| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Copyright (C) 2017-2018, Intel Corporation | |
| */ | |
| #include <linux/completion.h> | |
| #include <linux/delay.h> | |
| #include <linux/genalloc.h> | |
| #include <linux/io.h> | |
| #include <linux/kfifo.h> | |
| #include <linux/kthread.h> | |
| #include <linux/module.h> | |
| #include <linux/mutex.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/firmware/intel/stratix10-smc.h> | |
| #include <linux/firmware/intel/stratix10-svc-client.h> | |
| #include <linux/types.h> | |
| /** | |
| * SVC_NUM_DATA_IN_FIFO - number of struct stratix10_svc_data in the FIFO | |
| * | |
| * SVC_NUM_CHANNEL - number of channel supported by service layer driver | |
| * | |
| * FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS - claim back the submitted buffer(s) | |
| * from the secure world for FPGA manager to reuse, or to free the buffer(s) | |
| * when all bit-stream data had be send. | |
| * | |
| * FPGA_CONFIG_STATUS_TIMEOUT_SEC - poll the FPGA configuration status, | |
| * service layer will return error to FPGA manager when timeout occurs, | |
| * timeout is set to 30 seconds (30 * 1000) at Intel Stratix10 SoC. | |
| */ | |
| #define SVC_NUM_DATA_IN_FIFO 32 | |
| #define SVC_NUM_CHANNEL 3 | |
| #define FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS 200 | |
| #define FPGA_CONFIG_STATUS_TIMEOUT_SEC 30 | |
| #define BYTE_TO_WORD_SIZE 4 | |
| /* stratix10 service layer clients */ | |
| #define STRATIX10_RSU "stratix10-rsu" | |
| #define INTEL_FCS "intel-fcs" | |
| typedef void (svc_invoke_fn)(unsigned long, unsigned long, unsigned long, | |
| unsigned long, unsigned long, unsigned long, | |
| unsigned long, unsigned long, | |
| struct arm_smccc_res *); | |
| struct stratix10_svc_chan; | |
| /** | |
| * struct stratix10_svc - svc private data | |
| * @stratix10_svc_rsu: pointer to stratix10 RSU device | |
| */ | |
| struct stratix10_svc { | |
| struct platform_device *stratix10_svc_rsu; | |
| struct platform_device *intel_svc_fcs; | |
| }; | |
| /** | |
| * struct stratix10_svc_sh_memory - service shared memory structure | |
| * @sync_complete: state for a completion | |
| * @addr: physical address of shared memory block | |
| * @size: size of shared memory block | |
| * @invoke_fn: function to issue secure monitor or hypervisor call | |
| * | |
| * This struct is used to save physical address and size of shared memory | |
| * block. The shared memory blocked is allocated by secure monitor software | |
| * at secure world. | |
| * | |
| * Service layer driver uses the physical address and size to create a memory | |
| * pool, then allocates data buffer from that memory pool for service client. | |
| */ | |
| struct stratix10_svc_sh_memory { | |
| struct completion sync_complete; | |
| unsigned long addr; | |
| unsigned long size; | |
| svc_invoke_fn *invoke_fn; | |
| }; | |
| /** | |
| * struct stratix10_svc_data_mem - service memory structure | |
| * @vaddr: virtual address | |
| * @paddr: physical address | |
| * @size: size of memory | |
| * @node: link list head node | |
| * | |
| * This struct is used in a list that keeps track of buffers which have | |
| * been allocated or freed from the memory pool. Service layer driver also | |
| * uses this struct to transfer physical address to virtual address. | |
| */ | |
| struct stratix10_svc_data_mem { | |
| void *vaddr; | |
| phys_addr_t paddr; | |
| size_t size; | |
| struct list_head node; | |
| }; | |
| /** | |
| * struct stratix10_svc_data - service data structure | |
| * @chan: service channel | |
| * @paddr: physical address of to be processed payload | |
| * @size: to be processed playload size | |
| * @paddr_output: physical address of processed payload | |
| * @size_output: processed payload size | |
| * @command: service command requested by client | |
| * @flag: configuration type (full or partial) | |
| * @arg: args to be passed via registers and not physically mapped buffers | |
| * | |
| * This struct is used in service FIFO for inter-process communication. | |
| */ | |
| struct stratix10_svc_data { | |
| struct stratix10_svc_chan *chan; | |
| phys_addr_t paddr; | |
| size_t size; | |
| phys_addr_t paddr_output; | |
| size_t size_output; | |
| u32 command; | |
| u32 flag; | |
| u64 arg[3]; | |
| }; | |
| /** | |
| * struct stratix10_svc_controller - service controller | |
| * @dev: device | |
| * @chans: array of service channels | |
| * @num_chans: number of channels in 'chans' array | |
| * @num_active_client: number of active service client | |
| * @node: list management | |
| * @genpool: memory pool pointing to the memory region | |
| * @task: pointer to the thread task which handles SMC or HVC call | |
| * @svc_fifo: a queue for storing service message data | |
| * @complete_status: state for completion | |
| * @svc_fifo_lock: protect access to service message data queue | |
| * @invoke_fn: function to issue secure monitor call or hypervisor call | |
| * | |
| * This struct is used to create communication channels for service clients, to | |
| * handle secure monitor or hypervisor call. | |
| */ | |
| struct stratix10_svc_controller { | |
| struct device *dev; | |
| struct stratix10_svc_chan *chans; | |
| int num_chans; | |
| int num_active_client; | |
| struct list_head node; | |
