| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * raid1.c : Multiple Devices driver for Linux | |
| * | |
| * Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat | |
| * | |
| * Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman | |
| * | |
| * RAID-1 management functions. | |
| * | |
| * Better read-balancing code written by Mika Kuoppala <miku@iki.fi>, 2000 | |
| * | |
| * Fixes to reconstruction by Jakob Østergaard" <jakob@ostenfeld.dk> | |
| * Various fixes by Neil Brown <neilb@cse.unsw.edu.au> | |
| * | |
| * Changes by Peter T. Breuer <ptb@it.uc3m.es> 31/1/2003 to support | |
| * bitmapped intelligence in resync: | |
| * | |
| * - bitmap marked during normal i/o | |
| * - bitmap used to skip nondirty blocks during sync | |
| * | |
| * Additions to bitmap code, (C) 2003-2004 Paul Clements, SteelEye Technology: | |
| * - persistent bitmap code | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/module.h> | |
| #include <linux/seq_file.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/interval_tree_generic.h> | |
| #include <trace/events/block.h> | |
| #include "md.h" | |
| #include "raid1.h" | |
| #include "md-bitmap.h" | |
| #define UNSUPPORTED_MDDEV_FLAGS \ | |
| ((1L << MD_HAS_JOURNAL) | \ | |
| (1L << MD_JOURNAL_CLEAN) | \ | |
| (1L << MD_HAS_PPL) | \ | |
| (1L << MD_HAS_MULTIPLE_PPLS)) | |
| static void allow_barrier(struct r1conf *conf, sector_t sector_nr); | |
| static void lower_barrier(struct r1conf *conf, sector_t sector_nr); | |
| #define raid1_log(md, fmt, args...) \ | |
| do { if ((md)->queue) blk_add_trace_msg((md)->queue, "raid1 " fmt, ##args); } while (0) | |
| #define RAID_1_10_NAME "raid1" | |
| #include "raid1-10.c" | |
| #define START(node) ((node)->start) | |
| #define LAST(node) ((node)->last) | |
| INTERVAL_TREE_DEFINE(struct serial_info, node, sector_t, _subtree_last, | |
| START, LAST, static inline, raid1_rb); | |
| static int check_and_add_serial(struct md_rdev *rdev, struct r1bio *r1_bio, | |
| struct serial_info *si, int idx) | |
| { | |
| unsigned long flags; | |
| int ret = 0; | |
| sector_t lo = r1_bio->sector; | |
| sector_t hi = lo + r1_bio->sectors; | |
| struct serial_in_rdev *serial = &rdev->serial[idx]; | |
| spin_lock_irqsave(&serial->serial_lock, flags); | |
| /* collision happened */ | |
| if (raid1_rb_iter_first(&serial->serial_rb, lo, hi)) | |
| ret = -EBUSY; | |
| else { | |
| si->start = lo; | |
| si->last = hi; | |
| raid1_rb_insert(si, &serial->serial_rb); | |
| } | |
| spin_unlock_irqrestore(&serial->serial_lock, flags); | |
| return ret; | |
| } | |
| static void wait_for_serialization(struct md_rdev *rdev, struct r1bio *r1_bio) | |
| { | |
| struct mddev *mddev = rdev->mddev; | |
| struct serial_info *si; | |
| int idx = sector_to_idx(r1_bio->sector); | |
| struct serial_in_rdev *serial = &rdev->serial[idx]; | |
| if (WARN_ON(!mddev->serial_info_pool)) | |
| return; | |
| si = mempool_alloc(mddev->serial_info_pool, GFP_NOIO); | |
| wait_event(serial->serial_io_wait, | |
| check_and_add_serial(rdev, r1_bio, si, idx) == 0); | |
| } | |
| static void remove_serial(struct md_rdev *rdev, sector_t lo, sector_t hi) | |
| { | |
| struct serial_info *si; | |
| unsigned long flags; | |
| int found = 0; | |
| struct mddev *mddev = rdev->mddev; | |
| int idx = sector_to_idx(lo); | |
| struct serial_in_rdev *serial = &rdev->serial[idx]; | |
| spin_lock_irqsave(&serial->serial_lock, flags); | |
| for (si = raid1_rb_iter_first(&serial->serial_rb, lo, hi); | |
| si; si = raid1_rb_iter_next(si, lo, hi)) { | |
| if (si->start == lo && si->last == hi) { | |
| raid1_rb_remove(si, &serial->serial_rb); | |
| mempool_free(si, mddev->serial_info_pool); | |
| found = 1; | |
| break; | |
| } | |
| } | |
| if (!found) | |
| WARN(1, "The write IO is not recorded for serialization\n"); | |
| spin_unlock_irqrestore(&serial->serial_lock, flags); | |
| wake_up(&serial->serial_io_wait); | |
| } | |
| /* | |
| * for resync bio, r1bio pointer can be retrieved from the per-bio | |
| * 'struct resync_pages'. | |
| */ | |
| static inline struct r1bio *get_resync_r1bio(struct bio *bio) | |
| { | |
| return get_resync_pages(bio)->raid_bio; | |
| } | |
| static void * r1bio_pool_alloc(gfp_t gfp_flags, void *data) | |
| { | |
| struct pool_info *pi = data; | |
| int size = offsetof(struct r1bio, bios[pi->raid_disks]); | |
| /* allocate a r1bio with room for raid_disks entries in the bios array */ | |
| return kzalloc(size, gfp_flags); | |
| } | |
| #define RESYNC_DEPTH 32 | |
| #define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9) | |
| #define RESYNC_WINDOW (RESYNC_BLOCK_SIZE * RESYNC_DEPTH) | |
| #define RESYNC_WINDOW_SECTORS (RESYNC_WINDOW >> 9) | |
| #define CLUSTER_RESYNC_WINDOW (16 * RESYNC_WINDOW) | |
| #define CLUSTER_RESYNC_WINDOW_SECTORS (CLUSTER_RESYNC_WINDOW >> 9) | |
| static void * r1buf_pool_alloc(gfp_t gfp_flags, void *data) | |
| { | |
| struct pool_info *pi = data; | |
| struct r1bio *r1_bio; | |
| struct bio *bio; | |
| int need_pages; | |
| int j; | |
| struct resync_pages *rps; | |
| r1_bio = r1bio_pool_alloc(gfp_flags, pi); | |
| if (!r1_bio) | |
| return NULL; | |
| rps = kmalloc_array(pi->raid_disks, sizeof(struct resync_pages), | |
| gfp_flags); | |
| if (!rps) | |
| goto out_free_r1bio; | |
| /* | |
| * Allocate bios : 1 for reading, n-1 for writing | |
| */ | |
| for (j = pi->raid_disks ; j-- ; ) { | |
| bio = bio_kmalloc(RESYNC_PAGES, gfp_flags); | |
| if (!bio) | |
| goto out_free_bio; | |
| bio_init(bio, NULL, bio->bi_inline_vecs, RESYNC_PAGES, 0); | |
| r1_bio->bios[j] = bio; | |
| } | |
| /* | |
| * Allocate RESYNC_PAGES data pages and attach them to | |
| * the first bio. | |
| * If this is a user-requested check/repair, allocate | |
| * RESYNC_PAGES for each bio. | |
| */ | |
| if (test_bit(MD_RECOVERY_REQUESTED, &pi->mddev->recovery)) | |
| need_pages = pi->raid_disks; | |
| else | |
| need_pages = 1; | |
| for (j = 0; j < pi->raid_disks; j++) { | |
| struct resync_pages *rp = &rps[j]; | |
| bio = r1_bio->bios[j]; | |
| if (j < need_pages) { | |
| if (resync_alloc_pages(rp, gfp_flags)) | |
| goto out_free_pages; | |
| } else { | |
| memcpy(rp, &rps[0], sizeof(*rp)); | |
| resync_get_all_pages(rp); | |
| } | |
| rp->raid_bio = r1_bio; | |
| bio->bi_private = rp; | |
| } | |
| r1_bio->master_bio = NULL; | |
| return r1_bio; | |
| out_free_pages: | |
| while (--j >= 0) | |
| resync_free_pages(&rps[j]); | |
| out_free_bio: | |
| while (++j < pi->raid_disks) { | |
| bio_uninit(r1_bio->bios[j]); | |
| kfree(r1_bio->bios[j]); | |
| } | |
| kfree(rps); | |
| out_free_r1bio: | |
| rbio_pool_free(r1_bio, data); | |
| return NULL; | |
| } | |
| static void r1buf_pool_free(void *__r1_bio, void *data) | |
| { | |
| struct pool_info *pi = data; | |
| int i; | |
| struct r1bio *r1bio = __r1_bio; | |
| struct resync_pages *rp = NULL; | |
| for (i = pi->raid_disks; i--; ) { | |
| rp = get_resync_pages(r1bio->bios[i]); | |
| resync_free_pages(rp); | |
| bio_uninit(r1bio->bios[i]); | |
| kfree(r1bio->bios[i]); | |
| } | |
| /* resync pages array stored in the 1st bio's .bi_private */ | |
| kfree(rp); | |
| rbio_pool_free(r1bio, data); | |
| } | |
| static void put_all_bios(struct r1conf *conf, struct r1bio *r1_bio) | |
| { | |
| int i; | |
| for (i = 0; i < conf->raid_disks * 2; i++) { | |
| struct bio **bio = r1_bio->bios + i; | |
| if (!BIO_SPECIAL(*bio)) | |
| bio_put(*bio); | |
| *bio = NULL; | |
| } | |
| } | |
| static void free_r1bio(struct r1bio *r1_bio) | |
| { | |
| struct r1conf *conf = r1_bio->mddev->private; | |
| put_all_bios(conf, r1_bio); | |
| mempool_free(r1_bio, &conf->r1bio_pool); | |
| } | |
| static void put_buf(struct r1bio *r1_bio) | |
| { | |
| struct r1conf *conf = r1_bio->mddev->private; | |
| sector_t sect = r1_bio->sector; | |
| int i; | |
| for (i = 0; i < conf->raid_disks * 2; i++) { | |
| struct bio *bio = r1_bio->bios[i]; | |
| if (bio->bi_end_io) | |
| rdev_dec_pending(conf->mirrors[i].rdev, r1_bio->mddev); | |
| } | |
| mempool_free(r1_bio, &conf->r1buf_pool); | |
| lower_barrier(conf, sect); | |
| } | |
| static void reschedule_retry(struct r1bio *r1_bio) | |
| { | |
| unsigned long flags; | |
| struct mddev *mddev = r1_bio->mddev; | |
| struct r1conf *conf = mddev->private; | |
| int idx; | |
| idx = sector_to_idx(r1_bio->sector); | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| list_add(&r1_bio->retry_list, &conf->retry_list); | |
| atomic_inc(&conf->nr_queued[idx]); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| wake_up(&conf->wait_barrier); | |
| md_wakeup_thread(mddev->thread); | |
| } | |
| /* | |
| * raid_end_bio_io() is called when we have finished servicing a mirrored | |
| * operation and are ready to return a success/failure code to the buffer | |
| * cache layer. | |
| */ | |
| static void call_bio_endio(struct r1bio *r1_bio) | |
| { | |
| struct bio *bio = r1_bio->master_bio; | |
| if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) | |
| bio->bi_status = BLK_STS_IOERR; | |
| bio_endio(bio); | |
| } | |
| static void raid_end_bio_io(struct r1bio *r1_bio) | |
| { | |
| struct bio *bio = r1_bio->master_bio; | |
| struct r1conf *conf = r1_bio->mddev->private; | |
| sector_t sector = r1_bio->sector; | |
| /* if nobody has done the final endio yet, do it now */ | |
| if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { | |
| pr_debug("raid1: sync end %s on sectors %llu-%llu\n", | |
| (bio_data_dir(bio) == WRITE) ? "write" : "read", | |
| (unsigned long long) bio->bi_iter.bi_sector, | |
| (unsigned long long) bio_end_sector(bio) - 1); | |
| call_bio_endio(r1_bio); | |
| } | |
| free_r1bio(r1_bio); | |
| /* | |
| * Wake up any possible resync thread that waits for the device | |
| * to go idle. All I/Os, even write-behind writes, are done. | |
| */ | |
| allow_barrier(conf, sector); | |
| } | |
| /* | |
| * Update disk head position estimator based on IRQ completion info. | |
| */ | |
| static inline void update_head_pos(int disk, struct r1bio *r1_bio) | |
| { | |
| struct r1conf *conf = r1_bio->mddev->private; | |
| conf->mirrors[disk].head_position = | |
| r1_bio->sector + (r1_bio->sectors); | |
| } | |
| /* | |
| * Find the disk number which triggered given bio | |
| */ | |
| static int find_bio_disk(struct r1bio *r1_bio, struct bio *bio) | |
| { | |
| int mirror; | |
| struct r1conf *conf = r1_bio->mddev->private; | |
| int raid_disks = conf->raid_disks; | |
| for (mirror = 0; mirror < raid_disks * 2; mirror++) | |
| if (r1_bio->bios[mirror] == bio) | |
| break; | |
| BUG_ON(mirror == raid_disks * 2); | |
| update_head_pos(mirror, r1_bio); | |
| return mirror; | |
| } | |
| static void raid1_end_read_request(struct bio *bio) | |
| { | |
| int uptodate = !bio->bi_status; | |
| struct r1bio *r1_bio = bio->bi_private; | |
| struct r1conf *conf = r1_bio->mddev->private; | |
| struct md_rdev *rdev = conf->mirrors[r1_bio->read_disk].rdev; | |
| /* | |
| * this branch is our 'one mirror IO has finished' event handler: | |
| */ | |
| update_head_pos(r1_bio->read_disk, r1_bio); | |
| if (uptodate) | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| else if (test_bit(FailFast, &rdev->flags) && | |
| test_bit(R1BIO_FailFast, &r1_bio->state)) | |
| /* This was a fail-fast read so we definitely | |
| * want to retry */ | |
| ; | |
| else { | |
| /* If all other devices have failed, we want to return | |
| * the error upwards rather than fail the last device. | |
| * Here we redefine "uptodate" to mean "Don't want to retry" | |
| */ | |
| unsigned long flags; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| if (r1_bio->mddev->degraded == conf->raid_disks || | |
| (r1_bio->mddev->degraded == conf->raid_disks-1 && | |
| test_bit(In_sync, &rdev->flags))) | |
| uptodate = 1; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| } | |
| if (uptodate) { | |
| raid_end_bio_io(r1_bio); | |
| rdev_dec_pending(rdev, conf->mddev); | |
| } else { | |
| /* | |
| * oops, read error: | |
| */ | |
| pr_err_ratelimited("md/raid1:%s: %pg: rescheduling sector %llu\n", | |
| mdname(conf->mddev), | |
| rdev->bdev, | |
| (unsigned long long)r1_bio->sector); | |
| set_bit(R1BIO_ReadError, &r1_bio->state); | |
| reschedule_retry(r1_bio); | |
| /* don't drop the reference on read_disk yet */ | |
| } | |
| } | |
| static void close_write(struct r1bio *r1_bio) | |
| { | |
| /* it really is the end of this request */ | |
| if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { | |
| bio_free_pages(r1_bio->behind_master_bio); | |
| bio_put(r1_bio->behind_master_bio); | |
| r1_bio->behind_master_bio = NULL; | |
| } | |
| /* clear the bitmap if all writes complete successfully */ | |
| md_bitmap_endwrite(r1_bio->mddev->bitmap, r1_bio->sector, | |
| r1_bio->sectors, | |
| !test_bit(R1BIO_Degraded, &r1_bio->state), | |
| test_bit(R1BIO_BehindIO, &r1_bio->state)); | |
| md_write_end(r1_bio->mddev); | |
| } | |
| static void r1_bio_write_done(struct r1bio *r1_bio) | |
| { | |
| if (!atomic_dec_and_test(&r1_bio->remaining)) | |
| return; | |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| reschedule_retry(r1_bio); | |
| else { | |
