blob: d5626c572d24ecc095eace76ce733b703cddf2b9 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
//
// MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de>
// Copyright 2008 Juergen Beisert, kernel@pengutronix.de
//
// Based on code from Freescale Semiconductor,
// Authors: Daniel Mack, Juergen Beisert.
// Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved.
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/syscore_ops.h>
#include <linux/gpio/driver.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/bug.h>
#define IMX_SCU_WAKEUP_OFF 0
#define IMX_SCU_WAKEUP_LOW_LVL 4
#define IMX_SCU_WAKEUP_FALL_EDGE 5
#define IMX_SCU_WAKEUP_RISE_EDGE 6
#define IMX_SCU_WAKEUP_HIGH_LVL 7
/* device type dependent stuff */
struct mxc_gpio_hwdata {
unsigned dr_reg;
unsigned gdir_reg;
unsigned psr_reg;
unsigned icr1_reg;
unsigned icr2_reg;
unsigned imr_reg;
unsigned isr_reg;
int edge_sel_reg;
unsigned low_level;
unsigned high_level;
unsigned rise_edge;
unsigned fall_edge;
};
struct mxc_gpio_reg_saved {
u32 icr1;
u32 icr2;
u32 imr;
u32 gdir;
u32 edge_sel;
u32 dr;
};
struct mxc_gpio_port {
struct list_head node;
void __iomem *base;
struct clk *clk;
int irq;
int irq_high;
struct irq_domain *domain;
struct gpio_chip gc;
struct device *dev;
u32 both_edges;
struct mxc_gpio_reg_saved gpio_saved_reg;
bool power_off;
u32 wakeup_pads;
bool is_pad_wakeup;
u32 pad_type[32];
const struct mxc_gpio_hwdata *hwdata;
};
static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = {
.dr_reg = 0x1c,
.gdir_reg = 0x00,
.psr_reg = 0x24,
.icr1_reg = 0x28,
.icr2_reg = 0x2c,
.imr_reg = 0x30,
.isr_reg = 0x34,
.edge_sel_reg = -EINVAL,
.low_level = 0x03,
.high_level = 0x02,
.rise_edge = 0x00,
.fall_edge = 0x01,
};
static struct mxc_gpio_hwdata imx31_gpio_hwdata = {
.dr_reg = 0x00,
.gdir_reg = 0x04,
.psr_reg = 0x08,
.icr1_reg = 0x0c,
.icr2_reg = 0x10,
.imr_reg = 0x14,
.isr_reg = 0x18,
.edge_sel_reg = -EINVAL,
.low_level = 0x00,
.high_level = 0x01,
.rise_edge = 0x02,
.fall_edge = 0x03,
};
static struct mxc_gpio_hwdata imx35_gpio_hwdata = {
.dr_reg = 0x00,
.gdir_reg = 0x04,
.psr_reg = 0x08,
.icr1_reg = 0x0c,
.icr2_reg = 0x10,
.imr_reg = 0x14,
.isr_reg = 0x18,
.edge_sel_reg = 0x1c,
.low_level = 0x00,
.high_level = 0x01,
.rise_edge = 0x02,
.fall_edge = 0x03,
};
#define GPIO_DR (port->hwdata->dr_reg)
#define GPIO_GDIR (port->hwdata->gdir_reg)
#define GPIO_PSR (port->hwdata->psr_reg)
#define GPIO_ICR1 (port->hwdata->icr1_reg)
#define GPIO_ICR2 (port->hwdata->icr2_reg)
#define GPIO_IMR (port->hwdata->imr_reg)
#define GPIO_ISR (port->hwdata->isr_reg)
#define GPIO_EDGE_SEL (port->hwdata->edge_sel_reg)
#define GPIO_INT_LOW_LEV (port->hwdata->low_level)
#define GPIO_INT_HIGH_LEV (port->hwdata->high_level)
#define GPIO_INT_RISE_EDGE (port->hwdata->rise_edge)
#define GPIO_INT_FALL_EDGE (port->hwdata->fall_edge)
#define GPIO_INT_BOTH_EDGES 0x4
static const struct of_device_id mxc_gpio_dt_ids[] = {
{ .compatible = "fsl,imx1-gpio", .data = &imx1_imx21_gpio_hwdata },
{ .compatible = "fsl,imx21-gpio", .data = &imx1_imx21_gpio_hwdata },
{ .compatible = "fsl,imx31-gpio", .data = &imx31_gpio_hwdata },
{ .compatible = "fsl,imx35-gpio", .data = &imx35_gpio_hwdata },
{ .compatible = "fsl,imx7d-gpio", .data = &imx35_gpio_hwdata },
{ .compatible = "fsl,imx8dxl-gpio", .data = &imx35_gpio_hwdata },
{ .compatible = "fsl,imx8qm-gpio", .data = &imx35_gpio_hwdata },
{ .compatible = "fsl,imx8qxp-gpio", .data = &imx35_gpio_hwdata },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, mxc_gpio_dt_ids);
/*
* MX2 has one interrupt *for all* gpio ports. The list is used
* to save the references to all ports, so that mx2_gpio_irq_handler
* can walk through all interrupt status registers.
