|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * ADM1177 Hot Swap Controller and Digital Power Monitor with Soft Start Pin | 
|  | * | 
|  | * Copyright 2015-2019 Analog Devices Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/bits.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  |  | 
|  | /*  Command Byte Operations */ | 
|  | #define ADM1177_CMD_V_CONT	BIT(0) | 
|  | #define ADM1177_CMD_I_CONT	BIT(2) | 
|  | #define ADM1177_CMD_VRANGE	BIT(4) | 
|  |  | 
|  | /* Extended Register */ | 
|  | #define ADM1177_REG_ALERT_TH	2 | 
|  |  | 
|  | #define ADM1177_BITS		12 | 
|  |  | 
|  | /** | 
|  | * struct adm1177_state - driver instance specific data | 
|  | * @client		pointer to i2c client | 
|  | * @reg			regulator info for the the power supply of the device | 
|  | * @r_sense_uohm	current sense resistor value | 
|  | * @alert_threshold_ua	current limit for shutdown | 
|  | * @vrange_high		internal voltage divider | 
|  | */ | 
|  | struct adm1177_state { | 
|  | struct i2c_client	*client; | 
|  | struct regulator	*reg; | 
|  | u32			r_sense_uohm; | 
|  | u32			alert_threshold_ua; | 
|  | bool			vrange_high; | 
|  | }; | 
|  |  | 
|  | static int adm1177_read_raw(struct adm1177_state *st, u8 num, u8 *data) | 
|  | { | 
|  | return i2c_master_recv(st->client, data, num); | 
|  | } | 
|  |  | 
|  | static int adm1177_write_cmd(struct adm1177_state *st, u8 cmd) | 
|  | { | 
|  | return i2c_smbus_write_byte(st->client, cmd); | 
|  | } | 
|  |  | 
|  | static int adm1177_write_alert_thr(struct adm1177_state *st, | 
|  | u32 alert_threshold_ua) | 
|  | { | 
|  | u64 val; | 
|  | int ret; | 
|  |  | 
|  | val = 0xFFULL * alert_threshold_ua * st->r_sense_uohm; | 
|  | val = div_u64(val, 105840000U); | 
|  | val = div_u64(val, 1000U); | 
|  | if (val > 0xFF) | 
|  | val = 0xFF; | 
|  |  | 
|  | ret = i2c_smbus_write_byte_data(st->client, ADM1177_REG_ALERT_TH, | 
|  | val); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | st->alert_threshold_ua = alert_threshold_ua; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int adm1177_read(struct device *dev, enum hwmon_sensor_types type, | 
|  | u32 attr, int channel, long *val) | 
|  | { | 
|  | struct adm1177_state *st = dev_get_drvdata(dev); | 
|  | u8 data[3]; | 
|  | long dummy; | 
|  | int ret; | 
|  |  | 
|  | switch (type) { | 
|  | case hwmon_curr: | 
|  | switch (attr) { | 
|  | case hwmon_curr_input: | 
|  | ret = adm1177_read_raw(st, 3, data); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | dummy = (data[1] << 4) | (data[2] & 0xF); | 
|  | /* | 
|  | * convert to milliamperes | 
|  | * ((105.84mV / 4096) x raw) / senseResistor(ohm) | 
|  | */ | 
|  | *val = div_u64((105840000ull * dummy), | 
|  | 4096 * st->r_sense_uohm); | 
|  | return 0; | 
|  | case hwmon_curr_max_alarm: | 
|  | *val = st->alert_threshold_ua; | 
|  | return 0; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | case hwmon_in: | 
|  | ret = adm1177_read_raw(st, 3, data); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | dummy = (data[0] << 4) | (data[2] >> 4); | 
|  | /* | 
|  | * convert to millivolts based on resistor devision | 
|  | * (V_fullscale / 4096) * raw | 
|  | */ | 
|  | if (st->vrange_high) | 
|  | dummy *= 26350; | 
|  | else | 
|  | dummy *= 6650; | 
|  |  | 
|  | *val = DIV_ROUND_CLOSEST(dummy, 4096); | 
|  | return 0; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int adm1177_write(struct device *dev, enum hwmon_sensor_types type, | 
|  | u32 attr, int channel, long val) | 
|  | { | 
|  | struct adm1177_state *st = dev_get_drvdata(dev); | 
|  |  | 
|  | switch (type) { | 
|  | case hwmon_curr: | 
|  | switch (attr) { | 
|  | case hwmon_curr_max_alarm: | 
|  | adm1177_write_alert_thr(st, val); | 
|  | return 0; | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | default: | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | static umode_t adm1177_is_visible(const void *data, | 
|  | enum hwmon_sensor_types type, | 
