|  | /* -*- linux-c -*- | 
|  | *  drivers/char/viotape.c | 
|  | * | 
|  | *  iSeries Virtual Tape | 
|  | * | 
|  | *  Authors: Dave Boutcher <boutcher@us.ibm.com> | 
|  | *           Ryan Arnold <ryanarn@us.ibm.com> | 
|  | *           Colin Devilbiss <devilbis@us.ibm.com> | 
|  | *           Stephen Rothwell | 
|  | * | 
|  | * (C) Copyright 2000-2004 IBM Corporation | 
|  | * | 
|  | * This program is free software;  you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation; either version 2 of the | 
|  | * License, or (at your option) anyu later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, but | 
|  | * WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
|  | * General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software Foundation, | 
|  | * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
|  | * | 
|  | * This routine provides access to tape drives owned and managed by an OS/400 | 
|  | * partition running on the same box as this Linux partition. | 
|  | * | 
|  | * All tape operations are performed by sending messages back and forth to | 
|  | * the OS/400 partition.  The format of the messages is defined in | 
|  | * iseries/vio.h | 
|  | */ | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/mtio.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/cdev.h> | 
|  | #include <linux/major.h> | 
|  | #include <linux/completion.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/seq_file.h> | 
|  | #include <linux/smp_lock.h> | 
|  |  | 
|  | #include <asm/uaccess.h> | 
|  | #include <asm/ioctls.h> | 
|  | #include <asm/firmware.h> | 
|  | #include <asm/vio.h> | 
|  | #include <asm/iseries/vio.h> | 
|  | #include <asm/iseries/hv_lp_event.h> | 
|  | #include <asm/iseries/hv_call_event.h> | 
|  | #include <asm/iseries/hv_lp_config.h> | 
|  |  | 
|  | #define VIOTAPE_VERSION		"1.2" | 
|  | #define VIOTAPE_MAXREQ		1 | 
|  |  | 
|  | #define VIOTAPE_KERN_WARN	KERN_WARNING "viotape: " | 
|  | #define VIOTAPE_KERN_INFO	KERN_INFO "viotape: " | 
|  |  | 
|  | static int viotape_numdev; | 
|  |  | 
|  | /* | 
|  | * The minor number follows the conventions of the SCSI tape drives.  The | 
|  | * rewind and mode are encoded in the minor #.  We use this struct to break | 
|  | * them out | 
|  | */ | 
|  | struct viot_devinfo_struct { | 
|  | int devno; | 
|  | int mode; | 
|  | int rewind; | 
|  | }; | 
|  |  | 
|  | #define VIOTAPOP_RESET          0 | 
|  | #define VIOTAPOP_FSF	        1 | 
|  | #define VIOTAPOP_BSF	        2 | 
|  | #define VIOTAPOP_FSR	        3 | 
|  | #define VIOTAPOP_BSR	        4 | 
|  | #define VIOTAPOP_WEOF	        5 | 
|  | #define VIOTAPOP_REW	        6 | 
|  | #define VIOTAPOP_NOP	        7 | 
|  | #define VIOTAPOP_EOM	        8 | 
|  | #define VIOTAPOP_ERASE          9 | 
|  | #define VIOTAPOP_SETBLK        10 | 
|  | #define VIOTAPOP_SETDENSITY    11 | 
|  | #define VIOTAPOP_SETPOS	       12 | 
|  | #define VIOTAPOP_GETPOS	       13 | 
|  | #define VIOTAPOP_SETPART       14 | 
|  | #define VIOTAPOP_UNLOAD        15 | 
|  |  | 
|  | enum viotaperc { | 
|  | viotape_InvalidRange = 0x0601, | 
|  | viotape_InvalidToken = 0x0602, | 
|  | viotape_DMAError = 0x0603, | 
|  | viotape_UseError = 0x0604, | 
|  | viotape_ReleaseError = 0x0605, | 
|  | viotape_InvalidTape = 0x0606, | 
|  | viotape_InvalidOp = 0x0607, | 
|  | viotape_TapeErr = 0x0608, | 
|  |  | 
|  | viotape_AllocTimedOut = 0x0640, | 
|  | viotape_BOTEnc = 0x0641, | 
|  | viotape_BlankTape = 0x0642, | 
|  | viotape_BufferEmpty = 0x0643, | 
|  | viotape_CleanCartFound = 0x0644, | 
|  | viotape_CmdNotAllowed = 0x0645, | 
|  | viotape_CmdNotSupported = 0x0646, | 
|  | viotape_DataCheck = 0x0647, | 
|  | viotape_DecompressErr = 0x0648, | 
|  | viotape_DeviceTimeout = 0x0649, | 
|  | viotape_DeviceUnavail = 0x064a, | 
|  | viotape_DeviceBusy = 0x064b, | 
|  | viotape_EndOfMedia = 0x064c, | 
|  | viotape_EndOfTape = 0x064d, | 
|  | viotape_EquipCheck = 0x064e, | 
|  | viotape_InsufficientRs = 0x064f, | 
|  | viotape_InvalidLogBlk = 0x0650, | 
|  | viotape_LengthError = 0x0651, | 
|  | viotape_LibDoorOpen = 0x0652, | 
