| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC | |
| * | |
| * Authors: | |
| * Serge Semin <Sergey.Semin@baikalelectronics.ru> | |
| * | |
| * Baikal-T1 APB-bus driver | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/types.h> | |
| #include <linux/device.h> | |
| #include <linux/atomic.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/nmi.h> | |
| #include <linux/of.h> | |
| #include <linux/regmap.h> | |
| #include <linux/clk.h> | |
| #include <linux/reset.h> | |
| #include <linux/time64.h> | |
| #include <linux/clk.h> | |
| #include <linux/sysfs.h> | |
| #define APB_EHB_ISR 0x00 | |
| #define APB_EHB_ISR_PENDING BIT(0) | |
| #define APB_EHB_ISR_MASK BIT(1) | |
| #define APB_EHB_ADDR 0x04 | |
| #define APB_EHB_TIMEOUT 0x08 | |
| #define APB_EHB_TIMEOUT_MIN 0x000003FFU | |
| #define APB_EHB_TIMEOUT_MAX 0xFFFFFFFFU | |
| /* | |
| * struct bt1_apb - Baikal-T1 APB EHB private data | |
| * @dev: Pointer to the device structure. | |
| * @regs: APB EHB registers map. | |
| * @res: No-device error injection memory region. | |
| * @irq: Errors IRQ number. | |
| * @rate: APB-bus reference clock rate. | |
| * @pclk: APB-reference clock. | |
| * @prst: APB domain reset line. | |
| * @count: Number of errors detected. | |
| */ | |
| struct bt1_apb { | |
| struct device *dev; | |
| struct regmap *regs; | |
| void __iomem *res; | |
| int irq; | |
| unsigned long rate; | |
| struct clk *pclk; | |
| struct reset_control *prst; | |
| atomic_t count; | |
| }; | |
| static const struct regmap_config bt1_apb_regmap_cfg = { | |
| .reg_bits = 32, | |
| .val_bits = 32, | |
| .reg_stride = 4, | |
| .max_register = APB_EHB_TIMEOUT, | |
| .fast_io = true | |
| }; | |
| static inline unsigned long bt1_apb_n_to_timeout_us(struct bt1_apb *apb, u32 n) | |
| { | |
| u64 timeout = (u64)n * USEC_PER_SEC; | |
| do_div(timeout, apb->rate); | |
| return timeout; | |
| } | |
| static inline unsigned long bt1_apb_timeout_to_n_us(struct bt1_apb *apb, | |
| unsigned long timeout) | |
| { | |
| u64 n = (u64)timeout * apb->rate; | |
| do_div(n, USEC_PER_SEC); | |
| return n; | |
| } | |
| static irqreturn_t bt1_apb_isr(int irq, void *data) | |
| { | |
| struct bt1_apb *apb = data; | |
| u32 addr = 0; | |
| regmap_read(apb->regs, APB_EHB_ADDR, &addr); | |
| dev_crit_ratelimited(apb->dev, | |
| "APB-bus fault %d: Slave access timeout at 0x%08x\n", | |
| atomic_inc_return(&apb->count), | |
| addr); | |
| /* | |
| * Print backtrace on each CPU. This might be pointless if the fault | |
| * has happened on the same CPU as the IRQ handler is executed or | |
| * the other core proceeded further execution despite the error. | |
| * But if it's not, by looking at the trace we would get straight to | |
| * the cause of the problem. | |
| */ | |
| trigger_all_cpu_backtrace(); | |
| regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, 0); | |
| return IRQ_HANDLED; | |
| } | |
| static void bt1_apb_clear_data(void *data) | |
| { | |
| struct bt1_apb *apb = data; | |
| struct platform_device *pdev = to_platform_device(apb->dev); | |
| platform_set_drvdata(pdev, NULL); | |
| } | |
| static struct bt1_apb *bt1_apb_create_data(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct bt1_apb *apb; | |
| int ret; | |
| apb = devm_kzalloc(dev, sizeof(*apb), GFP_KERNEL); | |
| if (!apb) | |
| return ERR_PTR(-ENOMEM); | |
| ret = devm_add_action(dev, bt1_apb_clear_data, apb); | |
| if (ret) { | |
| dev_err(dev, "Can't add APB EHB data clear action\n"); | |
| return ERR_PTR(ret); | |
