| /* | |
| * Apple Cinema Display driver | |
| * | |
| * Copyright (C) 2006 Michael Hanselmann (linux-kernel@hansmi.ch) | |
| * | |
| * Thanks to Caskey L. Dickson for his work with acdctl. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/usb.h> | |
| #include <linux/backlight.h> | |
| #include <linux/timer.h> | |
| #include <linux/workqueue.h> | |
| #include <asm/atomic.h> | |
| #include <asm/semaphore.h> | |
| #define APPLE_VENDOR_ID 0x05AC | |
| #define USB_REQ_GET_REPORT 0x01 | |
| #define USB_REQ_SET_REPORT 0x09 | |
| #define ACD_USB_TIMEOUT 250 | |
| #define ACD_USB_EDID 0x0302 | |
| #define ACD_USB_BRIGHTNESS 0x0310 | |
| #define ACD_BTN_NONE 0 | |
| #define ACD_BTN_BRIGHT_UP 3 | |
| #define ACD_BTN_BRIGHT_DOWN 4 | |
| #define ACD_URB_BUFFER_LEN 2 | |
| #define ACD_MSG_BUFFER_LEN 2 | |
| #define APPLEDISPLAY_DEVICE(prod) \ | |
| .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \ | |
| USB_DEVICE_ID_MATCH_INT_CLASS | \ | |
| USB_DEVICE_ID_MATCH_INT_PROTOCOL, \ | |
| .idVendor = APPLE_VENDOR_ID, \ | |
| .idProduct = (prod), \ | |
| .bInterfaceClass = USB_CLASS_HID, \ | |
| .bInterfaceProtocol = 0x00 | |
| /* table of devices that work with this driver */ | |
| static struct usb_device_id appledisplay_table [] = { | |
| { APPLEDISPLAY_DEVICE(0x9218) }, | |
| { APPLEDISPLAY_DEVICE(0x9219) }, | |
| { APPLEDISPLAY_DEVICE(0x921d) }, | |
| /* Terminating entry */ | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, appledisplay_table); | |
| /* Structure to hold all of our device specific stuff */ | |
| struct appledisplay { | |
| struct usb_device *udev; /* usb device */ | |
| struct urb *urb; /* usb request block */ | |
| struct backlight_device *bd; /* backlight device */ | |
| char *urbdata; /* interrupt URB data buffer */ | |
| char *msgdata; /* control message data buffer */ | |
| struct delayed_work work; | |
| int button_pressed; | |
| spinlock_t lock; | |
| }; | |
| static atomic_t count_displays = ATOMIC_INIT(0); | |
| static struct workqueue_struct *wq; | |
| static void appledisplay_complete(struct urb *urb) | |
| { | |
| struct appledisplay *pdata = urb->context; | |
| unsigned long flags; | |
| int status = urb->status; | |
| int retval; | |
| switch (status) { | |
| case 0: | |
| /* success */ | |
| break; | |
| case -EOVERFLOW: | |
| printk(KERN_ERR "appletouch: OVERFLOW with data " | |
| "length %d, actual length is %d\n", | |
| ACD_URB_BUFFER_LEN, pdata->urb->actual_length); | |
| case -ECONNRESET: | |
| case -ENOENT: | |
| case -ESHUTDOWN: | |
| /* This urb is terminated, clean up */ | |
| dbg("%s - urb shuttingdown with status: %d", | |
| __FUNCTION__, status); | |
| return; | |
| default: | |
| dbg("%s - nonzero urb status received: %d", | |
| __FUNCTION__, status); | |
| goto exit; | |
| } | |
| spin_lock_irqsave(&pdata->lock, flags); | |
| switch(pdata->urbdata[1]) { | |
| case ACD_BTN_BRIGHT_UP: | |
| case ACD_BTN_BRIGHT_DOWN: | |
| pdata->button_pressed = 1; | |
| queue_delayed_work(wq, &pdata->work, 0); | |
| break; | |
| case ACD_BTN_NONE: | |
| default: | |
| pdata->button_pressed = 0; | |
| break; | |
| } | |
| spin_unlock_irqrestore(&pdata->lock, flags); | |
| exit: | |
| retval = usb_submit_urb(pdata->urb, GFP_ATOMIC); | |
| if (retval) { | |
| err("%s - usb_submit_urb failed with result %d", | |
| __FUNCTION__, retval); | |
| } | |
| } | |
| static int appledisplay_bl_update_status(struct backlight_device *bd) | |