|  | viotape_LoadFailure = 0x0653, | 
|  | viotape_NotCapable = 0x0654, | 
|  | viotape_NotOperational = 0x0655, | 
|  | viotape_NotReady = 0x0656, | 
|  | viotape_OpCancelled = 0x0657, | 
|  | viotape_PhyLinkErr = 0x0658, | 
|  | viotape_RdyNotBOT = 0x0659, | 
|  | viotape_TapeMark = 0x065a, | 
|  | viotape_WriteProt = 0x065b | 
|  | }; | 
|  |  | 
|  | static const struct vio_error_entry viotape_err_table[] = { | 
|  | { viotape_InvalidRange, EIO, "Internal error" }, | 
|  | { viotape_InvalidToken, EIO, "Internal error" }, | 
|  | { viotape_DMAError, EIO, "DMA error" }, | 
|  | { viotape_UseError, EIO, "Internal error" }, | 
|  | { viotape_ReleaseError, EIO, "Internal error" }, | 
|  | { viotape_InvalidTape, EIO, "Invalid tape device" }, | 
|  | { viotape_InvalidOp, EIO, "Invalid operation" }, | 
|  | { viotape_TapeErr, EIO, "Tape error" }, | 
|  | { viotape_AllocTimedOut, EBUSY, "Allocate timed out" }, | 
|  | { viotape_BOTEnc, EIO, "Beginning of tape encountered" }, | 
|  | { viotape_BlankTape, EIO, "Blank tape" }, | 
|  | { viotape_BufferEmpty, EIO, "Buffer empty" }, | 
|  | { viotape_CleanCartFound, ENOMEDIUM, "Cleaning cartridge found" }, | 
|  | { viotape_CmdNotAllowed, EIO, "Command not allowed" }, | 
|  | { viotape_CmdNotSupported, EIO, "Command not supported" }, | 
|  | { viotape_DataCheck, EIO, "Data check" }, | 
|  | { viotape_DecompressErr, EIO, "Decompression error" }, | 
|  | { viotape_DeviceTimeout, EBUSY, "Device timeout" }, | 
|  | { viotape_DeviceUnavail, EIO, "Device unavailable" }, | 
|  | { viotape_DeviceBusy, EBUSY, "Device busy" }, | 
|  | { viotape_EndOfMedia, ENOSPC, "End of media" }, | 
|  | { viotape_EndOfTape, ENOSPC, "End of tape" }, | 
|  | { viotape_EquipCheck, EIO, "Equipment check" }, | 
|  | { viotape_InsufficientRs, EOVERFLOW, "Insufficient tape resources" }, | 
|  | { viotape_InvalidLogBlk, EIO, "Invalid logical block location" }, | 
|  | { viotape_LengthError, EOVERFLOW, "Length error" }, | 
|  | { viotape_LibDoorOpen, EBUSY, "Door open" }, | 
|  | { viotape_LoadFailure, ENOMEDIUM, "Load failure" }, | 
|  | { viotape_NotCapable, EIO, "Not capable" }, | 
|  | { viotape_NotOperational, EIO, "Not operational" }, | 
|  | { viotape_NotReady, EIO, "Not ready" }, | 
|  | { viotape_OpCancelled, EIO, "Operation cancelled" }, | 
|  | { viotape_PhyLinkErr, EIO, "Physical link error" }, | 
|  | { viotape_RdyNotBOT, EIO, "Ready but not beginning of tape" }, | 
|  | { viotape_TapeMark, EIO, "Tape mark" }, | 
|  | { viotape_WriteProt, EROFS, "Write protection error" }, | 
|  | { 0, 0, NULL }, | 
|  | }; | 
|  |  | 
|  | /* Maximum number of tapes we support */ | 
|  | #define VIOTAPE_MAX_TAPE	HVMAXARCHITECTEDVIRTUALTAPES | 
|  | #define MAX_PARTITIONS		4 | 
|  |  | 
|  | /* defines for current tape state */ | 
|  | #define VIOT_IDLE		0 | 
|  | #define VIOT_READING		1 | 
|  | #define VIOT_WRITING		2 | 
|  |  | 
|  | /* Our info on the tapes */ | 
|  | static struct { | 
|  | const char *rsrcname; | 
|  | const char *type; | 
|  | const char *model; | 
|  | } viotape_unitinfo[VIOTAPE_MAX_TAPE]; | 
|  |  | 
|  | static struct mtget viomtget[VIOTAPE_MAX_TAPE]; | 
|  |  | 
|  | static struct class *tape_class; | 
|  |  | 
|  | static struct device *tape_device[VIOTAPE_MAX_TAPE]; | 
|  |  | 
|  | /* | 
|  | * maintain the current state of each tape (and partition) | 
|  | * so that we know when to write EOF marks. | 
|  | */ | 
|  | static struct { | 
|  | unsigned char	cur_part; | 
|  | unsigned char	part_stat_rwi[MAX_PARTITIONS]; | 
|  | } state[VIOTAPE_MAX_TAPE]; | 
|  |  | 
|  | /* We single-thread */ | 
|  | static struct semaphore reqSem; | 
|  |  | 
|  | /* | 
|  | * When we send a request, we use this struct to get the response back | 
|  | * from the interrupt handler | 
|  | */ | 
|  | struct op_struct { | 
|  | void			*buffer; | 
|  | dma_addr_t		dmaaddr; | 
|  | size_t			count; | 
|  | int			rc; | 
|  | int			non_blocking; | 
|  | struct completion	com; | 
|  | struct device		*dev; | 
|  | struct op_struct	*next; | 
|  | }; | 
|  |  | 
|  | static spinlock_t	op_struct_list_lock; | 
|  | static struct op_struct	*op_struct_list; | 