*/
static LIST_HEAD(mxc_gpio_ports);
/* Note: This driver assumes 32 GPIOs are handled in one register */
static int gpio_set_irq_type(struct irq_data *d, u32 type)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
u32 bit, val;
u32 gpio_idx = d->hwirq;
int edge;
void __iomem *reg = port->base;
port->both_edges &= ~(1 << gpio_idx);
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
break;
case IRQ_TYPE_EDGE_FALLING:
edge = GPIO_INT_FALL_EDGE;
break;
case IRQ_TYPE_EDGE_BOTH:
if (GPIO_EDGE_SEL >= 0) {
edge = GPIO_INT_BOTH_EDGES;
} else {
val = port->gc.get(&port->gc, gpio_idx);
if (val) {
edge = GPIO_INT_LOW_LEV;
pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx);
} else {
edge = GPIO_INT_HIGH_LEV;
pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx);
}
port->both_edges |= 1 << gpio_idx;
}
break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
edge = GPIO_INT_HIGH_LEV;
break;
default:
return -EINVAL;
}
if (GPIO_EDGE_SEL >= 0) {
val = readl(port->base + GPIO_EDGE_SEL);
if (edge == GPIO_INT_BOTH_EDGES)
writel(val | (1 << gpio_idx),
port->base + GPIO_EDGE_SEL);
else
writel(val & ~(1 << gpio_idx),
port->base + GPIO_EDGE_SEL);
}
if (edge != GPIO_INT_BOTH_EDGES) {
reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */
bit = gpio_idx & 0xf;
val = readl(reg) & ~(0x3 << (bit << 1));
writel(val | (edge << (bit << 1)), reg);
}
writel(1 << gpio_idx, port->base + GPIO_ISR);
port->pad_type[gpio_idx] = type;
return 0;
}
static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
{
void __iomem *reg = port->base;
u32 bit, val;
int edge;
reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
bit = gpio & 0xf;
val = readl(reg);
edge = (val >> (bit << 1)) & 3;
val &= ~(0x3 << (bit << 1));
if (edge == GPIO_INT_HIGH_LEV) {
edge = GPIO_INT_LOW_LEV;
pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
} else if (edge == GPIO_INT_LOW_LEV) {
edge = GPIO_INT_HIGH_LEV;
pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
} else {
pr_err("mxc: invalid configuration for GPIO %d: %x\n",
gpio, edge);
return;
}
writel(val | (edge << (bit << 1)), reg);
}
/* handle 32 interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
while (irq_stat != 0) {
int irqoffset = fls(irq_stat) - 1;
if (port->both_edges & (1 << irqoffset))
mxc_flip_edge(port, irqoffset);
generic_handle_domain_irq(port->domain, irqoffset);
irq_stat &= ~(1 << irqoffset);
}
}
/* MX1 and MX3 has one interrupt *per* gpio port */
static void mx3_gpio_irq_handler(struct irq_desc *desc)
{
u32 irq_stat;
struct mxc_gpio_port *port = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
if (port->is_pad_wakeup)
return;
chained_irq_enter(chip, desc);
irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR);
mxc_gpio_irq_handler(port, irq_stat);
chained_irq_exit(chip, desc);
}
/* MX2 has one interrupt *for all* gpio ports */
static void mx2_gpio_irq_handler(struct irq_desc *desc)
{
u32 irq_msk, irq_stat;
struct mxc_gpio_port *port;
struct irq_chip *chip = irq_desc_get_chip(desc);
chained_irq_enter(chip, desc);
/* walk through all interrupt status registers */
list_for_each_entry(port, &mxc_gpio_ports, node) {
irq_msk = readl(port->base + GPIO_IMR);
if (!irq_msk)
continue;
irq_stat = readl(port->base + GPIO_ISR) & irq_msk;
if (irq_stat)
mxc_gpio_irq_handler(port, irq_stat);
}
chained_irq_exit(chip, desc);
}
/*
* Set interrupt number "irq" in the GPIO as a wake-up source.
* While system is running, all registered GPIO interrupts need to have
* wake-up enabled. When system is suspended, only selected GPIO interrupts
* need to have wake-up enabled.
