|  | // SPDX-License-Identifier: GPL-2.0+ | 
|  | /* | 
|  | * NOP USB transceiver for all USB transceiver which are either built-in | 
|  | * into USB IP or which are mostly autonomous. | 
|  | * | 
|  | * Copyright (C) 2009 Texas Instruments Inc | 
|  | * Author: Ajay Kumar Gupta <ajay.gupta@ti.com> | 
|  | * | 
|  | * Current status: | 
|  | *	This provides a "nop" transceiver for PHYs which are | 
|  | *	autonomous such as isp1504, isp1707, etc. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/usb/gadget.h> | 
|  | #include <linux/usb/otg.h> | 
|  | #include <linux/usb/usb_phy_generic.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/delay.h> | 
|  |  | 
|  | #include "phy-generic.h" | 
|  |  | 
|  | #define VBUS_IRQ_FLAGS \ | 
|  | (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \ | 
|  | IRQF_ONESHOT) | 
|  |  | 
|  | struct platform_device *usb_phy_generic_register(void) | 
|  | { | 
|  | return platform_device_register_simple("usb_phy_generic", | 
|  | PLATFORM_DEVID_AUTO, NULL, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_phy_generic_register); | 
|  |  | 
|  | void usb_phy_generic_unregister(struct platform_device *pdev) | 
|  | { | 
|  | platform_device_unregister(pdev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_phy_generic_unregister); | 
|  |  | 
|  | static int nop_set_suspend(struct usb_phy *x, int suspend) | 
|  | { | 
|  | struct usb_phy_generic *nop = dev_get_drvdata(x->dev); | 
|  |  | 
|  | if (!IS_ERR(nop->clk)) { | 
|  | if (suspend) | 
|  | clk_disable_unprepare(nop->clk); | 
|  | else | 
|  | clk_prepare_enable(nop->clk); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void nop_reset(struct usb_phy_generic *nop) | 
|  | { | 
|  | if (!nop->gpiod_reset) | 
|  | return; | 
|  |  | 
|  | gpiod_set_value_cansleep(nop->gpiod_reset, 1); | 
|  | usleep_range(10000, 20000); | 
|  | gpiod_set_value_cansleep(nop->gpiod_reset, 0); | 
|  | } | 
|  |  | 
|  | /* interface to regulator framework */ | 
|  | static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA) | 
|  | { | 
|  | struct regulator *vbus_draw = nop->vbus_draw; | 
|  | int enabled; | 
|  | int ret; | 
|  |  | 
|  | if (!vbus_draw) | 
|  | return; | 
|  |  | 
|  | enabled = nop->vbus_draw_enabled; | 
|  | if (mA) { | 
|  | regulator_set_current_limit(vbus_draw, 0, 1000 * mA); | 
|  | if (!enabled) { | 
|  | ret = regulator_enable(vbus_draw); | 
|  | if (ret < 0) | 
|  | return; | 
|  | nop->vbus_draw_enabled = 1; | 
|  | } | 
|  | } else { | 
|  | if (enabled) { | 
|  | ret = regulator_disable(vbus_draw); | 
|  | if (ret < 0) | 
|  | return; | 
|  | nop->vbus_draw_enabled = 0; | 
|  | } | 
|  | } | 
|  | nop->mA = mA; | 
|  | } | 
|  |  | 
|  |  | 
|  | static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) | 
|  | { | 
|  | struct usb_phy_generic *nop = data; | 
|  | struct usb_otg *otg = nop->phy.otg; | 
|  | int vbus, status; | 
|  |  | 
|  | vbus = gpiod_get_value(nop->gpiod_vbus); | 
|  | if ((vbus ^ nop->vbus) == 0) | 
|  | return IRQ_HANDLED; | 
|  | nop->vbus = vbus; | 
|  |  | 
|  | if (vbus) { | 
|  | status = USB_EVENT_VBUS; | 
|  | otg->state = OTG_STATE_B_PERIPHERAL; | 
|  | nop->phy.last_event = status; | 
|  |  | 
|  | /* drawing a "unit load" is *always* OK, except for OTG */ | 
|  | nop_set_vbus_draw(nop, 100); | 
|  |  | 
|  | atomic_notifier_call_chain(&nop->phy.notifier, status, | 
|  | otg->gadget); | 
|  | } else { | 
|  | nop_set_vbus_draw(nop, 0); | 
|  |  | 
|  | status = USB_EVENT_NONE; | 
|  | otg->state = OTG_STATE_B_IDLE; | 
|  | nop->phy.last_event = status; | 
|  |  | 