| close_write(r1_bio); | |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state)) | |
| reschedule_retry(r1_bio); | |
| else | |
| raid_end_bio_io(r1_bio); | |
| } | |
| } | |
| static void raid1_end_write_request(struct bio *bio) | |
| { | |
| struct r1bio *r1_bio = bio->bi_private; | |
| int behind = test_bit(R1BIO_BehindIO, &r1_bio->state); | |
| struct r1conf *conf = r1_bio->mddev->private; | |
| struct bio *to_put = NULL; | |
| int mirror = find_bio_disk(r1_bio, bio); | |
| struct md_rdev *rdev = conf->mirrors[mirror].rdev; | |
| bool discard_error; | |
| sector_t lo = r1_bio->sector; | |
| sector_t hi = r1_bio->sector + r1_bio->sectors; | |
| discard_error = bio->bi_status && bio_op(bio) == REQ_OP_DISCARD; | |
| /* | |
| * 'one mirror IO has finished' event handler: | |
| */ | |
| if (bio->bi_status && !discard_error) { | |
| set_bit(WriteErrorSeen, &rdev->flags); | |
| if (!test_and_set_bit(WantReplacement, &rdev->flags)) | |
| set_bit(MD_RECOVERY_NEEDED, & | |
| conf->mddev->recovery); | |
| if (test_bit(FailFast, &rdev->flags) && | |
| (bio->bi_opf & MD_FAILFAST) && | |
| /* We never try FailFast to WriteMostly devices */ | |
| !test_bit(WriteMostly, &rdev->flags)) { | |
| md_error(r1_bio->mddev, rdev); | |
| } | |
| /* | |
| * When the device is faulty, it is not necessary to | |
| * handle write error. | |
| */ | |
| if (!test_bit(Faulty, &rdev->flags)) | |
| set_bit(R1BIO_WriteError, &r1_bio->state); | |
| else { | |
| /* Fail the request */ | |
| set_bit(R1BIO_Degraded, &r1_bio->state); | |
| /* Finished with this branch */ | |
| r1_bio->bios[mirror] = NULL; | |
| to_put = bio; | |
| } | |
| } else { | |
| /* | |
| * Set R1BIO_Uptodate in our master bio, so that we | |
| * will return a good error code for to the higher | |
| * levels even if IO on some other mirrored buffer | |
| * fails. | |
| * | |
| * The 'master' represents the composite IO operation | |
| * to user-side. So if something waits for IO, then it | |
| * will wait for the 'master' bio. | |
| */ | |
| sector_t first_bad; | |
| int bad_sectors; | |
| r1_bio->bios[mirror] = NULL; | |
| to_put = bio; | |
| /* | |
| * Do not set R1BIO_Uptodate if the current device is | |
| * rebuilding or Faulty. This is because we cannot use | |
| * such device for properly reading the data back (we could | |
| * potentially use it, if the current write would have felt | |
| * before rdev->recovery_offset, but for simplicity we don't | |
| * check this here. | |
| */ | |
| if (test_bit(In_sync, &rdev->flags) && | |
| !test_bit(Faulty, &rdev->flags)) | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| /* Maybe we can clear some bad blocks. */ | |
| if (is_badblock(rdev, r1_bio->sector, r1_bio->sectors, | |
| &first_bad, &bad_sectors) && !discard_error) { | |
| r1_bio->bios[mirror] = IO_MADE_GOOD; | |
| set_bit(R1BIO_MadeGood, &r1_bio->state); | |
| } | |
| } | |
| if (behind) { | |
| if (test_bit(CollisionCheck, &rdev->flags)) | |
| remove_serial(rdev, lo, hi); | |
| if (test_bit(WriteMostly, &rdev->flags)) | |
| atomic_dec(&r1_bio->behind_remaining); | |
| /* | |
| * In behind mode, we ACK the master bio once the I/O | |
| * has safely reached all non-writemostly | |
| * disks. Setting the Returned bit ensures that this | |
| * gets done only once -- we don't ever want to return | |
| * -EIO here, instead we'll wait | |
| */ | |
| if (atomic_read(&r1_bio->behind_remaining) >= (atomic_read(&r1_bio->remaining)-1) && | |
| test_bit(R1BIO_Uptodate, &r1_bio->state)) { | |
| /* Maybe we can return now */ | |
| if (!test_and_set_bit(R1BIO_Returned, &r1_bio->state)) { | |
| struct bio *mbio = r1_bio->master_bio; | |
| pr_debug("raid1: behind end write sectors" | |
| " %llu-%llu\n", | |
| (unsigned long long) mbio->bi_iter.bi_sector, | |
| (unsigned long long) bio_end_sector(mbio) - 1); | |
| call_bio_endio(r1_bio); | |
| } | |
| } | |
| } else if (rdev->mddev->serialize_policy) | |
| remove_serial(rdev, lo, hi); | |
| if (r1_bio->bios[mirror] == NULL) | |
| rdev_dec_pending(rdev, conf->mddev); | |
| /* | |
| * Let's see if all mirrored write operations have finished | |
| * already. | |
| */ | |
| r1_bio_write_done(r1_bio); | |
| if (to_put) | |
| bio_put(to_put); | |
| } | |
| static sector_t align_to_barrier_unit_end(sector_t start_sector, | |
| sector_t sectors) | |
| { | |
| sector_t len; | |
| WARN_ON(sectors == 0); | |
| /* | |
| * len is the number of sectors from start_sector to end of the | |
| * barrier unit which start_sector belongs to. | |
| */ | |
| len = round_up(start_sector + 1, BARRIER_UNIT_SECTOR_SIZE) - | |
| start_sector; | |
| if (len > sectors) | |
| len = sectors; | |
| return len; | |
| } | |
| /* | |
| * This routine returns the disk from which the requested read should | |
| * be done. There is a per-array 'next expected sequential IO' sector | |
| * number - if this matches on the next IO then we use the last disk. | |
| * There is also a per-disk 'last know head position' sector that is | |
| * maintained from IRQ contexts, both the normal and the resync IO | |
| * completion handlers update this position correctly. If there is no | |
| * perfect sequential match then we pick the disk whose head is closest. | |
| * | |
| * If there are 2 mirrors in the same 2 devices, performance degrades | |
| * because position is mirror, not device based. | |
| * | |
| * The rdev for the device selected will have nr_pending incremented. | |
| */ | |
| static int read_balance(struct r1conf *conf, struct r1bio *r1_bio, int *max_sectors) | |
| { | |
| const sector_t this_sector = r1_bio->sector; | |
| int sectors; | |
| int best_good_sectors; | |
| int best_disk, best_dist_disk, best_pending_disk; | |
| int has_nonrot_disk; | |
| int disk; | |
| sector_t best_dist; | |
| unsigned int min_pending; | |
| struct md_rdev *rdev; | |
| int choose_first; | |
| int choose_next_idle; | |
| /* | |
| * Check if we can balance. We can balance on the whole | |
| * device if no resync is going on, or below the resync window. | |
| * We take the first readable disk when above the resync window. | |
| */ | |
| retry: | |
| sectors = r1_bio->sectors; | |
| best_disk = -1; | |
| best_dist_disk = -1; | |
| best_dist = MaxSector; | |
| best_pending_disk = -1; | |
| min_pending = UINT_MAX; | |
| best_good_sectors = 0; | |
| has_nonrot_disk = 0; | |
| choose_next_idle = 0; | |
| clear_bit(R1BIO_FailFast, &r1_bio->state); | |
| if ((conf->mddev->recovery_cp < this_sector + sectors) || | |
| (mddev_is_clustered(conf->mddev) && | |
| md_cluster_ops->area_resyncing(conf->mddev, READ, this_sector, | |
| this_sector + sectors))) | |
| choose_first = 1; | |
| else | |
| choose_first = 0; | |
| for (disk = 0 ; disk < conf->raid_disks * 2 ; disk++) { | |
| sector_t dist; | |
| sector_t first_bad; | |
| int bad_sectors; | |
| unsigned int pending; | |
| bool nonrot; | |
| rdev = conf->mirrors[disk].rdev; | |
| if (r1_bio->bios[disk] == IO_BLOCKED | |
| || rdev == NULL | |
| || test_bit(Faulty, &rdev->flags)) | |
| continue; | |
| if (!test_bit(In_sync, &rdev->flags) && | |
| rdev->recovery_offset < this_sector + sectors) | |
| continue; | |
| if (test_bit(WriteMostly, &rdev->flags)) { | |
| /* Don't balance among write-mostly, just | |
| * use the first as a last resort */ | |
| if (best_dist_disk < 0) { | |
| if (is_badblock(rdev, this_sector, sectors, | |
| &first_bad, &bad_sectors)) { | |
| if (first_bad <= this_sector) | |
| /* Cannot use this */ | |
| continue; | |
| best_good_sectors = first_bad - this_sector; | |
| } else | |
| best_good_sectors = sectors; | |
| best_dist_disk = disk; | |
| best_pending_disk = disk; | |
| } | |
| continue; | |
| } | |
| /* This is a reasonable device to use. It might | |
| * even be best. | |
| */ | |
| if (is_badblock(rdev, this_sector, sectors, | |
| &first_bad, &bad_sectors)) { | |
| if (best_dist < MaxSector) | |
| /* already have a better device */ | |
| continue; | |
| if (first_bad <= this_sector) { | |
| /* cannot read here. If this is the 'primary' | |
| * device, then we must not read beyond | |
| * bad_sectors from another device.. | |
| */ | |
| bad_sectors -= (this_sector - first_bad); | |
| if (choose_first && sectors > bad_sectors) | |
| sectors = bad_sectors; | |
| if (best_good_sectors > sectors) | |
| best_good_sectors = sectors; | |
| } else { | |
| sector_t good_sectors = first_bad - this_sector; | |
| if (good_sectors > best_good_sectors) { | |
| best_good_sectors = good_sectors; | |
| best_disk = disk; | |
| } | |
| if (choose_first) | |
| break; | |
| } | |
| continue; | |
| } else { | |
| if ((sectors > best_good_sectors) && (best_disk >= 0)) | |
| best_disk = -1; | |
| best_good_sectors = sectors; | |
| } | |
| if (best_disk >= 0) | |
| /* At least two disks to choose from so failfast is OK */ | |
| set_bit(R1BIO_FailFast, &r1_bio->state); | |
| nonrot = bdev_nonrot(rdev->bdev); | |
| has_nonrot_disk |= nonrot; | |
| pending = atomic_read(&rdev->nr_pending); | |
| dist = abs(this_sector - conf->mirrors[disk].head_position); | |
| if (choose_first) { | |
| best_disk = disk; | |
| break; | |
| } | |
| /* Don't change to another disk for sequential reads */ | |
| if (conf->mirrors[disk].next_seq_sect == this_sector | |
| || dist == 0) { | |
| int opt_iosize = bdev_io_opt(rdev->bdev) >> 9; | |
| struct raid1_info *mirror = &conf->mirrors[disk]; | |
| best_disk = disk; | |
| /* | |
| * If buffered sequential IO size exceeds optimal | |
| * iosize, check if there is idle disk. If yes, choose | |
| * the idle disk. read_balance could already choose an | |
| * idle disk before noticing it's a sequential IO in | |
| * this disk. This doesn't matter because this disk | |
| * will idle, next time it will be utilized after the | |
| * first disk has IO size exceeds optimal iosize. In | |
| * this way, iosize of the first disk will be optimal | |
| * iosize at least. iosize of the second disk might be | |
| * small, but not a big deal since when the second disk | |
| * starts IO, the first disk is likely still busy. | |
| */ | |
| if (nonrot && opt_iosize > 0 && | |
| mirror->seq_start != MaxSector && | |
| mirror->next_seq_sect > opt_iosize && | |
| mirror->next_seq_sect - opt_iosize >= | |
| mirror->seq_start) { | |
| choose_next_idle = 1; | |
| continue; | |
| } | |
| break; | |
| } | |
| if (choose_next_idle) | |
| continue; | |
| if (min_pending > pending) { | |
| min_pending = pending; | |
| best_pending_disk = disk; | |
| } | |
| if (dist < best_dist) { | |
| best_dist = dist; | |
| best_dist_disk = disk; | |
| } | |
| } | |
| /* | |
| * If all disks are rotational, choose the closest disk. If any disk is | |
| * non-rotational, choose the disk with less pending request even the | |
| * disk is rotational, which might/might not be optimal for raids with | |
| * mixed ratation/non-rotational disks depending on workload. | |
| */ | |
| if (best_disk == -1) { | |
| if (has_nonrot_disk || min_pending == 0) | |
| best_disk = best_pending_disk; | |
| else | |
| best_disk = best_dist_disk; | |
| } | |
| if (best_disk >= 0) { | |
| rdev = conf->mirrors[best_disk].rdev; | |
| if (!rdev) | |
| goto retry; | |
| atomic_inc(&rdev->nr_pending); | |
| sectors = best_good_sectors; | |
| if (conf->mirrors[best_disk].next_seq_sect != this_sector) | |
| conf->mirrors[best_disk].seq_start = this_sector; | |
| conf->mirrors[best_disk].next_seq_sect = this_sector + sectors; | |
| } | |
| *max_sectors = sectors; | |
| return best_disk; | |
| } | |
| static void wake_up_barrier(struct r1conf *conf) | |
| { | |
| if (wq_has_sleeper(&conf->wait_barrier)) | |
| wake_up(&conf->wait_barrier); | |
| } | |
| static void flush_bio_list(struct r1conf *conf, struct bio *bio) | |
| { | |
| /* flush any pending bitmap writes to disk before proceeding w/ I/O */ | |
| raid1_prepare_flush_writes(conf->mddev->bitmap); | |
| wake_up_barrier(conf); | |
| while (bio) { /* submit pending writes */ | |
| struct bio *next = bio->bi_next; | |
| raid1_submit_write(bio); | |
| bio = next; | |
| cond_resched(); | |
| } | |
| } | |
| static void flush_pending_writes(struct r1conf *conf) | |
| { | |
| /* Any writes that have been queued but are awaiting | |
| * bitmap updates get flushed here. | |
| */ | |
| spin_lock_irq(&conf->device_lock); | |
| if (conf->pending_bio_list.head) { | |
| struct blk_plug plug; | |
| struct bio *bio; | |
| bio = bio_list_get(&conf->pending_bio_list); | |
| spin_unlock_irq(&conf->device_lock); | |
| /* | |
| * As this is called in a wait_event() loop (see freeze_array), | |
| * current->state might be TASK_UNINTERRUPTIBLE which will | |
| * cause a warning when we prepare to wait again. As it is | |
| * rare that this path is taken, it is perfectly safe to force | |
| * us to go around the wait_event() loop again, so the warning | |
| * is a false-positive. Silence the warning by resetting | |
| * thread state | |
| */ | |
| __set_current_state(TASK_RUNNING); | |
| blk_start_plug(&plug); | |
| flush_bio_list(conf, bio); | |
| blk_finish_plug(&plug); | |
| } else | |
| spin_unlock_irq(&conf->device_lock); | |
| } | |
| /* Barriers.... | |
| * Sometimes we need to suspend IO while we do something else, | |