* @param irq interrupt source number
* @param enable enable as wake-up if equal to non-zero
* @return This function returns 0 on success.
*/
static int gpio_set_wake_irq(struct irq_data *d, u32 enable)
{
struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
struct mxc_gpio_port *port = gc->private;
u32 gpio_idx = d->hwirq;
int ret;
if (enable) {
if (port->irq_high && (gpio_idx >= 16))
ret = enable_irq_wake(port->irq_high);
else
ret = enable_irq_wake(port->irq);
port->wakeup_pads |= (1 << gpio_idx);
} else {
if (port->irq_high && (gpio_idx >= 16))
ret = disable_irq_wake(port->irq_high);
else
ret = disable_irq_wake(port->irq);
port->wakeup_pads &= ~(1 << gpio_idx);
}
return ret;
}
static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base)
{
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
int rv;
gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base,
port->base, handle_level_irq);
if (!gc)
return -ENOMEM;
gc->private = port;
ct = gc->chip_types;
ct->chip.irq_ack = irq_gc_ack_set_bit;
ct->chip.irq_mask = irq_gc_mask_clr_bit;
ct->chip.irq_unmask = irq_gc_mask_set_bit;
ct->chip.irq_set_type = gpio_set_irq_type;
ct->chip.irq_set_wake = gpio_set_wake_irq;
ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND;
ct->regs.ack = GPIO_ISR;
ct->regs.mask = GPIO_IMR;
rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32),
IRQ_GC_INIT_NESTED_LOCK,
IRQ_NOREQUEST, 0);
return rv;
}
static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct mxc_gpio_port *port = gpiochip_get_data(gc);
return irq_find_mapping(port->domain, offset);
}
static int mxc_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct mxc_gpio_port *port;
int irq_count;
int irq_base;
int err;
port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
if (!port)
return -ENOMEM;
port->dev = &pdev->dev;
port->hwdata = device_get_match_data(&pdev->dev);
port->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(port->base))
return PTR_ERR(port->base);
irq_count = platform_irq_count(pdev);
if (irq_count < 0)
return irq_count;
if (irq_count > 1) {
port->irq_high = platform_get_irq(pdev, 1);
if (port->irq_high < 0)
port->irq_high = 0;
}
port->irq = platform_get_irq(pdev, 0);
if (port->irq < 0)
return port->irq;
/* the controller clock is optional */
port->clk = devm_clk_get_optional(&pdev->dev, NULL);
if (IS_ERR(port->clk))
return PTR_ERR(port->clk);
err = clk_prepare_enable(port->clk);
if (err) {
dev_err(&pdev->dev, "Unable to enable clock.\n");
return err;
}
if (of_device_is_compatible(np, "fsl,imx7d-gpio"))
port->power_off = true;
/* disable the interrupt and clear the status */
writel(0, port->base + GPIO_IMR);
writel(~0, port->base + GPIO_ISR);
if (of_device_is_compatible(np, "fsl,imx21-gpio")) {
/*
* Setup one handler for all GPIO interrupts. Actually setting
* the handler is needed only once, but doing it for every port
* is more robust and easier.
*/
irq_set_chained_handler(port->irq, mx2_gpio_irq_handler);
} else {
/* setup one handler for each entry */
irq_set_chained_handler_and_data(port->irq,
mx3_gpio_irq_handler, port);
if (port->irq_high > 0)
/* setup handler for GPIO 16 to 31 */
irq_set_chained_handler_and_data(port->irq_high,
mx3_gpio_irq_handler,
port);
}
err = bgpio_init(&port->gc, &pdev->dev, 4,
port->base + GPIO_PSR,
port->base + GPIO_DR, NULL,
port->base + GPIO_GDIR, NULL,
BGPIOF_READ_OUTPUT_REG_SET);
if (err)
goto out_bgio;
port->gc.request = gpiochip_generic_request;
port->gc.free = gpiochip_generic_free;
port->gc.to_irq = mxc_gpio_to_irq;
port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 :
pdev->id * 32;
err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port);
if (err)
goto out_bgio;
irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id());
if (irq_base < 0) {
err = irq_base;
goto out_bgio;
}
port->domain = irq_domain_add_legacy(np, 32, irq_base, 0,
&irq_domain_simple_ops, NULL);
if (!port->domain) {
err = -ENODEV;
goto out_bgio;
}
/* gpio-mxc can be a generic irq chip */
err = mxc_gpio_init_gc(port, irq_base);
if (err < 0)
goto out_irqdomain_remove;
list_add_tail(&port->node, &mxc_gpio_ports);