| } | |
| apb->dev = dev; | |
| atomic_set(&apb->count, 0); | |
| platform_set_drvdata(pdev, apb); | |
| return apb; | |
| } | |
| static int bt1_apb_request_regs(struct bt1_apb *apb) | |
| { | |
| struct platform_device *pdev = to_platform_device(apb->dev); | |
| void __iomem *regs; | |
| regs = devm_platform_ioremap_resource_byname(pdev, "ehb"); | |
| if (IS_ERR(regs)) { | |
| dev_err(apb->dev, "Couldn't map APB EHB registers\n"); | |
| return PTR_ERR(regs); | |
| } | |
| apb->regs = devm_regmap_init_mmio(apb->dev, regs, &bt1_apb_regmap_cfg); | |
| if (IS_ERR(apb->regs)) { | |
| dev_err(apb->dev, "Couldn't create APB EHB regmap\n"); | |
| return PTR_ERR(apb->regs); | |
| } | |
| apb->res = devm_platform_ioremap_resource_byname(pdev, "nodev"); | |
| if (IS_ERR(apb->res)) | |
| dev_err(apb->dev, "Couldn't map reserved region\n"); | |
| return PTR_ERR_OR_ZERO(apb->res); | |
| } | |
| static int bt1_apb_request_rst(struct bt1_apb *apb) | |
| { | |
| int ret; | |
| apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst"); | |
| if (IS_ERR(apb->prst)) | |
| return dev_err_probe(apb->dev, PTR_ERR(apb->prst), | |
| "Couldn't get reset control line\n"); | |
| ret = reset_control_deassert(apb->prst); | |
| if (ret) | |
| dev_err(apb->dev, "Failed to deassert the reset line\n"); | |
| return ret; | |
| } | |
| static void bt1_apb_disable_clk(void *data) | |
| { | |
| struct bt1_apb *apb = data; | |
| clk_disable_unprepare(apb->pclk); | |
| } | |
| static int bt1_apb_request_clk(struct bt1_apb *apb) | |
| { | |
| int ret; | |
| apb->pclk = devm_clk_get(apb->dev, "pclk"); | |
| if (IS_ERR(apb->pclk)) | |
| return dev_err_probe(apb->dev, PTR_ERR(apb->pclk), | |
| "Couldn't get APB clock descriptor\n"); | |
| ret = clk_prepare_enable(apb->pclk); | |
| if (ret) { | |
| dev_err(apb->dev, "Couldn't enable the APB clock\n"); | |
| return ret; | |
| } | |
| ret = devm_add_action_or_reset(apb->dev, bt1_apb_disable_clk, apb); | |
| if (ret) { | |
| dev_err(apb->dev, "Can't add APB EHB clocks disable action\n"); | |
| return ret; | |
| } | |
| apb->rate = clk_get_rate(apb->pclk); | |
| if (!apb->rate) { | |
| dev_err(apb->dev, "Invalid clock rate\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static void bt1_apb_clear_irq(void *data) | |
| { | |
| struct bt1_apb *apb = data; | |
| regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_MASK, 0); | |
| } | |
| static int bt1_apb_request_irq(struct bt1_apb *apb) | |
| { | |
| struct platform_device *pdev = to_platform_device(apb->dev); | |
| int ret; | |
| apb->irq = platform_get_irq(pdev, 0); | |
| if (apb->irq < 0) | |
| return apb->irq; | |
| ret = devm_request_irq(apb->dev, apb->irq, bt1_apb_isr, IRQF_SHARED, | |
| "bt1-apb", apb); | |
| if (ret) { | |
| dev_err(apb->dev, "Couldn't request APB EHB IRQ\n"); | |
| return ret; | |
| } | |
| ret = devm_add_action(apb->dev, bt1_apb_clear_irq, apb); | |
| if (ret) { | |
| dev_err(apb->dev, "Can't add APB EHB IRQs clear action\n"); | |
| return ret; | |
| } | |
| /* Unmask IRQ and clear it' pending flag. */ | |
| regmap_update_bits(apb->regs, APB_EHB_ISR, | |
| APB_EHB_ISR_PENDING | APB_EHB_ISR_MASK, | |
| APB_EHB_ISR_MASK); | |
| return 0; | |
| } | |
| static ssize_t count_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct bt1_apb *apb = dev_get_drvdata(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&apb->count)); | |
| } | |
| static DEVICE_ATTR_RO(count); | |
