| // SPDX-License-Identifier: GPL-2.0-or-later | 
 | /* | 
 |  * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3 | 
 |  * | 
 |  * Copyright (C) 2012 Telit, | 
 |  *               2012 Fabio Porcedda <fabio.porcedda@gmail.com> | 
 |  */ | 
 |  | 
 | #include "at91sam9260.dtsi" | 
 |  | 
 | / { | 
 | 	clocks { | 
 | 		main_xtal { | 
 | 			clock-frequency = <6000000>; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	ahb { | 
 | 		apb { | 
 | 			tcb0: timer@fffa0000 { | 
 | 				timer@0 { | 
 | 					compatible = "atmel,tcb-timer"; | 
 | 					reg = <0>, <1>; | 
 | 				}; | 
 |  | 
 | 				timer@2 { | 
 | 					compatible = "atmel,tcb-timer"; | 
 | 					reg = <2>; | 
 | 				}; | 
 | 			}; | 
 |  | 
 | 			dbgu: serial@fffff200 { | 
 | 				status = "okay"; | 
 | 			}; | 
 | 		}; | 
 |  | 
 | 		ebi: ebi@10000000 { | 
 | 			status = "okay"; | 
 |  | 
 | 			nand_controller: nand-controller { | 
 | 				status = "okay"; | 
 | 				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>; | 
 | 				pinctrl-names = "default"; | 
 |  | 
 | 				nand@3 { | 
 | 					reg = <0x3 0x0 0x800000>; | 
 | 					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; | 
 | 					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>; | 
 | 					nand-bus-width = <8>; | 
 | 					nand-ecc-mode = "soft"; | 
 | 					nand-on-flash-bbt; | 
 | 					label = "atmel_nand"; | 
 |  | 
 | 					partitions { | 
 | 						compatible = "fixed-partitions"; | 
 | 						#address-cells = <1>; | 
 | 						#size-cells = <1>; | 
 |  | 
 | 						boot@0 { | 
 | 							label = "boot"; | 
 | 							reg = <0x0 0x7c0000>; | 
 | 						}; | 
 |  | 
 | 						root@7c0000 { | 
 | 							label = "root"; | 
 | 							reg = <0x7c0000 0x7840000>; | 
 | 						}; | 
 | 					}; | 
 | 				}; | 
 | 			}; | 
 | 		}; | 
 | 	}; | 
 |  | 
 | 	chosen { | 
 | 		bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs"; | 
 | 	}; | 
 | }; |