IDE_DFLAG_UNMASK)
local_irq_enable_in_hardirq();
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
spin_lock_irq(&hwif->lock);
/*
* Note that handler() may have set things up for another
* interrupt to occur soon, but it cannot happen until
* we exit from this routine, because it will be the
* same irq as is currently being serviced here, and Linux
* won't allow another of the same (on any CPU) until we return.
*/
if (startstop == ide_stopped) {
BUG_ON(hwif->handler);
ide_unlock_port(hwif);
plug_device = 1;
}
irq_ret = IRQ_HANDLED;
out:
spin_unlock_irqrestore(&hwif->lock, flags);
out_early:
if (plug_device) {
ide_unlock_host(hwif->host);
ide_plug_device(drive);
}
return irq_ret;
}
EXPORT_SYMBOL_GPL(ide_intr);
/**
* ide_do_drive_cmd - issue IDE special command
* @drive: device to issue command
* @rq: request to issue
*
* This function issues a special IDE device request
* onto the request queue.
*
* the rq is queued at the head of the request queue, displacing
* the currently-being-processed request and this function
* returns immediately without waiting for the new rq to be
* completed. This is VERY DANGEROUS, and is intended for
* careful use by the ATAPI tape/cdrom driver code.
*/
void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq)
{
struct request_queue *q = drive->queue;
unsigned long flags;
drive->hwif->rq = NULL;
spin_lock_irqsave(q->queue_lock, flags);
__elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(ide_do_drive_cmd);
void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
{
ide_hwif_t *hwif = drive->hwif;
ide_task_t task;
memset(&task, 0, sizeof(task));
task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM |
IDE_TFLAG_OUT_FEATURE | tf_flags;
task.tf.feature = dma; /* Use PIO/DMA */
task.tf.lbam = bcount & 0xff;
task.tf.lbah = (bcount >> 8) & 0xff;
ide_tf_dump(drive->name, &task.tf);
hwif->tp_ops->set_irq(hwif, 1);
SELECT_MASK(drive, 0);
hwif->tp_ops->tf_load(drive, &task);
}
EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
void ide_pad_transfer(ide_drive_t *drive, int write, int len)
{
ide_hwif_t *hwif = drive->hwif;
u8 buf[4] = { 0 };
while (len > 0) {
if (write)
hwif->tp_ops->output_data(drive, NULL, buf, min(4, len));
else
hwif->tp_ops->input_data(drive, NULL, buf, min(4, len));
len -= 4;
}
}
EXPORT_SYMBOL_GPL(ide_pad_transfer);