|  |  | 
|  | /* forward declaration to resolve interdependence */ | 
|  | static int chg_state(int index, unsigned char new_state, struct file *file); | 
|  |  | 
|  | /* procfs support */ | 
|  | static int proc_viotape_show(struct seq_file *m, void *v) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | seq_printf(m, "viotape driver version " VIOTAPE_VERSION "\n"); | 
|  | for (i = 0; i < viotape_numdev; i++) { | 
|  | seq_printf(m, "viotape device %d is iSeries resource %10.10s" | 
|  | "type %4.4s, model %3.3s\n", | 
|  | i, viotape_unitinfo[i].rsrcname, | 
|  | viotape_unitinfo[i].type, | 
|  | viotape_unitinfo[i].model); | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int proc_viotape_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | return single_open(file, proc_viotape_show, NULL); | 
|  | } | 
|  |  | 
|  | static const struct file_operations proc_viotape_operations = { | 
|  | .owner		= THIS_MODULE, | 
|  | .open		= proc_viotape_open, | 
|  | .read		= seq_read, | 
|  | .llseek		= seq_lseek, | 
|  | .release	= single_release, | 
|  | }; | 
|  |  | 
|  | /* Decode the device minor number into its parts */ | 
|  | void get_dev_info(struct inode *ino, struct viot_devinfo_struct *devi) | 
|  | { | 
|  | devi->devno = iminor(ino) & 0x1F; | 
|  | devi->mode = (iminor(ino) & 0x60) >> 5; | 
|  | /* if bit is set in the minor, do _not_ rewind automatically */ | 
|  | devi->rewind = (iminor(ino) & 0x80) == 0; | 
|  | } | 
|  |  | 
|  | /* This is called only from the exit and init paths, so no need for locking */ | 
|  | static void clear_op_struct_pool(void) | 
|  | { | 
|  | while (op_struct_list) { | 
|  | struct op_struct *toFree = op_struct_list; | 
|  | op_struct_list = op_struct_list->next; | 
|  | kfree(toFree); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Likewise, this is only called from the init path */ | 
|  | static int add_op_structs(int structs) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < structs; ++i) { | 
|  | struct op_struct *new_struct = | 
|  | kmalloc(sizeof(*new_struct), GFP_KERNEL); | 
|  | if (!new_struct) { | 
|  | clear_op_struct_pool(); | 
|  | return -ENOMEM; | 
|  | } | 
|  | new_struct->next = op_struct_list; | 
|  | op_struct_list = new_struct; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Allocate an op structure from our pool */ | 
|  | static struct op_struct *get_op_struct(void) | 
|  | { | 
|  | struct op_struct *retval; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&op_struct_list_lock, flags); | 
|  | retval = op_struct_list; | 
|  | if (retval) | 
|  | op_struct_list = retval->next; | 
|  | spin_unlock_irqrestore(&op_struct_list_lock, flags); | 
|  | if (retval) { | 
|  | memset(retval, 0, sizeof(*retval)); | 
|  | init_completion(&retval->com); | 
|  | } | 
|  |  | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | /* Return an op structure to our pool */ | 
|  | static void free_op_struct(struct op_struct *op_struct) | 
|  | { | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&op_struct_list_lock, flags); | 
|  | op_struct->next = op_struct_list; | 
|  | op_struct_list = op_struct; | 
|  | spin_unlock_irqrestore(&op_struct_list_lock, flags); | 
|  | } | 
|  |  | 
|  | /* Map our tape return codes to errno values */ | 
|  | int tape_rc_to_errno(int tape_rc, char *operation, int tapeno) | 
|  | { | 
|  | const struct vio_error_entry *err; | 
|  |  | 
|  | if (tape_rc == 0) | 
|  | return 0; | 
|  |  | 
|  | err = vio_lookup_rc(viotape_err_table, tape_rc); | 
|  | printk(VIOTAPE_KERN_WARN "error(%s) 0x%04x on Device %d (%-10s): %s\n", | 
|  | operation, tape_rc, tapeno, | 
|  | viotape_unitinfo[tapeno].rsrcname, err->msg); | 
|  | return -err->errno; | 
|  | } | 
|  |  | 
|  | /* Write */ | 
|  | static ssize_t viotap_write(struct file *file, const char *buf, | 
|  | size_t count, loff_t * ppos) | 
|  | { | 
|  | HvLpEvent_Rc hvrc; | 
|  | unsigned short flags = file->f_flags; | 
|  | int noblock = ((flags & O_NONBLOCK) != 0); | 
|  | ssize_t ret; | 
|  | struct viot_devinfo_struct devi; | 
|  | struct op_struct *op = get_op_struct(); | 