| struct gen_pool *genpool; | |
| struct task_struct *task; | |
| struct kfifo svc_fifo; | |
| struct completion complete_status; | |
| spinlock_t svc_fifo_lock; | |
| svc_invoke_fn *invoke_fn; | |
| }; | |
| /** | |
| * struct stratix10_svc_chan - service communication channel | |
| * @ctrl: pointer to service controller which is the provider of this channel | |
| * @scl: pointer to service client which owns the channel | |
| * @name: service client name associated with the channel | |
| * @lock: protect access to the channel | |
| * | |
| * This struct is used by service client to communicate with service layer, each | |
| * service client has its own channel created by service controller. | |
| */ | |
| struct stratix10_svc_chan { | |
| struct stratix10_svc_controller *ctrl; | |
| struct stratix10_svc_client *scl; | |
| char *name; | |
| spinlock_t lock; | |
| }; | |
| static LIST_HEAD(svc_ctrl); | |
| static LIST_HEAD(svc_data_mem); | |
| /** | |
| * svc_pa_to_va() - translate physical address to virtual address | |
| * @addr: to be translated physical address | |
| * | |
| * Return: valid virtual address or NULL if the provided physical | |
| * address doesn't exist. | |
| */ | |
| static void *svc_pa_to_va(unsigned long addr) | |
| { | |
| struct stratix10_svc_data_mem *pmem; | |
| pr_debug("claim back P-addr=0x%016x\n", (unsigned int)addr); | |
| list_for_each_entry(pmem, &svc_data_mem, node) | |
| if (pmem->paddr == addr) | |
| return pmem->vaddr; | |
| /* physical address is not found */ | |
| return NULL; | |
| } | |
| /** | |
| * svc_thread_cmd_data_claim() - claim back buffer from the secure world | |
| * @ctrl: pointer to service layer controller | |
| * @p_data: pointer to service data structure | |
| * @cb_data: pointer to callback data structure to service client | |
| * | |
| * Claim back the submitted buffers from the secure world and pass buffer | |
| * back to service client (FPGA manager, etc) for reuse. | |
| */ | |
| static void svc_thread_cmd_data_claim(struct stratix10_svc_controller *ctrl, | |
| struct stratix10_svc_data *p_data, | |
| struct stratix10_svc_cb_data *cb_data) | |
| { | |
| struct arm_smccc_res res; | |
| unsigned long timeout; | |
| reinit_completion(&ctrl->complete_status); | |
| timeout = msecs_to_jiffies(FPGA_CONFIG_DATA_CLAIM_TIMEOUT_MS); | |
| pr_debug("%s: claim back the submitted buffer\n", __func__); | |
| do { | |
| ctrl->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE, | |
| 0, 0, 0, 0, 0, 0, 0, &res); | |
| if (res.a0 == INTEL_SIP_SMC_STATUS_OK) { | |
| if (!res.a1) { | |
| complete(&ctrl->complete_status); | |
| break; | |
| } | |
| cb_data->status = BIT(SVC_STATUS_BUFFER_DONE); | |
| cb_data->kaddr1 = svc_pa_to_va(res.a1); | |
| cb_data->kaddr2 = (res.a2) ? | |
| svc_pa_to_va(res.a2) : NULL; | |
| cb_data->kaddr3 = (res.a3) ? | |
| svc_pa_to_va(res.a3) : NULL; | |
| p_data->chan->scl->receive_cb(p_data->chan->scl, | |
| cb_data); | |
| } else { | |
| pr_debug("%s: secure world busy, polling again\n", | |
| __func__); | |
| } | |
| } while (res.a0 == INTEL_SIP_SMC_STATUS_OK || | |
| res.a0 == INTEL_SIP_SMC_STATUS_BUSY || | |
| wait_for_completion_timeout(&ctrl->complete_status, timeout)); | |
| } | |
| /** | |
| * svc_thread_cmd_config_status() - check configuration status | |
| * @ctrl: pointer to service layer controller | |
| * @p_data: pointer to service data structure | |
| * @cb_data: pointer to callback data structure to service client | |
| * | |
| * Check whether the secure firmware at secure world has finished the FPGA | |
| * configuration, and then inform FPGA manager the configuration status. | |
| */ | |
| static void svc_thread_cmd_config_status(struct stratix10_svc_controller *ctrl, | |
| struct stratix10_svc_data *p_data, | |
| struct stratix10_svc_cb_data *cb_data) | |
| { | |
| struct arm_smccc_res res; | |
| int count_in_sec; | |
| unsigned long a0, a1, a2; | |
| cb_data->kaddr1 = NULL; | |
| cb_data->kaddr2 = NULL; | |
| cb_data->kaddr3 = NULL; | |
| cb_data->status = BIT(SVC_STATUS_ERROR); | |
| pr_debug("%s: polling config status\n", __func__); | |
| a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE; | |
| a1 = (unsigned long)p_data->paddr; | |
| a2 = (unsigned long)p_data->size; | |
| if (p_data->command == COMMAND_POLL_SERVICE_STATUS) | |
| a0 = INTEL_SIP_SMC_SERVICE_COMPLETED; | |
| count_in_sec = FPGA_CONFIG_STATUS_TIMEOUT_SEC; | |
| while (count_in_sec) { | |
| ctrl->invoke_fn(a0, a1, a2, 0, 0, 0, 0, 0, &res); | |
| if ((res.a0 == INTEL_SIP_SMC_STATUS_OK) || | |
| (res.a0 == INTEL_SIP_SMC_STATUS_ERROR) || | |
| (res.a0 == INTEL_SIP_SMC_STATUS_REJECTED)) | |
| break; | |
| /* | |
| * request is still in progress, wait one second then | |
| * poll again | |
| */ | |
| msleep(1000); | |
| count_in_sec--; | |
| } | |
| if (!count_in_sec) { | |
| pr_err("%s: poll status timeout\n", __func__); | |
| cb_data->status = BIT(SVC_STATUS_BUSY); | |
| } else if (res.a0 == INTEL_SIP_SMC_STATUS_OK) { | |
| cb_data->status = BIT(SVC_STATUS_COMPLETED); | |
| cb_data->kaddr2 = (res.a2) ? | |
| svc_pa_to_va(res.a2) : NULL; | |
| cb_data->kaddr3 = (res.a3) ? &res.a3 : NULL; | |
| } else { | |
| pr_err("%s: poll status error\n", __func__); | |
| cb_data->kaddr1 = &res.a1; | |
| cb_data->kaddr2 = (res.a2) ? | |