| * either some resync/recovery, or reconfigure the array. | |
| * To do this we raise a 'barrier'. | |
| * The 'barrier' is a counter that can be raised multiple times | |
| * to count how many activities are happening which preclude | |
| * normal IO. | |
| * We can only raise the barrier if there is no pending IO. | |
| * i.e. if nr_pending == 0. | |
| * We choose only to raise the barrier if no-one is waiting for the | |
| * barrier to go down. This means that as soon as an IO request | |
| * is ready, no other operations which require a barrier will start | |
| * until the IO request has had a chance. | |
| * | |
| * So: regular IO calls 'wait_barrier'. When that returns there | |
| * is no backgroup IO happening, It must arrange to call | |
| * allow_barrier when it has finished its IO. | |
| * backgroup IO calls must call raise_barrier. Once that returns | |
| * there is no normal IO happeing. It must arrange to call | |
| * lower_barrier when the particular background IO completes. | |
| * | |
| * If resync/recovery is interrupted, returns -EINTR; | |
| * Otherwise, returns 0. | |
| */ | |
| static int raise_barrier(struct r1conf *conf, sector_t sector_nr) | |
| { | |
| int idx = sector_to_idx(sector_nr); | |
| spin_lock_irq(&conf->resync_lock); | |
| /* Wait until no block IO is waiting */ | |
| wait_event_lock_irq(conf->wait_barrier, | |
| !atomic_read(&conf->nr_waiting[idx]), | |
| conf->resync_lock); | |
| /* block any new IO from starting */ | |
| atomic_inc(&conf->barrier[idx]); | |
| /* | |
| * In raise_barrier() we firstly increase conf->barrier[idx] then | |
| * check conf->nr_pending[idx]. In _wait_barrier() we firstly | |
| * increase conf->nr_pending[idx] then check conf->barrier[idx]. | |
| * A memory barrier here to make sure conf->nr_pending[idx] won't | |
| * be fetched before conf->barrier[idx] is increased. Otherwise | |
| * there will be a race between raise_barrier() and _wait_barrier(). | |
| */ | |
| smp_mb__after_atomic(); | |
| /* For these conditions we must wait: | |
| * A: while the array is in frozen state | |
| * B: while conf->nr_pending[idx] is not 0, meaning regular I/O | |
| * existing in corresponding I/O barrier bucket. | |
| * C: while conf->barrier[idx] >= RESYNC_DEPTH, meaning reaches | |
| * max resync count which allowed on current I/O barrier bucket. | |
| */ | |
| wait_event_lock_irq(conf->wait_barrier, | |
| (!conf->array_frozen && | |
| !atomic_read(&conf->nr_pending[idx]) && | |
| atomic_read(&conf->barrier[idx]) < RESYNC_DEPTH) || | |
| test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery), | |
| conf->resync_lock); | |
| if (test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) { | |
| atomic_dec(&conf->barrier[idx]); | |
| spin_unlock_irq(&conf->resync_lock); | |
| wake_up(&conf->wait_barrier); | |
| return -EINTR; | |
| } | |
| atomic_inc(&conf->nr_sync_pending); | |
| spin_unlock_irq(&conf->resync_lock); | |
| return 0; | |
| } | |
| static void lower_barrier(struct r1conf *conf, sector_t sector_nr) | |
| { | |
| int idx = sector_to_idx(sector_nr); | |
| BUG_ON(atomic_read(&conf->barrier[idx]) <= 0); | |
| atomic_dec(&conf->barrier[idx]); | |
| atomic_dec(&conf->nr_sync_pending); | |
| wake_up(&conf->wait_barrier); | |
| } | |
| static bool _wait_barrier(struct r1conf *conf, int idx, bool nowait) | |
| { | |
| bool ret = true; | |
| /* | |
| * We need to increase conf->nr_pending[idx] very early here, | |
| * then raise_barrier() can be blocked when it waits for | |
| * conf->nr_pending[idx] to be 0. Then we can avoid holding | |
| * conf->resync_lock when there is no barrier raised in same | |
| * barrier unit bucket. Also if the array is frozen, I/O | |
| * should be blocked until array is unfrozen. | |
| */ | |
| atomic_inc(&conf->nr_pending[idx]); | |
| /* | |
| * In _wait_barrier() we firstly increase conf->nr_pending[idx], then | |
| * check conf->barrier[idx]. In raise_barrier() we firstly increase | |
| * conf->barrier[idx], then check conf->nr_pending[idx]. A memory | |
| * barrier is necessary here to make sure conf->barrier[idx] won't be | |
| * fetched before conf->nr_pending[idx] is increased. Otherwise there | |
| * will be a race between _wait_barrier() and raise_barrier(). | |
| */ | |
| smp_mb__after_atomic(); | |
| /* | |
| * Don't worry about checking two atomic_t variables at same time | |
| * here. If during we check conf->barrier[idx], the array is | |
| * frozen (conf->array_frozen is 1), and chonf->barrier[idx] is | |
| * 0, it is safe to return and make the I/O continue. Because the | |
| * array is frozen, all I/O returned here will eventually complete | |
| * or be queued, no race will happen. See code comment in | |
| * frozen_array(). | |
| */ | |
| if (!READ_ONCE(conf->array_frozen) && | |
| !atomic_read(&conf->barrier[idx])) | |
| return ret; | |
| /* | |
| * After holding conf->resync_lock, conf->nr_pending[idx] | |
| * should be decreased before waiting for barrier to drop. | |
| * Otherwise, we may encounter a race condition because | |
| * raise_barrer() might be waiting for conf->nr_pending[idx] | |
| * to be 0 at same time. | |
| */ | |
| spin_lock_irq(&conf->resync_lock); | |
| atomic_inc(&conf->nr_waiting[idx]); | |
| atomic_dec(&conf->nr_pending[idx]); | |
| /* | |
| * In case freeze_array() is waiting for | |
| * get_unqueued_pending() == extra | |
| */ | |
| wake_up_barrier(conf); | |
| /* Wait for the barrier in same barrier unit bucket to drop. */ | |
| /* Return false when nowait flag is set */ | |
| if (nowait) { | |
| ret = false; | |
| } else { | |
| wait_event_lock_irq(conf->wait_barrier, | |
| !conf->array_frozen && | |
| !atomic_read(&conf->barrier[idx]), | |
| conf->resync_lock); | |
| atomic_inc(&conf->nr_pending[idx]); | |
| } | |
| atomic_dec(&conf->nr_waiting[idx]); | |
| spin_unlock_irq(&conf->resync_lock); | |
| return ret; | |
| } | |
| static bool wait_read_barrier(struct r1conf *conf, sector_t sector_nr, bool nowait) | |
| { | |
| int idx = sector_to_idx(sector_nr); | |
| bool ret = true; | |
| /* | |
| * Very similar to _wait_barrier(). The difference is, for read | |
| * I/O we don't need wait for sync I/O, but if the whole array | |
| * is frozen, the read I/O still has to wait until the array is | |
| * unfrozen. Since there is no ordering requirement with | |
| * conf->barrier[idx] here, memory barrier is unnecessary as well. | |
| */ | |
| atomic_inc(&conf->nr_pending[idx]); | |
| if (!READ_ONCE(conf->array_frozen)) | |
| return ret; | |
| spin_lock_irq(&conf->resync_lock); | |
| atomic_inc(&conf->nr_waiting[idx]); | |
| atomic_dec(&conf->nr_pending[idx]); | |
| /* | |
| * In case freeze_array() is waiting for | |
| * get_unqueued_pending() == extra | |
| */ | |
| wake_up_barrier(conf); | |
| /* Wait for array to be unfrozen */ | |
| /* Return false when nowait flag is set */ | |
| if (nowait) { | |
| /* Return false when nowait flag is set */ | |
| ret = false; | |
| } else { | |
| wait_event_lock_irq(conf->wait_barrier, | |
| !conf->array_frozen, | |
| conf->resync_lock); | |
| atomic_inc(&conf->nr_pending[idx]); | |
| } | |
| atomic_dec(&conf->nr_waiting[idx]); | |
| spin_unlock_irq(&conf->resync_lock); | |
| return ret; | |
| } | |
| static bool wait_barrier(struct r1conf *conf, sector_t sector_nr, bool nowait) | |
| { | |
| int idx = sector_to_idx(sector_nr); | |
| return _wait_barrier(conf, idx, nowait); | |
| } | |
| static void _allow_barrier(struct r1conf *conf, int idx) | |
| { | |
| atomic_dec(&conf->nr_pending[idx]); | |
| wake_up_barrier(conf); | |
| } | |
| static void allow_barrier(struct r1conf *conf, sector_t sector_nr) | |
| { | |
| int idx = sector_to_idx(sector_nr); | |
| _allow_barrier(conf, idx); | |
| } | |
| /* conf->resync_lock should be held */ | |
| static int get_unqueued_pending(struct r1conf *conf) | |
| { | |
| int idx, ret; | |
| ret = atomic_read(&conf->nr_sync_pending); | |
| for (idx = 0; idx < BARRIER_BUCKETS_NR; idx++) | |
| ret += atomic_read(&conf->nr_pending[idx]) - | |
| atomic_read(&conf->nr_queued[idx]); | |
| return ret; | |
| } | |
| static void freeze_array(struct r1conf *conf, int extra) | |
| { | |
| /* Stop sync I/O and normal I/O and wait for everything to | |
| * go quiet. | |
| * This is called in two situations: | |
| * 1) management command handlers (reshape, remove disk, quiesce). | |
| * 2) one normal I/O request failed. | |
| * After array_frozen is set to 1, new sync IO will be blocked at | |
| * raise_barrier(), and new normal I/O will blocked at _wait_barrier() | |
| * or wait_read_barrier(). The flying I/Os will either complete or be | |
| * queued. When everything goes quite, there are only queued I/Os left. | |
| * Every flying I/O contributes to a conf->nr_pending[idx], idx is the | |
| * barrier bucket index which this I/O request hits. When all sync and | |
| * normal I/O are queued, sum of all conf->nr_pending[] will match sum | |
| * of all conf->nr_queued[]. But normal I/O failure is an exception, | |
| * in handle_read_error(), we may call freeze_array() before trying to | |
| * fix the read error. In this case, the error read I/O is not queued, | |
| * so get_unqueued_pending() == 1. | |
| * | |
| * Therefore before this function returns, we need to wait until | |
| * get_unqueued_pendings(conf) gets equal to extra. For | |
| * normal I/O context, extra is 1, in rested situations extra is 0. | |
| */ | |
| spin_lock_irq(&conf->resync_lock); | |
| conf->array_frozen = 1; | |
| raid1_log(conf->mddev, "wait freeze"); | |
| wait_event_lock_irq_cmd( | |
| conf->wait_barrier, | |
| get_unqueued_pending(conf) == extra, | |
| conf->resync_lock, | |
| flush_pending_writes(conf)); | |
| spin_unlock_irq(&conf->resync_lock); | |
| } | |
| static void unfreeze_array(struct r1conf *conf) | |
| { | |
| /* reverse the effect of the freeze */ | |
| spin_lock_irq(&conf->resync_lock); | |
| conf->array_frozen = 0; | |
| spin_unlock_irq(&conf->resync_lock); | |
| wake_up(&conf->wait_barrier); | |
| } | |
| static void alloc_behind_master_bio(struct r1bio *r1_bio, | |
| struct bio *bio) | |
| { | |
| int size = bio->bi_iter.bi_size; | |
| unsigned vcnt = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; | |
| int i = 0; | |
| struct bio *behind_bio = NULL; | |
| behind_bio = bio_alloc_bioset(NULL, vcnt, 0, GFP_NOIO, | |
| &r1_bio->mddev->bio_set); | |
| /* discard op, we don't support writezero/writesame yet */ | |
| if (!bio_has_data(bio)) { | |
| behind_bio->bi_iter.bi_size = size; | |
| goto skip_copy; | |
| } | |
| while (i < vcnt && size) { | |
| struct page *page; | |
| int len = min_t(int, PAGE_SIZE, size); | |
| page = alloc_page(GFP_NOIO); | |
| if (unlikely(!page)) | |
| goto free_pages; | |
| if (!bio_add_page(behind_bio, page, len, 0)) { | |
| put_page(page); | |
| goto free_pages; | |
| } | |
| size -= len; | |
| i++; | |
| } | |
| bio_copy_data(behind_bio, bio); | |
| skip_copy: | |
| r1_bio->behind_master_bio = behind_bio; | |
| set_bit(R1BIO_BehindIO, &r1_bio->state); | |
| return; | |
| free_pages: | |
| pr_debug("%dB behind alloc failed, doing sync I/O\n", | |
| bio->bi_iter.bi_size); | |
| bio_free_pages(behind_bio); | |
| bio_put(behind_bio); | |
| } | |
| static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule) | |
| { | |
| struct raid1_plug_cb *plug = container_of(cb, struct raid1_plug_cb, | |
| cb); | |
| struct mddev *mddev = plug->cb.data; | |
| struct r1conf *conf = mddev->private; | |
| struct bio *bio; | |
| if (from_schedule) { | |
| spin_lock_irq(&conf->device_lock); | |
| bio_list_merge(&conf->pending_bio_list, &plug->pending); | |
| spin_unlock_irq(&conf->device_lock); | |
| wake_up_barrier(conf); | |
| md_wakeup_thread(mddev->thread); | |
| kfree(plug); | |
| return; | |
| } | |
| /* we aren't scheduling, so we can do the write-out directly. */ | |
| bio = bio_list_get(&plug->pending); | |
| flush_bio_list(conf, bio); | |
| kfree(plug); | |
| } | |
| static void init_r1bio(struct r1bio *r1_bio, struct mddev *mddev, struct bio *bio) | |
| { | |
| r1_bio->master_bio = bio; | |
| r1_bio->sectors = bio_sectors(bio); | |
| r1_bio->state = 0; | |
| r1_bio->mddev = mddev; | |
| r1_bio->sector = bio->bi_iter.bi_sector; | |
| } | |
| static inline struct r1bio * | |
| alloc_r1bio(struct mddev *mddev, struct bio *bio) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| struct r1bio *r1_bio; | |
| r1_bio = mempool_alloc(&conf->r1bio_pool, GFP_NOIO); | |
| /* Ensure no bio records IO_BLOCKED */ | |
| memset(r1_bio->bios, 0, conf->raid_disks * sizeof(r1_bio->bios[0])); | |
| init_r1bio(r1_bio, mddev, bio); | |
| return r1_bio; | |
| } | |
| static void raid1_read_request(struct mddev *mddev, struct bio *bio, | |
| int max_read_sectors, struct r1bio *r1_bio) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| struct raid1_info *mirror; | |
| struct bio *read_bio; | |
| struct bitmap *bitmap = mddev->bitmap; | |
| const enum req_op op = bio_op(bio); | |
| const blk_opf_t do_sync = bio->bi_opf & REQ_SYNC; | |
| int max_sectors; | |
| int rdisk; | |
| bool r1bio_existed = !!r1_bio; | |
| char b[BDEVNAME_SIZE]; | |
| /* | |
| * If r1_bio is set, we are blocking the raid1d thread | |
