| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * CS2000 -- CIRRUS LOGIC Fractional-N Clock Synthesizer & Clock Multiplier | |
| * | |
| * Copyright (C) 2015 Renesas Electronics Corporation | |
| * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> | |
| */ | |
| #include <linux/clk-provider.h> | |
| #include <linux/delay.h> | |
| #include <linux/clk.h> | |
| #include <linux/i2c.h> | |
| #include <linux/of.h> | |
| #include <linux/module.h> | |
| #include <linux/regmap.h> | |
| #define CH_MAX 4 | |
| #define RATIO_REG_SIZE 4 | |
| #define DEVICE_ID 0x1 | |
| #define DEVICE_CTRL 0x2 | |
| #define DEVICE_CFG1 0x3 | |
| #define DEVICE_CFG2 0x4 | |
| #define GLOBAL_CFG 0x5 | |
| #define Ratio_Add(x, nth) (6 + (x * 4) + (nth)) | |
| #define Ratio_Val(x, nth) ((x >> (24 - (8 * nth))) & 0xFF) | |
| #define Val_Ratio(x, nth) ((x & 0xFF) << (24 - (8 * nth))) | |
| #define FUNC_CFG1 0x16 | |
| #define FUNC_CFG2 0x17 | |
| /* DEVICE_ID */ | |
| #define REVISION_MASK (0x7) | |
| #define REVISION_B2_B3 (0x4) | |
| #define REVISION_C1 (0x6) | |
| /* DEVICE_CTRL */ | |
| #define PLL_UNLOCK (1 << 7) | |
| #define AUXOUTDIS (1 << 1) | |
| #define CLKOUTDIS (1 << 0) | |
| /* DEVICE_CFG1 */ | |
| #define RSEL(x) (((x) & 0x3) << 3) | |
| #define RSEL_MASK RSEL(0x3) | |
| #define AUXOUTSRC(x) (((x) & 0x3) << 1) | |
| #define AUXOUTSRC_MASK AUXOUTSRC(0x3) | |
| #define ENDEV1 (0x1) | |
| /* DEVICE_CFG2 */ | |
| #define AUTORMOD (1 << 3) | |
| #define LOCKCLK(x) (((x) & 0x3) << 1) | |
| #define LOCKCLK_MASK LOCKCLK(0x3) | |
| #define FRACNSRC_MASK (1 << 0) | |
| #define FRACNSRC_STATIC (0 << 0) | |
| #define FRACNSRC_DYNAMIC (1 << 0) | |
| /* GLOBAL_CFG */ | |
| #define FREEZE (1 << 7) | |
| #define ENDEV2 (0x1) | |
| /* FUNC_CFG1 */ | |
| #define CLKSKIPEN (1 << 7) | |
| #define REFCLKDIV(x) (((x) & 0x3) << 3) | |
| #define REFCLKDIV_MASK REFCLKDIV(0x3) | |
| /* FUNC_CFG2 */ | |
| #define LFRATIO_MASK (1 << 3) | |
| #define LFRATIO_20_12 (0 << 3) | |
| #define LFRATIO_12_20 (1 << 3) | |
| #define CH_SIZE_ERR(ch) ((ch < 0) || (ch >= CH_MAX)) | |
| #define hw_to_priv(_hw) container_of(_hw, struct cs2000_priv, hw) | |
| #define priv_to_client(priv) (priv->client) | |
| #define priv_to_dev(priv) (&(priv_to_client(priv)->dev)) | |
| #define CLK_IN 0 | |
| #define REF_CLK 1 | |
| #define CLK_MAX 2 | |
| static bool cs2000_readable_reg(struct device *dev, unsigned int reg) | |
| { | |
| return reg > 0; | |
| } | |
| static bool cs2000_writeable_reg(struct device *dev, unsigned int reg) | |
| { | |
| return reg != DEVICE_ID; | |
| } | |
| static bool cs2000_volatile_reg(struct device *dev, unsigned int reg) | |
| { | |
| return reg == DEVICE_CTRL; | |
| } | |
| static const struct regmap_config cs2000_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| .max_register = FUNC_CFG2, | |
| .readable_reg = cs2000_readable_reg, | |
| .writeable_reg = cs2000_writeable_reg, | |
| .volatile_reg = cs2000_volatile_reg, | |
| }; | |
| struct cs2000_priv { | |
| struct clk_hw hw; | |
| struct i2c_client *client; | |
| struct clk *clk_in; | |
| struct clk *ref_clk; | |
| struct regmap *regmap; | |
| bool dynamic_mode; | |
| bool lf_ratio; | |
| bool clk_skip; | |
| /* suspend/resume */ | |
| unsigned long saved_rate; | |