| svc_pa_to_va(res.a2) : NULL; | |
| cb_data->kaddr3 = (res.a3) ? &res.a3 : NULL; | |
| cb_data->status = BIT(SVC_STATUS_ERROR); | |
| } | |
| p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data); | |
| } | |
| /** | |
| * svc_thread_recv_status_ok() - handle the successful status | |
| * @p_data: pointer to service data structure | |
| * @cb_data: pointer to callback data structure to service client | |
| * @res: result from SMC or HVC call | |
| * | |
| * Send back the correspond status to the service clients. | |
| */ | |
| static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data, | |
| struct stratix10_svc_cb_data *cb_data, | |
| struct arm_smccc_res res) | |
| { | |
| cb_data->kaddr1 = NULL; | |
| cb_data->kaddr2 = NULL; | |
| cb_data->kaddr3 = NULL; | |
| switch (p_data->command) { | |
| case COMMAND_RECONFIG: | |
| case COMMAND_RSU_UPDATE: | |
| case COMMAND_RSU_NOTIFY: | |
| case COMMAND_FCS_REQUEST_SERVICE: | |
| case COMMAND_FCS_SEND_CERTIFICATE: | |
| case COMMAND_FCS_DATA_ENCRYPTION: | |
| case COMMAND_FCS_DATA_DECRYPTION: | |
| cb_data->status = BIT(SVC_STATUS_OK); | |
| break; | |
| case COMMAND_RECONFIG_DATA_SUBMIT: | |
| cb_data->status = BIT(SVC_STATUS_BUFFER_SUBMITTED); | |
| break; | |
| case COMMAND_RECONFIG_STATUS: | |
| cb_data->status = BIT(SVC_STATUS_COMPLETED); | |
| break; | |
| case COMMAND_RSU_RETRY: | |
| case COMMAND_RSU_MAX_RETRY: | |
| case COMMAND_RSU_DCMF_STATUS: | |
| case COMMAND_FIRMWARE_VERSION: | |
| cb_data->status = BIT(SVC_STATUS_OK); | |
| cb_data->kaddr1 = &res.a1; | |
| break; | |
| case COMMAND_SMC_SVC_VERSION: | |
| cb_data->status = BIT(SVC_STATUS_OK); | |
| cb_data->kaddr1 = &res.a1; | |
| cb_data->kaddr2 = &res.a2; | |
| break; | |
| case COMMAND_RSU_DCMF_VERSION: | |
| cb_data->status = BIT(SVC_STATUS_OK); | |
| cb_data->kaddr1 = &res.a1; | |
| cb_data->kaddr2 = &res.a2; | |
| break; | |
| case COMMAND_FCS_RANDOM_NUMBER_GEN: | |
| case COMMAND_FCS_GET_PROVISION_DATA: | |
| case COMMAND_POLL_SERVICE_STATUS: | |
| cb_data->status = BIT(SVC_STATUS_OK); | |
| cb_data->kaddr1 = &res.a1; | |
| cb_data->kaddr2 = svc_pa_to_va(res.a2); | |
| cb_data->kaddr3 = &res.a3; | |
| break; | |
| case COMMAND_MBOX_SEND_CMD: | |
| cb_data->status = BIT(SVC_STATUS_OK); | |
| cb_data->kaddr1 = &res.a1; | |
| /* SDM return size in u8. Convert size to u32 word */ | |
| res.a2 = res.a2 * BYTE_TO_WORD_SIZE; | |
| cb_data->kaddr2 = &res.a2; | |
| break; | |
| default: | |
| pr_warn("it shouldn't happen\n"); | |
| break; | |
| } | |
| pr_debug("%s: call receive_cb\n", __func__); | |
| p_data->chan->scl->receive_cb(p_data->chan->scl, cb_data); | |
| } | |
| /** | |
| * svc_normal_to_secure_thread() - the function to run in the kthread | |
| * @data: data pointer for kthread function | |
| * | |
| * Service layer driver creates stratix10_svc_smc_hvc_call kthread on CPU | |
| * node 0, its function stratix10_svc_secure_call_thread is used to handle | |
| * SMC or HVC calls between kernel driver and secure monitor software. | |
| * | |
| * Return: 0 for success or -ENOMEM on error. | |
| */ | |
| static int svc_normal_to_secure_thread(void *data) | |
| { | |
| struct stratix10_svc_controller | |
| *ctrl = (struct stratix10_svc_controller *)data; | |
| struct stratix10_svc_data *pdata; | |
| struct stratix10_svc_cb_data *cbdata; | |
| struct arm_smccc_res res; | |
| unsigned long a0, a1, a2, a3, a4, a5, a6, a7; | |
| int ret_fifo = 0; | |
| pdata = kmalloc(sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return -ENOMEM; | |
| cbdata = kmalloc(sizeof(*cbdata), GFP_KERNEL); | |
| if (!cbdata) { | |
| kfree(pdata); | |
| return -ENOMEM; | |
| } | |
| /* default set, to remove build warning */ | |
| a0 = INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK; | |
| a1 = 0; | |
| a2 = 0; | |
| a3 = 0; | |
| a4 = 0; | |
| a5 = 0; | |
| a6 = 0; | |
| a7 = 0; | |
| pr_debug("smc_hvc_shm_thread is running\n"); | |
| while (!kthread_should_stop()) { | |
| ret_fifo = kfifo_out_spinlocked(&ctrl->svc_fifo, | |
| pdata, sizeof(*pdata), | |
| &ctrl->svc_fifo_lock); | |
| if (!ret_fifo) | |
| continue; | |
| pr_debug("get from FIFO pa=0x%016x, command=%u, size=%u\n", | |
| (unsigned int)pdata->paddr, pdata->command, | |
| (unsigned int)pdata->size); | |
| switch (pdata->command) { | |
| case COMMAND_RECONFIG_DATA_CLAIM: | |
| svc_thread_cmd_data_claim(ctrl, pdata, cbdata); | |
| continue; | |
| case COMMAND_RECONFIG: | |
| a0 = INTEL_SIP_SMC_FPGA_CONFIG_START; | |
| pr_debug("conf_type=%u\n", (unsigned int)pdata->flag); | |
| a1 = pdata->flag; | |
| a2 = 0; | |
| break; | |
| case COMMAND_RECONFIG_DATA_SUBMIT: | |
| a0 = INTEL_SIP_SMC_FPGA_CONFIG_WRITE; | |
| a1 = (unsigned long)pdata->paddr; | |
| a2 = (unsigned long)pdata->size; | |
| break; | |
| case COMMAND_RECONFIG_STATUS: | |
| a0 = INTEL_SIP_SMC_FPGA_CONFIG_ISDONE; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| case COMMAND_RSU_STATUS: | |
| a0 = INTEL_SIP_SMC_RSU_STATUS; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| case COMMAND_RSU_UPDATE: | |
| a0 = INTEL_SIP_SMC_RSU_UPDATE; | |
| a1 = pdata->arg[0]; | |
| a2 = 0; | |
| break; | |
| case COMMAND_RSU_NOTIFY: | |
| a0 = INTEL_SIP_SMC_RSU_NOTIFY; | |
| a1 = pdata->arg[0]; | |
| a2 = 0; | |
| break; | |
| case COMMAND_RSU_RETRY: | |