| { | |
| struct appledisplay *pdata = bl_get_data(bd); | |
| int retval; | |
| pdata->msgdata[0] = 0x10; | |
| pdata->msgdata[1] = bd->props.brightness; | |
| retval = usb_control_msg( | |
| pdata->udev, | |
| usb_sndctrlpipe(pdata->udev, 0), | |
| USB_REQ_SET_REPORT, | |
| USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | |
| ACD_USB_BRIGHTNESS, | |
| 0, | |
| pdata->msgdata, 2, | |
| ACD_USB_TIMEOUT); | |
| return retval; | |
| } | |
| static int appledisplay_bl_get_brightness(struct backlight_device *bd) | |
| { | |
| struct appledisplay *pdata = bl_get_data(bd); | |
| int retval; | |
| retval = usb_control_msg( | |
| pdata->udev, | |
| usb_rcvctrlpipe(pdata->udev, 0), | |
| USB_REQ_GET_REPORT, | |
| USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | |
| ACD_USB_BRIGHTNESS, | |
| 0, | |
| pdata->msgdata, 2, | |
| ACD_USB_TIMEOUT); | |
| if (retval < 0) | |
| return retval; | |
| else | |
| return pdata->msgdata[1]; | |
| } | |
| static struct backlight_ops appledisplay_bl_data = { | |
| .get_brightness = appledisplay_bl_get_brightness, | |
| .update_status = appledisplay_bl_update_status, | |
| }; | |
| static void appledisplay_work(struct work_struct *work) | |
| { | |
| struct appledisplay *pdata = | |
| container_of(work, struct appledisplay, work.work); | |
| int retval; | |
| retval = appledisplay_bl_get_brightness(pdata->bd); | |
| if (retval >= 0) | |
| pdata->bd->props.brightness = retval; | |
| /* Poll again in about 125ms if there's still a button pressed */ | |
| if (pdata->button_pressed) | |
| schedule_delayed_work(&pdata->work, HZ / 8); | |
| } | |
| static int appledisplay_probe(struct usb_interface *iface, | |
| const struct usb_device_id *id) | |
| { | |
| struct appledisplay *pdata; | |
| struct usb_device *udev = interface_to_usbdev(iface); | |
| struct usb_host_interface *iface_desc; | |
| struct usb_endpoint_descriptor *endpoint; | |
| int int_in_endpointAddr = 0; | |
| int i, retval = -ENOMEM, brightness; | |
| char bl_name[20]; | |
| /* set up the endpoint information */ | |
| /* use only the first interrupt-in endpoint */ | |
| iface_desc = iface->cur_altsetting; | |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { | |
| endpoint = &iface_desc->endpoint[i].desc; | |
| if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) { | |
| /* we found an interrupt in endpoint */ | |
| int_in_endpointAddr = endpoint->bEndpointAddress; | |
| break; | |
| } | |
| } | |
| if (!int_in_endpointAddr) { | |
| err("Could not find int-in endpoint"); | |
| return -EIO; | |
| } | |
| /* allocate memory for our device state and initialize it */ | |
| pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL); | |
| if (!pdata) { | |
| retval = -ENOMEM; | |
| err("Out of memory"); | |
| goto error; | |
| } | |
| pdata->udev = udev; | |
| spin_lock_init(&pdata->lock); | |
| INIT_DELAYED_WORK(&pdata->work, appledisplay_work); | |
| /* Allocate buffer for control messages */ | |
| pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL); | |
| if (!pdata->msgdata) { | |
| retval = -ENOMEM; | |
| err("appledisplay: Allocating buffer for control messages " | |
| "failed"); | |
| goto error; | |
| } | |
| /* Allocate interrupt URB */ | |
| pdata->urb = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!pdata->urb) { | |
| retval = -ENOMEM; | |
| err("appledisplay: Allocating URB failed"); | |
| goto error; | |
| } | |