|  |  | 
|  | if (op == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | get_dev_info(file->f_path.dentry->d_inode, &devi); | 
|  |  | 
|  | /* | 
|  | * We need to make sure we can send a request.  We use | 
|  | * a semaphore to keep track of # requests in use.  If | 
|  | * we are non-blocking, make sure we don't block on the | 
|  | * semaphore | 
|  | */ | 
|  | if (noblock) { | 
|  | if (down_trylock(&reqSem)) { | 
|  | ret = -EWOULDBLOCK; | 
|  | goto free_op; | 
|  | } | 
|  | } else | 
|  | down(&reqSem); | 
|  |  | 
|  | /* Allocate a DMA buffer */ | 
|  | op->dev = tape_device[devi.devno]; | 
|  | op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, | 
|  | GFP_ATOMIC); | 
|  |  | 
|  | if (op->buffer == NULL) { | 
|  | printk(VIOTAPE_KERN_WARN | 
|  | "error allocating dma buffer for len %ld\n", | 
|  | count); | 
|  | ret = -EFAULT; | 
|  | goto up_sem; | 
|  | } | 
|  |  | 
|  | /* Copy the data into the buffer */ | 
|  | if (copy_from_user(op->buffer, buf, count)) { | 
|  | printk(VIOTAPE_KERN_WARN "tape: error on copy from user\n"); | 
|  | ret = -EFAULT; | 
|  | goto free_dma; | 
|  | } | 
|  |  | 
|  | op->non_blocking = noblock; | 
|  | init_completion(&op->com); | 
|  | op->count = count; | 
|  |  | 
|  | hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | 
|  | HvLpEvent_Type_VirtualIo, | 
|  | viomajorsubtype_tape | viotapewrite, | 
|  | HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | 
|  | viopath_sourceinst(viopath_hostLp), | 
|  | viopath_targetinst(viopath_hostLp), | 
|  | (u64)(unsigned long)op, VIOVERSION << 16, | 
|  | ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); | 
|  | if (hvrc != HvLpEvent_Rc_Good) { | 
|  | printk(VIOTAPE_KERN_WARN "hv error on op %d\n", | 
|  | (int)hvrc); | 
|  | ret = -EIO; | 
|  | goto free_dma; | 
|  | } | 
|  |  | 
|  | if (noblock) | 
|  | return count; | 
|  |  | 
|  | wait_for_completion(&op->com); | 
|  |  | 
|  | if (op->rc) | 
|  | ret = tape_rc_to_errno(op->rc, "write", devi.devno); | 
|  | else { | 
|  | chg_state(devi.devno, VIOT_WRITING, file); | 
|  | ret = op->count; | 
|  | } | 
|  |  | 
|  | free_dma: | 
|  | dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); | 
|  | up_sem: | 
|  | up(&reqSem); | 
|  | free_op: | 
|  | free_op_struct(op); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* read */ | 
|  | static ssize_t viotap_read(struct file *file, char *buf, size_t count, | 
|  | loff_t *ptr) | 
|  | { | 
|  | HvLpEvent_Rc hvrc; | 
|  | unsigned short flags = file->f_flags; | 
|  | struct op_struct *op = get_op_struct(); | 
|  | int noblock = ((flags & O_NONBLOCK) != 0); | 
|  | ssize_t ret; | 
|  | struct viot_devinfo_struct devi; | 
|  |  | 
|  | if (op == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | get_dev_info(file->f_path.dentry->d_inode, &devi); | 
|  |  | 
|  | /* | 
|  | * We need to make sure we can send a request.  We use | 
|  | * a semaphore to keep track of # requests in use.  If | 
|  | * we are non-blocking, make sure we don't block on the | 
|  | * semaphore | 
|  | */ | 
|  | if (noblock) { | 
|  | if (down_trylock(&reqSem)) { | 
|  | ret = -EWOULDBLOCK; | 
|  | goto free_op; | 
|  | } | 
|  | } else | 
|  | down(&reqSem); | 
|  |  | 
|  | chg_state(devi.devno, VIOT_READING, file); | 
|  |  | 
|  | /* Allocate a DMA buffer */ | 
|  | op->dev = tape_device[devi.devno]; | 
|  | op->buffer = dma_alloc_coherent(op->dev, count, &op->dmaaddr, | 
|  | GFP_ATOMIC); | 
|  | if (op->buffer == NULL) { | 
|  | ret = -EFAULT; | 
|  | goto up_sem; | 
|  | } | 
|  |  | 
|  | op->count = count; | 
|  | init_completion(&op->com); | 
|  |  | 
|  | hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | 
|  | HvLpEvent_Type_VirtualIo, | 
|  | viomajorsubtype_tape | viotaperead, | 
|  | HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | 
|  | viopath_sourceinst(viopath_hostLp), | 
|  | viopath_targetinst(viopath_hostLp), | 
|  | (u64)(unsigned long)op, VIOVERSION << 16, | 
|  | ((u64)devi.devno << 48) | op->dmaaddr, count, 0, 0); | 
|  | if (hvrc != HvLpEvent_Rc_Good) { | 
|  | printk(VIOTAPE_KERN_WARN "tape hv error on op %d\n", | 