| a0 = INTEL_SIP_SMC_RSU_RETRY_COUNTER; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| case COMMAND_RSU_MAX_RETRY: | |
| a0 = INTEL_SIP_SMC_RSU_MAX_RETRY; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| case COMMAND_RSU_DCMF_VERSION: | |
| a0 = INTEL_SIP_SMC_RSU_DCMF_VERSION; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| case COMMAND_FIRMWARE_VERSION: | |
| a0 = INTEL_SIP_SMC_FIRMWARE_VERSION; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| /* for FCS */ | |
| case COMMAND_FCS_DATA_ENCRYPTION: | |
| a0 = INTEL_SIP_SMC_FCS_CRYPTION; | |
| a1 = 1; | |
| a2 = (unsigned long)pdata->paddr; | |
| a3 = (unsigned long)pdata->size; | |
| a4 = (unsigned long)pdata->paddr_output; | |
| a5 = (unsigned long)pdata->size_output; | |
| break; | |
| case COMMAND_FCS_DATA_DECRYPTION: | |
| a0 = INTEL_SIP_SMC_FCS_CRYPTION; | |
| a1 = 0; | |
| a2 = (unsigned long)pdata->paddr; | |
| a3 = (unsigned long)pdata->size; | |
| a4 = (unsigned long)pdata->paddr_output; | |
| a5 = (unsigned long)pdata->size_output; | |
| break; | |
| case COMMAND_FCS_RANDOM_NUMBER_GEN: | |
| a0 = INTEL_SIP_SMC_FCS_RANDOM_NUMBER; | |
| a1 = (unsigned long)pdata->paddr; | |
| a2 = 0; | |
| break; | |
| case COMMAND_FCS_REQUEST_SERVICE: | |
| a0 = INTEL_SIP_SMC_FCS_SERVICE_REQUEST; | |
| a1 = (unsigned long)pdata->paddr; | |
| a2 = (unsigned long)pdata->size; | |
| break; | |
| case COMMAND_FCS_SEND_CERTIFICATE: | |
| a0 = INTEL_SIP_SMC_FCS_SEND_CERTIFICATE; | |
| a1 = (unsigned long)pdata->paddr; | |
| a2 = (unsigned long)pdata->size; | |
| break; | |
| case COMMAND_FCS_GET_PROVISION_DATA: | |
| a0 = INTEL_SIP_SMC_FCS_GET_PROVISION_DATA; | |
| a1 = (unsigned long)pdata->paddr; | |
| a2 = 0; | |
| break; | |
| /* for polling */ | |
| case COMMAND_POLL_SERVICE_STATUS: | |
| a0 = INTEL_SIP_SMC_SERVICE_COMPLETED; | |
| a1 = (unsigned long)pdata->paddr; | |
| a2 = (unsigned long)pdata->size; | |
| break; | |
| case COMMAND_RSU_DCMF_STATUS: | |
| a0 = INTEL_SIP_SMC_RSU_DCMF_STATUS; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| case COMMAND_SMC_SVC_VERSION: | |
| a0 = INTEL_SIP_SMC_SVC_VERSION; | |
| a1 = 0; | |
| a2 = 0; | |
| break; | |
| case COMMAND_MBOX_SEND_CMD: | |
| a0 = INTEL_SIP_SMC_MBOX_SEND_CMD; | |
| a1 = pdata->arg[0]; | |
| a2 = (unsigned long)pdata->paddr; | |
| a3 = (unsigned long)pdata->size / BYTE_TO_WORD_SIZE; | |
| a4 = pdata->arg[1]; | |
| a5 = (unsigned long)pdata->paddr_output; | |
| a6 = (unsigned long)pdata->size_output / BYTE_TO_WORD_SIZE; | |
| break; | |
| default: | |
| pr_warn("it shouldn't happen\n"); | |
| break; | |
| } | |
| pr_debug("%s: before SMC call -- a0=0x%016x a1=0x%016x", | |
| __func__, | |
| (unsigned int)a0, | |
| (unsigned int)a1); | |
| pr_debug(" a2=0x%016x\n", (unsigned int)a2); | |
| pr_debug(" a3=0x%016x\n", (unsigned int)a3); | |
| pr_debug(" a4=0x%016x\n", (unsigned int)a4); | |
| pr_debug(" a5=0x%016x\n", (unsigned int)a5); | |
| ctrl->invoke_fn(a0, a1, a2, a3, a4, a5, a6, a7, &res); | |
| pr_debug("%s: after SMC call -- res.a0=0x%016x", | |
| __func__, (unsigned int)res.a0); | |
| pr_debug(" res.a1=0x%016x, res.a2=0x%016x", | |
| (unsigned int)res.a1, (unsigned int)res.a2); | |
| pr_debug(" res.a3=0x%016x\n", (unsigned int)res.a3); | |
| if (pdata->command == COMMAND_RSU_STATUS) { | |
| if (res.a0 == INTEL_SIP_SMC_RSU_ERROR) | |
| cbdata->status = BIT(SVC_STATUS_ERROR); | |
| else | |
| cbdata->status = BIT(SVC_STATUS_OK); | |
| cbdata->kaddr1 = &res; | |
| cbdata->kaddr2 = NULL; | |
| cbdata->kaddr3 = NULL; | |
| pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata); | |
| continue; | |
| } | |
| switch (res.a0) { | |
| case INTEL_SIP_SMC_STATUS_OK: | |
| svc_thread_recv_status_ok(pdata, cbdata, res); | |
| break; | |
| case INTEL_SIP_SMC_STATUS_BUSY: | |
| switch (pdata->command) { | |
| case COMMAND_RECONFIG_DATA_SUBMIT: | |
| svc_thread_cmd_data_claim(ctrl, | |
| pdata, cbdata); | |
| break; | |
| case COMMAND_RECONFIG_STATUS: | |
| case COMMAND_POLL_SERVICE_STATUS: | |
| svc_thread_cmd_config_status(ctrl, | |
| pdata, cbdata); | |
| break; | |
| default: | |
| pr_warn("it shouldn't happen\n"); | |
| break; | |
| } | |
| break; | |
| case INTEL_SIP_SMC_STATUS_REJECTED: | |
| pr_debug("%s: STATUS_REJECTED\n", __func__); | |
| /* for FCS */ | |
| switch (pdata->command) { | |
| case COMMAND_FCS_REQUEST_SERVICE: | |
| case COMMAND_FCS_SEND_CERTIFICATE: | |
| case COMMAND_FCS_GET_PROVISION_DATA: | |
| case COMMAND_FCS_DATA_ENCRYPTION: | |
| case COMMAND_FCS_DATA_DECRYPTION: | |
| case COMMAND_FCS_RANDOM_NUMBER_GEN: | |
| case COMMAND_MBOX_SEND_CMD: | |
| cbdata->status = BIT(SVC_STATUS_INVALID_PARAM); | |
| cbdata->kaddr1 = NULL; | |
| cbdata->kaddr2 = NULL; | |
| cbdata->kaddr3 = NULL; | |
| pdata->chan->scl->receive_cb(pdata->chan->scl, | |
| cbdata); | |
| break; | |
| } | |
| break; | |
| case INTEL_SIP_SMC_STATUS_ERROR: | |
| case INTEL_SIP_SMC_RSU_ERROR: | |
| pr_err("%s: STATUS_ERROR\n", __func__); | |
| cbdata->status = BIT(SVC_STATUS_ERROR); | |
| cbdata->kaddr1 = &res.a1; | |
| cbdata->kaddr2 = (res.a2) ? | |
| svc_pa_to_va(res.a2) : NULL; | |
| cbdata->kaddr3 = (res.a3) ? &res.a3 : NULL; | |
| pdata->chan->scl->receive_cb(pdata->chan->scl, cbdata); | |
| break; | |
| default: | |
| pr_warn("Secure firmware doesn't support...\n"); | |
| /* | |