| unsigned long saved_parent_rate; | |
| }; | |
| static const struct of_device_id cs2000_of_match[] = { | |
| { .compatible = "cirrus,cs2000-cp", }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, cs2000_of_match); | |
| static const struct i2c_device_id cs2000_id[] = { | |
| { "cs2000-cp", }, | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, cs2000_id); | |
| static int cs2000_enable_dev_config(struct cs2000_priv *priv, bool enable) | |
| { | |
| int ret; | |
| ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, ENDEV1, | |
| enable ? ENDEV1 : 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, ENDEV2, | |
| enable ? ENDEV2 : 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = regmap_update_bits(priv->regmap, FUNC_CFG1, CLKSKIPEN, | |
| (enable && priv->clk_skip) ? CLKSKIPEN : 0); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| static int cs2000_ref_clk_bound_rate(struct cs2000_priv *priv, | |
| u32 rate_in) | |
| { | |
| u32 val; | |
| if (rate_in >= 32000000 && rate_in < 56000000) | |
| val = 0x0; | |
| else if (rate_in >= 16000000 && rate_in < 28000000) | |
| val = 0x1; | |
| else if (rate_in >= 8000000 && rate_in < 14000000) | |
| val = 0x2; | |
| else | |
| return -EINVAL; | |
| return regmap_update_bits(priv->regmap, FUNC_CFG1, | |
| REFCLKDIV_MASK, | |
| REFCLKDIV(val)); | |
| } | |
| static int cs2000_wait_pll_lock(struct cs2000_priv *priv) | |
| { | |
| struct device *dev = priv_to_dev(priv); | |
| unsigned int i, val; | |
| int ret; | |
| for (i = 0; i < 256; i++) { | |
| ret = regmap_read(priv->regmap, DEVICE_CTRL, &val); | |
| if (ret < 0) | |
| return ret; | |
| if (!(val & PLL_UNLOCK)) | |
| return 0; | |
| udelay(1); | |
| } | |
| dev_err(dev, "pll lock failed\n"); | |
| return -ETIMEDOUT; | |
| } | |
| static int cs2000_clk_out_enable(struct cs2000_priv *priv, bool enable) | |
| { | |
| /* enable both AUX_OUT, CLK_OUT */ | |
| return regmap_update_bits(priv->regmap, DEVICE_CTRL, | |
| (AUXOUTDIS | CLKOUTDIS), | |
| enable ? 0 : | |
| (AUXOUTDIS | CLKOUTDIS)); | |
| } | |
| static u32 cs2000_rate_to_ratio(u32 rate_in, u32 rate_out, bool lf_ratio) | |
| { | |
| u64 ratio; | |
| u32 multiplier = lf_ratio ? 12 : 20; | |
| /* | |
| * ratio = rate_out / rate_in * 2^multiplier | |
| * | |
| * To avoid over flow, rate_out is u64. | |
| * The result should be u32. | |
| */ | |
| ratio = (u64)rate_out << multiplier; | |
| do_div(ratio, rate_in); | |
| return ratio; | |
| } | |
| static unsigned long cs2000_ratio_to_rate(u32 ratio, u32 rate_in, bool lf_ratio) | |
| { | |
| u64 rate_out; | |
| u32 multiplier = lf_ratio ? 12 : 20; | |
| /* | |
| * ratio = rate_out / rate_in * 2^multiplier | |
| * | |
| * To avoid over flow, rate_out is u64. | |
| * The result should be u32 or unsigned long. | |
| */ | |
| rate_out = (u64)ratio * rate_in; | |
| return rate_out >> multiplier; | |
| } | |
| static int cs2000_ratio_set(struct cs2000_priv *priv, | |
| int ch, u32 rate_in, u32 rate_out) | |
| { | |
| u32 val; | |
| unsigned int i; | |
| int ret; | |
| if (CH_SIZE_ERR(ch)) | |
| return -EINVAL; | |
| val = cs2000_rate_to_ratio(rate_in, rate_out, priv->lf_ratio); | |
| for (i = 0; i < RATIO_REG_SIZE; i++) { | |
| ret = regmap_write(priv->regmap, | |
| Ratio_Add(ch, i), | |