|  | (int)hvrc); | 
|  | ret = -EIO; | 
|  | goto free_dma; | 
|  | } | 
|  |  | 
|  | wait_for_completion(&op->com); | 
|  |  | 
|  | if (op->rc) | 
|  | ret = tape_rc_to_errno(op->rc, "read", devi.devno); | 
|  | else { | 
|  | ret = op->count; | 
|  | if (ret && copy_to_user(buf, op->buffer, ret)) { | 
|  | printk(VIOTAPE_KERN_WARN "error on copy_to_user\n"); | 
|  | ret = -EFAULT; | 
|  | } | 
|  | } | 
|  |  | 
|  | free_dma: | 
|  | dma_free_coherent(op->dev, count, op->buffer, op->dmaaddr); | 
|  | up_sem: | 
|  | up(&reqSem); | 
|  | free_op: | 
|  | free_op_struct(op); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* ioctl */ | 
|  | static int viotap_ioctl(struct inode *inode, struct file *file, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | HvLpEvent_Rc hvrc; | 
|  | int ret; | 
|  | struct viot_devinfo_struct devi; | 
|  | struct mtop mtc; | 
|  | u32 myOp; | 
|  | struct op_struct *op = get_op_struct(); | 
|  |  | 
|  | if (op == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | get_dev_info(file->f_path.dentry->d_inode, &devi); | 
|  |  | 
|  | down(&reqSem); | 
|  |  | 
|  | ret = -EINVAL; | 
|  |  | 
|  | switch (cmd) { | 
|  | case MTIOCTOP: | 
|  | ret = -EFAULT; | 
|  | /* | 
|  | * inode is null if and only if we (the kernel) | 
|  | * made the request | 
|  | */ | 
|  | if (inode == NULL) | 
|  | memcpy(&mtc, (void *) arg, sizeof(struct mtop)); | 
|  | else if (copy_from_user((char *)&mtc, (char *)arg, | 
|  | sizeof(struct mtop))) | 
|  | goto free_op; | 
|  |  | 
|  | ret = -EIO; | 
|  | switch (mtc.mt_op) { | 
|  | case MTRESET: | 
|  | myOp = VIOTAPOP_RESET; | 
|  | break; | 
|  | case MTFSF: | 
|  | myOp = VIOTAPOP_FSF; | 
|  | break; | 
|  | case MTBSF: | 
|  | myOp = VIOTAPOP_BSF; | 
|  | break; | 
|  | case MTFSR: | 
|  | myOp = VIOTAPOP_FSR; | 
|  | break; | 
|  | case MTBSR: | 
|  | myOp = VIOTAPOP_BSR; | 
|  | break; | 
|  | case MTWEOF: | 
|  | myOp = VIOTAPOP_WEOF; | 
|  | break; | 
|  | case MTREW: | 
|  | myOp = VIOTAPOP_REW; | 
|  | break; | 
|  | case MTNOP: | 
|  | myOp = VIOTAPOP_NOP; | 
|  | break; | 
|  | case MTEOM: | 
|  | myOp = VIOTAPOP_EOM; | 
|  | break; | 
|  | case MTERASE: | 
|  | myOp = VIOTAPOP_ERASE; | 
|  | break; | 
|  | case MTSETBLK: | 
|  | myOp = VIOTAPOP_SETBLK; | 
|  | break; | 
|  | case MTSETDENSITY: | 
|  | myOp = VIOTAPOP_SETDENSITY; | 
|  | break; | 
|  | case MTTELL: | 
|  | myOp = VIOTAPOP_GETPOS; | 
|  | break; | 
|  | case MTSEEK: | 
|  | myOp = VIOTAPOP_SETPOS; | 
|  | break; | 
|  | case MTSETPART: | 
|  | myOp = VIOTAPOP_SETPART; | 
|  | break; | 
|  | case MTOFFL: | 
|  | myOp = VIOTAPOP_UNLOAD; | 
|  | break; | 
|  | default: | 
|  | printk(VIOTAPE_KERN_WARN "MTIOCTOP called " | 
|  | "with invalid op 0x%x\n", mtc.mt_op); | 
|  | goto free_op; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * if we moved the head, we are no longer | 
|  | * reading or writing | 
|  | */ | 
|  | switch (mtc.mt_op) { | 
|  | case MTFSF: | 
|  | case MTBSF: | 
|  | case MTFSR: | 
|  | case MTBSR: | 
|  | case MTTELL: | 
|  | case MTSEEK: | 
|  | case MTREW: | 
|  | chg_state(devi.devno, VIOT_IDLE, file); | 
|  | } | 
|  |  | 
|  | init_completion(&op->com); | 
|  | hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | 
|  | HvLpEvent_Type_VirtualIo, | 
|  | viomajorsubtype_tape | viotapeop, | 
|  | HvLpEvent_AckInd_DoAck, | 
|  | HvLpEvent_AckType_ImmediateAck, | 
|  | viopath_sourceinst(viopath_hostLp), | 
|  | viopath_targetinst(viopath_hostLp), | 
|  | (u64)(unsigned long)op, | 
|  | VIOVERSION << 16, | 
|  | ((u64)devi.devno << 48), 0, | 
|  | (((u64)myOp) << 32) | mtc.mt_count, 0); | 
|  | if (hvrc != HvLpEvent_Rc_Good) { | 
|  | printk(VIOTAPE_KERN_WARN "hv error on op %d\n", | 
|  | (int)hvrc); | 
|  | goto free_op; | 
|  | } | 
|  | wait_for_completion(&op->com); | 
|  | ret = tape_rc_to_errno(op->rc, "tape operation", devi.devno); | 
|  | goto free_op; | 
|  |  | 
|  | case MTIOCGET: | 
|  | ret = -EIO; | 
|  | init_completion(&op->com); | 
|  | hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | 
|  | HvLpEvent_Type_VirtualIo, | 