|  | atomic_notifier_call_chain(&nop->phy.notifier, status, | 
|  | otg->gadget); | 
|  | } | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | int usb_gen_phy_init(struct usb_phy *phy) | 
|  | { | 
|  | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); | 
|  | int ret; | 
|  |  | 
|  | if (!IS_ERR(nop->vcc)) { | 
|  | if (regulator_enable(nop->vcc)) | 
|  | dev_err(phy->dev, "Failed to enable power\n"); | 
|  | } | 
|  |  | 
|  | if (!IS_ERR(nop->clk)) { | 
|  | ret = clk_prepare_enable(nop->clk); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | nop_reset(nop); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_gen_phy_init); | 
|  |  | 
|  | void usb_gen_phy_shutdown(struct usb_phy *phy) | 
|  | { | 
|  | struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); | 
|  |  | 
|  | gpiod_set_value_cansleep(nop->gpiod_reset, 1); | 
|  |  | 
|  | if (!IS_ERR(nop->clk)) | 
|  | clk_disable_unprepare(nop->clk); | 
|  |  | 
|  | if (!IS_ERR(nop->vcc)) { | 
|  | if (regulator_disable(nop->vcc)) | 
|  | dev_err(phy->dev, "Failed to disable power\n"); | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown); | 
|  |  | 
|  | static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) | 
|  | { | 
|  | if (!otg) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!gadget) { | 
|  | otg->gadget = NULL; | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | otg->gadget = gadget; | 
|  | if (otg->state == OTG_STATE_B_PERIPHERAL) | 
|  | atomic_notifier_call_chain(&otg->usb_phy->notifier, | 
|  | USB_EVENT_VBUS, otg->gadget); | 
|  | else | 
|  | otg->state = OTG_STATE_B_IDLE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) | 
|  | { | 
|  | if (!otg) | 
|  | return -ENODEV; | 
|  |  | 
|  | if (!host) { | 
|  | otg->host = NULL; | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | otg->host = host; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop, | 
|  | struct usb_phy_generic_platform_data *pdata) | 
|  | { | 
|  | enum usb_phy_type type = USB_PHY_TYPE_USB2; | 
|  | int err = 0; | 
|  |  | 
|  | u32 clk_rate = 0; | 
|  | bool needs_vcc = false, needs_clk = false; | 
|  |  | 
|  | if (dev->of_node) { | 
|  | struct device_node *node = dev->of_node; | 
|  |  | 
|  | if (of_property_read_u32(node, "clock-frequency", &clk_rate)) | 
|  | clk_rate = 0; | 
|  |  | 
|  | needs_vcc = of_property_read_bool(node, "vcc-supply"); | 
|  | needs_clk = of_property_read_bool(node, "clocks"); | 
|  | nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", | 
|  | GPIOD_ASIS); | 
|  | err = PTR_ERR_OR_ZERO(nop->gpiod_reset); | 
|  | if (!err) { | 
|  | nop->gpiod_vbus = devm_gpiod_get_optional(dev, | 
|  | "vbus-detect", | 
|  | GPIOD_ASIS); | 
|  | err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); | 
|  | } | 
|  | } else if (pdata) { | 
|  | type = pdata->type; | 
|  | clk_rate = pdata->clk_rate; | 
|  | needs_vcc = pdata->needs_vcc; | 
|  | if (gpio_is_valid(pdata->gpio_reset)) { | 
|  | err = devm_gpio_request_one(dev, pdata->gpio_reset, | 
|  | GPIOF_ACTIVE_LOW, | 
|  | dev_name(dev)); | 
|  | if (!err) | 
|  | nop->gpiod_reset = | 
|  | gpio_to_desc(pdata->gpio_reset); | 
|  | } | 
|  | nop->gpiod_vbus = pdata->gpiod_vbus; | 
|  | } | 
|  |  | 
|  | if (err == -EPROBE_DEFER) | 
|  | return -EPROBE_DEFER; | 
|  | if (err) { | 
|  | dev_err(dev, "Error requesting RESET or VBUS GPIO\n"); | 
|  | return err; | 
|  | } | 
|  | if (nop->gpiod_reset) | 
|  | gpiod_direction_output(nop->gpiod_reset, 1); | 
|  |  | 
|  | nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), | 
|  | GFP_KERNEL); | 
|  | if (!nop->phy.otg) | 
|  | return -ENOMEM; | 
|  |  | 
