include/asm-arm/arch-aaec2000/aaec2000.h - linux/kernel/git/davem/net - Git at Google


            
            /*

            
             *  linux/include/asm-arm/arch-aaec2000/aaec2000.h

            
             *

            
             *  AAEC-2000 registers definition

            
             *

            
             *  Copyright (c) 2005 Nicolas Bellido Y Ortega

            
             *

            
             *  This program is free software; you can redistribute it and/or modify

            
             *  it under the terms of the GNU General Public License version 2 as

            
             *  published by the Free Software Foundation.

            
             */


            #ifndef __ASM_ARCH_AAEC2000_H

            
            #define __ASM_ARCH_AAEC2000_H


            #ifndef __ASM_ARCH_HARDWARE_H

            
            #error You must include hardware.h not this file

            
            #endif /* __ASM_ARCH_HARDWARE_H */


            /* Chip selects */

            
            #define AAEC_CS0	0x00000000

            
            #define AAEC_CS1	0x10000000

            
            #define AAEC_CS2	0x20000000

            
            #define AAEC_CS3	0x30000000


            /* Flash */

            
            #define AAEC_FLASH_BASE	AAEC_CS0

            
            #define AAEC_FLASH_SIZE	SZ_64M


            /* Interrupt controller */

            
            #define IRQ_BASE	__REG(0x80000500)

            
            #define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */

            
            #define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */

            
            #define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */

            
            #define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */


            /* UART 1 */

            
            #define UART1_BASE	__REG(0x80000600)

            
            #define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */

            
            #define UART1_LCR	__REG(0x80000604) /* Link Control Register */

            
            #define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */

            
            #define UART1_CR	__REG(0x8000060c) /* Control Register */

            
            #define UART1_SR	__REG(0x80000610) /* Status Register */

            
            #define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */

            
            #define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */

            
            #define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */


            /* UART 2 */

            
            #define UART2_BASE	__REG(0x80000700)

            
            #define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */

            
            #define UART2_LCR	__REG(0x80000704) /* Link Control Register */

            
            #define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */

            
            #define UART2_CR	__REG(0x8000070c) /* Control Register */

            
            #define UART2_SR	__REG(0x80000710) /* Status Register */

            
            #define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */

            
            #define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */

            
            #define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */


            /* UART 3 */

            
            #define UART3_BASE	__REG(0x80000800)

            
            #define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */

            
            #define UART3_LCR	__REG(0x80000804) /* Link Control Register */

            
            #define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */

            
            #define UART3_CR	__REG(0x8000080c) /* Control Register */

            
            #define UART3_SR	__REG(0x80000810) /* Status Register */

            
            #define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */

            
            #define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */

            
            #define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */


            /* These are used in some places */

            
            #define _UART1_BASE __PREG(UART1_BASE)

            
            #define _UART2_BASE __PREG(UART2_BASE)

            
            #define _UART3_BASE __PREG(UART3_BASE)