|  | viomajorsubtype_tape | viotapegetstatus, | 
|  | HvLpEvent_AckInd_DoAck, | 
|  | HvLpEvent_AckType_ImmediateAck, | 
|  | viopath_sourceinst(viopath_hostLp), | 
|  | viopath_targetinst(viopath_hostLp), | 
|  | (u64)(unsigned long)op, VIOVERSION << 16, | 
|  | ((u64)devi.devno << 48), 0, 0, 0); | 
|  | if (hvrc != HvLpEvent_Rc_Good) { | 
|  | printk(VIOTAPE_KERN_WARN "hv error on op %d\n", | 
|  | (int)hvrc); | 
|  | goto free_op; | 
|  | } | 
|  | wait_for_completion(&op->com); | 
|  |  | 
|  | /* Operation is complete - grab the error code */ | 
|  | ret = tape_rc_to_errno(op->rc, "get status", devi.devno); | 
|  | free_op_struct(op); | 
|  | up(&reqSem); | 
|  |  | 
|  | if ((ret == 0) && copy_to_user((void *)arg, | 
|  | &viomtget[devi.devno], | 
|  | sizeof(viomtget[0]))) | 
|  | ret = -EFAULT; | 
|  | return ret; | 
|  | case MTIOCPOS: | 
|  | printk(VIOTAPE_KERN_WARN "Got an (unsupported) MTIOCPOS\n"); | 
|  | break; | 
|  | default: | 
|  | printk(VIOTAPE_KERN_WARN "got an unsupported ioctl 0x%0x\n", | 
|  | cmd); | 
|  | break; | 
|  | } | 
|  |  | 
|  | free_op: | 
|  | free_op_struct(op); | 
|  | up(&reqSem); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static long viotap_unlocked_ioctl(struct file *file, | 
|  | unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | long rc; | 
|  |  | 
|  | lock_kernel(); | 
|  | rc = viotap_ioctl(file->f_path.dentry->d_inode, file, cmd, arg); | 
|  | unlock_kernel(); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int viotap_open(struct inode *inode, struct file *file) | 
|  | { | 
|  | HvLpEvent_Rc hvrc; | 
|  | struct viot_devinfo_struct devi; | 
|  | int ret; | 
|  | struct op_struct *op = get_op_struct(); | 
|  |  | 
|  | if (op == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | lock_kernel(); | 
|  | get_dev_info(file->f_path.dentry->d_inode, &devi); | 
|  |  | 
|  | /* Note: We currently only support one mode! */ | 
|  | if ((devi.devno >= viotape_numdev) || (devi.mode)) { | 
|  | ret = -ENODEV; | 
|  | goto free_op; | 
|  | } | 
|  |  | 
|  | init_completion(&op->com); | 
|  |  | 
|  | hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | 
|  | HvLpEvent_Type_VirtualIo, | 
|  | viomajorsubtype_tape | viotapeopen, | 
|  | HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | 
|  | viopath_sourceinst(viopath_hostLp), | 
|  | viopath_targetinst(viopath_hostLp), | 
|  | (u64)(unsigned long)op, VIOVERSION << 16, | 
|  | ((u64)devi.devno << 48), 0, 0, 0); | 
|  | if (hvrc != 0) { | 
|  | printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", | 
|  | (int) hvrc); | 
|  | ret = -EIO; | 
|  | goto free_op; | 
|  | } | 
|  |  | 
|  | wait_for_completion(&op->com); | 
|  | ret = tape_rc_to_errno(op->rc, "open", devi.devno); | 
|  |  | 
|  | free_op: | 
|  | free_op_struct(op); | 
|  | unlock_kernel(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  |  | 
|  | static int viotap_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | HvLpEvent_Rc hvrc; | 
|  | struct viot_devinfo_struct devi; | 
|  | int ret = 0; | 
|  | struct op_struct *op = get_op_struct(); | 
|  |  | 
|  | if (op == NULL) | 
|  | return -ENOMEM; | 
|  | init_completion(&op->com); | 
|  |  | 
|  | get_dev_info(file->f_path.dentry->d_inode, &devi); | 
|  |  | 
|  | if (devi.devno >= viotape_numdev) { | 
|  | ret = -ENODEV; | 
|  | goto free_op; | 
|  | } | 
|  |  | 
|  | chg_state(devi.devno, VIOT_IDLE, file); | 
|  |  | 
|  | if (devi.rewind) { | 
|  | hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | 
|  | HvLpEvent_Type_VirtualIo, | 
|  | viomajorsubtype_tape | viotapeop, | 
|  | HvLpEvent_AckInd_DoAck, | 
|  | HvLpEvent_AckType_ImmediateAck, | 
|  | viopath_sourceinst(viopath_hostLp), | 
|  | viopath_targetinst(viopath_hostLp), | 
|  | (u64)(unsigned long)op, VIOVERSION << 16, | 
|  | ((u64)devi.devno << 48), 0, | 
|  | ((u64)VIOTAPOP_REW) << 32, 0); | 
|  | wait_for_completion(&op->com); | 
|  |  | 
|  | tape_rc_to_errno(op->rc, "rewind", devi.devno); | 
|  | } | 
|  |  | 
|  | hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, | 
|  | HvLpEvent_Type_VirtualIo, | 