| * so there is a tiny risk of deadlock. So ask for | |
| * emergency memory if needed. | |
| */ | |
| gfp_t gfp = r1_bio ? (GFP_NOIO | __GFP_HIGH) : GFP_NOIO; | |
| if (r1bio_existed) { | |
| /* Need to get the block device name carefully */ | |
| struct md_rdev *rdev = conf->mirrors[r1_bio->read_disk].rdev; | |
| if (rdev) | |
| snprintf(b, sizeof(b), "%pg", rdev->bdev); | |
| else | |
| strcpy(b, "???"); | |
| } | |
| /* | |
| * Still need barrier for READ in case that whole | |
| * array is frozen. | |
| */ | |
| if (!wait_read_barrier(conf, bio->bi_iter.bi_sector, | |
| bio->bi_opf & REQ_NOWAIT)) { | |
| bio_wouldblock_error(bio); | |
| return; | |
| } | |
| if (!r1_bio) | |
| r1_bio = alloc_r1bio(mddev, bio); | |
| else | |
| init_r1bio(r1_bio, mddev, bio); | |
| r1_bio->sectors = max_read_sectors; | |
| /* | |
| * make_request() can abort the operation when read-ahead is being | |
| * used and no empty request is available. | |
| */ | |
| rdisk = read_balance(conf, r1_bio, &max_sectors); | |
| if (rdisk < 0) { | |
| /* couldn't find anywhere to read from */ | |
| if (r1bio_existed) { | |
| pr_crit_ratelimited("md/raid1:%s: %s: unrecoverable I/O read error for block %llu\n", | |
| mdname(mddev), | |
| b, | |
| (unsigned long long)r1_bio->sector); | |
| } | |
| raid_end_bio_io(r1_bio); | |
| return; | |
| } | |
| mirror = conf->mirrors + rdisk; | |
| if (r1bio_existed) | |
| pr_info_ratelimited("md/raid1:%s: redirecting sector %llu to other mirror: %pg\n", | |
| mdname(mddev), | |
| (unsigned long long)r1_bio->sector, | |
| mirror->rdev->bdev); | |
| if (test_bit(WriteMostly, &mirror->rdev->flags) && | |
| bitmap) { | |
| /* | |
| * Reading from a write-mostly device must take care not to | |
| * over-take any writes that are 'behind' | |
| */ | |
| raid1_log(mddev, "wait behind writes"); | |
| wait_event(bitmap->behind_wait, | |
| atomic_read(&bitmap->behind_writes) == 0); | |
| } | |
| if (max_sectors < bio_sectors(bio)) { | |
| struct bio *split = bio_split(bio, max_sectors, | |
| gfp, &conf->bio_split); | |
| bio_chain(split, bio); | |
| submit_bio_noacct(bio); | |
| bio = split; | |
| r1_bio->master_bio = bio; | |
| r1_bio->sectors = max_sectors; | |
| } | |
| r1_bio->read_disk = rdisk; | |
| if (!r1bio_existed) { | |
| md_account_bio(mddev, &bio); | |
| r1_bio->master_bio = bio; | |
| } | |
| read_bio = bio_alloc_clone(mirror->rdev->bdev, bio, gfp, | |
| &mddev->bio_set); | |
| r1_bio->bios[rdisk] = read_bio; | |
| read_bio->bi_iter.bi_sector = r1_bio->sector + | |
| mirror->rdev->data_offset; | |
| read_bio->bi_end_io = raid1_end_read_request; | |
| read_bio->bi_opf = op | do_sync; | |
| if (test_bit(FailFast, &mirror->rdev->flags) && | |
| test_bit(R1BIO_FailFast, &r1_bio->state)) | |
| read_bio->bi_opf |= MD_FAILFAST; | |
| read_bio->bi_private = r1_bio; | |
| if (mddev->gendisk) | |
| trace_block_bio_remap(read_bio, disk_devt(mddev->gendisk), | |
| r1_bio->sector); | |
| submit_bio_noacct(read_bio); | |
| } | |
| static void raid1_write_request(struct mddev *mddev, struct bio *bio, | |
| int max_write_sectors) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| struct r1bio *r1_bio; | |
| int i, disks; | |
| struct bitmap *bitmap = mddev->bitmap; | |
| unsigned long flags; | |
| struct md_rdev *blocked_rdev; | |
| int first_clone; | |
| int max_sectors; | |
| bool write_behind = false; | |
| bool is_discard = (bio_op(bio) == REQ_OP_DISCARD); | |
| if (mddev_is_clustered(mddev) && | |
| md_cluster_ops->area_resyncing(mddev, WRITE, | |
| bio->bi_iter.bi_sector, bio_end_sector(bio))) { | |
| DEFINE_WAIT(w); | |
| if (bio->bi_opf & REQ_NOWAIT) { | |
| bio_wouldblock_error(bio); | |
| return; | |
| } | |
| for (;;) { | |
| prepare_to_wait(&conf->wait_barrier, | |
| &w, TASK_IDLE); | |
| if (!md_cluster_ops->area_resyncing(mddev, WRITE, | |
| bio->bi_iter.bi_sector, | |
| bio_end_sector(bio))) | |
| break; | |
| schedule(); | |
| } | |
| finish_wait(&conf->wait_barrier, &w); | |
| } | |
| /* | |
| * Register the new request and wait if the reconstruction | |
| * thread has put up a bar for new requests. | |
| * Continue immediately if no resync is active currently. | |
| */ | |
| if (!wait_barrier(conf, bio->bi_iter.bi_sector, | |
| bio->bi_opf & REQ_NOWAIT)) { | |
| bio_wouldblock_error(bio); | |
| return; | |
| } | |
| retry_write: | |
| r1_bio = alloc_r1bio(mddev, bio); | |
| r1_bio->sectors = max_write_sectors; | |
| /* first select target devices under rcu_lock and | |
| * inc refcount on their rdev. Record them by setting | |
| * bios[x] to bio | |
| * If there are known/acknowledged bad blocks on any device on | |
| * which we have seen a write error, we want to avoid writing those | |
| * blocks. | |
| * This potentially requires several writes to write around | |
| * the bad blocks. Each set of writes gets it's own r1bio | |
| * with a set of bios attached. | |
| */ | |
| disks = conf->raid_disks * 2; | |
| blocked_rdev = NULL; | |
| max_sectors = r1_bio->sectors; | |
| for (i = 0; i < disks; i++) { | |
| struct md_rdev *rdev = conf->mirrors[i].rdev; | |
| /* | |
| * The write-behind io is only attempted on drives marked as | |
| * write-mostly, which means we could allocate write behind | |
| * bio later. | |
| */ | |
| if (!is_discard && rdev && test_bit(WriteMostly, &rdev->flags)) | |
| write_behind = true; | |
| if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) { | |
| atomic_inc(&rdev->nr_pending); | |
| blocked_rdev = rdev; | |
| break; | |
| } | |
| r1_bio->bios[i] = NULL; | |
| if (!rdev || test_bit(Faulty, &rdev->flags)) { | |
| if (i < conf->raid_disks) | |
| set_bit(R1BIO_Degraded, &r1_bio->state); | |
| continue; | |
| } | |
| atomic_inc(&rdev->nr_pending); | |
| if (test_bit(WriteErrorSeen, &rdev->flags)) { | |
| sector_t first_bad; | |
| int bad_sectors; | |
| int is_bad; | |
| is_bad = is_badblock(rdev, r1_bio->sector, max_sectors, | |
| &first_bad, &bad_sectors); | |
| if (is_bad < 0) { | |
| /* mustn't write here until the bad block is | |
| * acknowledged*/ | |
| set_bit(BlockedBadBlocks, &rdev->flags); | |
| blocked_rdev = rdev; | |
| break; | |
| } | |
| if (is_bad && first_bad <= r1_bio->sector) { | |
| /* Cannot write here at all */ | |
| bad_sectors -= (r1_bio->sector - first_bad); | |
| if (bad_sectors < max_sectors) | |
| /* mustn't write more than bad_sectors | |
| * to other devices yet | |
| */ | |
| max_sectors = bad_sectors; | |
| rdev_dec_pending(rdev, mddev); | |
| /* We don't set R1BIO_Degraded as that | |
| * only applies if the disk is | |
| * missing, so it might be re-added, | |
| * and we want to know to recover this | |
| * chunk. | |
| * In this case the device is here, | |
| * and the fact that this chunk is not | |
| * in-sync is recorded in the bad | |
| * block log | |
| */ | |
| continue; | |
| } | |
| if (is_bad) { | |
| int good_sectors = first_bad - r1_bio->sector; | |
| if (good_sectors < max_sectors) | |
| max_sectors = good_sectors; | |
| } | |
| } | |
| r1_bio->bios[i] = bio; | |
| } | |
| if (unlikely(blocked_rdev)) { | |
| /* Wait for this device to become unblocked */ | |
| int j; | |
| for (j = 0; j < i; j++) | |
| if (r1_bio->bios[j]) | |
| rdev_dec_pending(conf->mirrors[j].rdev, mddev); | |
| free_r1bio(r1_bio); | |
| allow_barrier(conf, bio->bi_iter.bi_sector); | |
| if (bio->bi_opf & REQ_NOWAIT) { | |
| bio_wouldblock_error(bio); | |
| return; | |
| } | |
| raid1_log(mddev, "wait rdev %d blocked", blocked_rdev->raid_disk); | |
| md_wait_for_blocked_rdev(blocked_rdev, mddev); | |
| wait_barrier(conf, bio->bi_iter.bi_sector, false); | |
| goto retry_write; | |
| } | |
| /* | |
| * When using a bitmap, we may call alloc_behind_master_bio below. | |
| * alloc_behind_master_bio allocates a copy of the data payload a page | |
| * at a time and thus needs a new bio that can fit the whole payload | |
| * this bio in page sized chunks. | |
| */ | |
| if (write_behind && bitmap) | |
| max_sectors = min_t(int, max_sectors, | |
| BIO_MAX_VECS * (PAGE_SIZE >> 9)); | |
| if (max_sectors < bio_sectors(bio)) { | |
| struct bio *split = bio_split(bio, max_sectors, | |
| GFP_NOIO, &conf->bio_split); | |
| bio_chain(split, bio); | |
| submit_bio_noacct(bio); | |
| bio = split; | |
| r1_bio->master_bio = bio; | |
| r1_bio->sectors = max_sectors; | |
| } | |
| md_account_bio(mddev, &bio); | |
| r1_bio->master_bio = bio; | |
| atomic_set(&r1_bio->remaining, 1); | |
| atomic_set(&r1_bio->behind_remaining, 0); | |
| first_clone = 1; | |
| for (i = 0; i < disks; i++) { | |
| struct bio *mbio = NULL; | |
| struct md_rdev *rdev = conf->mirrors[i].rdev; | |
| if (!r1_bio->bios[i]) | |
| continue; | |
| if (first_clone) { | |
| /* do behind I/O ? | |
| * Not if there are too many, or cannot | |
| * allocate memory, or a reader on WriteMostly | |
| * is waiting for behind writes to flush */ | |
| if (bitmap && write_behind && | |
| (atomic_read(&bitmap->behind_writes) | |
| < mddev->bitmap_info.max_write_behind) && | |
| !waitqueue_active(&bitmap->behind_wait)) { | |
| alloc_behind_master_bio(r1_bio, bio); | |
| } | |
| md_bitmap_startwrite(bitmap, r1_bio->sector, r1_bio->sectors, | |
| test_bit(R1BIO_BehindIO, &r1_bio->state)); | |
| first_clone = 0; | |
| } | |
| if (r1_bio->behind_master_bio) { | |
| mbio = bio_alloc_clone(rdev->bdev, | |
| r1_bio->behind_master_bio, | |
| GFP_NOIO, &mddev->bio_set); | |
| if (test_bit(CollisionCheck, &rdev->flags)) | |
| wait_for_serialization(rdev, r1_bio); | |
| if (test_bit(WriteMostly, &rdev->flags)) | |
| atomic_inc(&r1_bio->behind_remaining); | |
| } else { | |
| mbio = bio_alloc_clone(rdev->bdev, bio, GFP_NOIO, | |
| &mddev->bio_set); | |
| if (mddev->serialize_policy) | |
| wait_for_serialization(rdev, r1_bio); | |
| } | |
| r1_bio->bios[i] = mbio; | |
| mbio->bi_iter.bi_sector = (r1_bio->sector + rdev->data_offset); | |
| mbio->bi_end_io = raid1_end_write_request; | |
| mbio->bi_opf = bio_op(bio) | (bio->bi_opf & (REQ_SYNC | REQ_FUA)); | |
| if (test_bit(FailFast, &rdev->flags) && | |
| !test_bit(WriteMostly, &rdev->flags) && | |
| conf->raid_disks - mddev->degraded > 1) | |
| mbio->bi_opf |= MD_FAILFAST; | |
| mbio->bi_private = r1_bio; | |
| atomic_inc(&r1_bio->remaining); | |
| if (mddev->gendisk) | |
| trace_block_bio_remap(mbio, disk_devt(mddev->gendisk), | |
| r1_bio->sector); | |
| /* flush_pending_writes() needs access to the rdev so...*/ | |
| mbio->bi_bdev = (void *)rdev; | |
| if (!raid1_add_bio_to_plug(mddev, mbio, raid1_unplug, disks)) { | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| bio_list_add(&conf->pending_bio_list, mbio); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| md_wakeup_thread(mddev->thread); | |
| } | |
| } | |
| r1_bio_write_done(r1_bio); | |
| /* In case raid1d snuck in to freeze_array */ | |
| wake_up_barrier(conf); | |
| } | |
| static bool raid1_make_request(struct mddev *mddev, struct bio *bio) | |
| { | |
| sector_t sectors; | |
| if (unlikely(bio->bi_opf & REQ_PREFLUSH) | |
| && md_flush_request(mddev, bio)) | |
| return true; | |
| /* | |
| * There is a limit to the maximum size, but | |
| * the read/write handler might find a lower limit | |
| * due to bad blocks. To avoid multiple splits, | |
| * we pass the maximum number of sectors down | |
| * and let the lower level perform the split. | |
| */ | |
| sectors = align_to_barrier_unit_end( | |
| bio->bi_iter.bi_sector, bio_sectors(bio)); | |
| if (bio_data_dir(bio) == READ) | |
| raid1_read_request(mddev, bio, sectors, NULL); | |
| else { | |
| if (!md_write_start(mddev,bio)) | |
| return false; | |
| raid1_write_request(mddev, bio, sectors); | |
| } | |
| return true; | |
| } | |
| static void raid1_status(struct seq_file *seq, struct mddev *mddev) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| int i; | |
| lockdep_assert_held(&mddev->lock); | |
| seq_printf(seq, " [%d/%d] [", conf->raid_disks, | |
| conf->raid_disks - mddev->degraded); | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| struct md_rdev *rdev = READ_ONCE(conf->mirrors[i].rdev); | |
| seq_printf(seq, "%s", | |
| rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_"); | |
| } | |
| seq_printf(seq, "]"); | |
| } | |
| /** | |
| * raid1_error() - RAID1 error handler. | |
| * @mddev: affected md device. | |
| * @rdev: member device to fail. | |
| * | |
| * The routine acknowledges &rdev failure and determines new @mddev state. | |
| * If it failed, then: | |
| * - &MD_BROKEN flag is set in &mddev->flags. | |
| * - recovery is disabled. | |
| * Otherwise, it must be degraded: | |
| * - recovery is interrupted. | |
| * - &mddev->degraded is bumped. | |
| * | |
| * @rdev is marked as &Faulty excluding case when array is failed and | |
| * &mddev->fail_last_dev is off. | |
| */ | |
| static void raid1_error(struct mddev *mddev, struct md_rdev *rdev) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| unsigned long flags; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| if (test_bit(In_sync, &rdev->flags) && | |
| (conf->raid_disks - mddev->degraded) == 1) { | |
| set_bit(MD_BROKEN, &mddev->flags); | |
| if (!mddev->fail_last_dev) { | |