            /* UART Registers Offsets */

            
            #define UART_DR		0x00

            
            #define UART_LCR	0x04

            
            #define UART_BRCR	0x08

            
            #define UART_CR		0x0c

            
            #define UART_SR		0x10

            
            #define UART_INT	0x14

            
            #define UART_INTM	0x18

            
            #define UART_INTRES	0x1c


            /* UART_LCR Bitmask */

            
            #define UART_LCR_BRK	(1 << 0) /* Send Break */

            
            #define UART_LCR_PEN	(1 << 1) /* Parity Enable */

            
            #define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */

            
            #define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */

            
            #define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */

            
            #define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */

            
            #define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */

            
            #define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */

            
            #define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */


            /* UART_CR Bitmask */

            
            #define UART_CR_EN	(1 << 0) /* UART Enable */

            
            #define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */

            
            #define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */

            
            #define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */

            
            #define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */

            
            #define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */

            
            #define UART_CR_LOOP	(1 << 6) /* Loopback Mode */


            /* UART_SR Bitmask */

            
            #define UART_SR_CTS	(1 << 0) /* Clear To Send Status */

            
            #define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */

            
            #define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */

            
            #define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */

            
            #define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */

            
            #define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */

            
            #define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */

            
            #define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */


            /* UART_INT Bitmask */

            
            #define UART_INT_RIS	(1 << 0) /* Rx Interrupt */

            
            #define UART_INT_TIS	(1 << 1) /* Tx Interrupt */

            
            #define UART_INT_MIS	(1 << 2) /* Modem Interrupt */

            
            #define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */


            /* Timer 1 */

            
            #define TIMER1_BASE	__REG(0x80000c00)

            
            #define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */

            
            #define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */

            
            #define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */

            
            #define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */


            /* Timer 2 */

            
            #define TIMER2_BASE	__REG(0x80000d00)

            
            #define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */

            
            #define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */

            
            #define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */

            
            #define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */


            /* Timer 3 */

            
            #define TIMER3_BASE	__REG(0x80000e00)

            
            #define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */

            
            #define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */

            
            #define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */

            
            #define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */


            /* Timer Control register bits */

            
            #define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start° Timer */

            
            #define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */

            
            #define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */

            
            #define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */

            
            #define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2)*/


            /* Power and State Control */

            
            #define POWER_BASE	__REG(0x80000400)

            
            #define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */

            
            #define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */

            
            #define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */

            
            #define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */

            
            #define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */

            
            #define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */

            
            #define POWER_TEOI	__REG(0x80000418) /* Tick EoI */

            
            #define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */

            
            #define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */


            /* GPIO Registers */

            
            #define AAEC_GPIO_PHYS	0x80000e00


            #define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)

            
            #define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)

            
            #define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)

            
            #define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)

            
            #define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)

            
            #define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)

            
            #define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)

            
            #define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)

            
            #define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)

            
            #define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)

            
            #define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)

            
            #define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)

            
            #define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)

            
            #define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)

            
            #define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)

            
            #define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)

            
            #define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)

            
            #define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)

            
            #define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)

            
            #define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)

            
            #define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)

            
            #define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)

            
            #define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)

            
            #define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)

            
            #define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)

            
            #define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)

            
            #define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)

            
            #define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)

            
            #define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)

            
            #define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)

            
            #define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)

            
            #define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)

            
            #define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)

            
            #define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)


            #define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)

            
            #define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)

            
            #define AAEC_GPIO_PINMUX_CODECON	(1 << 2)

            
            #define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)


            /* LCD Controller */

            
            #define AAEC_CLCD_PHYS	0x80003000


            #endif /* __ARM_ARCH_AAEC2000_H */
	/*
	* linux/include/asm-arm/arch-aaec2000/aaec2000.h
	*
	* AAEC-2000 registers definition
	*
	* Copyright (c) 2005 Nicolas Bellido Y Ortega
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#ifndef __ASM_ARCH_AAEC2000_H
	#define __ASM_ARCH_AAEC2000_H

	#ifndef __ASM_ARCH_HARDWARE_H
	#error You must include hardware.h not this file
	#endif /* __ASM_ARCH_HARDWARE_H */

	/* Chip selects */
	#define AAEC_CS0 0x00000000
	#define AAEC_CS1 0x10000000
	#define AAEC_CS2 0x20000000
	#define AAEC_CS3 0x30000000

	/* Flash */
	#define AAEC_FLASH_BASE AAEC_CS0
	#define AAEC_FLASH_SIZE SZ_64M

	/* Interrupt controller */
	#define IRQ_BASE __REG(0x80000500)
	#define IRQ_INTSR __REG(0x80000500) /* Int Status Register */
	#define IRQ_INTRSR __REG(0x80000504) /* Int Raw (unmasked) Status */
	#define IRQ_INTENS __REG(0x80000508) /* Int Enable Set */
	#define IRQ_INTENC __REG(0x8000050c) /* Int Enable Clear */