| * be compatible with older version firmware which | |
| * doesn't support newer RSU commands | |
| */ | |
| if ((pdata->command != COMMAND_RSU_UPDATE) && | |
| (pdata->command != COMMAND_RSU_STATUS)) { | |
| cbdata->status = | |
| BIT(SVC_STATUS_NO_SUPPORT); | |
| cbdata->kaddr1 = NULL; | |
| cbdata->kaddr2 = NULL; | |
| cbdata->kaddr3 = NULL; | |
| pdata->chan->scl->receive_cb( | |
| pdata->chan->scl, cbdata); | |
| } | |
| break; | |
| } | |
| } | |
| kfree(cbdata); | |
| kfree(pdata); | |
| return 0; | |
| } | |
| /** | |
| * svc_normal_to_secure_shm_thread() - the function to run in the kthread | |
| * @data: data pointer for kthread function | |
| * | |
| * Service layer driver creates stratix10_svc_smc_hvc_shm kthread on CPU | |
| * node 0, its function stratix10_svc_secure_shm_thread is used to query the | |
| * physical address of memory block reserved by secure monitor software at | |
| * secure world. | |
| * | |
| * svc_normal_to_secure_shm_thread() terminates directly since it is a | |
| * standlone thread for which no one will call kthread_stop() or return when | |
| * 'kthread_should_stop()' is true. | |
| */ | |
| static int svc_normal_to_secure_shm_thread(void *data) | |
| { | |
| struct stratix10_svc_sh_memory | |
| *sh_mem = (struct stratix10_svc_sh_memory *)data; | |
| struct arm_smccc_res res; | |
| /* SMC or HVC call to get shared memory info from secure world */ | |
| sh_mem->invoke_fn(INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM, | |
| 0, 0, 0, 0, 0, 0, 0, &res); | |
| if (res.a0 == INTEL_SIP_SMC_STATUS_OK) { | |
| sh_mem->addr = res.a1; | |
| sh_mem->size = res.a2; | |
| } else { | |
| pr_err("%s: after SMC call -- res.a0=0x%016x", __func__, | |
| (unsigned int)res.a0); | |
| sh_mem->addr = 0; | |
| sh_mem->size = 0; | |
| } | |
| complete(&sh_mem->sync_complete); | |
| return 0; | |
| } | |
| /** | |
| * svc_get_sh_memory() - get memory block reserved by secure monitor SW | |
| * @pdev: pointer to service layer device | |
| * @sh_memory: pointer to service shared memory structure | |
| * | |
| * Return: zero for successfully getting the physical address of memory block | |
| * reserved by secure monitor software, or negative value on error. | |
| */ | |
| static int svc_get_sh_memory(struct platform_device *pdev, | |
| struct stratix10_svc_sh_memory *sh_memory) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct task_struct *sh_memory_task; | |
| unsigned int cpu = 0; | |
| init_completion(&sh_memory->sync_complete); | |
| /* smc or hvc call happens on cpu 0 bound kthread */ | |
| sh_memory_task = kthread_create_on_node(svc_normal_to_secure_shm_thread, | |
| (void *)sh_memory, | |
| cpu_to_node(cpu), | |
| "svc_smc_hvc_shm_thread"); | |
| if (IS_ERR(sh_memory_task)) { | |
| dev_err(dev, "fail to create stratix10_svc_smc_shm_thread\n"); | |
| return -EINVAL; | |
| } | |
| wake_up_process(sh_memory_task); | |
| if (!wait_for_completion_timeout(&sh_memory->sync_complete, 10 * HZ)) { | |
| dev_err(dev, | |
| "timeout to get sh-memory paras from secure world\n"); | |
| return -ETIMEDOUT; | |
| } | |
| if (!sh_memory->addr || !sh_memory->size) { | |
| dev_err(dev, | |
| "failed to get shared memory info from secure world\n"); | |
| return -ENOMEM; | |
| } | |
| dev_dbg(dev, "SM software provides paddr: 0x%016x, size: 0x%08x\n", | |
| (unsigned int)sh_memory->addr, | |
| (unsigned int)sh_memory->size); | |
| return 0; | |
| } | |
| /** | |
| * svc_create_memory_pool() - create a memory pool from reserved memory block | |
| * @pdev: pointer to service layer device | |
| * @sh_memory: pointer to service shared memory structure | |
| * | |
| * Return: pool allocated from reserved memory block or ERR_PTR() on error. | |
| */ | |
| static struct gen_pool * | |
| svc_create_memory_pool(struct platform_device *pdev, | |
| struct stratix10_svc_sh_memory *sh_memory) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct gen_pool *genpool; | |
| unsigned long vaddr; | |
| phys_addr_t paddr; | |
| size_t size; | |
| phys_addr_t begin; | |
| phys_addr_t end; | |
| void *va; | |
| size_t page_mask = PAGE_SIZE - 1; | |
| int min_alloc_order = 3; | |
| int ret; | |
| begin = roundup(sh_memory->addr, PAGE_SIZE); | |
| end = rounddown(sh_memory->addr + sh_memory->size, PAGE_SIZE); | |
| paddr = begin; | |
| size = end - begin; | |
| va = devm_memremap(dev, paddr, size, MEMREMAP_WC); | |
| if (IS_ERR(va)) { | |
| dev_err(dev, "fail to remap shared memory\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| vaddr = (unsigned long)va; | |
| dev_dbg(dev, | |
| "reserved memory vaddr: %p, paddr: 0x%16x size: 0x%8x\n", | |
| va, (unsigned int)paddr, (unsigned int)size); | |
| if ((vaddr & page_mask) || (paddr & page_mask) || | |
| (size & page_mask)) { | |
| dev_err(dev, "page is not aligned\n"); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| genpool = gen_pool_create(min_alloc_order, -1); | |
| if (!genpool) { | |
| dev_err(dev, "fail to create genpool\n"); | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| gen_pool_set_algo(genpool, gen_pool_best_fit, NULL); | |
| ret = gen_pool_add_virt(genpool, vaddr, paddr, size, -1); | |
| if (ret) { | |
| dev_err(dev, "fail to add memory chunk to the pool\n"); | |
| gen_pool_destroy(genpool); | |
| return ERR_PTR(ret); | |
| } | |
| return genpool; | |