| conf->recovery_disabled = mddev->recovery_disabled; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| return; | |
| } | |
| } | |
| set_bit(Blocked, &rdev->flags); | |
| if (test_and_clear_bit(In_sync, &rdev->flags)) | |
| mddev->degraded++; | |
| set_bit(Faulty, &rdev->flags); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| /* | |
| * if recovery is running, make sure it aborts. | |
| */ | |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); | |
| set_mask_bits(&mddev->sb_flags, 0, | |
| BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING)); | |
| pr_crit("md/raid1:%s: Disk failure on %pg, disabling device.\n" | |
| "md/raid1:%s: Operation continuing on %d devices.\n", | |
| mdname(mddev), rdev->bdev, | |
| mdname(mddev), conf->raid_disks - mddev->degraded); | |
| } | |
| static void print_conf(struct r1conf *conf) | |
| { | |
| int i; | |
| pr_debug("RAID1 conf printout:\n"); | |
| if (!conf) { | |
| pr_debug("(!conf)\n"); | |
| return; | |
| } | |
| pr_debug(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded, | |
| conf->raid_disks); | |
| lockdep_assert_held(&conf->mddev->reconfig_mutex); | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| struct md_rdev *rdev = conf->mirrors[i].rdev; | |
| if (rdev) | |
| pr_debug(" disk %d, wo:%d, o:%d, dev:%pg\n", | |
| i, !test_bit(In_sync, &rdev->flags), | |
| !test_bit(Faulty, &rdev->flags), | |
| rdev->bdev); | |
| } | |
| } | |
| static void close_sync(struct r1conf *conf) | |
| { | |
| int idx; | |
| for (idx = 0; idx < BARRIER_BUCKETS_NR; idx++) { | |
| _wait_barrier(conf, idx, false); | |
| _allow_barrier(conf, idx); | |
| } | |
| mempool_exit(&conf->r1buf_pool); | |
| } | |
| static int raid1_spare_active(struct mddev *mddev) | |
| { | |
| int i; | |
| struct r1conf *conf = mddev->private; | |
| int count = 0; | |
| unsigned long flags; | |
| /* | |
| * Find all failed disks within the RAID1 configuration | |
| * and mark them readable. | |
| * Called under mddev lock, so rcu protection not needed. | |
| * device_lock used to avoid races with raid1_end_read_request | |
| * which expects 'In_sync' flags and ->degraded to be consistent. | |
| */ | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| for (i = 0; i < conf->raid_disks; i++) { | |
| struct md_rdev *rdev = conf->mirrors[i].rdev; | |
| struct md_rdev *repl = conf->mirrors[conf->raid_disks + i].rdev; | |
| if (repl | |
| && !test_bit(Candidate, &repl->flags) | |
| && repl->recovery_offset == MaxSector | |
| && !test_bit(Faulty, &repl->flags) | |
| && !test_and_set_bit(In_sync, &repl->flags)) { | |
| /* replacement has just become active */ | |
| if (!rdev || | |
| !test_and_clear_bit(In_sync, &rdev->flags)) | |
| count++; | |
| if (rdev) { | |
| /* Replaced device not technically | |
| * faulty, but we need to be sure | |
| * it gets removed and never re-added | |
| */ | |
| set_bit(Faulty, &rdev->flags); | |
| sysfs_notify_dirent_safe( | |
| rdev->sysfs_state); | |
| } | |
| } | |
| if (rdev | |
| && rdev->recovery_offset == MaxSector | |
| && !test_bit(Faulty, &rdev->flags) | |
| && !test_and_set_bit(In_sync, &rdev->flags)) { | |
| count++; | |
| sysfs_notify_dirent_safe(rdev->sysfs_state); | |
| } | |
| } | |
| mddev->degraded -= count; | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| print_conf(conf); | |
| return count; | |
| } | |
| static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| int err = -EEXIST; | |
| int mirror = 0, repl_slot = -1; | |
| struct raid1_info *p; | |
| int first = 0; | |
| int last = conf->raid_disks - 1; | |
| if (mddev->recovery_disabled == conf->recovery_disabled) | |
| return -EBUSY; | |
| if (md_integrity_add_rdev(rdev, mddev)) | |
| return -ENXIO; | |
| if (rdev->raid_disk >= 0) | |
| first = last = rdev->raid_disk; | |
| /* | |
| * find the disk ... but prefer rdev->saved_raid_disk | |
| * if possible. | |
| */ | |
| if (rdev->saved_raid_disk >= 0 && | |
| rdev->saved_raid_disk >= first && | |
| rdev->saved_raid_disk < conf->raid_disks && | |
| conf->mirrors[rdev->saved_raid_disk].rdev == NULL) | |
| first = last = rdev->saved_raid_disk; | |
| for (mirror = first; mirror <= last; mirror++) { | |
| p = conf->mirrors + mirror; | |
| if (!p->rdev) { | |
| if (mddev->gendisk) | |
| disk_stack_limits(mddev->gendisk, rdev->bdev, | |
| rdev->data_offset << 9); | |
| p->head_position = 0; | |
| rdev->raid_disk = mirror; | |
| err = 0; | |
| /* As all devices are equivalent, we don't need a full recovery | |
| * if this was recently any drive of the array | |
| */ | |
| if (rdev->saved_raid_disk < 0) | |
| conf->fullsync = 1; | |
| WRITE_ONCE(p->rdev, rdev); | |
| break; | |
| } | |
| if (test_bit(WantReplacement, &p->rdev->flags) && | |
| p[conf->raid_disks].rdev == NULL && repl_slot < 0) | |
| repl_slot = mirror; | |
| } | |
| if (err && repl_slot >= 0) { | |
| /* Add this device as a replacement */ | |
| p = conf->mirrors + repl_slot; | |
| clear_bit(In_sync, &rdev->flags); | |
| set_bit(Replacement, &rdev->flags); | |
| rdev->raid_disk = repl_slot; | |
| err = 0; | |
| conf->fullsync = 1; | |
| WRITE_ONCE(p[conf->raid_disks].rdev, rdev); | |
| } | |
| print_conf(conf); | |
| return err; | |
| } | |
| static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| int err = 0; | |
| int number = rdev->raid_disk; | |
| struct raid1_info *p = conf->mirrors + number; | |
| if (unlikely(number >= conf->raid_disks)) | |
| goto abort; | |
| if (rdev != p->rdev) | |
| p = conf->mirrors + conf->raid_disks + number; | |
| print_conf(conf); | |
| if (rdev == p->rdev) { | |
| if (test_bit(In_sync, &rdev->flags) || | |
| atomic_read(&rdev->nr_pending)) { | |
| err = -EBUSY; | |
| goto abort; | |
| } | |
| /* Only remove non-faulty devices if recovery | |
| * is not possible. | |
| */ | |
| if (!test_bit(Faulty, &rdev->flags) && | |
| mddev->recovery_disabled != conf->recovery_disabled && | |
| mddev->degraded < conf->raid_disks) { | |
| err = -EBUSY; | |
| goto abort; | |
| } | |
| WRITE_ONCE(p->rdev, NULL); | |
| if (conf->mirrors[conf->raid_disks + number].rdev) { | |
| /* We just removed a device that is being replaced. | |
| * Move down the replacement. We drain all IO before | |
| * doing this to avoid confusion. | |
| */ | |
| struct md_rdev *repl = | |
| conf->mirrors[conf->raid_disks + number].rdev; | |
| freeze_array(conf, 0); | |
| if (atomic_read(&repl->nr_pending)) { | |
| /* It means that some queued IO of retry_list | |
| * hold repl. Thus, we cannot set replacement | |
| * as NULL, avoiding rdev NULL pointer | |
| * dereference in sync_request_write and | |
| * handle_write_finished. | |
| */ | |
| err = -EBUSY; | |
| unfreeze_array(conf); | |
| goto abort; | |
| } | |
| clear_bit(Replacement, &repl->flags); | |
| WRITE_ONCE(p->rdev, repl); | |
| conf->mirrors[conf->raid_disks + number].rdev = NULL; | |
| unfreeze_array(conf); | |
| } | |
| clear_bit(WantReplacement, &rdev->flags); | |
| err = md_integrity_register(mddev); | |
| } | |
| abort: | |
| print_conf(conf); | |
| return err; | |
| } | |
| static void end_sync_read(struct bio *bio) | |
| { | |
| struct r1bio *r1_bio = get_resync_r1bio(bio); | |
| update_head_pos(r1_bio->read_disk, r1_bio); | |
| /* | |
| * we have read a block, now it needs to be re-written, | |
| * or re-read if the read failed. | |
| * We don't do much here, just schedule handling by raid1d | |
| */ | |
| if (!bio->bi_status) | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| if (atomic_dec_and_test(&r1_bio->remaining)) | |
| reschedule_retry(r1_bio); | |
| } | |
| static void abort_sync_write(struct mddev *mddev, struct r1bio *r1_bio) | |
| { | |
| sector_t sync_blocks = 0; | |
| sector_t s = r1_bio->sector; | |
| long sectors_to_go = r1_bio->sectors; | |
| /* make sure these bits don't get cleared. */ | |
| do { | |
| md_bitmap_end_sync(mddev->bitmap, s, &sync_blocks, 1); | |
| s += sync_blocks; | |
| sectors_to_go -= sync_blocks; | |
| } while (sectors_to_go > 0); | |
| } | |
| static void put_sync_write_buf(struct r1bio *r1_bio, int uptodate) | |
| { | |
| if (atomic_dec_and_test(&r1_bio->remaining)) { | |
| struct mddev *mddev = r1_bio->mddev; | |
| int s = r1_bio->sectors; | |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state) || | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| reschedule_retry(r1_bio); | |
| else { | |
| put_buf(r1_bio); | |
| md_done_sync(mddev, s, uptodate); | |
| } | |
| } | |
| } | |
| static void end_sync_write(struct bio *bio) | |
| { | |
| int uptodate = !bio->bi_status; | |
| struct r1bio *r1_bio = get_resync_r1bio(bio); | |
| struct mddev *mddev = r1_bio->mddev; | |
| struct r1conf *conf = mddev->private; | |
| sector_t first_bad; | |
| int bad_sectors; | |
| struct md_rdev *rdev = conf->mirrors[find_bio_disk(r1_bio, bio)].rdev; | |
| if (!uptodate) { | |
| abort_sync_write(mddev, r1_bio); | |
| set_bit(WriteErrorSeen, &rdev->flags); | |
| if (!test_and_set_bit(WantReplacement, &rdev->flags)) | |
| set_bit(MD_RECOVERY_NEEDED, & | |
| mddev->recovery); | |
| set_bit(R1BIO_WriteError, &r1_bio->state); | |
| } else if (is_badblock(rdev, r1_bio->sector, r1_bio->sectors, | |
| &first_bad, &bad_sectors) && | |
| !is_badblock(conf->mirrors[r1_bio->read_disk].rdev, | |
| r1_bio->sector, | |
| r1_bio->sectors, | |
| &first_bad, &bad_sectors) | |
| ) | |
| set_bit(R1BIO_MadeGood, &r1_bio->state); | |
| put_sync_write_buf(r1_bio, uptodate); | |
| } | |
| static int r1_sync_page_io(struct md_rdev *rdev, sector_t sector, | |
| int sectors, struct page *page, blk_opf_t rw) | |
| { | |
| if (sync_page_io(rdev, sector, sectors << 9, page, rw, false)) | |
| /* success */ | |
| return 1; | |
| if (rw == REQ_OP_WRITE) { | |
| set_bit(WriteErrorSeen, &rdev->flags); | |
| if (!test_and_set_bit(WantReplacement, | |
| &rdev->flags)) | |
| set_bit(MD_RECOVERY_NEEDED, & | |
| rdev->mddev->recovery); | |
| } | |
| /* need to record an error - either for the block or the device */ | |
| if (!rdev_set_badblocks(rdev, sector, sectors, 0)) | |
| md_error(rdev->mddev, rdev); | |
| return 0; | |
| } | |
| static int fix_sync_read_error(struct r1bio *r1_bio) | |
| { | |
| /* Try some synchronous reads of other devices to get | |
| * good data, much like with normal read errors. Only | |
| * read into the pages we already have so we don't | |
| * need to re-issue the read request. | |
| * We don't need to freeze the array, because being in an | |
| * active sync request, there is no normal IO, and | |
| * no overlapping syncs. | |
| * We don't need to check is_badblock() again as we | |
| * made sure that anything with a bad block in range | |
| * will have bi_end_io clear. | |
| */ | |
| struct mddev *mddev = r1_bio->mddev; | |
| struct r1conf *conf = mddev->private; | |
| struct bio *bio = r1_bio->bios[r1_bio->read_disk]; | |
| struct page **pages = get_resync_pages(bio)->pages; | |
| sector_t sect = r1_bio->sector; | |
| int sectors = r1_bio->sectors; | |
| int idx = 0; | |
| struct md_rdev *rdev; | |
| rdev = conf->mirrors[r1_bio->read_disk].rdev; | |
| if (test_bit(FailFast, &rdev->flags)) { | |
| /* Don't try recovering from here - just fail it | |
| * ... unless it is the last working device of course */ | |
| md_error(mddev, rdev); | |
| if (test_bit(Faulty, &rdev->flags)) | |
| /* Don't try to read from here, but make sure | |
| * put_buf does it's thing | |
| */ | |
| bio->bi_end_io = end_sync_write; | |
| } | |
| while(sectors) { | |
| int s = sectors; | |
| int d = r1_bio->read_disk; | |
| int success = 0; | |
| int start; | |
| if (s > (PAGE_SIZE>>9)) | |
| s = PAGE_SIZE >> 9; | |
| do { | |
| if (r1_bio->bios[d]->bi_end_io == end_sync_read) { | |
| /* No rcu protection needed here devices | |
| * can only be removed when no resync is | |
| * active, and resync is currently active | |
| */ | |
| rdev = conf->mirrors[d].rdev; | |
| if (sync_page_io(rdev, sect, s<<9, | |
| pages[idx], | |
| REQ_OP_READ, false)) { | |
| success = 1; | |
| break; | |
| } | |
| } | |
| d++; | |
| if (d == conf->raid_disks * 2) | |
| d = 0; | |
| } while (!success && d != r1_bio->read_disk); | |
| if (!success) { | |
| int abort = 0; | |
| /* Cannot read from anywhere, this block is lost. | |
| * Record a bad block on each device. If that doesn't | |
| * work just disable and interrupt the recovery. | |
| * Don't fail devices as that won't really help. | |
| */ | |
| pr_crit_ratelimited("md/raid1:%s: %pg: unrecoverable I/O read error for block %llu\n", | |
| mdname(mddev), bio->bi_bdev, | |
| (unsigned long long)r1_bio->sector); | |
| for (d = 0; d < conf->raid_disks * 2; d++) { | |
| rdev = conf->mirrors[d].rdev; | |
| if (!rdev || test_bit(Faulty, &rdev->flags)) | |
| continue; | |
| if (!rdev_set_badblocks(rdev, sect, s, 0)) | |
| abort = 1; | |
| } | |
| if (abort) { | |
| conf->recovery_disabled = | |
| mddev->recovery_disabled; | |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); | |
| md_done_sync(mddev, r1_bio->sectors, 0); | |
| put_buf(r1_bio); | |
| return 0; | |
| } | |
| /* Try next page */ | |
| sectors -= s; | |
| sect += s; | |
| idx++; | |
| continue; | |
| } | |
| start = d; | |
| /* write it back and re-read */ | |
| while (d != r1_bio->read_disk) { | |