platform_set_drvdata(pdev, port);
return 0;
out_irqdomain_remove:
irq_domain_remove(port->domain);
out_bgio:
clk_disable_unprepare(port->clk);
dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err);
return err;
}
static void mxc_gpio_save_regs(struct mxc_gpio_port *port)
{
if (!port->power_off)
return;
port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1);
port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2);
port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR);
port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR);
port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL);
port->gpio_saved_reg.dr = readl(port->base + GPIO_DR);
}
static void mxc_gpio_restore_regs(struct mxc_gpio_port *port)
{
if (!port->power_off)
return;
writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1);
writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2);
writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR);
writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR);
writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL);
writel(port->gpio_saved_reg.dr, port->base + GPIO_DR);
}
static bool mxc_gpio_generic_config(struct mxc_gpio_port *port,
unsigned int offset, unsigned long conf)
{
struct device_node *np = port->dev->of_node;
if (of_device_is_compatible(np, "fsl,imx8dxl-gpio") ||
of_device_is_compatible(np, "fsl,imx8qxp-gpio") ||
of_device_is_compatible(np, "fsl,imx8qm-gpio"))
return (gpiochip_generic_config(&port->gc, offset, conf) == 0);
return false;
}
static bool mxc_gpio_set_pad_wakeup(struct mxc_gpio_port *port, bool enable)
{
unsigned long config;
bool ret = false;
int i, type;
static const u32 pad_type_map[] = {
IMX_SCU_WAKEUP_OFF, /* 0 */
IMX_SCU_WAKEUP_RISE_EDGE, /* IRQ_TYPE_EDGE_RISING */
IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_FALLING */
IMX_SCU_WAKEUP_FALL_EDGE, /* IRQ_TYPE_EDGE_BOTH */
IMX_SCU_WAKEUP_HIGH_LVL, /* IRQ_TYPE_LEVEL_HIGH */
IMX_SCU_WAKEUP_OFF, /* 5 */
IMX_SCU_WAKEUP_OFF, /* 6 */
IMX_SCU_WAKEUP_OFF, /* 7 */
IMX_SCU_WAKEUP_LOW_LVL, /* IRQ_TYPE_LEVEL_LOW */
};
for (i = 0; i < 32; i++) {
if ((port->wakeup_pads & (1 << i))) {
type = port->pad_type[i];
if (enable)
config = pad_type_map[type];
else
config = IMX_SCU_WAKEUP_OFF;
ret |= mxc_gpio_generic_config(port, i, config);
}
}
return ret;
}
static int __maybe_unused mxc_gpio_noirq_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct mxc_gpio_port *port = platform_get_drvdata(pdev);
if (port->wakeup_pads > 0)
port->is_pad_wakeup = mxc_gpio_set_pad_wakeup(port, true);
return 0;
}
static int __maybe_unused mxc_gpio_noirq_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct mxc_gpio_port *port = platform_get_drvdata(pdev);
if (port->wakeup_pads > 0)
mxc_gpio_set_pad_wakeup(port, false);
port->is_pad_wakeup = false;
return 0;
}
static const struct dev_pm_ops mxc_gpio_dev_pm_ops = {
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mxc_gpio_noirq_suspend, mxc_gpio_noirq_resume)
};
static int mxc_gpio_syscore_suspend(void)
{
struct mxc_gpio_port *port;
/* walk through all ports */
list_for_each_entry(port, &mxc_gpio_ports, node) {
mxc_gpio_save_regs(port);
clk_disable_unprepare(port->clk);
}
return 0;
}
static void mxc_gpio_syscore_resume(void)
{
struct mxc_gpio_port *port;
int ret;
/* walk through all ports */
list_for_each_entry(port, &mxc_gpio_ports, node) {
ret = clk_prepare_enable(port->clk);
if (ret) {
pr_err("mxc: failed to enable gpio clock %d\n", ret);
return;
}
mxc_gpio_restore_regs(port);
}
}
static struct syscore_ops mxc_gpio_syscore_ops = {
.suspend = mxc_gpio_syscore_suspend,
.resume = mxc_gpio_syscore_resume,
};
static struct platform_driver mxc_gpio_driver = {
.driver = {
.name = "gpio-mxc",
.of_match_table = mxc_gpio_dt_ids,
.suppress_bind_attrs = true,
.pm = &mxc_gpio_dev_pm_ops,
},
.probe = mxc_gpio_probe,
};
static int __init gpio_mxc_init(void)
{
register_syscore_ops(&mxc_gpio_syscore_ops);
return platform_driver_register(&mxc_gpio_driver);
}
subsys_initcall(gpio_mxc_init);
MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>");
MODULE_DESCRIPTION("i.MX GPIO Driver");
MODULE_LICENSE("GPL");