|  | viomajorsubtype_tape | viotapeclose, | 
|  | HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, | 
|  | viopath_sourceinst(viopath_hostLp), | 
|  | viopath_targetinst(viopath_hostLp), | 
|  | (u64)(unsigned long)op, VIOVERSION << 16, | 
|  | ((u64)devi.devno << 48), 0, 0, 0); | 
|  | if (hvrc != 0) { | 
|  | printk(VIOTAPE_KERN_WARN "bad rc on signalLpEvent %d\n", | 
|  | (int) hvrc); | 
|  | ret = -EIO; | 
|  | goto free_op; | 
|  | } | 
|  |  | 
|  | wait_for_completion(&op->com); | 
|  |  | 
|  | if (op->rc) | 
|  | printk(VIOTAPE_KERN_WARN "close failed\n"); | 
|  |  | 
|  | free_op: | 
|  | free_op_struct(op); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | const struct file_operations viotap_fops = { | 
|  | .owner =		THIS_MODULE, | 
|  | .read =			viotap_read, | 
|  | .write =		viotap_write, | 
|  | .unlocked_ioctl =	viotap_unlocked_ioctl, | 
|  | .open =			viotap_open, | 
|  | .release =		viotap_release, | 
|  | }; | 
|  |  | 
|  | /* Handle interrupt events for tape */ | 
|  | static void vioHandleTapeEvent(struct HvLpEvent *event) | 
|  | { | 
|  | int tapeminor; | 
|  | struct op_struct *op; | 
|  | struct viotapelpevent *tevent = (struct viotapelpevent *)event; | 
|  |  | 
|  | if (event == NULL) { | 
|  | /* Notification that a partition went away! */ | 
|  | if (!viopath_isactive(viopath_hostLp)) { | 
|  | /* TODO! Clean up */ | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | tapeminor = event->xSubtype & VIOMINOR_SUBTYPE_MASK; | 
|  | op = (struct op_struct *)event->xCorrelationToken; | 
|  | switch (tapeminor) { | 
|  | case viotapeopen: | 
|  | case viotapeclose: | 
|  | op->rc = tevent->sub_type_result; | 
|  | complete(&op->com); | 
|  | break; | 
|  | case viotaperead: | 
|  | op->rc = tevent->sub_type_result; | 
|  | op->count = tevent->len; | 
|  | complete(&op->com); | 
|  | break; | 
|  | case viotapewrite: | 
|  | if (op->non_blocking) { | 
|  | dma_free_coherent(op->dev, op->count, | 
|  | op->buffer, op->dmaaddr); | 
|  | free_op_struct(op); | 
|  | up(&reqSem); | 
|  | } else { | 
|  | op->rc = tevent->sub_type_result; | 
|  | op->count = tevent->len; | 
|  | complete(&op->com); | 
|  | } | 
|  | break; | 
|  | case viotapeop: | 
|  | case viotapegetpos: | 
|  | case viotapesetpos: | 
|  | case viotapegetstatus: | 
|  | if (op) { | 
|  | op->count = tevent->u.op.count; | 
|  | op->rc = tevent->sub_type_result; | 
|  | if (!op->non_blocking) | 
|  | complete(&op->com); | 
|  | } | 
|  | break; | 
|  | default: | 
|  | printk(VIOTAPE_KERN_WARN "weird ack\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int viotape_probe(struct vio_dev *vdev, const struct vio_device_id *id) | 
|  | { | 
|  | int i = vdev->unit_address; | 
|  | int j; | 
|  | struct device_node *node = vdev->dev.archdata.of_node; | 
|  |  | 
|  | if (i > VIOTAPE_MAX_TAPE) | 
|  | return -ENODEV; | 
|  | if (!node) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (i >= viotape_numdev) | 
|  | viotape_numdev = i + 1; | 
|  |  | 
|  | tape_device[i] = &vdev->dev; | 
|  | viotape_unitinfo[i].rsrcname = of_get_property(node, | 
|  | "linux,vio_rsrcname", NULL); | 
|  | viotape_unitinfo[i].type = of_get_property(node, "linux,vio_type", | 
|  | NULL); | 
|  | viotape_unitinfo[i].model = of_get_property(node, "linux,vio_model", | 
|  | NULL); | 
|  |  | 
|  | state[i].cur_part = 0; | 
|  | for (j = 0; j < MAX_PARTITIONS; ++j) | 
|  | state[i].part_stat_rwi[j] = VIOT_IDLE; | 
|  | device_create_drvdata(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i), | 
|  | NULL, "iseries!vt%d", i); | 
|  | device_create_drvdata(tape_class, NULL, MKDEV(VIOTAPE_MAJOR, i | 0x80), | 
|  | NULL, "iseries!nvt%d", i); | 
|  | printk(VIOTAPE_KERN_INFO "tape iseries/vt%d is iSeries " | 
|  | "resource %10.10s type %4.4s, model %3.3s\n", | 
|  | i, viotape_unitinfo[i].rsrcname, | 
|  | viotape_unitinfo[i].type, viotape_unitinfo[i].model); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int viotape_remove(struct vio_dev *vdev) | 
|  | { | 
|  | int i = vdev->unit_address; | 
|  |  | 
|  | device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i | 0x80)); | 
