Merge branch 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Many small fixes to show the real physical addresses of devices
instead of hashed addresses.
- One important fix to unbreak 32-bit SMP support: We forgot to 16-byte
align the spinlocks in the assembler code.
- Qemu support: The host will get a chance to sleep when the parisc
guest is idle. We use the same mechanism as the power architecture by
overlaying the "or %r10,%r10,%r10" instruction which is simply a nop
on real hardware.
* 'parisc-4.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: qemu idle sleep support
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
parisc: Show unhashed EISA EEPROM address
parisc: Show unhashed HPA of Dino chip
parisc: Show initial kernel memory layout unhashed
parisc: Show unhashed hardware inventory
diff --git a/arch/parisc/include/asm/ldcw.h b/arch/parisc/include/asm/ldcw.h
index dd5a08a..3eb4bfc 100644
--- a/arch/parisc/include/asm/ldcw.h
+++ b/arch/parisc/include/asm/ldcw.h
@@ -12,6 +12,7 @@
for the semaphore. */
#define __PA_LDCW_ALIGNMENT 16
+#define __PA_LDCW_ALIGN_ORDER 4
#define __ldcw_align(a) ({ \
unsigned long __ret = (unsigned long) &(a)->lock[0]; \
__ret = (__ret + __PA_LDCW_ALIGNMENT - 1) \
@@ -29,6 +30,7 @@
ldcd). */
#define __PA_LDCW_ALIGNMENT 4
+#define __PA_LDCW_ALIGN_ORDER 2
#define __ldcw_align(a) (&(a)->slock)
#define __LDCW "ldcw,co"
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d8f7735..29b99b8 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -870,7 +870,7 @@
static int count;
print_pa_hwpath(dev, hw_path);
- printk(KERN_INFO "%d. %s at 0x%p [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
+ printk(KERN_INFO "%d. %s at 0x%px [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
++count, dev->name, (void*) dev->hpa.start, hw_path, dev->id.hw_type,
dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index f3cecf5..e95207c 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -35,6 +35,7 @@
#include <asm/pgtable.h>
#include <asm/signal.h>
#include <asm/unistd.h>
+#include <asm/ldcw.h>
#include <asm/thread_info.h>
#include <linux/linkage.h>
@@ -46,6 +47,14 @@
#endif
.import pa_tlb_lock,data
+ .macro load_pa_tlb_lock reg
+#if __PA_LDCW_ALIGNMENT > 4
+ load32 PA(pa_tlb_lock) + __PA_LDCW_ALIGNMENT-1, \reg
+ depi 0,31,__PA_LDCW_ALIGN_ORDER, \reg
+#else
+ load32 PA(pa_tlb_lock), \reg
+#endif
+ .endm
/* space_to_prot macro creates a prot id from a space id */
@@ -457,7 +466,7 @@
.macro tlb_lock spc,ptp,pte,tmp,tmp1,fault
#ifdef CONFIG_SMP
cmpib,COND(=),n 0,\spc,2f
- load32 PA(pa_tlb_lock),\tmp
+ load_pa_tlb_lock \tmp
1: LDCW 0(\tmp),\tmp1
cmpib,COND(=) 0,\tmp1,1b
nop
@@ -480,7 +489,7 @@
/* Release pa_tlb_lock lock. */
.macro tlb_unlock1 spc,tmp
#ifdef CONFIG_SMP
- load32 PA(pa_tlb_lock),\tmp
+ load_pa_tlb_lock \tmp
tlb_unlock0 \spc,\tmp
#endif
.endm
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index adf7187..2d40c4f 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -36,6 +36,7 @@
#include <asm/assembly.h>
#include <asm/pgtable.h>
#include <asm/cache.h>
+#include <asm/ldcw.h>
#include <linux/linkage.h>
.text
@@ -333,8 +334,12 @@
.macro tlb_lock la,flags,tmp
#ifdef CONFIG_SMP
- ldil L%pa_tlb_lock,%r1
- ldo R%pa_tlb_lock(%r1),\la
+#if __PA_LDCW_ALIGNMENT > 4
+ load32 pa_tlb_lock + __PA_LDCW_ALIGNMENT-1, \la
+ depi 0,31,__PA_LDCW_ALIGN_ORDER, \la
+#else
+ load32 pa_tlb_lock, \la
+#endif
rsm PSW_SM_I,\flags
1: LDCW 0(\la),\tmp
cmpib,<>,n 0,\tmp,3f
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 30f9239..cad3e86 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -39,6 +39,7 @@
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/fs.h>
+#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/personality.h>
#include <linux/ptrace.h>
@@ -184,6 +185,44 @@
}
/*
+ * Idle thread support
+ *
+ * Detect when running on QEMU with SeaBIOS PDC Firmware and let
+ * QEMU idle the host too.