	/* UART 1 */
	#define UART1_BASE __REG(0x80000600)
	#define UART1_DR __REG(0x80000600) /* Data/FIFO Register */
	#define UART1_LCR __REG(0x80000604) /* Link Control Register */
	#define UART1_BRCR __REG(0x80000608) /* Baud Rate Control Register */
	#define UART1_CR __REG(0x8000060c) /* Control Register */
	#define UART1_SR __REG(0x80000610) /* Status Register */
	#define UART1_INT __REG(0x80000614) /* Interrupt Status Register */
	#define UART1_INTM __REG(0x80000618) /* Interrupt Mask Register */
	#define UART1_INTRES __REG(0x8000061c) /* Int Result (masked status) Register */

	/* UART 2 */
	#define UART2_BASE __REG(0x80000700)
	#define UART2_DR __REG(0x80000700) /* Data/FIFO Register */
	#define UART2_LCR __REG(0x80000704) /* Link Control Register */
	#define UART2_BRCR __REG(0x80000708) /* Baud Rate Control Register */
	#define UART2_CR __REG(0x8000070c) /* Control Register */
	#define UART2_SR __REG(0x80000710) /* Status Register */
	#define UART2_INT __REG(0x80000714) /* Interrupt Status Register */
	#define UART2_INTM __REG(0x80000718) /* Interrupt Mask Register */
	#define UART2_INTRES __REG(0x8000071c) /* Int Result (masked status) Register */

	/* UART 3 */
	#define UART3_BASE __REG(0x80000800)
	#define UART3_DR __REG(0x80000800) /* Data/FIFO Register */
	#define UART3_LCR __REG(0x80000804) /* Link Control Register */
	#define UART3_BRCR __REG(0x80000808) /* Baud Rate Control Register */
	#define UART3_CR __REG(0x8000080c) /* Control Register */
	#define UART3_SR __REG(0x80000810) /* Status Register */
	#define UART3_INT __REG(0x80000814) /* Interrupt Status Register */
	#define UART3_INTM __REG(0x80000818) /* Interrupt Mask Register */
	#define UART3_INTRES __REG(0x8000081c) /* Int Result (masked status) Register */

	/* These are used in some places */
	#define _UART1_BASE __PREG(UART1_BASE)
	#define _UART2_BASE __PREG(UART2_BASE)
	#define _UART3_BASE __PREG(UART3_BASE)

	/* UART Registers Offsets */
	#define UART_DR 0x00
	#define UART_LCR 0x04
	#define UART_BRCR 0x08
	#define UART_CR 0x0c
	#define UART_SR 0x10
	#define UART_INT 0x14
	#define UART_INTM 0x18
	#define UART_INTRES 0x1c

	/* UART_LCR Bitmask */
	#define UART_LCR_BRK (1 << 0) /* Send Break */
	#define UART_LCR_PEN (1 << 1) /* Parity Enable */
	#define UART_LCR_EP (1 << 2) /* Even/Odd Parity */
	#define UART_LCR_S2 (1 << 3) /* One/Two Stop bits */
	#define UART_LCR_FIFO (1 << 4) /* FIFO Enable */
	#define UART_LCR_WL5 (0 << 5) /* Word Length - 5 bits */
	#define UART_LCR_WL6 (1 << 5) /* Word Length - 6 bits */
	#define UART_LCR_WL7 (1 << 6) /* Word Length - 7 bits */
	#define UART_LCR_WL8 (1 << 7) /* Word Length - 8 bits */

	/* UART_CR Bitmask */
	#define UART_CR_EN (1 << 0) /* UART Enable */
	#define UART_CR_SIR (1 << 1) /* IrDA SIR Enable */
	#define UART_CR_SIRLP (1 << 2) /* Low Power IrDA Enable */
	#define UART_CR_RXP (1 << 3) /* Receive Pin Polarity */
	#define UART_CR_TXP (1 << 4) /* Transmit Pin Polarity */
	#define UART_CR_MXP (1 << 5) /* Modem Pin Polarity */
	#define UART_CR_LOOP (1 << 6) /* Loopback Mode */