| if (d == 0) | |
| d = conf->raid_disks * 2; | |
| d--; | |
| if (r1_bio->bios[d]->bi_end_io != end_sync_read) | |
| continue; | |
| rdev = conf->mirrors[d].rdev; | |
| if (r1_sync_page_io(rdev, sect, s, | |
| pages[idx], | |
| REQ_OP_WRITE) == 0) { | |
| r1_bio->bios[d]->bi_end_io = NULL; | |
| rdev_dec_pending(rdev, mddev); | |
| } | |
| } | |
| d = start; | |
| while (d != r1_bio->read_disk) { | |
| if (d == 0) | |
| d = conf->raid_disks * 2; | |
| d--; | |
| if (r1_bio->bios[d]->bi_end_io != end_sync_read) | |
| continue; | |
| rdev = conf->mirrors[d].rdev; | |
| if (r1_sync_page_io(rdev, sect, s, | |
| pages[idx], | |
| REQ_OP_READ) != 0) | |
| atomic_add(s, &rdev->corrected_errors); | |
| } | |
| sectors -= s; | |
| sect += s; | |
| idx ++; | |
| } | |
| set_bit(R1BIO_Uptodate, &r1_bio->state); | |
| bio->bi_status = 0; | |
| return 1; | |
| } | |
| static void process_checks(struct r1bio *r1_bio) | |
| { | |
| /* We have read all readable devices. If we haven't | |
| * got the block, then there is no hope left. | |
| * If we have, then we want to do a comparison | |
| * and skip the write if everything is the same. | |
| * If any blocks failed to read, then we need to | |
| * attempt an over-write | |
| */ | |
| struct mddev *mddev = r1_bio->mddev; | |
| struct r1conf *conf = mddev->private; | |
| int primary; | |
| int i; | |
| int vcnt; | |
| /* Fix variable parts of all bios */ | |
| vcnt = (r1_bio->sectors + PAGE_SIZE / 512 - 1) >> (PAGE_SHIFT - 9); | |
| for (i = 0; i < conf->raid_disks * 2; i++) { | |
| blk_status_t status; | |
| struct bio *b = r1_bio->bios[i]; | |
| struct resync_pages *rp = get_resync_pages(b); | |
| if (b->bi_end_io != end_sync_read) | |
| continue; | |
| /* fixup the bio for reuse, but preserve errno */ | |
| status = b->bi_status; | |
| bio_reset(b, conf->mirrors[i].rdev->bdev, REQ_OP_READ); | |
| b->bi_status = status; | |
| b->bi_iter.bi_sector = r1_bio->sector + | |
| conf->mirrors[i].rdev->data_offset; | |
| b->bi_end_io = end_sync_read; | |
| rp->raid_bio = r1_bio; | |
| b->bi_private = rp; | |
| /* initialize bvec table again */ | |
| md_bio_reset_resync_pages(b, rp, r1_bio->sectors << 9); | |
| } | |
| for (primary = 0; primary < conf->raid_disks * 2; primary++) | |
| if (r1_bio->bios[primary]->bi_end_io == end_sync_read && | |
| !r1_bio->bios[primary]->bi_status) { | |
| r1_bio->bios[primary]->bi_end_io = NULL; | |
| rdev_dec_pending(conf->mirrors[primary].rdev, mddev); | |
| break; | |
| } | |
| r1_bio->read_disk = primary; | |
| for (i = 0; i < conf->raid_disks * 2; i++) { | |
| int j = 0; | |
| struct bio *pbio = r1_bio->bios[primary]; | |
| struct bio *sbio = r1_bio->bios[i]; | |
| blk_status_t status = sbio->bi_status; | |
| struct page **ppages = get_resync_pages(pbio)->pages; | |
| struct page **spages = get_resync_pages(sbio)->pages; | |
| struct bio_vec *bi; | |
| int page_len[RESYNC_PAGES] = { 0 }; | |
| struct bvec_iter_all iter_all; | |
| if (sbio->bi_end_io != end_sync_read) | |
| continue; | |
| /* Now we can 'fixup' the error value */ | |
| sbio->bi_status = 0; | |
| bio_for_each_segment_all(bi, sbio, iter_all) | |
| page_len[j++] = bi->bv_len; | |
| if (!status) { | |
| for (j = vcnt; j-- ; ) { | |
| if (memcmp(page_address(ppages[j]), | |
| page_address(spages[j]), | |
| page_len[j])) | |
| break; | |
| } | |
| } else | |
| j = 0; | |
| if (j >= 0) | |
| atomic64_add(r1_bio->sectors, &mddev->resync_mismatches); | |
| if (j < 0 || (test_bit(MD_RECOVERY_CHECK, &mddev->recovery) | |
| && !status)) { | |
| /* No need to write to this device. */ | |
| sbio->bi_end_io = NULL; | |
| rdev_dec_pending(conf->mirrors[i].rdev, mddev); | |
| continue; | |
| } | |
| bio_copy_data(sbio, pbio); | |
| } | |
| } | |
| static void sync_request_write(struct mddev *mddev, struct r1bio *r1_bio) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| int i; | |
| int disks = conf->raid_disks * 2; | |
| struct bio *wbio; | |
| if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) | |
| /* ouch - failed to read all of that. */ | |
| if (!fix_sync_read_error(r1_bio)) | |
| return; | |
| if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) | |
| process_checks(r1_bio); | |
| /* | |
| * schedule writes | |
| */ | |
| atomic_set(&r1_bio->remaining, 1); | |
| for (i = 0; i < disks ; i++) { | |
| wbio = r1_bio->bios[i]; | |
| if (wbio->bi_end_io == NULL || | |
| (wbio->bi_end_io == end_sync_read && | |
| (i == r1_bio->read_disk || | |
| !test_bit(MD_RECOVERY_SYNC, &mddev->recovery)))) | |
| continue; | |
| if (test_bit(Faulty, &conf->mirrors[i].rdev->flags)) { | |
| abort_sync_write(mddev, r1_bio); | |
| continue; | |
| } | |
| wbio->bi_opf = REQ_OP_WRITE; | |
| if (test_bit(FailFast, &conf->mirrors[i].rdev->flags)) | |
| wbio->bi_opf |= MD_FAILFAST; | |
| wbio->bi_end_io = end_sync_write; | |
| atomic_inc(&r1_bio->remaining); | |
| md_sync_acct(conf->mirrors[i].rdev->bdev, bio_sectors(wbio)); | |
| submit_bio_noacct(wbio); | |
| } | |
| put_sync_write_buf(r1_bio, 1); | |
| } | |
| /* | |
| * This is a kernel thread which: | |
| * | |
| * 1. Retries failed read operations on working mirrors. | |
| * 2. Updates the raid superblock when problems encounter. | |
| * 3. Performs writes following reads for array synchronising. | |
| */ | |
| static void fix_read_error(struct r1conf *conf, struct r1bio *r1_bio) | |
| { | |
| sector_t sect = r1_bio->sector; | |
| int sectors = r1_bio->sectors; | |
| int read_disk = r1_bio->read_disk; | |
| struct mddev *mddev = conf->mddev; | |
| struct md_rdev *rdev = conf->mirrors[read_disk].rdev; | |
| if (exceed_read_errors(mddev, rdev)) { | |
| r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED; | |
| return; | |
| } | |
| while(sectors) { | |
| int s = sectors; | |
| int d = read_disk; | |
| int success = 0; | |
| int start; | |
| if (s > (PAGE_SIZE>>9)) | |
| s = PAGE_SIZE >> 9; | |
| do { | |
| sector_t first_bad; | |
| int bad_sectors; | |
| rdev = conf->mirrors[d].rdev; | |
| if (rdev && | |
| (test_bit(In_sync, &rdev->flags) || | |
| (!test_bit(Faulty, &rdev->flags) && | |
| rdev->recovery_offset >= sect + s)) && | |
| is_badblock(rdev, sect, s, | |
| &first_bad, &bad_sectors) == 0) { | |
| atomic_inc(&rdev->nr_pending); | |
| if (sync_page_io(rdev, sect, s<<9, | |
| conf->tmppage, REQ_OP_READ, false)) | |
| success = 1; | |
| rdev_dec_pending(rdev, mddev); | |
| if (success) | |
| break; | |
| } | |
| d++; | |
| if (d == conf->raid_disks * 2) | |
| d = 0; | |
| } while (d != read_disk); | |
| if (!success) { | |
| /* Cannot read from anywhere - mark it bad */ | |
| struct md_rdev *rdev = conf->mirrors[read_disk].rdev; | |
| if (!rdev_set_badblocks(rdev, sect, s, 0)) | |
| md_error(mddev, rdev); | |
| break; | |
| } | |
| /* write it back and re-read */ | |
| start = d; | |
| while (d != read_disk) { | |
| if (d==0) | |
| d = conf->raid_disks * 2; | |
| d--; | |
| rdev = conf->mirrors[d].rdev; | |
| if (rdev && | |
| !test_bit(Faulty, &rdev->flags)) { | |
| atomic_inc(&rdev->nr_pending); | |
| r1_sync_page_io(rdev, sect, s, | |
| conf->tmppage, REQ_OP_WRITE); | |
| rdev_dec_pending(rdev, mddev); | |
| } | |
| } | |
| d = start; | |
| while (d != read_disk) { | |
| if (d==0) | |
| d = conf->raid_disks * 2; | |
| d--; | |
| rdev = conf->mirrors[d].rdev; | |
| if (rdev && | |
| !test_bit(Faulty, &rdev->flags)) { | |
| atomic_inc(&rdev->nr_pending); | |
| if (r1_sync_page_io(rdev, sect, s, | |
| conf->tmppage, REQ_OP_READ)) { | |
| atomic_add(s, &rdev->corrected_errors); | |
| pr_info("md/raid1:%s: read error corrected (%d sectors at %llu on %pg)\n", | |
| mdname(mddev), s, | |
| (unsigned long long)(sect + | |
| rdev->data_offset), | |
| rdev->bdev); | |
| } | |
| rdev_dec_pending(rdev, mddev); | |
| } | |
| } | |
| sectors -= s; | |
| sect += s; | |
| } | |
| } | |
| static int narrow_write_error(struct r1bio *r1_bio, int i) | |
| { | |
| struct mddev *mddev = r1_bio->mddev; | |
| struct r1conf *conf = mddev->private; | |
| struct md_rdev *rdev = conf->mirrors[i].rdev; | |
| /* bio has the data to be written to device 'i' where | |
| * we just recently had a write error. | |
| * We repeatedly clone the bio and trim down to one block, | |
| * then try the write. Where the write fails we record | |
| * a bad block. | |
| * It is conceivable that the bio doesn't exactly align with | |
| * blocks. We must handle this somehow. | |
| * | |
| * We currently own a reference on the rdev. | |
| */ | |
| int block_sectors; | |
| sector_t sector; | |
| int sectors; | |
| int sect_to_write = r1_bio->sectors; | |
| int ok = 1; | |
| if (rdev->badblocks.shift < 0) | |
| return 0; | |
| block_sectors = roundup(1 << rdev->badblocks.shift, | |
| bdev_logical_block_size(rdev->bdev) >> 9); | |
| sector = r1_bio->sector; | |
| sectors = ((sector + block_sectors) | |
| & ~(sector_t)(block_sectors - 1)) | |
| - sector; | |
| while (sect_to_write) { | |
| struct bio *wbio; | |
| if (sectors > sect_to_write) | |
| sectors = sect_to_write; | |
| /* Write at 'sector' for 'sectors'*/ | |
| if (test_bit(R1BIO_BehindIO, &r1_bio->state)) { | |
| wbio = bio_alloc_clone(rdev->bdev, | |
| r1_bio->behind_master_bio, | |
| GFP_NOIO, &mddev->bio_set); | |
| } else { | |
| wbio = bio_alloc_clone(rdev->bdev, r1_bio->master_bio, | |
| GFP_NOIO, &mddev->bio_set); | |
| } | |
| wbio->bi_opf = REQ_OP_WRITE; | |
| wbio->bi_iter.bi_sector = r1_bio->sector; | |
| wbio->bi_iter.bi_size = r1_bio->sectors << 9; | |
| bio_trim(wbio, sector - r1_bio->sector, sectors); | |
| wbio->bi_iter.bi_sector += rdev->data_offset; | |
| if (submit_bio_wait(wbio) < 0) | |
| /* failure! */ | |
| ok = rdev_set_badblocks(rdev, sector, | |
| sectors, 0) | |
| && ok; | |
| bio_put(wbio); | |
| sect_to_write -= sectors; | |
| sector += sectors; | |
| sectors = block_sectors; | |
| } | |
| return ok; | |
| } | |
| static void handle_sync_write_finished(struct r1conf *conf, struct r1bio *r1_bio) | |
| { | |
| int m; | |
| int s = r1_bio->sectors; | |
| for (m = 0; m < conf->raid_disks * 2 ; m++) { | |
| struct md_rdev *rdev = conf->mirrors[m].rdev; | |
| struct bio *bio = r1_bio->bios[m]; | |
| if (bio->bi_end_io == NULL) | |
| continue; | |
| if (!bio->bi_status && | |
| test_bit(R1BIO_MadeGood, &r1_bio->state)) { | |
| rdev_clear_badblocks(rdev, r1_bio->sector, s, 0); | |
| } | |
| if (bio->bi_status && | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) { | |
| if (!rdev_set_badblocks(rdev, r1_bio->sector, s, 0)) | |
| md_error(conf->mddev, rdev); | |
| } | |
| } | |
| put_buf(r1_bio); | |
| md_done_sync(conf->mddev, s, 1); | |
| } | |
| static void handle_write_finished(struct r1conf *conf, struct r1bio *r1_bio) | |
| { | |
| int m, idx; | |
| bool fail = false; | |
| for (m = 0; m < conf->raid_disks * 2 ; m++) | |
| if (r1_bio->bios[m] == IO_MADE_GOOD) { | |
| struct md_rdev *rdev = conf->mirrors[m].rdev; | |
| rdev_clear_badblocks(rdev, | |
| r1_bio->sector, | |
| r1_bio->sectors, 0); | |
| rdev_dec_pending(rdev, conf->mddev); | |
| } else if (r1_bio->bios[m] != NULL) { | |
| /* This drive got a write error. We need to | |
| * narrow down and record precise write | |
| * errors. | |
| */ | |
| fail = true; | |
| if (!narrow_write_error(r1_bio, m)) { | |
| md_error(conf->mddev, | |
| conf->mirrors[m].rdev); | |
| /* an I/O failed, we can't clear the bitmap */ | |
| set_bit(R1BIO_Degraded, &r1_bio->state); | |
| } | |
| rdev_dec_pending(conf->mirrors[m].rdev, | |
| conf->mddev); | |
| } | |
| if (fail) { | |
| spin_lock_irq(&conf->device_lock); | |
| list_add(&r1_bio->retry_list, &conf->bio_end_io_list); | |
| idx = sector_to_idx(r1_bio->sector); | |
| atomic_inc(&conf->nr_queued[idx]); | |
| spin_unlock_irq(&conf->device_lock); | |
| /* | |
| * In case freeze_array() is waiting for condition | |
| * get_unqueued_pending() == extra to be true. | |
| */ | |
| wake_up(&conf->wait_barrier); | |
| md_wakeup_thread(conf->mddev->thread); | |
| } else { | |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| close_write(r1_bio); | |
| raid_end_bio_io(r1_bio); | |
| } | |
| } | |
| static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) | |
| { | |
| struct mddev *mddev = conf->mddev; | |
| struct bio *bio; | |
| struct md_rdev *rdev; | |
| sector_t sector; | |
| clear_bit(R1BIO_ReadError, &r1_bio->state); | |
| /* we got a read error. Maybe the drive is bad. Maybe just | |
| * the block and we can fix it. | |
| * We freeze all other IO, and try reading the block from | |
| * other devices. When we find one, we re-write | |
| * and check it that fixes the read error. | |
| * This is all done synchronously while the array is | |
| * frozen | |
| */ | |
| bio = r1_bio->bios[r1_bio->read_disk]; | |
| bio_put(bio); | |
| r1_bio->bios[r1_bio->read_disk] = NULL; | |
| rdev = conf->mirrors[r1_bio->read_disk].rdev; | |
| if (mddev->ro == 0 | |
| && !test_bit(FailFast, &rdev->flags)) { | |
| freeze_array(conf, 1); | |
| fix_read_error(conf, r1_bio); | |
| unfreeze_array(conf); | |
| } else if (mddev->ro == 0 && test_bit(FailFast, &rdev->flags)) { | |
| md_error(mddev, rdev); | |
| } else { | |
| r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED; | |
| } | |