| Ratio_Val(val, i)); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static u32 cs2000_ratio_get(struct cs2000_priv *priv, int ch) | |
| { | |
| unsigned int tmp, i; | |
| u32 val; | |
| int ret; | |
| val = 0; | |
| for (i = 0; i < RATIO_REG_SIZE; i++) { | |
| ret = regmap_read(priv->regmap, Ratio_Add(ch, i), &tmp); | |
| if (ret < 0) | |
| return 0; | |
| val |= Val_Ratio(tmp, i); | |
| } | |
| return val; | |
| } | |
| static int cs2000_ratio_select(struct cs2000_priv *priv, int ch) | |
| { | |
| int ret; | |
| u8 fracnsrc; | |
| if (CH_SIZE_ERR(ch)) | |
| return -EINVAL; | |
| ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, RSEL_MASK, RSEL(ch)); | |
| if (ret < 0) | |
| return ret; | |
| fracnsrc = priv->dynamic_mode ? FRACNSRC_DYNAMIC : FRACNSRC_STATIC; | |
| ret = regmap_update_bits(priv->regmap, DEVICE_CFG2, | |
| AUTORMOD | LOCKCLK_MASK | FRACNSRC_MASK, | |
| LOCKCLK(ch) | fracnsrc); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| static unsigned long cs2000_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct cs2000_priv *priv = hw_to_priv(hw); | |
| int ch = 0; /* it uses ch0 only at this point */ | |
| u32 ratio; | |
| ratio = cs2000_ratio_get(priv, ch); | |
| return cs2000_ratio_to_rate(ratio, parent_rate, priv->lf_ratio); | |
| } | |
| static long cs2000_round_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long *parent_rate) | |
| { | |
| struct cs2000_priv *priv = hw_to_priv(hw); | |
| u32 ratio; | |
| ratio = cs2000_rate_to_ratio(*parent_rate, rate, priv->lf_ratio); | |
| return cs2000_ratio_to_rate(ratio, *parent_rate, priv->lf_ratio); | |
| } | |
| static int cs2000_select_ratio_mode(struct cs2000_priv *priv, | |
| unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| /* | |
| * From the datasheet: | |
| * | |
| * | It is recommended that the 12.20 High-Resolution format be | |
| * | utilized whenever the desired ratio is less than 4096 since | |
| * | the output frequency accuracy of the PLL is directly proportional | |
| * | to the accuracy of the timing reference clock and the resolution | |
| * | of the R_UD. | |
| * | |
| * This mode is only available in dynamic mode. | |
| */ | |
| priv->lf_ratio = priv->dynamic_mode && ((rate / parent_rate) > 4096); | |
| return regmap_update_bits(priv->regmap, FUNC_CFG2, LFRATIO_MASK, | |
| priv->lf_ratio ? LFRATIO_20_12 : LFRATIO_12_20); | |
| } | |
| static int __cs2000_set_rate(struct cs2000_priv *priv, int ch, | |
| unsigned long rate, unsigned long parent_rate) | |
| { | |
| int ret; | |
| ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, FREEZE, FREEZE); | |
| if (ret < 0) | |
| return ret; | |
| ret = cs2000_select_ratio_mode(priv, rate, parent_rate); | |
| if (ret < 0) | |
| return ret; | |
| ret = cs2000_ratio_set(priv, ch, parent_rate, rate); | |
| if (ret < 0) | |
| return ret; | |
| ret = cs2000_ratio_select(priv, ch); | |
| if (ret < 0) | |
| return ret; | |
| ret = regmap_update_bits(priv->regmap, GLOBAL_CFG, FREEZE, 0); | |
| if (ret < 0) | |
| return ret; | |
| priv->saved_rate = rate; | |
| priv->saved_parent_rate = parent_rate; | |
| return 0; | |
| } | |
| static int cs2000_set_rate(struct clk_hw *hw, | |
| unsigned long rate, unsigned long parent_rate) | |
| { | |
| struct cs2000_priv *priv = hw_to_priv(hw); | |