+ */
+
+int running_on_qemu __read_mostly;
+
+void __cpuidle arch_cpu_idle_dead(void)
+{
+ /* nop on real hardware, qemu will offline CPU. */
+ asm volatile("or %%r31,%%r31,%%r31\n":::);
+}
+
+void __cpuidle arch_cpu_idle(void)
+{
+ local_irq_enable();
+
+ /* nop on real hardware, qemu will idle sleep. */
+ asm volatile("or %%r10,%%r10,%%r10\n":::);
+}
+
+static int __init parisc_idle_init(void)
+{
+ const char *marker;
+
+ /* check QEMU/SeaBIOS marker in PAGE0 */
+ marker = (char *) &PAGE0->pad0;
+ running_on_qemu = (memcmp(marker, "SeaBIOS", 8) == 0);
+
+ if (!running_on_qemu)
+ cpu_idle_poll_ctrl(1);
+
+ return 0;
+}
+arch_initcall(parisc_idle_init);
+
+/*
* Copy architecture-specific thread state
*/
int
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 13f7854..48f4139 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -631,11 +631,11 @@
mem_init_print_info(NULL);
#ifdef CONFIG_DEBUG_KERNEL /* double-sanity-check paranoia */
printk("virtual kernel memory layout:\n"
- " vmalloc : 0x%p - 0x%p (%4ld MB)\n"
- " memory : 0x%p - 0x%p (%4ld MB)\n"
- " .init : 0x%p - 0x%p (%4ld kB)\n"
- " .data : 0x%p - 0x%p (%4ld kB)\n"
- " .text : 0x%p - 0x%p (%4ld kB)\n",
+ " vmalloc : 0x%px - 0x%px (%4ld MB)\n"
+ " memory : 0x%px - 0x%px (%4ld MB)\n"
+ " .init : 0x%px - 0x%px (%4ld kB)\n"
+ " .data : 0x%px - 0x%px (%4ld kB)\n"
+ " .text : 0x%px - 0x%px (%4ld kB)\n",
(void*)VMALLOC_START, (void*)VMALLOC_END,
(VMALLOC_END - VMALLOC_START) >> 20,
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 0b3fb99..7390fb8 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -303,7 +303,7 @@
struct dino_device *dino_dev = irq_data_get_irq_chip_data(d);
int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq);
+ DBG(KERN_WARNING "%s(0x%px, %d)\n", __func__, dino_dev, d->irq);
/* Clear the matching bit in the IMR register */
dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
@@ -316,7 +316,7 @@
int local_irq = gsc_find_local_irq(d->irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
u32 tmp;
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, d->irq);
+ DBG(KERN_WARNING "%s(0x%px, %d)\n", __func__, dino_dev, d->irq);
/*
** clear pending IRQ bits
@@ -396,7 +396,7 @@
if (mask) {
if (--ilr_loop > 0)
goto ilr_again;
- printk(KERN_ERR "Dino 0x%p: stuck interrupt %d\n",
+ printk(KERN_ERR "Dino 0x%px: stuck interrupt %d\n",
dino_dev->hba.base_addr, mask);
return IRQ_NONE;
}
@@ -553,7 +553,7 @@
struct pci_dev *dev;
struct dino_device *dino_dev = DINO_DEV(parisc_walk_tree(bus->bridge));
- DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
+ DBG(KERN_WARNING "%s(0x%px) bus %d platform_data 0x%px\n",
__func__, bus, bus->busn_res.start,
bus->bridge->platform_data);
@@ -854,7 +854,7 @@
res->flags = IORESOURCE_IO; /* do not mark it busy ! */
if (request_resource(&ioport_resource, res) < 0) {
printk(KERN_ERR "%s: request I/O Port region failed "
- "0x%lx/%lx (hpa 0x%p)\n",
+ "0x%lx/%lx (hpa 0x%px)\n",
name, (unsigned long)res->start, (unsigned long)res->end,
dino_dev->hba.base_addr);
return 1;
diff --git a/drivers/parisc/eisa_eeprom.c b/drivers/parisc/eisa_eeprom.c
index 4dd9b13..99a80da 100644
--- a/drivers/parisc/eisa_eeprom.c
+++ b/drivers/parisc/eisa_eeprom.c
@@ -106,7 +106,7 @@
return retval;
}
- printk(KERN_INFO "EISA EEPROM at 0x%p\n", eisa_eeprom_addr);
+ printk(KERN_INFO "EISA EEPROM at 0x%px\n", eisa_eeprom_addr);
return 0;
}