|  | u32 attr, int channel) | 
|  | { | 
|  | const struct adm1177_state *st = data; | 
|  |  | 
|  | switch (type) { | 
|  | case hwmon_in: | 
|  | switch (attr) { | 
|  | case hwmon_in_input: | 
|  | return 0444; | 
|  | } | 
|  | break; | 
|  | case hwmon_curr: | 
|  | switch (attr) { | 
|  | case hwmon_curr_input: | 
|  | if (st->r_sense_uohm) | 
|  | return 0444; | 
|  | return 0; | 
|  | case hwmon_curr_max_alarm: | 
|  | if (st->r_sense_uohm) | 
|  | return 0644; | 
|  | return 0; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct hwmon_channel_info *adm1177_info[] = { | 
|  | HWMON_CHANNEL_INFO(curr, | 
|  | HWMON_C_INPUT | HWMON_C_MAX_ALARM), | 
|  | HWMON_CHANNEL_INFO(in, | 
|  | HWMON_I_INPUT), | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct hwmon_ops adm1177_hwmon_ops = { | 
|  | .is_visible = adm1177_is_visible, | 
|  | .read = adm1177_read, | 
|  | .write = adm1177_write, | 
|  | }; | 
|  |  | 
|  | static const struct hwmon_chip_info adm1177_chip_info = { | 
|  | .ops = &adm1177_hwmon_ops, | 
|  | .info = adm1177_info, | 
|  | }; | 
|  |  | 
|  | static void adm1177_remove(void *data) | 
|  | { | 
|  | struct adm1177_state *st = data; | 
|  |  | 
|  | regulator_disable(st->reg); | 
|  | } | 
|  |  | 
|  | static int adm1177_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct device *hwmon_dev; | 
|  | struct adm1177_state *st; | 
|  | u32 alert_threshold_ua; | 
|  | int ret; | 
|  |  | 
|  | st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL); | 
|  | if (!st) | 
|  | return -ENOMEM; | 
|  |  | 
|  | st->client = client; | 
|  |  | 
|  | st->reg = devm_regulator_get_optional(&client->dev, "vref"); | 
|  | if (IS_ERR(st->reg)) { | 
|  | if (PTR_ERR(st->reg) == -EPROBE_DEFER) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | st->reg = NULL; | 
|  | } else { | 
|  | ret = regulator_enable(st->reg); | 
|  | if (ret) | 
|  | return ret; | 
|  | ret = devm_add_action_or_reset(&client->dev, adm1177_remove, | 
|  | st); | 
|  | if (ret) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (device_property_read_u32(dev, "shunt-resistor-micro-ohms", | 
|  | &st->r_sense_uohm)) | 
|  | st->r_sense_uohm = 0; | 
|  | if (device_property_read_u32(dev, "adi,shutdown-threshold-microamp", | 
|  | &alert_threshold_ua)) { | 
|  | if (st->r_sense_uohm) | 
|  | /* | 
|  | * set maximum default value from datasheet based on | 
|  | * shunt-resistor | 
|  | */ | 
|  | alert_threshold_ua = div_u64(105840000000, | 
|  | st->r_sense_uohm); | 
|  | else | 
|  | alert_threshold_ua = 0; | 
|  | } | 
|  | st->vrange_high = device_property_read_bool(dev, | 
|  | "adi,vrange-high-enable"); | 
|  | if (alert_threshold_ua && st->r_sense_uohm) | 
|  | adm1177_write_alert_thr(st, alert_threshold_ua); | 
|  |  | 
|  | ret = adm1177_write_cmd(st, ADM1177_CMD_V_CONT | | 
|  | ADM1177_CMD_I_CONT | | 
|  | (st->vrange_high ? 0 : ADM1177_CMD_VRANGE)); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | hwmon_dev = | 
|  | devm_hwmon_device_register_with_info(dev, client->name, st, | 
|  | &adm1177_chip_info, NULL); | 
|  | return PTR_ERR_OR_ZERO(hwmon_dev); | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id adm1177_id[] = { | 
|  | {"adm1177", 0}, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, adm1177_id); | 
|  |  | 
|  | static const struct of_device_id adm1177_dt_ids[] = { | 
|  | { .compatible = "adi,adm1177" }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, adm1177_dt_ids); | 
|  |  | 
|  | static struct i2c_driver adm1177_driver = { | 
|  | .class = I2C_CLASS_HWMON, | 
|  | .driver = { | 
|  | .name = "adm1177", | 
|  | .of_match_table = adm1177_dt_ids, | 
|  | }, | 
|  | .probe = adm1177_probe, | 
|  | .id_table = adm1177_id, | 
|  | }; | 
|  | module_i2c_driver(adm1177_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>"); | 
|  | MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); | 
|  | MODULE_DESCRIPTION("Analog Devices ADM1177 ADC driver"); | 
|  | MODULE_LICENSE("GPL v2"); |