| } | |
| /** | |
| * svc_smccc_smc() - secure monitor call between normal and secure world | |
| * @a0: argument passed in registers 0 | |
| * @a1: argument passed in registers 1 | |
| * @a2: argument passed in registers 2 | |
| * @a3: argument passed in registers 3 | |
| * @a4: argument passed in registers 4 | |
| * @a5: argument passed in registers 5 | |
| * @a6: argument passed in registers 6 | |
| * @a7: argument passed in registers 7 | |
| * @res: result values from register 0 to 3 | |
| */ | |
| static void svc_smccc_smc(unsigned long a0, unsigned long a1, | |
| unsigned long a2, unsigned long a3, | |
| unsigned long a4, unsigned long a5, | |
| unsigned long a6, unsigned long a7, | |
| struct arm_smccc_res *res) | |
| { | |
| arm_smccc_smc(a0, a1, a2, a3, a4, a5, a6, a7, res); | |
| } | |
| /** | |
| * svc_smccc_hvc() - hypervisor call between normal and secure world | |
| * @a0: argument passed in registers 0 | |
| * @a1: argument passed in registers 1 | |
| * @a2: argument passed in registers 2 | |
| * @a3: argument passed in registers 3 | |
| * @a4: argument passed in registers 4 | |
| * @a5: argument passed in registers 5 | |
| * @a6: argument passed in registers 6 | |
| * @a7: argument passed in registers 7 | |
| * @res: result values from register 0 to 3 | |
| */ | |
| static void svc_smccc_hvc(unsigned long a0, unsigned long a1, | |
| unsigned long a2, unsigned long a3, | |
| unsigned long a4, unsigned long a5, | |
| unsigned long a6, unsigned long a7, | |
| struct arm_smccc_res *res) | |
| { | |
| arm_smccc_hvc(a0, a1, a2, a3, a4, a5, a6, a7, res); | |
| } | |
| /** | |
| * get_invoke_func() - invoke SMC or HVC call | |
| * @dev: pointer to device | |
| * | |
| * Return: function pointer to svc_smccc_smc or svc_smccc_hvc. | |
| */ | |
| static svc_invoke_fn *get_invoke_func(struct device *dev) | |
| { | |
| const char *method; | |
| if (of_property_read_string(dev->of_node, "method", &method)) { | |
| dev_warn(dev, "missing \"method\" property\n"); | |
| return ERR_PTR(-ENXIO); | |
| } | |
| if (!strcmp(method, "smc")) | |
| return svc_smccc_smc; | |
| if (!strcmp(method, "hvc")) | |
| return svc_smccc_hvc; | |
| dev_warn(dev, "invalid \"method\" property: %s\n", method); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| /** | |
| * stratix10_svc_request_channel_byname() - request a service channel | |
| * @client: pointer to service client | |
| * @name: service client name | |
| * | |
| * This function is used by service client to request a service channel. | |
| * | |
| * Return: a pointer to channel assigned to the client on success, | |
| * or ERR_PTR() on error. | |
| */ | |
| struct stratix10_svc_chan *stratix10_svc_request_channel_byname( | |
| struct stratix10_svc_client *client, const char *name) | |
| { | |
| struct device *dev = client->dev; | |
| struct stratix10_svc_controller *controller; | |
| struct stratix10_svc_chan *chan = NULL; | |
| unsigned long flag; | |
| int i; | |
| /* if probe was called after client's, or error on probe */ | |
| if (list_empty(&svc_ctrl)) | |
| return ERR_PTR(-EPROBE_DEFER); | |
| controller = list_first_entry(&svc_ctrl, | |
| struct stratix10_svc_controller, node); | |
| for (i = 0; i < SVC_NUM_CHANNEL; i++) { | |
| if (!strcmp(controller->chans[i].name, name)) { | |
| chan = &controller->chans[i]; | |
| break; | |
| } | |
| } | |
| /* if there was no channel match */ | |
| if (i == SVC_NUM_CHANNEL) { | |
| dev_err(dev, "%s: channel not allocated\n", __func__); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| if (chan->scl || !try_module_get(controller->dev->driver->owner)) { | |
| dev_dbg(dev, "%s: svc not free\n", __func__); | |
| return ERR_PTR(-EBUSY); | |
| } | |
| spin_lock_irqsave(&chan->lock, flag); | |
| chan->scl = client; | |
| chan->ctrl->num_active_client++; | |
| spin_unlock_irqrestore(&chan->lock, flag); | |
| return chan; | |
| } | |
| EXPORT_SYMBOL_GPL(stratix10_svc_request_channel_byname); | |
| /** | |
| * stratix10_svc_free_channel() - free service channel | |
| * @chan: service channel to be freed | |
| * | |
| * This function is used by service client to free a service channel. | |
| */ | |
| void stratix10_svc_free_channel(struct stratix10_svc_chan *chan) | |
| { | |
| unsigned long flag; | |
| spin_lock_irqsave(&chan->lock, flag); | |
| chan->scl = NULL; | |
| chan->ctrl->num_active_client--; | |
| module_put(chan->ctrl->dev->driver->owner); | |
| spin_unlock_irqrestore(&chan->lock, flag); | |
| } | |
| EXPORT_SYMBOL_GPL(stratix10_svc_free_channel); | |
| /** | |
| * stratix10_svc_send() - send a message data to the remote | |
| * @chan: service channel assigned to the client | |
| * @msg: message data to be sent, in the format of | |
| * "struct stratix10_svc_client_msg" | |
| * | |
| * This function is used by service client to add a message to the service | |
| * layer driver's queue for being sent to the secure world. | |
| * | |
| * Return: 0 for success, -ENOMEM or -ENOBUFS on error. | |
| */ | |
| int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg) | |
| { | |
| struct stratix10_svc_client_msg | |
| *p_msg = (struct stratix10_svc_client_msg *)msg; | |
| struct stratix10_svc_data_mem *p_mem; | |
| struct stratix10_svc_data *p_data; | |
| int ret = 0; | |
| unsigned int cpu = 0; | |