| static ssize_t timeout_show(struct device *dev, struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct bt1_apb *apb = dev_get_drvdata(dev); | |
| unsigned long timeout; | |
| int ret; | |
| u32 n; | |
| ret = regmap_read(apb->regs, APB_EHB_TIMEOUT, &n); | |
| if (ret) | |
| return ret; | |
| timeout = bt1_apb_n_to_timeout_us(apb, n); | |
| return scnprintf(buf, PAGE_SIZE, "%lu\n", timeout); | |
| } | |
| static ssize_t timeout_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct bt1_apb *apb = dev_get_drvdata(dev); | |
| unsigned long timeout; | |
| int ret; | |
| u32 n; | |
| if (kstrtoul(buf, 0, &timeout) < 0) | |
| return -EINVAL; | |
| n = bt1_apb_timeout_to_n_us(apb, timeout); | |
| n = clamp(n, APB_EHB_TIMEOUT_MIN, APB_EHB_TIMEOUT_MAX); | |
| ret = regmap_write(apb->regs, APB_EHB_TIMEOUT, n); | |
| return ret ?: count; | |
| } | |
| static DEVICE_ATTR_RW(timeout); | |
| static ssize_t inject_error_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| return scnprintf(buf, PAGE_SIZE, "Error injection: nodev irq\n"); | |
| } | |
| static ssize_t inject_error_store(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *data, size_t count) | |
| { | |
| struct bt1_apb *apb = dev_get_drvdata(dev); | |
| /* | |
| * Either dummy read from the unmapped address in the APB IO area | |
| * or manually set the IRQ status. | |
| */ | |
| if (sysfs_streq(data, "nodev")) | |
| readl(apb->res); | |
| else if (sysfs_streq(data, "irq")) | |
| regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, | |
| APB_EHB_ISR_PENDING); | |
| else | |
| return -EINVAL; | |
| return count; | |
| } | |
| static DEVICE_ATTR_RW(inject_error); | |
| static struct attribute *bt1_apb_sysfs_attrs[] = { | |
| &dev_attr_count.attr, | |
| &dev_attr_timeout.attr, | |
| &dev_attr_inject_error.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(bt1_apb_sysfs); | |
| static void bt1_apb_remove_sysfs(void *data) | |
| { | |
| struct bt1_apb *apb = data; | |
| device_remove_groups(apb->dev, bt1_apb_sysfs_groups); | |
| } | |
| static int bt1_apb_init_sysfs(struct bt1_apb *apb) | |
| { | |
| int ret; | |
| ret = device_add_groups(apb->dev, bt1_apb_sysfs_groups); | |
| if (ret) { | |
| dev_err(apb->dev, "Failed to create EHB APB sysfs nodes\n"); | |
| return ret; | |
| } | |
| ret = devm_add_action_or_reset(apb->dev, bt1_apb_remove_sysfs, apb); | |
| if (ret) | |
| dev_err(apb->dev, "Can't add APB EHB sysfs remove action\n"); | |
| return ret; | |
| } | |
| static int bt1_apb_probe(struct platform_device *pdev) | |
| { | |
| struct bt1_apb *apb; | |
| int ret; | |
| apb = bt1_apb_create_data(pdev); | |
| if (IS_ERR(apb)) | |
| return PTR_ERR(apb); | |
| ret = bt1_apb_request_regs(apb); | |
| if (ret) | |
| return ret; | |
| ret = bt1_apb_request_rst(apb); | |
| if (ret) | |
| return ret; | |
| ret = bt1_apb_request_clk(apb); | |
| if (ret) | |
| return ret; | |
| ret = bt1_apb_request_irq(apb); | |
| if (ret) | |
| return ret; | |
| ret = bt1_apb_init_sysfs(apb); | |
| if (ret) | |
| return ret; | |
| return 0; | |
| } | |
| static const struct of_device_id bt1_apb_of_match[] = { | |
| { .compatible = "baikal,bt1-apb" }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, bt1_apb_of_match); | |
| static struct platform_driver bt1_apb_driver = { | |
| .probe = bt1_apb_probe, | |
| .driver = { | |
| .name = "bt1-apb", | |
| .of_match_table = bt1_apb_of_match | |
| } | |
| }; | |
| module_platform_driver(bt1_apb_driver); | |
| MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>"); | |
| MODULE_DESCRIPTION("Baikal-T1 APB-bus driver"); |