| int ch = 0; /* it uses ch0 only at this point */ | |
| return __cs2000_set_rate(priv, ch, rate, parent_rate); | |
| } | |
| static int cs2000_set_saved_rate(struct cs2000_priv *priv) | |
| { | |
| int ch = 0; /* it uses ch0 only at this point */ | |
| return __cs2000_set_rate(priv, ch, | |
| priv->saved_rate, | |
| priv->saved_parent_rate); | |
| } | |
| static int cs2000_enable(struct clk_hw *hw) | |
| { | |
| struct cs2000_priv *priv = hw_to_priv(hw); | |
| int ret; | |
| ret = cs2000_enable_dev_config(priv, true); | |
| if (ret < 0) | |
| return ret; | |
| ret = cs2000_clk_out_enable(priv, true); | |
| if (ret < 0) | |
| return ret; | |
| ret = cs2000_wait_pll_lock(priv); | |
| if (ret < 0) | |
| return ret; | |
| return ret; | |
| } | |
| static void cs2000_disable(struct clk_hw *hw) | |
| { | |
| struct cs2000_priv *priv = hw_to_priv(hw); | |
| cs2000_enable_dev_config(priv, false); | |
| cs2000_clk_out_enable(priv, false); | |
| } | |
| static u8 cs2000_get_parent(struct clk_hw *hw) | |
| { | |
| struct cs2000_priv *priv = hw_to_priv(hw); | |
| /* | |
| * In dynamic mode, output rates are derived from CLK_IN. | |
| * In static mode, CLK_IN is ignored, so we return REF_CLK instead. | |
| */ | |
| return priv->dynamic_mode ? CLK_IN : REF_CLK; | |
| } | |
| static const struct clk_ops cs2000_ops = { | |
| .get_parent = cs2000_get_parent, | |
| .recalc_rate = cs2000_recalc_rate, | |
| .round_rate = cs2000_round_rate, | |
| .set_rate = cs2000_set_rate, | |
| .prepare = cs2000_enable, | |
| .unprepare = cs2000_disable, | |
| }; | |
| static int cs2000_clk_get(struct cs2000_priv *priv) | |
| { | |
| struct device *dev = priv_to_dev(priv); | |
| struct clk *clk_in, *ref_clk; | |
| clk_in = devm_clk_get(dev, "clk_in"); | |
| /* not yet provided */ | |
| if (IS_ERR(clk_in)) | |
| return -EPROBE_DEFER; | |
| ref_clk = devm_clk_get(dev, "ref_clk"); | |
| /* not yet provided */ | |
| if (IS_ERR(ref_clk)) | |
| return -EPROBE_DEFER; | |
| priv->clk_in = clk_in; | |
| priv->ref_clk = ref_clk; | |
| return 0; | |
| } | |
| static int cs2000_clk_register(struct cs2000_priv *priv) | |
| { | |
| struct device *dev = priv_to_dev(priv); | |
| struct device_node *np = dev->of_node; | |
| struct clk_init_data init; | |
| const char *name = np->name; | |
| static const char *parent_names[CLK_MAX]; | |
| u32 aux_out = 0; | |
| int ref_clk_rate; | |
| int ch = 0; /* it uses ch0 only at this point */ | |
| int ret; | |
| of_property_read_string(np, "clock-output-names", &name); | |
| priv->dynamic_mode = of_property_read_bool(np, "cirrus,dynamic-mode"); | |
| dev_info(dev, "operating in %s mode\n", | |
| priv->dynamic_mode ? "dynamic" : "static"); | |
| of_property_read_u32(np, "cirrus,aux-output-source", &aux_out); | |
| ret = regmap_update_bits(priv->regmap, DEVICE_CFG1, | |
| AUXOUTSRC_MASK, AUXOUTSRC(aux_out)); | |
| if (ret < 0) | |
| return ret; | |
| priv->clk_skip = of_property_read_bool(np, "cirrus,clock-skip"); | |
| ref_clk_rate = clk_get_rate(priv->ref_clk); | |
| ret = cs2000_ref_clk_bound_rate(priv, ref_clk_rate); | |
| if (ret < 0) | |
| return ret; | |
| if (priv->dynamic_mode) { | |
| /* Default to low-frequency mode to allow for large ratios */ | |
| priv->lf_ratio = true; | |
| } else { | |