	/* UART_SR Bitmask */
	#define UART_SR_CTS (1 << 0) /* Clear To Send Status */
	#define UART_SR_DSR (1 << 1) /* Data Set Ready Status */
	#define UART_SR_DCD (1 << 2) /* Data Carrier Detect Status */
	#define UART_SR_TxBSY (1 << 3) /* Transmitter Busy Status */
	#define UART_SR_RxFE (1 << 4) /* Receive FIFO Empty Status */
	#define UART_SR_TxFF (1 << 5) /* Transmit FIFO Full Status */
	#define UART_SR_RxFF (1 << 6) /* Receive FIFO Full Status */
	#define UART_SR_TxFE (1 << 7) /* Transmit FIFO Empty Status */

	/* UART_INT Bitmask */
	#define UART_INT_RIS (1 << 0) /* Rx Interrupt */
	#define UART_INT_TIS (1 << 1) /* Tx Interrupt */
	#define UART_INT_MIS (1 << 2) /* Modem Interrupt */
	#define UART_INT_RTIS (1 << 3) /* Receive Timeout Interrupt */

	/* Timer 1 */
	#define TIMER1_BASE __REG(0x80000c00)
	#define TIMER1_LOAD __REG(0x80000c00) /* Timer 1 Load Register */
	#define TIMER1_VAL __REG(0x80000c04) /* Timer 1 Value Register */
	#define TIMER1_CTRL __REG(0x80000c08) /* Timer 1 Control Register */
	#define TIMER1_CLEAR __REG(0x80000c0c) /* Timer 1 Clear Register */

	/* Timer 2 */
	#define TIMER2_BASE __REG(0x80000d00)
	#define TIMER2_LOAD __REG(0x80000d00) /* Timer 2 Load Register */
	#define TIMER2_VAL __REG(0x80000d04) /* Timer 2 Value Register */
	#define TIMER2_CTRL __REG(0x80000d08) /* Timer 2 Control Register */
	#define TIMER2_CLEAR __REG(0x80000d0c) /* Timer 2 Clear Register */

	/* Timer 3 */
	#define TIMER3_BASE __REG(0x80000e00)
	#define TIMER3_LOAD __REG(0x80000e00) /* Timer 3 Load Register */
	#define TIMER3_VAL __REG(0x80000e04) /* Timer 3 Value Register */
	#define TIMER3_CTRL __REG(0x80000e08) /* Timer 3 Control Register */
	#define TIMER3_CLEAR __REG(0x80000e0c) /* Timer 3 Clear Register */

	/* Timer Control register bits */
	#define TIMER_CTRL_ENABLE (1 << 7) /* Enable (Start° Timer */
	#define TIMER_CTRL_PERIODIC (1 << 6) /* Periodic Running Mode */
	#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
	#define TIMER_CTRL_CLKSEL_508K (1 << 3) /* 508KHz Clock select (Timer 1, 2) */
	#define TIMER_CTRL_CLKSEL_2K (0 << 3) /* 2KHz Clock Select (Timer 1, 2)*/

	/* Power and State Control */
	#define POWER_BASE __REG(0x80000400)
	#define POWER_PWRSR __REG(0x80000400) /* Power Status Register */
	#define POWER_PWRCNT __REG(0x80000404) /* Power/Clock control */
	#define POWER_HALT __REG(0x80000408) /* Power Idle Mode */
	#define POWER_STDBY __REG(0x8000040c) /* Power Standby Mode */
	#define POWER_BLEOI __REG(0x80000410) /* Battery Low End of Interrupt */
	#define POWER_MCEOI __REG(0x80000414) /* Media Changed EoI */
	#define POWER_TEOI __REG(0x80000418) /* Tick EoI */
	#define POWER_STFCLR __REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
	#define POWER_CLKSET __REG(0x80000420) /* Clock Speed Control */