|  | device_destroy(tape_class, MKDEV(VIOTAPE_MAJOR, i)); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * viotape_device_table: Used by vio.c to match devices that we | 
|  | * support. | 
|  | */ | 
|  | static struct vio_device_id viotape_device_table[] __devinitdata = { | 
|  | { "byte", "IBM,iSeries-viotape" }, | 
|  | { "", "" } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(vio, viotape_device_table); | 
|  |  | 
|  | static struct vio_driver viotape_driver = { | 
|  | .id_table = viotape_device_table, | 
|  | .probe = viotape_probe, | 
|  | .remove = viotape_remove, | 
|  | .driver = { | 
|  | .name = "viotape", | 
|  | .owner = THIS_MODULE, | 
|  | } | 
|  | }; | 
|  |  | 
|  |  | 
|  | int __init viotap_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!firmware_has_feature(FW_FEATURE_ISERIES)) | 
|  | return -ENODEV; | 
|  |  | 
|  | op_struct_list = NULL; | 
|  | if ((ret = add_op_structs(VIOTAPE_MAXREQ)) < 0) { | 
|  | printk(VIOTAPE_KERN_WARN "couldn't allocate op structs\n"); | 
|  | return ret; | 
|  | } | 
|  | spin_lock_init(&op_struct_list_lock); | 
|  |  | 
|  | sema_init(&reqSem, VIOTAPE_MAXREQ); | 
|  |  | 
|  | if (viopath_hostLp == HvLpIndexInvalid) { | 
|  | vio_set_hostlp(); | 
|  | if (viopath_hostLp == HvLpIndexInvalid) { | 
|  | ret = -ENODEV; | 
|  | goto clear_op; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, | 
|  | VIOTAPE_MAXREQ + 2); | 
|  | if (ret) { | 
|  | printk(VIOTAPE_KERN_WARN | 
|  | "error on viopath_open to hostlp %d\n", ret); | 
|  | ret = -EIO; | 
|  | goto clear_op; | 
|  | } | 
|  |  | 
|  | printk(VIOTAPE_KERN_INFO "vers " VIOTAPE_VERSION | 
|  | ", hosting partition %d\n", viopath_hostLp); | 
|  |  | 
|  | vio_setHandler(viomajorsubtype_tape, vioHandleTapeEvent); | 
|  |  | 
|  | ret = register_chrdev(VIOTAPE_MAJOR, "viotape", &viotap_fops); | 
|  | if (ret < 0) { | 
|  | printk(VIOTAPE_KERN_WARN "Error registering viotape device\n"); | 
|  | goto clear_handler; | 
|  | } | 
|  |  | 
|  | tape_class = class_create(THIS_MODULE, "tape"); | 
|  | if (IS_ERR(tape_class)) { | 
|  | printk(VIOTAPE_KERN_WARN "Unable to allocat class\n"); | 
|  | ret = PTR_ERR(tape_class); | 
|  | goto unreg_chrdev; | 
|  | } | 
|  |  | 
|  | ret = vio_register_driver(&viotape_driver); | 
|  | if (ret) | 
|  | goto unreg_class; | 
|  |  | 
|  | proc_create("iSeries/viotape", S_IFREG|S_IRUGO, NULL, | 
|  | &proc_viotape_operations); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | unreg_class: | 
|  | class_destroy(tape_class); | 
|  | unreg_chrdev: | 
|  | unregister_chrdev(VIOTAPE_MAJOR, "viotape"); | 
|  | clear_handler: | 
|  | vio_clearHandler(viomajorsubtype_tape); | 
|  | viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); | 
|  | clear_op: | 
|  | clear_op_struct_pool(); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Give a new state to the tape object */ | 
|  | static int chg_state(int index, unsigned char new_state, struct file *file) | 
|  | { | 
|  | unsigned char *cur_state = | 
|  | &state[index].part_stat_rwi[state[index].cur_part]; | 
|  | int rc = 0; | 
|  |  | 
|  | /* if the same state, don't bother */ | 
|  | if (*cur_state == new_state) | 
|  | return 0; | 
|  |  | 
|  | /* write an EOF if changing from writing to some other state */ | 
|  | if (*cur_state == VIOT_WRITING) { | 
|  | struct mtop write_eof = { MTWEOF, 1 }; | 
|  |  | 
|  | rc = viotap_ioctl(NULL, file, MTIOCTOP, | 
|  | (unsigned long)&write_eof); | 
|  | } | 
|  | *cur_state = new_state; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* Cleanup */ | 
|  | static void __exit viotap_exit(void) | 
|  | { | 
|  | remove_proc_entry("iSeries/viotape", NULL); | 
|  | vio_unregister_driver(&viotape_driver); | 
|  | class_destroy(tape_class); | 
|  | unregister_chrdev(VIOTAPE_MAJOR, "viotape"); | 
|  | viopath_close(viopath_hostLp, viomajorsubtype_tape, VIOTAPE_MAXREQ + 2); | 
|  | vio_clearHandler(viomajorsubtype_tape); | 
|  | clear_op_struct_pool(); | 
|  | } | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | module_init(viotap_init); | 
|  | module_exit(viotap_exit); |