| /* | |
| * set default rate as 1/1. | |
| * otherwise .set_rate which setup ratio | |
| * is never called if user requests 1/1 rate | |
| */ | |
| ret = __cs2000_set_rate(priv, ch, ref_clk_rate, ref_clk_rate); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| parent_names[CLK_IN] = __clk_get_name(priv->clk_in); | |
| parent_names[REF_CLK] = __clk_get_name(priv->ref_clk); | |
| init.name = name; | |
| init.ops = &cs2000_ops; | |
| init.flags = CLK_SET_RATE_GATE; | |
| init.parent_names = parent_names; | |
| init.num_parents = ARRAY_SIZE(parent_names); | |
| priv->hw.init = &init; | |
| ret = clk_hw_register(dev, &priv->hw); | |
| if (ret) | |
| return ret; | |
| ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &priv->hw); | |
| if (ret < 0) { | |
| clk_hw_unregister(&priv->hw); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int cs2000_version_print(struct cs2000_priv *priv) | |
| { | |
| struct device *dev = priv_to_dev(priv); | |
| const char *revision; | |
| unsigned int val; | |
| int ret; | |
| ret = regmap_read(priv->regmap, DEVICE_ID, &val); | |
| if (ret < 0) | |
| return ret; | |
| /* CS2000 should be 0x0 */ | |
| if (val >> 3) | |
| return -EIO; | |
| switch (val & REVISION_MASK) { | |
| case REVISION_B2_B3: | |
| revision = "B2 / B3"; | |
| break; | |
| case REVISION_C1: | |
| revision = "C1"; | |
| break; | |
| default: | |
| return -EIO; | |
| } | |
| dev_info(dev, "revision - %s\n", revision); | |
| return 0; | |
| } | |
| static void cs2000_remove(struct i2c_client *client) | |
| { | |
| struct cs2000_priv *priv = i2c_get_clientdata(client); | |
| struct device *dev = priv_to_dev(priv); | |
| struct device_node *np = dev->of_node; | |
| of_clk_del_provider(np); | |
| clk_hw_unregister(&priv->hw); | |
| } | |
| static int cs2000_probe(struct i2c_client *client) | |
| { | |
| struct cs2000_priv *priv; | |
| struct device *dev = &client->dev; | |
| int ret; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->client = client; | |
| i2c_set_clientdata(client, priv); | |
| priv->regmap = devm_regmap_init_i2c(client, &cs2000_regmap_config); | |
| if (IS_ERR(priv->regmap)) | |
| return PTR_ERR(priv->regmap); | |
| ret = cs2000_clk_get(priv); | |
| if (ret < 0) | |
| return ret; | |
| ret = cs2000_clk_register(priv); | |
| if (ret < 0) | |
| return ret; | |
| ret = cs2000_version_print(priv); | |
| if (ret < 0) | |
| goto probe_err; | |
| return 0; | |
| probe_err: | |
| cs2000_remove(client); | |
| return ret; | |
| } | |
| static int __maybe_unused cs2000_resume(struct device *dev) | |
| { | |
| struct cs2000_priv *priv = dev_get_drvdata(dev); | |
| return cs2000_set_saved_rate(priv); | |
| } | |
| static const struct dev_pm_ops cs2000_pm_ops = { | |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, cs2000_resume) | |
| }; | |
| static struct i2c_driver cs2000_driver = { | |
| .driver = { | |
| .name = "cs2000-cp", | |
| .pm = &cs2000_pm_ops, | |
| .of_match_table = cs2000_of_match, | |
| }, | |
| .probe = cs2000_probe, | |
| .remove = cs2000_remove, | |
| .id_table = cs2000_id, | |
| }; | |
| module_i2c_driver(cs2000_driver); | |
| MODULE_DESCRIPTION("CS2000-CP driver"); | |
| MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"); | |
| MODULE_LICENSE("GPL v2"); |