|  | nop->clk = devm_clk_get(dev, "main_clk"); | 
|  | if (IS_ERR(nop->clk)) { | 
|  | dev_dbg(dev, "Can't get phy clock: %ld\n", | 
|  | PTR_ERR(nop->clk)); | 
|  | if (needs_clk) | 
|  | return PTR_ERR(nop->clk); | 
|  | } | 
|  |  | 
|  | if (!IS_ERR(nop->clk) && clk_rate) { | 
|  | err = clk_set_rate(nop->clk, clk_rate); | 
|  | if (err) { | 
|  | dev_err(dev, "Error setting clock rate\n"); | 
|  | return err; | 
|  | } | 
|  | } | 
|  |  | 
|  | nop->vcc = devm_regulator_get(dev, "vcc"); | 
|  | if (IS_ERR(nop->vcc)) { | 
|  | dev_dbg(dev, "Error getting vcc regulator: %ld\n", | 
|  | PTR_ERR(nop->vcc)); | 
|  | if (needs_vcc) | 
|  | return -EPROBE_DEFER; | 
|  | } | 
|  |  | 
|  | nop->dev		= dev; | 
|  | nop->phy.dev		= nop->dev; | 
|  | nop->phy.label		= "nop-xceiv"; | 
|  | nop->phy.set_suspend	= nop_set_suspend; | 
|  | nop->phy.type		= type; | 
|  |  | 
|  | nop->phy.otg->state		= OTG_STATE_UNDEFINED; | 
|  | nop->phy.otg->usb_phy		= &nop->phy; | 
|  | nop->phy.otg->set_host		= nop_set_host; | 
|  | nop->phy.otg->set_peripheral	= nop_set_peripheral; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); | 
|  |  | 
|  | static int usb_phy_generic_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device *dev = &pdev->dev; | 
|  | struct usb_phy_generic	*nop; | 
|  | int err; | 
|  |  | 
|  | nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); | 
|  | if (!nop) | 
|  | return -ENOMEM; | 
|  |  | 
|  | err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev)); | 
|  | if (err) | 
|  | return err; | 
|  | if (nop->gpiod_vbus) { | 
|  | err = devm_request_threaded_irq(&pdev->dev, | 
|  | gpiod_to_irq(nop->gpiod_vbus), | 
|  | NULL, nop_gpio_vbus_thread, | 
|  | VBUS_IRQ_FLAGS, "vbus_detect", | 
|  | nop); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "can't request irq %i, err: %d\n", | 
|  | gpiod_to_irq(nop->gpiod_vbus), err); | 
|  | return err; | 
|  | } | 
|  | nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ? | 
|  | OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE; | 
|  | } | 
|  |  | 
|  | nop->phy.init		= usb_gen_phy_init; | 
|  | nop->phy.shutdown	= usb_gen_phy_shutdown; | 
|  |  | 
|  | err = usb_add_phy_dev(&nop->phy); | 
|  | if (err) { | 
|  | dev_err(&pdev->dev, "can't register transceiver, err: %d\n", | 
|  | err); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, nop); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usb_phy_generic_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct usb_phy_generic *nop = platform_get_drvdata(pdev); | 
|  |  | 
|  | usb_remove_phy(&nop->phy); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id nop_xceiv_dt_ids[] = { | 
|  | { .compatible = "usb-nop-xceiv" }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); | 
|  |  | 
|  | static struct platform_driver usb_phy_generic_driver = { | 
|  | .probe		= usb_phy_generic_probe, | 
|  | .remove		= usb_phy_generic_remove, | 
|  | .driver		= { | 
|  | .name	= "usb_phy_generic", | 
|  | .of_match_table = nop_xceiv_dt_ids, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init usb_phy_generic_init(void) | 
|  | { | 
|  | return platform_driver_register(&usb_phy_generic_driver); | 
|  | } | 
|  | subsys_initcall(usb_phy_generic_init); | 
|  |  | 
|  | static void __exit usb_phy_generic_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&usb_phy_generic_driver); | 
|  | } | 
|  | module_exit(usb_phy_generic_exit); | 
|  |  | 
|  | MODULE_ALIAS("platform:usb_phy_generic"); | 
|  | MODULE_AUTHOR("Texas Instruments Inc"); | 
|  | MODULE_DESCRIPTION("NOP USB Transceiver driver"); | 
|  | MODULE_LICENSE("GPL"); |