	/* GPIO Registers */
	#define AAEC_GPIO_PHYS 0x80000e00

	#define AAEC_GPIO_PADR __REG(AAEC_GPIO_PHYS + 0x00)
	#define AAEC_GPIO_PBDR __REG(AAEC_GPIO_PHYS + 0x04)
	#define AAEC_GPIO_PCDR __REG(AAEC_GPIO_PHYS + 0x08)
	#define AAEC_GPIO_PDDR __REG(AAEC_GPIO_PHYS + 0x0c)
	#define AAEC_GPIO_PADDR __REG(AAEC_GPIO_PHYS + 0x10)
	#define AAEC_GPIO_PBDDR __REG(AAEC_GPIO_PHYS + 0x14)
	#define AAEC_GPIO_PCDDR __REG(AAEC_GPIO_PHYS + 0x18)
	#define AAEC_GPIO_PDDDR __REG(AAEC_GPIO_PHYS + 0x1c)
	#define AAEC_GPIO_PEDR __REG(AAEC_GPIO_PHYS + 0x20)
	#define AAEC_GPIO_PEDDR __REG(AAEC_GPIO_PHYS + 0x24)
	#define AAEC_GPIO_KSCAN __REG(AAEC_GPIO_PHYS + 0x28)
	#define AAEC_GPIO_PINMUX __REG(AAEC_GPIO_PHYS + 0x2c)
	#define AAEC_GPIO_PFDR __REG(AAEC_GPIO_PHYS + 0x30)
	#define AAEC_GPIO_PFDDR __REG(AAEC_GPIO_PHYS + 0x34)
	#define AAEC_GPIO_PGDR __REG(AAEC_GPIO_PHYS + 0x38)
	#define AAEC_GPIO_PGDDR __REG(AAEC_GPIO_PHYS + 0x3c)
	#define AAEC_GPIO_PHDR __REG(AAEC_GPIO_PHYS + 0x40)
	#define AAEC_GPIO_PHDDR __REG(AAEC_GPIO_PHYS + 0x44)
	#define AAEC_GPIO_RAZ __REG(AAEC_GPIO_PHYS + 0x48)
	#define AAEC_GPIO_INTTYPE1 __REG(AAEC_GPIO_PHYS + 0x4c)
	#define AAEC_GPIO_INTTYPE2 __REG(AAEC_GPIO_PHYS + 0x50)
	#define AAEC_GPIO_FEOI __REG(AAEC_GPIO_PHYS + 0x54)
	#define AAEC_GPIO_INTEN __REG(AAEC_GPIO_PHYS + 0x58)
	#define AAEC_GPIO_INTSTATUS __REG(AAEC_GPIO_PHYS + 0x5c)
	#define AAEC_GPIO_RAWINTSTATUS __REG(AAEC_GPIO_PHYS + 0x60)
	#define AAEC_GPIO_DB __REG(AAEC_GPIO_PHYS + 0x64)
	#define AAEC_GPIO_PAPINDR __REG(AAEC_GPIO_PHYS + 0x68)
	#define AAEC_GPIO_PBPINDR __REG(AAEC_GPIO_PHYS + 0x6c)
	#define AAEC_GPIO_PCPINDR __REG(AAEC_GPIO_PHYS + 0x70)
	#define AAEC_GPIO_PDPINDR __REG(AAEC_GPIO_PHYS + 0x74)
	#define AAEC_GPIO_PEPINDR __REG(AAEC_GPIO_PHYS + 0x78)
	#define AAEC_GPIO_PFPINDR __REG(AAEC_GPIO_PHYS + 0x7c)
	#define AAEC_GPIO_PGPINDR __REG(AAEC_GPIO_PHYS + 0x80)
	#define AAEC_GPIO_PHPINDR __REG(AAEC_GPIO_PHYS + 0x84)

	#define AAEC_GPIO_PINMUX_PE0CON (1 << 0)
	#define AAEC_GPIO_PINMUX_PD0CON (1 << 1)
	#define AAEC_GPIO_PINMUX_CODECON (1 << 2)
	#define AAEC_GPIO_PINMUX_UART3CON (1 << 3)

	/* LCD Controller */
	#define AAEC_CLCD_PHYS 0x80003000

	#endif /* __ARM_ARCH_AAEC2000_H */