| rdev_dec_pending(rdev, conf->mddev); | |
| sector = r1_bio->sector; | |
| bio = r1_bio->master_bio; | |
| /* Reuse the old r1_bio so that the IO_BLOCKED settings are preserved */ | |
| r1_bio->state = 0; | |
| raid1_read_request(mddev, bio, r1_bio->sectors, r1_bio); | |
| allow_barrier(conf, sector); | |
| } | |
| static void raid1d(struct md_thread *thread) | |
| { | |
| struct mddev *mddev = thread->mddev; | |
| struct r1bio *r1_bio; | |
| unsigned long flags; | |
| struct r1conf *conf = mddev->private; | |
| struct list_head *head = &conf->retry_list; | |
| struct blk_plug plug; | |
| int idx; | |
| md_check_recovery(mddev); | |
| if (!list_empty_careful(&conf->bio_end_io_list) && | |
| !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) { | |
| LIST_HEAD(tmp); | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| if (!test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags)) | |
| list_splice_init(&conf->bio_end_io_list, &tmp); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| while (!list_empty(&tmp)) { | |
| r1_bio = list_first_entry(&tmp, struct r1bio, | |
| retry_list); | |
| list_del(&r1_bio->retry_list); | |
| idx = sector_to_idx(r1_bio->sector); | |
| atomic_dec(&conf->nr_queued[idx]); | |
| if (mddev->degraded) | |
| set_bit(R1BIO_Degraded, &r1_bio->state); | |
| if (test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| close_write(r1_bio); | |
| raid_end_bio_io(r1_bio); | |
| } | |
| } | |
| blk_start_plug(&plug); | |
| for (;;) { | |
| flush_pending_writes(conf); | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| if (list_empty(head)) { | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| break; | |
| } | |
| r1_bio = list_entry(head->prev, struct r1bio, retry_list); | |
| list_del(head->prev); | |
| idx = sector_to_idx(r1_bio->sector); | |
| atomic_dec(&conf->nr_queued[idx]); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| mddev = r1_bio->mddev; | |
| conf = mddev->private; | |
| if (test_bit(R1BIO_IsSync, &r1_bio->state)) { | |
| if (test_bit(R1BIO_MadeGood, &r1_bio->state) || | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| handle_sync_write_finished(conf, r1_bio); | |
| else | |
| sync_request_write(mddev, r1_bio); | |
| } else if (test_bit(R1BIO_MadeGood, &r1_bio->state) || | |
| test_bit(R1BIO_WriteError, &r1_bio->state)) | |
| handle_write_finished(conf, r1_bio); | |
| else if (test_bit(R1BIO_ReadError, &r1_bio->state)) | |
| handle_read_error(conf, r1_bio); | |
| else | |
| WARN_ON_ONCE(1); | |
| cond_resched(); | |
| if (mddev->sb_flags & ~(1<<MD_SB_CHANGE_PENDING)) | |
| md_check_recovery(mddev); | |
| } | |
| blk_finish_plug(&plug); | |
| } | |
| static int init_resync(struct r1conf *conf) | |
| { | |
| int buffs; | |
| buffs = RESYNC_WINDOW / RESYNC_BLOCK_SIZE; | |
| BUG_ON(mempool_initialized(&conf->r1buf_pool)); | |
| return mempool_init(&conf->r1buf_pool, buffs, r1buf_pool_alloc, | |
| r1buf_pool_free, conf->poolinfo); | |
| } | |
| static struct r1bio *raid1_alloc_init_r1buf(struct r1conf *conf) | |
| { | |
| struct r1bio *r1bio = mempool_alloc(&conf->r1buf_pool, GFP_NOIO); | |
| struct resync_pages *rps; | |
| struct bio *bio; | |
| int i; | |
| for (i = conf->poolinfo->raid_disks; i--; ) { | |
| bio = r1bio->bios[i]; | |
| rps = bio->bi_private; | |
| bio_reset(bio, NULL, 0); | |
| bio->bi_private = rps; | |
| } | |
| r1bio->master_bio = NULL; | |
| return r1bio; | |
| } | |
| /* | |
| * perform a "sync" on one "block" | |
| * | |
| * We need to make sure that no normal I/O request - particularly write | |
| * requests - conflict with active sync requests. | |
| * | |
| * This is achieved by tracking pending requests and a 'barrier' concept | |
| * that can be installed to exclude normal IO requests. | |
| */ | |
| static sector_t raid1_sync_request(struct mddev *mddev, sector_t sector_nr, | |
| int *skipped) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| struct r1bio *r1_bio; | |
| struct bio *bio; | |
| sector_t max_sector, nr_sectors; | |
| int disk = -1; | |
| int i; | |
| int wonly = -1; | |
| int write_targets = 0, read_targets = 0; | |
| sector_t sync_blocks; | |
| int still_degraded = 0; | |
| int good_sectors = RESYNC_SECTORS; | |
| int min_bad = 0; /* number of sectors that are bad in all devices */ | |
| int idx = sector_to_idx(sector_nr); | |
| int page_idx = 0; | |
| if (!mempool_initialized(&conf->r1buf_pool)) | |
| if (init_resync(conf)) | |
| return 0; | |
| max_sector = mddev->dev_sectors; | |
| if (sector_nr >= max_sector) { | |
| /* If we aborted, we need to abort the | |
| * sync on the 'current' bitmap chunk (there will | |
| * only be one in raid1 resync. | |
| * We can find the current addess in mddev->curr_resync | |
| */ | |
| if (mddev->curr_resync < max_sector) /* aborted */ | |
| md_bitmap_end_sync(mddev->bitmap, mddev->curr_resync, | |
| &sync_blocks, 1); | |
| else /* completed sync */ | |
| conf->fullsync = 0; | |
| md_bitmap_close_sync(mddev->bitmap); | |
| close_sync(conf); | |
| if (mddev_is_clustered(mddev)) { | |
| conf->cluster_sync_low = 0; | |
| conf->cluster_sync_high = 0; | |
| } | |
| return 0; | |
| } | |
| if (mddev->bitmap == NULL && | |
| mddev->recovery_cp == MaxSector && | |
| !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) && | |
| conf->fullsync == 0) { | |
| *skipped = 1; | |
| return max_sector - sector_nr; | |
| } | |
| /* before building a request, check if we can skip these blocks.. | |
| * This call the bitmap_start_sync doesn't actually record anything | |
| */ | |
| if (!md_bitmap_start_sync(mddev->bitmap, sector_nr, &sync_blocks, 1) && | |
| !conf->fullsync && !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { | |
| /* We can skip this block, and probably several more */ | |
| *skipped = 1; | |
| return sync_blocks; | |
| } | |
| /* | |
| * If there is non-resync activity waiting for a turn, then let it | |
| * though before starting on this new sync request. | |
| */ | |
| if (atomic_read(&conf->nr_waiting[idx])) | |
| schedule_timeout_uninterruptible(1); | |
| /* we are incrementing sector_nr below. To be safe, we check against | |
| * sector_nr + two times RESYNC_SECTORS | |
| */ | |
| md_bitmap_cond_end_sync(mddev->bitmap, sector_nr, | |
| mddev_is_clustered(mddev) && (sector_nr + 2 * RESYNC_SECTORS > conf->cluster_sync_high)); | |
| if (raise_barrier(conf, sector_nr)) | |
| return 0; | |
| r1_bio = raid1_alloc_init_r1buf(conf); | |
| /* | |
| * If we get a correctably read error during resync or recovery, | |
| * we might want to read from a different device. So we | |
| * flag all drives that could conceivably be read from for READ, | |
| * and any others (which will be non-In_sync devices) for WRITE. | |
| * If a read fails, we try reading from something else for which READ | |
| * is OK. | |
| */ | |
| r1_bio->mddev = mddev; | |
| r1_bio->sector = sector_nr; | |
| r1_bio->state = 0; | |
| set_bit(R1BIO_IsSync, &r1_bio->state); | |
| /* make sure good_sectors won't go across barrier unit boundary */ | |
| good_sectors = align_to_barrier_unit_end(sector_nr, good_sectors); | |
| for (i = 0; i < conf->raid_disks * 2; i++) { | |
| struct md_rdev *rdev; | |
| bio = r1_bio->bios[i]; | |
| rdev = conf->mirrors[i].rdev; | |
| if (rdev == NULL || | |
| test_bit(Faulty, &rdev->flags)) { | |
| if (i < conf->raid_disks) | |
| still_degraded = 1; | |
| } else if (!test_bit(In_sync, &rdev->flags)) { | |
| bio->bi_opf = REQ_OP_WRITE; | |
| bio->bi_end_io = end_sync_write; | |
| write_targets ++; | |
| } else { | |
| /* may need to read from here */ | |
| sector_t first_bad = MaxSector; | |
| int bad_sectors; | |
| if (is_badblock(rdev, sector_nr, good_sectors, | |
| &first_bad, &bad_sectors)) { | |
| if (first_bad > sector_nr) | |
| good_sectors = first_bad - sector_nr; | |
| else { | |
| bad_sectors -= (sector_nr - first_bad); | |
| if (min_bad == 0 || | |
| min_bad > bad_sectors) | |
| min_bad = bad_sectors; | |
| } | |
| } | |
| if (sector_nr < first_bad) { | |
| if (test_bit(WriteMostly, &rdev->flags)) { | |
| if (wonly < 0) | |
| wonly = i; | |
| } else { | |
| if (disk < 0) | |
| disk = i; | |
| } | |
| bio->bi_opf = REQ_OP_READ; | |
| bio->bi_end_io = end_sync_read; | |
| read_targets++; | |
| } else if (!test_bit(WriteErrorSeen, &rdev->flags) && | |
| test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && | |
| !test_bit(MD_RECOVERY_CHECK, &mddev->recovery)) { | |
| /* | |
| * The device is suitable for reading (InSync), | |
| * but has bad block(s) here. Let's try to correct them, | |
| * if we are doing resync or repair. Otherwise, leave | |
| * this device alone for this sync request. | |
| */ | |
| bio->bi_opf = REQ_OP_WRITE; | |
| bio->bi_end_io = end_sync_write; | |
| write_targets++; | |
| } | |
| } | |
| if (rdev && bio->bi_end_io) { | |
| atomic_inc(&rdev->nr_pending); | |
| bio->bi_iter.bi_sector = sector_nr + rdev->data_offset; | |
| bio_set_dev(bio, rdev->bdev); | |
| if (test_bit(FailFast, &rdev->flags)) | |
| bio->bi_opf |= MD_FAILFAST; | |
| } | |
| } | |
| if (disk < 0) | |
| disk = wonly; | |
| r1_bio->read_disk = disk; | |
| if (read_targets == 0 && min_bad > 0) { | |
| /* These sectors are bad on all InSync devices, so we | |
| * need to mark them bad on all write targets | |
| */ | |
| int ok = 1; | |
| for (i = 0 ; i < conf->raid_disks * 2 ; i++) | |
| if (r1_bio->bios[i]->bi_end_io == end_sync_write) { | |
| struct md_rdev *rdev = conf->mirrors[i].rdev; | |
| ok = rdev_set_badblocks(rdev, sector_nr, | |
| min_bad, 0 | |
| ) && ok; | |
| } | |
| set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags); | |
| *skipped = 1; | |
| put_buf(r1_bio); | |
| if (!ok) { | |
| /* Cannot record the badblocks, so need to | |
| * abort the resync. | |
| * If there are multiple read targets, could just | |
| * fail the really bad ones ??? | |
| */ | |
| conf->recovery_disabled = mddev->recovery_disabled; | |
| set_bit(MD_RECOVERY_INTR, &mddev->recovery); | |
| return 0; | |
| } else | |
| return min_bad; | |
| } | |
| if (min_bad > 0 && min_bad < good_sectors) { | |
| /* only resync enough to reach the next bad->good | |
| * transition */ | |
| good_sectors = min_bad; | |
| } | |
| if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) && read_targets > 0) | |
| /* extra read targets are also write targets */ | |
| write_targets += read_targets-1; | |
| if (write_targets == 0 || read_targets == 0) { | |
| /* There is nowhere to write, so all non-sync | |
| * drives must be failed - so we are finished | |
| */ | |
| sector_t rv; | |
| if (min_bad > 0) | |
| max_sector = sector_nr + min_bad; | |
| rv = max_sector - sector_nr; | |
| *skipped = 1; | |
| put_buf(r1_bio); | |
| return rv; | |
| } | |
| if (max_sector > mddev->resync_max) | |
| max_sector = mddev->resync_max; /* Don't do IO beyond here */ | |
| if (max_sector > sector_nr + good_sectors) | |
| max_sector = sector_nr + good_sectors; | |
| nr_sectors = 0; | |
| sync_blocks = 0; | |
| do { | |
| struct page *page; | |
| int len = PAGE_SIZE; | |
| if (sector_nr + (len>>9) > max_sector) | |
| len = (max_sector - sector_nr) << 9; | |
| if (len == 0) | |
| break; | |
| if (sync_blocks == 0) { | |
| if (!md_bitmap_start_sync(mddev->bitmap, sector_nr, | |
| &sync_blocks, still_degraded) && | |
| !conf->fullsync && | |
| !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) | |
| break; | |
| if ((len >> 9) > sync_blocks) | |
| len = sync_blocks<<9; | |
| } | |
| for (i = 0 ; i < conf->raid_disks * 2; i++) { | |
| struct resync_pages *rp; | |
| bio = r1_bio->bios[i]; | |
| rp = get_resync_pages(bio); | |
| if (bio->bi_end_io) { | |
| page = resync_fetch_page(rp, page_idx); | |
| /* | |
| * won't fail because the vec table is big | |
| * enough to hold all these pages | |
| */ | |
| __bio_add_page(bio, page, len, 0); | |
| } | |
| } | |
| nr_sectors += len>>9; | |
| sector_nr += len>>9; | |
| sync_blocks -= (len>>9); | |
| } while (++page_idx < RESYNC_PAGES); | |
| r1_bio->sectors = nr_sectors; | |
| if (mddev_is_clustered(mddev) && | |
| conf->cluster_sync_high < sector_nr + nr_sectors) { | |
| conf->cluster_sync_low = mddev->curr_resync_completed; | |
| conf->cluster_sync_high = conf->cluster_sync_low + CLUSTER_RESYNC_WINDOW_SECTORS; | |
| /* Send resync message */ | |
| md_cluster_ops->resync_info_update(mddev, | |
| conf->cluster_sync_low, | |
| conf->cluster_sync_high); | |
| } | |
| /* For a user-requested sync, we read all readable devices and do a | |
| * compare | |
| */ | |
| if (test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { | |
| atomic_set(&r1_bio->remaining, read_targets); | |
| for (i = 0; i < conf->raid_disks * 2 && read_targets; i++) { | |
| bio = r1_bio->bios[i]; | |
| if (bio->bi_end_io == end_sync_read) { | |
| read_targets--; | |
| md_sync_acct_bio(bio, nr_sectors); | |
| if (read_targets == 1) | |
| bio->bi_opf &= ~MD_FAILFAST; | |
| submit_bio_noacct(bio); | |
| } | |
| } | |
| } else { | |
| atomic_set(&r1_bio->remaining, 1); | |
| bio = r1_bio->bios[r1_bio->read_disk]; | |
| md_sync_acct_bio(bio, nr_sectors); | |
| if (read_targets == 1) | |
| bio->bi_opf &= ~MD_FAILFAST; | |
| submit_bio_noacct(bio); | |