| p_data = kzalloc(sizeof(*p_data), GFP_KERNEL); | |
| if (!p_data) | |
| return -ENOMEM; | |
| /* first client will create kernel thread */ | |
| if (!chan->ctrl->task) { | |
| chan->ctrl->task = | |
| kthread_create_on_node(svc_normal_to_secure_thread, | |
| (void *)chan->ctrl, | |
| cpu_to_node(cpu), | |
| "svc_smc_hvc_thread"); | |
| if (IS_ERR(chan->ctrl->task)) { | |
| dev_err(chan->ctrl->dev, | |
| "failed to create svc_smc_hvc_thread\n"); | |
| kfree(p_data); | |
| return -EINVAL; | |
| } | |
| kthread_bind(chan->ctrl->task, cpu); | |
| wake_up_process(chan->ctrl->task); | |
| } | |
| pr_debug("%s: sent P-va=%p, P-com=%x, P-size=%u\n", __func__, | |
| p_msg->payload, p_msg->command, | |
| (unsigned int)p_msg->payload_length); | |
| if (list_empty(&svc_data_mem)) { | |
| if (p_msg->command == COMMAND_RECONFIG) { | |
| struct stratix10_svc_command_config_type *ct = | |
| (struct stratix10_svc_command_config_type *) | |
| p_msg->payload; | |
| p_data->flag = ct->flags; | |
| } | |
| } else { | |
| list_for_each_entry(p_mem, &svc_data_mem, node) | |
| if (p_mem->vaddr == p_msg->payload) { | |
| p_data->paddr = p_mem->paddr; | |
| p_data->size = p_msg->payload_length; | |
| break; | |
| } | |
| if (p_msg->payload_output) { | |
| list_for_each_entry(p_mem, &svc_data_mem, node) | |
| if (p_mem->vaddr == p_msg->payload_output) { | |
| p_data->paddr_output = | |
| p_mem->paddr; | |
| p_data->size_output = | |
| p_msg->payload_length_output; | |
| break; | |
| } | |
| } | |
| } | |
| p_data->command = p_msg->command; | |
| p_data->arg[0] = p_msg->arg[0]; | |
| p_data->arg[1] = p_msg->arg[1]; | |
| p_data->arg[2] = p_msg->arg[2]; | |
| p_data->size = p_msg->payload_length; | |
| p_data->chan = chan; | |
| pr_debug("%s: put to FIFO pa=0x%016x, cmd=%x, size=%u\n", __func__, | |
| (unsigned int)p_data->paddr, p_data->command, | |
| (unsigned int)p_data->size); | |
| ret = kfifo_in_spinlocked(&chan->ctrl->svc_fifo, p_data, | |
| sizeof(*p_data), | |
| &chan->ctrl->svc_fifo_lock); | |
| kfree(p_data); | |
| if (!ret) | |
| return -ENOBUFS; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(stratix10_svc_send); | |
| /** | |
| * stratix10_svc_done() - complete service request transactions | |
| * @chan: service channel assigned to the client | |
| * | |
| * This function should be called when client has finished its request | |
| * or there is an error in the request process. It allows the service layer | |
| * to stop the running thread to have maximize savings in kernel resources. | |
| */ | |
| void stratix10_svc_done(struct stratix10_svc_chan *chan) | |
| { | |
| /* stop thread when thread is running AND only one active client */ | |
| if (chan->ctrl->task && chan->ctrl->num_active_client <= 1) { | |
| pr_debug("svc_smc_hvc_shm_thread is stopped\n"); | |
| kthread_stop(chan->ctrl->task); | |
| chan->ctrl->task = NULL; | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(stratix10_svc_done); | |
| /** | |
| * stratix10_svc_allocate_memory() - allocate memory | |
| * @chan: service channel assigned to the client | |
| * @size: memory size requested by a specific service client | |
| * | |
| * Service layer allocates the requested number of bytes buffer from the | |
| * memory pool, service client uses this function to get allocated buffers. | |
| * | |
| * Return: address of allocated memory on success, or ERR_PTR() on error. | |
| */ | |
| void *stratix10_svc_allocate_memory(struct stratix10_svc_chan *chan, | |
| size_t size) | |
| { | |
| struct stratix10_svc_data_mem *pmem; | |
| unsigned long va; | |
| phys_addr_t pa; | |
| struct gen_pool *genpool = chan->ctrl->genpool; | |
| size_t s = roundup(size, 1 << genpool->min_alloc_order); | |
| pmem = devm_kzalloc(chan->ctrl->dev, sizeof(*pmem), GFP_KERNEL); | |
| if (!pmem) | |
| return ERR_PTR(-ENOMEM); | |
| va = gen_pool_alloc(genpool, s); | |
| if (!va) | |
| return ERR_PTR(-ENOMEM); | |
| memset((void *)va, 0, s); | |
| pa = gen_pool_virt_to_phys(genpool, va); | |
| pmem->vaddr = (void *)va; | |
| pmem->paddr = pa; | |
| pmem->size = s; | |
| list_add_tail(&pmem->node, &svc_data_mem); | |
| pr_debug("%s: va=%p, pa=0x%016x\n", __func__, | |
| pmem->vaddr, (unsigned int)pmem->paddr); | |
| return (void *)va; | |
| } | |
| EXPORT_SYMBOL_GPL(stratix10_svc_allocate_memory); | |
| /** | |
| * stratix10_svc_free_memory() - free allocated memory | |
| * @chan: service channel assigned to the client | |
| * @kaddr: memory to be freed | |
| * | |
| * This function is used by service client to free allocated buffers. | |
| */ | |
| void stratix10_svc_free_memory(struct stratix10_svc_chan *chan, void *kaddr) | |
| { | |
| struct stratix10_svc_data_mem *pmem; | |
| list_for_each_entry(pmem, &svc_data_mem, node) | |
| if (pmem->vaddr == kaddr) { | |
| gen_pool_free(chan->ctrl->genpool, | |
| (unsigned long)kaddr, pmem->size); | |
| pmem->vaddr = NULL; | |
| list_del(&pmem->node); | |
| return; | |
| } | |
| list_del(&svc_data_mem); | |
| } | |
| EXPORT_SYMBOL_GPL(stratix10_svc_free_memory); | |
| static const struct of_device_id stratix10_svc_drv_match[] = { | |
| {.compatible = "intel,stratix10-svc"}, | |
| {.compatible = "intel,agilex-svc"}, | |
| {}, | |
| }; | |
| static int stratix10_svc_drv_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct stratix10_svc_controller *controller; | |
