| // SPDX-License-Identifier: GPL-2.0 | |
| /* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */ | |
| #include <linux/clk.h> | |
| #include <linux/clockchips.h> | |
| #include <linux/clocksource.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/sched_clock.h> | |
| #define TIMER0_FREQ 1000000 | |
| #define GXP_TIMER_CNT_OFS 0x00 | |
| #define GXP_TIMESTAMP_OFS 0x08 | |
| #define GXP_TIMER_CTRL_OFS 0x14 | |
| /* TCS Stands for Timer Control/Status: these are masks to be used in */ | |
| /* the Timer Count Registers */ | |
| #define MASK_TCS_ENABLE 0x01 | |
| #define MASK_TCS_PERIOD 0x02 | |
| #define MASK_TCS_RELOAD 0x04 | |
| #define MASK_TCS_TC 0x80 | |
| struct gxp_timer { | |
| void __iomem *counter; | |
| void __iomem *control; | |
| struct clock_event_device evt; | |
| }; | |
| static struct gxp_timer *gxp_timer; | |
| static void __iomem *system_clock __ro_after_init; | |
| static inline struct gxp_timer *to_gxp_timer(struct clock_event_device *evt_dev) | |
| { | |
| return container_of(evt_dev, struct gxp_timer, evt); | |
| } | |
| static u64 notrace gxp_sched_read(void) | |
| { | |
| return readl_relaxed(system_clock); | |
| } | |
| static int gxp_time_set_next_event(unsigned long event, struct clock_event_device *evt_dev) | |
| { | |
| struct gxp_timer *timer = to_gxp_timer(evt_dev); | |
| /* Stop counting and disable interrupt before updating */ | |
| writeb_relaxed(MASK_TCS_TC, timer->control); | |
| writel_relaxed(event, timer->counter); | |
| writeb_relaxed(MASK_TCS_TC | MASK_TCS_ENABLE, timer->control); | |
| return 0; | |
| } | |
| static irqreturn_t gxp_timer_interrupt(int irq, void *dev_id) | |
| { | |
| struct gxp_timer *timer = (struct gxp_timer *)dev_id; | |
| if (!(readb_relaxed(timer->control) & MASK_TCS_TC)) | |
| return IRQ_NONE; | |
| writeb_relaxed(MASK_TCS_TC, timer->control); | |
| timer->evt.event_handler(&timer->evt); | |
| return IRQ_HANDLED; | |
| } | |
| static int __init gxp_timer_init(struct device_node *node) | |
| { | |
| void __iomem *base; | |
| struct clk *clk; | |
| u32 freq; | |
| int ret, irq; | |
| gxp_timer = kzalloc(sizeof(*gxp_timer), GFP_KERNEL); | |
| if (!gxp_timer) { | |
| ret = -ENOMEM; | |
| pr_err("Can't allocate gxp_timer"); | |
| return ret; | |
| } | |
| clk = of_clk_get(node, 0); | |
| if (IS_ERR(clk)) { | |
| ret = (int)PTR_ERR(clk); | |
| pr_err("%pOFn clock not found: %d\n", node, ret); | |
| goto err_free; | |
| } | |
| ret = clk_prepare_enable(clk); | |
| if (ret) { | |
| pr_err("%pOFn clock enable failed: %d\n", node, ret); | |
| goto err_clk_enable; | |
| } | |
| base = of_iomap(node, 0); | |
| if (!base) { | |
| ret = -ENXIO; | |
| pr_err("Can't map timer base registers"); | |
| goto err_iomap; | |
| } | |
| /* Set the offsets to the clock register and timer registers */ | |
| gxp_timer->counter = base + GXP_TIMER_CNT_OFS; | |
| gxp_timer->control = base + GXP_TIMER_CTRL_OFS; | |
| system_clock = base + GXP_TIMESTAMP_OFS; | |
| gxp_timer->evt.name = node->name; | |
| gxp_timer->evt.rating = 300; | |
| gxp_timer->evt.features = CLOCK_EVT_FEAT_ONESHOT; | |
| gxp_timer->evt.set_next_event = gxp_time_set_next_event; | |
| gxp_timer->evt.cpumask = cpumask_of(0); | |
| irq = irq_of_parse_and_map(node, 0); | |
| if (irq <= 0) { | |
| ret = -EINVAL; | |
| pr_err("GXP Timer Can't parse IRQ %d", irq); | |
| goto err_exit; | |
| } | |
| freq = clk_get_rate(clk); | |
| ret = clocksource_mmio_init(system_clock, node->name, freq, | |
| 300, 32, clocksource_mmio_readl_up); | |
| if (ret) { | |
| pr_err("%pOFn init clocksource failed: %d", node, ret); | |
| goto err_exit; | |
| } | |
| sched_clock_register(gxp_sched_read, 32, freq); | |
| irq = irq_of_parse_and_map(node, 0); | |
| if (irq <= 0) { | |
| ret = -EINVAL; | |
| pr_err("%pOFn Can't parse IRQ %d", node, irq); | |
| goto err_exit; | |
| } | |
| clockevents_config_and_register(&gxp_timer->evt, TIMER0_FREQ, | |
| 0xf, 0xffffffff); | |
| ret = request_irq(irq, gxp_timer_interrupt, IRQF_TIMER | IRQF_SHARED, | |
| node->name, gxp_timer); | |
| if (ret) { | |
| pr_err("%pOFn request_irq() failed: %d", node, ret); | |
| goto err_exit; | |
| } | |
| pr_debug("gxp: system timer (irq = %d)\n", irq); | |
| return 0; | |
| err_exit: | |
| iounmap(base); | |
| err_iomap: | |
| clk_disable_unprepare(clk); | |
| err_clk_enable: | |
| clk_put(clk); | |
| err_free: | |
| kfree(gxp_timer); | |
| return ret; | |
| } | |
| /* | |
| * This probe gets called after the timer is already up and running. This will create | |
| * the watchdog device as a child since the registers are shared. | |
| */ | |
| static int gxp_timer_probe(struct platform_device *pdev) | |
| { | |
| struct platform_device *gxp_watchdog_device; | |
| struct device *dev = &pdev->dev; | |
| int ret; | |
| if (!gxp_timer) { | |
| pr_err("Gxp Timer not initialized, cannot create watchdog"); | |
| return -ENOMEM; | |
| } | |
| gxp_watchdog_device = platform_device_alloc("gxp-wdt", -1); | |
| if (!gxp_watchdog_device) { | |
| pr_err("Timer failed to allocate gxp-wdt"); | |
| return -ENOMEM; | |
| } | |
| /* Pass the base address (counter) as platform data and nothing else */ | |
| gxp_watchdog_device->dev.platform_data = gxp_timer->counter; | |
| gxp_watchdog_device->dev.parent = dev; | |
| ret = platform_device_add(gxp_watchdog_device); | |
| if (ret) | |
| platform_device_put(gxp_watchdog_device); | |
| return ret; | |
| } | |
| static const struct of_device_id gxp_timer_of_match[] = { | |
| { .compatible = "hpe,gxp-timer", }, | |
| {}, | |
| }; | |
| static struct platform_driver gxp_timer_driver = { | |
| .probe = gxp_timer_probe, | |
| .driver = { | |
| .name = "gxp-timer", | |
| .of_match_table = gxp_timer_of_match, | |
| .suppress_bind_attrs = true, | |
| }, | |
| }; | |
| builtin_platform_driver(gxp_timer_driver); | |
| TIMER_OF_DECLARE(gxp, "hpe,gxp-timer", gxp_timer_init); |