| /* Allocate buffer for interrupt data */ | |
| pdata->urbdata = usb_buffer_alloc(pdata->udev, ACD_URB_BUFFER_LEN, | |
| GFP_KERNEL, &pdata->urb->transfer_dma); | |
| if (!pdata->urbdata) { | |
| retval = -ENOMEM; | |
| err("appledisplay: Allocating URB buffer failed"); | |
| goto error; | |
| } | |
| /* Configure interrupt URB */ | |
| usb_fill_int_urb(pdata->urb, udev, | |
| usb_rcvintpipe(udev, int_in_endpointAddr), | |
| pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete, | |
| pdata, 1); | |
| if (usb_submit_urb(pdata->urb, GFP_KERNEL)) { | |
| retval = -EIO; | |
| err("appledisplay: Submitting URB failed"); | |
| goto error; | |
| } | |
| /* Register backlight device */ | |
| snprintf(bl_name, sizeof(bl_name), "appledisplay%d", | |
| atomic_inc_return(&count_displays) - 1); | |
| pdata->bd = backlight_device_register(bl_name, NULL, pdata, | |
| &appledisplay_bl_data); | |
| if (IS_ERR(pdata->bd)) { | |
| err("appledisplay: Backlight registration failed"); | |
| goto error; | |
| } | |
| pdata->bd->props.max_brightness = 0xff; | |
| /* Try to get brightness */ | |
| brightness = appledisplay_bl_get_brightness(pdata->bd); | |
| if (brightness < 0) { | |
| retval = brightness; | |
| err("appledisplay: Error while getting initial brightness: %d", retval); | |
| goto error; | |
| } | |
| /* Set brightness in backlight device */ | |
| pdata->bd->props.brightness = brightness; | |
| /* save our data pointer in the interface device */ | |
| usb_set_intfdata(iface, pdata); | |
| printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n"); | |
| return 0; | |
| error: | |
| if (pdata) { | |
| if (pdata->urb) { | |
| usb_kill_urb(pdata->urb); | |
| if (pdata->urbdata) | |
| usb_buffer_free(pdata->udev, ACD_URB_BUFFER_LEN, | |
| pdata->urbdata, pdata->urb->transfer_dma); | |
| usb_free_urb(pdata->urb); | |
| } | |
| if (pdata->bd) | |
| backlight_device_unregister(pdata->bd); | |
| kfree(pdata->msgdata); | |
| } | |
| usb_set_intfdata(iface, NULL); | |
| kfree(pdata); | |
| return retval; | |
| } | |
| static void appledisplay_disconnect(struct usb_interface *iface) | |
| { | |
| struct appledisplay *pdata = usb_get_intfdata(iface); | |
| if (pdata) { | |
| usb_kill_urb(pdata->urb); | |
| cancel_delayed_work(&pdata->work); | |
| backlight_device_unregister(pdata->bd); | |
| usb_buffer_free(pdata->udev, ACD_URB_BUFFER_LEN, | |
| pdata->urbdata, pdata->urb->transfer_dma); | |
| usb_free_urb(pdata->urb); | |
| kfree(pdata->msgdata); | |
| kfree(pdata); | |
| } | |
| printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n"); | |
| } | |
| static struct usb_driver appledisplay_driver = { | |
| .name = "appledisplay", | |
| .probe = appledisplay_probe, | |
| .disconnect = appledisplay_disconnect, | |
| .id_table = appledisplay_table, | |
| }; | |
| static int __init appledisplay_init(void) | |
| { | |
| wq = create_singlethread_workqueue("appledisplay"); | |
| if (!wq) { | |
| err("Could not create work queue\n"); | |
| return -ENOMEM; | |
| } | |
| return usb_register(&appledisplay_driver); | |
| } | |
| static void __exit appledisplay_exit(void) | |
| { | |
| flush_workqueue(wq); | |
| destroy_workqueue(wq); | |
| usb_deregister(&appledisplay_driver); | |
| } | |
| MODULE_AUTHOR("Michael Hanselmann"); | |
| MODULE_DESCRIPTION("Apple Cinema Display driver"); | |
| MODULE_LICENSE("GPL"); | |
| module_init(appledisplay_init); | |
| module_exit(appledisplay_exit); |