| struct stratix10_svc_chan *chans; | |
| struct gen_pool *genpool; | |
| struct stratix10_svc_sh_memory *sh_memory; | |
| struct stratix10_svc *svc; | |
| svc_invoke_fn *invoke_fn; | |
| size_t fifo_size; | |
| int ret; | |
| /* get SMC or HVC function */ | |
| invoke_fn = get_invoke_func(dev); | |
| if (IS_ERR(invoke_fn)) | |
| return -EINVAL; | |
| sh_memory = devm_kzalloc(dev, sizeof(*sh_memory), GFP_KERNEL); | |
| if (!sh_memory) | |
| return -ENOMEM; | |
| sh_memory->invoke_fn = invoke_fn; | |
| ret = svc_get_sh_memory(pdev, sh_memory); | |
| if (ret) | |
| return ret; | |
| genpool = svc_create_memory_pool(pdev, sh_memory); | |
| if (IS_ERR(genpool)) | |
| return PTR_ERR(genpool); | |
| /* allocate service controller and supporting channel */ | |
| controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL); | |
| if (!controller) { | |
| ret = -ENOMEM; | |
| goto err_destroy_pool; | |
| } | |
| chans = devm_kmalloc_array(dev, SVC_NUM_CHANNEL, | |
| sizeof(*chans), GFP_KERNEL | __GFP_ZERO); | |
| if (!chans) { | |
| ret = -ENOMEM; | |
| goto err_destroy_pool; | |
| } | |
| controller->dev = dev; | |
| controller->num_chans = SVC_NUM_CHANNEL; | |
| controller->num_active_client = 0; | |
| controller->chans = chans; | |
| controller->genpool = genpool; | |
| controller->task = NULL; | |
| controller->invoke_fn = invoke_fn; | |
| init_completion(&controller->complete_status); | |
| fifo_size = sizeof(struct stratix10_svc_data) * SVC_NUM_DATA_IN_FIFO; | |
| ret = kfifo_alloc(&controller->svc_fifo, fifo_size, GFP_KERNEL); | |
| if (ret) { | |
| dev_err(dev, "failed to allocate FIFO\n"); | |
| goto err_destroy_pool; | |
| } | |
| spin_lock_init(&controller->svc_fifo_lock); | |
| chans[0].scl = NULL; | |
| chans[0].ctrl = controller; | |
| chans[0].name = SVC_CLIENT_FPGA; | |
| spin_lock_init(&chans[0].lock); | |
| chans[1].scl = NULL; | |
| chans[1].ctrl = controller; | |
| chans[1].name = SVC_CLIENT_RSU; | |
| spin_lock_init(&chans[1].lock); | |
| chans[2].scl = NULL; | |
| chans[2].ctrl = controller; | |
| chans[2].name = SVC_CLIENT_FCS; | |
| spin_lock_init(&chans[2].lock); | |
| list_add_tail(&controller->node, &svc_ctrl); | |
| platform_set_drvdata(pdev, controller); | |
| /* add svc client device(s) */ | |
| svc = devm_kzalloc(dev, sizeof(*svc), GFP_KERNEL); | |
| if (!svc) { | |
| ret = -ENOMEM; | |
| goto err_free_kfifo; | |
| } | |
| svc->stratix10_svc_rsu = platform_device_alloc(STRATIX10_RSU, 0); | |
| if (!svc->stratix10_svc_rsu) { | |
| dev_err(dev, "failed to allocate %s device\n", STRATIX10_RSU); | |
| ret = -ENOMEM; | |
| goto err_free_kfifo; | |
| } | |
| ret = platform_device_add(svc->stratix10_svc_rsu); | |
| if (ret) { | |
| platform_device_put(svc->stratix10_svc_rsu); | |
| goto err_free_kfifo; | |
| } | |
| svc->intel_svc_fcs = platform_device_alloc(INTEL_FCS, 1); | |
| if (!svc->intel_svc_fcs) { | |
| dev_err(dev, "failed to allocate %s device\n", INTEL_FCS); | |
| ret = -ENOMEM; | |
| goto err_unregister_dev; | |
| } | |
| ret = platform_device_add(svc->intel_svc_fcs); | |
| if (ret) { | |
| platform_device_put(svc->intel_svc_fcs); | |
| goto err_unregister_dev; | |
| } | |
| dev_set_drvdata(dev, svc); | |
| pr_info("Intel Service Layer Driver Initialized\n"); | |
| return 0; | |
| err_unregister_dev: | |
| platform_device_unregister(svc->stratix10_svc_rsu); | |
| err_free_kfifo: | |
| kfifo_free(&controller->svc_fifo); | |
| err_destroy_pool: | |
| gen_pool_destroy(genpool); | |
| return ret; | |
| } | |
| static void stratix10_svc_drv_remove(struct platform_device *pdev) | |
| { | |
| struct stratix10_svc *svc = dev_get_drvdata(&pdev->dev); | |
| struct stratix10_svc_controller *ctrl = platform_get_drvdata(pdev); | |
| platform_device_unregister(svc->intel_svc_fcs); | |
| platform_device_unregister(svc->stratix10_svc_rsu); | |
| kfifo_free(&ctrl->svc_fifo); | |
| if (ctrl->task) { | |
| kthread_stop(ctrl->task); | |
| ctrl->task = NULL; | |
| } | |
| if (ctrl->genpool) | |
| gen_pool_destroy(ctrl->genpool); | |
| list_del(&ctrl->node); | |
| } | |
| static struct platform_driver stratix10_svc_driver = { | |
| .probe = stratix10_svc_drv_probe, | |
| .remove_new = stratix10_svc_drv_remove, | |
| .driver = { | |
| .name = "stratix10-svc", | |
| .of_match_table = stratix10_svc_drv_match, | |
| }, | |
| }; | |
| static int __init stratix10_svc_init(void) | |
| { | |
| struct device_node *fw_np; | |
| struct device_node *np; | |
| int ret; | |
| fw_np = of_find_node_by_name(NULL, "firmware"); | |
| if (!fw_np) | |
| return -ENODEV; | |
| np = of_find_matching_node(fw_np, stratix10_svc_drv_match); | |
| if (!np) | |
| return -ENODEV; | |
| of_node_put(np); | |
| ret = of_platform_populate(fw_np, stratix10_svc_drv_match, NULL, NULL); | |
| if (ret) | |
| return ret; | |
| return platform_driver_register(&stratix10_svc_driver); | |
| } | |
| static void __exit stratix10_svc_exit(void) | |
| { | |
| return platform_driver_unregister(&stratix10_svc_driver); | |
| } | |
| subsys_initcall(stratix10_svc_init); | |
| module_exit(stratix10_svc_exit); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_DESCRIPTION("Intel Stratix10 Service Layer Driver"); | |
| MODULE_AUTHOR("Richard Gong <richard.gong@intel.com>"); | |
| MODULE_ALIAS("platform:stratix10-svc"); |