| } | |
| return nr_sectors; | |
| } | |
| static sector_t raid1_size(struct mddev *mddev, sector_t sectors, int raid_disks) | |
| { | |
| if (sectors) | |
| return sectors; | |
| return mddev->dev_sectors; | |
| } | |
| static struct r1conf *setup_conf(struct mddev *mddev) | |
| { | |
| struct r1conf *conf; | |
| int i; | |
| struct raid1_info *disk; | |
| struct md_rdev *rdev; | |
| int err = -ENOMEM; | |
| conf = kzalloc(sizeof(struct r1conf), GFP_KERNEL); | |
| if (!conf) | |
| goto abort; | |
| conf->nr_pending = kcalloc(BARRIER_BUCKETS_NR, | |
| sizeof(atomic_t), GFP_KERNEL); | |
| if (!conf->nr_pending) | |
| goto abort; | |
| conf->nr_waiting = kcalloc(BARRIER_BUCKETS_NR, | |
| sizeof(atomic_t), GFP_KERNEL); | |
| if (!conf->nr_waiting) | |
| goto abort; | |
| conf->nr_queued = kcalloc(BARRIER_BUCKETS_NR, | |
| sizeof(atomic_t), GFP_KERNEL); | |
| if (!conf->nr_queued) | |
| goto abort; | |
| conf->barrier = kcalloc(BARRIER_BUCKETS_NR, | |
| sizeof(atomic_t), GFP_KERNEL); | |
| if (!conf->barrier) | |
| goto abort; | |
| conf->mirrors = kzalloc(array3_size(sizeof(struct raid1_info), | |
| mddev->raid_disks, 2), | |
| GFP_KERNEL); | |
| if (!conf->mirrors) | |
| goto abort; | |
| conf->tmppage = alloc_page(GFP_KERNEL); | |
| if (!conf->tmppage) | |
| goto abort; | |
| conf->poolinfo = kzalloc(sizeof(*conf->poolinfo), GFP_KERNEL); | |
| if (!conf->poolinfo) | |
| goto abort; | |
| conf->poolinfo->raid_disks = mddev->raid_disks * 2; | |
| err = mempool_init(&conf->r1bio_pool, NR_RAID_BIOS, r1bio_pool_alloc, | |
| rbio_pool_free, conf->poolinfo); | |
| if (err) | |
| goto abort; | |
| err = bioset_init(&conf->bio_split, BIO_POOL_SIZE, 0, 0); | |
| if (err) | |
| goto abort; | |
| conf->poolinfo->mddev = mddev; | |
| err = -EINVAL; | |
| spin_lock_init(&conf->device_lock); | |
| rdev_for_each(rdev, mddev) { | |
| int disk_idx = rdev->raid_disk; | |
| if (disk_idx >= mddev->raid_disks | |
| || disk_idx < 0) | |
| continue; | |
| if (test_bit(Replacement, &rdev->flags)) | |
| disk = conf->mirrors + mddev->raid_disks + disk_idx; | |
| else | |
| disk = conf->mirrors + disk_idx; | |
| if (disk->rdev) | |
| goto abort; | |
| disk->rdev = rdev; | |
| disk->head_position = 0; | |
| disk->seq_start = MaxSector; | |
| } | |
| conf->raid_disks = mddev->raid_disks; | |
| conf->mddev = mddev; | |
| INIT_LIST_HEAD(&conf->retry_list); | |
| INIT_LIST_HEAD(&conf->bio_end_io_list); | |
| spin_lock_init(&conf->resync_lock); | |
| init_waitqueue_head(&conf->wait_barrier); | |
| bio_list_init(&conf->pending_bio_list); | |
| conf->recovery_disabled = mddev->recovery_disabled - 1; | |
| err = -EIO; | |
| for (i = 0; i < conf->raid_disks * 2; i++) { | |
| disk = conf->mirrors + i; | |
| if (i < conf->raid_disks && | |
| disk[conf->raid_disks].rdev) { | |
| /* This slot has a replacement. */ | |
| if (!disk->rdev) { | |
| /* No original, just make the replacement | |
| * a recovering spare | |
| */ | |
| disk->rdev = | |
| disk[conf->raid_disks].rdev; | |
| disk[conf->raid_disks].rdev = NULL; | |
| } else if (!test_bit(In_sync, &disk->rdev->flags)) | |
| /* Original is not in_sync - bad */ | |
| goto abort; | |
| } | |
| if (!disk->rdev || | |
| !test_bit(In_sync, &disk->rdev->flags)) { | |
| disk->head_position = 0; | |
| if (disk->rdev && | |
| (disk->rdev->saved_raid_disk < 0)) | |
| conf->fullsync = 1; | |
| } | |
| } | |
| err = -ENOMEM; | |
| rcu_assign_pointer(conf->thread, | |
| md_register_thread(raid1d, mddev, "raid1")); | |
| if (!conf->thread) | |
| goto abort; | |
| return conf; | |
| abort: | |
| if (conf) { | |
| mempool_exit(&conf->r1bio_pool); | |
| kfree(conf->mirrors); | |
| safe_put_page(conf->tmppage); | |
| kfree(conf->poolinfo); | |
| kfree(conf->nr_pending); | |
| kfree(conf->nr_waiting); | |
| kfree(conf->nr_queued); | |
| kfree(conf->barrier); | |
| bioset_exit(&conf->bio_split); | |
| kfree(conf); | |
| } | |
| return ERR_PTR(err); | |
| } | |
| static void raid1_free(struct mddev *mddev, void *priv); | |
| static int raid1_run(struct mddev *mddev) | |
| { | |
| struct r1conf *conf; | |
| int i; | |
| struct md_rdev *rdev; | |
| int ret; | |
| if (mddev->level != 1) { | |
| pr_warn("md/raid1:%s: raid level not set to mirroring (%d)\n", | |
| mdname(mddev), mddev->level); | |
| return -EIO; | |
| } | |
| if (mddev->reshape_position != MaxSector) { | |
| pr_warn("md/raid1:%s: reshape_position set but not supported\n", | |
| mdname(mddev)); | |
| return -EIO; | |
| } | |
| /* | |
| * copy the already verified devices into our private RAID1 | |
| * bookkeeping area. [whatever we allocate in run(), | |
| * should be freed in raid1_free()] | |
| */ | |
| if (mddev->private == NULL) | |
| conf = setup_conf(mddev); | |
| else | |
| conf = mddev->private; | |
| if (IS_ERR(conf)) | |
| return PTR_ERR(conf); | |
| if (mddev->queue) | |
| blk_queue_max_write_zeroes_sectors(mddev->queue, 0); | |
| rdev_for_each(rdev, mddev) { | |
| if (!mddev->gendisk) | |
| continue; | |
| disk_stack_limits(mddev->gendisk, rdev->bdev, | |
| rdev->data_offset << 9); | |
| } | |
| mddev->degraded = 0; | |
| for (i = 0; i < conf->raid_disks; i++) | |
| if (conf->mirrors[i].rdev == NULL || | |
| !test_bit(In_sync, &conf->mirrors[i].rdev->flags) || | |
| test_bit(Faulty, &conf->mirrors[i].rdev->flags)) | |
| mddev->degraded++; | |
| /* | |
| * RAID1 needs at least one disk in active | |
| */ | |
| if (conf->raid_disks - mddev->degraded < 1) { | |
| md_unregister_thread(mddev, &conf->thread); | |
| ret = -EINVAL; | |
| goto abort; | |
| } | |
| if (conf->raid_disks - mddev->degraded == 1) | |
| mddev->recovery_cp = MaxSector; | |
| if (mddev->recovery_cp != MaxSector) | |
| pr_info("md/raid1:%s: not clean -- starting background reconstruction\n", | |
| mdname(mddev)); | |
| pr_info("md/raid1:%s: active with %d out of %d mirrors\n", | |
| mdname(mddev), mddev->raid_disks - mddev->degraded, | |
| mddev->raid_disks); | |
| /* | |
| * Ok, everything is just fine now | |
| */ | |
| rcu_assign_pointer(mddev->thread, conf->thread); | |
| rcu_assign_pointer(conf->thread, NULL); | |
| mddev->private = conf; | |
| set_bit(MD_FAILFAST_SUPPORTED, &mddev->flags); | |
| md_set_array_sectors(mddev, raid1_size(mddev, 0, 0)); | |
| ret = md_integrity_register(mddev); | |
| if (ret) { | |
| md_unregister_thread(mddev, &mddev->thread); | |
| goto abort; | |
| } | |
| return 0; | |
| abort: | |
| raid1_free(mddev, conf); | |
| return ret; | |
| } | |
| static void raid1_free(struct mddev *mddev, void *priv) | |
| { | |
| struct r1conf *conf = priv; | |
| mempool_exit(&conf->r1bio_pool); | |
| kfree(conf->mirrors); | |
| safe_put_page(conf->tmppage); | |
| kfree(conf->poolinfo); | |
| kfree(conf->nr_pending); | |
| kfree(conf->nr_waiting); | |
| kfree(conf->nr_queued); | |
| kfree(conf->barrier); | |
| bioset_exit(&conf->bio_split); | |
| kfree(conf); | |
| } | |
| static int raid1_resize(struct mddev *mddev, sector_t sectors) | |
| { | |
| /* no resync is happening, and there is enough space | |
| * on all devices, so we can resize. | |
| * We need to make sure resync covers any new space. | |
| * If the array is shrinking we should possibly wait until | |
| * any io in the removed space completes, but it hardly seems | |
| * worth it. | |
| */ | |
| sector_t newsize = raid1_size(mddev, sectors, 0); | |
| if (mddev->external_size && | |
| mddev->array_sectors > newsize) | |
| return -EINVAL; | |
| if (mddev->bitmap) { | |
| int ret = md_bitmap_resize(mddev->bitmap, newsize, 0, 0); | |
| if (ret) | |
| return ret; | |
| } | |
| md_set_array_sectors(mddev, newsize); | |
| if (sectors > mddev->dev_sectors && | |
| mddev->recovery_cp > mddev->dev_sectors) { | |
| mddev->recovery_cp = mddev->dev_sectors; | |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); | |
| } | |
| mddev->dev_sectors = sectors; | |
| mddev->resync_max_sectors = sectors; | |
| return 0; | |
| } | |
| static int raid1_reshape(struct mddev *mddev) | |
| { | |
| /* We need to: | |
| * 1/ resize the r1bio_pool | |
| * 2/ resize conf->mirrors | |
| * | |
| * We allocate a new r1bio_pool if we can. | |
| * Then raise a device barrier and wait until all IO stops. | |
| * Then resize conf->mirrors and swap in the new r1bio pool. | |
| * | |
| * At the same time, we "pack" the devices so that all the missing | |
| * devices have the higher raid_disk numbers. | |
| */ | |
| mempool_t newpool, oldpool; | |
| struct pool_info *newpoolinfo; | |
| struct raid1_info *newmirrors; | |
| struct r1conf *conf = mddev->private; | |
| int cnt, raid_disks; | |
| unsigned long flags; | |
| int d, d2; | |
| int ret; | |
| memset(&newpool, 0, sizeof(newpool)); | |
| memset(&oldpool, 0, sizeof(oldpool)); | |
| /* Cannot change chunk_size, layout, or level */ | |
| if (mddev->chunk_sectors != mddev->new_chunk_sectors || | |
| mddev->layout != mddev->new_layout || | |
| mddev->level != mddev->new_level) { | |
| mddev->new_chunk_sectors = mddev->chunk_sectors; | |
| mddev->new_layout = mddev->layout; | |
| mddev->new_level = mddev->level; | |
| return -EINVAL; | |
| } | |
| if (!mddev_is_clustered(mddev)) | |
| md_allow_write(mddev); | |
| raid_disks = mddev->raid_disks + mddev->delta_disks; | |
| if (raid_disks < conf->raid_disks) { | |
| cnt=0; | |
| for (d= 0; d < conf->raid_disks; d++) | |
| if (conf->mirrors[d].rdev) | |
| cnt++; | |
| if (cnt > raid_disks) | |
| return -EBUSY; | |
| } | |
| newpoolinfo = kmalloc(sizeof(*newpoolinfo), GFP_KERNEL); | |
| if (!newpoolinfo) | |
| return -ENOMEM; | |
| newpoolinfo->mddev = mddev; | |
| newpoolinfo->raid_disks = raid_disks * 2; | |
| ret = mempool_init(&newpool, NR_RAID_BIOS, r1bio_pool_alloc, | |
| rbio_pool_free, newpoolinfo); | |
| if (ret) { | |
| kfree(newpoolinfo); | |
| return ret; | |
| } | |
| newmirrors = kzalloc(array3_size(sizeof(struct raid1_info), | |
| raid_disks, 2), | |
| GFP_KERNEL); | |
| if (!newmirrors) { | |
| kfree(newpoolinfo); | |
| mempool_exit(&newpool); | |
| return -ENOMEM; | |
| } | |
| freeze_array(conf, 0); | |
| /* ok, everything is stopped */ | |
| oldpool = conf->r1bio_pool; | |
| conf->r1bio_pool = newpool; | |
| for (d = d2 = 0; d < conf->raid_disks; d++) { | |
| struct md_rdev *rdev = conf->mirrors[d].rdev; | |
| if (rdev && rdev->raid_disk != d2) { | |
| sysfs_unlink_rdev(mddev, rdev); | |
| rdev->raid_disk = d2; | |
| sysfs_unlink_rdev(mddev, rdev); | |
| if (sysfs_link_rdev(mddev, rdev)) | |
| pr_warn("md/raid1:%s: cannot register rd%d\n", | |
| mdname(mddev), rdev->raid_disk); | |
| } | |
| if (rdev) | |
| newmirrors[d2++].rdev = rdev; | |
| } | |
| kfree(conf->mirrors); | |
| conf->mirrors = newmirrors; | |
| kfree(conf->poolinfo); | |
| conf->poolinfo = newpoolinfo; | |
| spin_lock_irqsave(&conf->device_lock, flags); | |
| mddev->degraded += (raid_disks - conf->raid_disks); | |
| spin_unlock_irqrestore(&conf->device_lock, flags); | |
| conf->raid_disks = mddev->raid_disks = raid_disks; | |
| mddev->delta_disks = 0; | |
| unfreeze_array(conf); | |
| set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); | |
| set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); | |
| md_wakeup_thread(mddev->thread); | |
| mempool_exit(&oldpool); | |
| return 0; | |
| } | |
| static void raid1_quiesce(struct mddev *mddev, int quiesce) | |
| { | |
| struct r1conf *conf = mddev->private; | |
| if (quiesce) | |
| freeze_array(conf, 0); | |
| else | |
| unfreeze_array(conf); | |
| } | |
| static void *raid1_takeover(struct mddev *mddev) | |
| { | |
| /* raid1 can take over: | |
| * raid5 with 2 devices, any layout or chunk size | |
| */ | |
| if (mddev->level == 5 && mddev->raid_disks == 2) { | |
| struct r1conf *conf; | |
| mddev->new_level = 1; | |
| mddev->new_layout = 0; | |
| mddev->new_chunk_sectors = 0; | |
| conf = setup_conf(mddev); | |
| if (!IS_ERR(conf)) { | |
| /* Array must appear to be quiesced */ | |
| conf->array_frozen = 1; | |
| mddev_clear_unsupported_flags(mddev, | |
| UNSUPPORTED_MDDEV_FLAGS); | |
| } | |
| return conf; | |
| } | |
| return ERR_PTR(-EINVAL); | |
| } | |
| static struct md_personality raid1_personality = | |
| { | |
| .name = "raid1", | |
| .level = 1, | |
| .owner = THIS_MODULE, | |
| .make_request = raid1_make_request, | |
| .run = raid1_run, | |
| .free = raid1_free, | |
| .status = raid1_status, | |
| .error_handler = raid1_error, | |
| .hot_add_disk = raid1_add_disk, | |
| .hot_remove_disk= raid1_remove_disk, | |
| .spare_active = raid1_spare_active, | |
| .sync_request = raid1_sync_request, | |
| .resize = raid1_resize, | |
| .size = raid1_size, | |
| .check_reshape = raid1_reshape, | |
| .quiesce = raid1_quiesce, | |
| .takeover = raid1_takeover, | |
| }; | |
| static int __init raid_init(void) | |
| { | |
| return register_md_personality(&raid1_personality); | |
| } | |
| static void raid_exit(void) | |
| { | |
| unregister_md_personality(&raid1_personality); | |
| } | |
| module_init(raid_init); | |
| module_exit(raid_exit); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_DESCRIPTION("RAID1 (mirroring) personality for MD"); | |
| MODULE_ALIAS("md-personality-3"); /* RAID1 */ | |
| MODULE_ALIAS("md-raid1"); | |
| MODULE_ALIAS("md-level-1"); |