| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Copyright (C) 2012 Freescale Semiconductor, Inc. | |
| * | |
| * Copyright (C) 2014 Linaro. | |
| * Viresh Kumar <viresh.kumar@linaro.org> | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/clk.h> | |
| #include <linux/cpu.h> | |
| #include <linux/cpufreq.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/err.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/of.h> | |
| #include <linux/pm_opp.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/slab.h> | |
| #include <linux/thermal.h> | |
| #include "cpufreq-dt.h" | |
| struct private_data { | |
| struct list_head node; | |
| cpumask_var_t cpus; | |
| struct device *cpu_dev; | |
| struct cpufreq_frequency_table *freq_table; | |
| bool have_static_opps; | |
| int opp_token; | |
| }; | |
| static LIST_HEAD(priv_list); | |
| static struct freq_attr *cpufreq_dt_attr[] = { | |
| &cpufreq_freq_attr_scaling_available_freqs, | |
| NULL, /* Extra space for boost-attr if required */ | |
| NULL, | |
| }; | |
| static struct private_data *cpufreq_dt_find_data(int cpu) | |
| { | |
| struct private_data *priv; | |
| list_for_each_entry(priv, &priv_list, node) { | |
| if (cpumask_test_cpu(cpu, priv->cpus)) | |
| return priv; | |
| } | |
| return NULL; | |
| } | |
| static int set_target(struct cpufreq_policy *policy, unsigned int index) | |
| { | |
| struct private_data *priv = policy->driver_data; | |
| unsigned long freq = policy->freq_table[index].frequency; | |
| return dev_pm_opp_set_rate(priv->cpu_dev, freq * 1000); | |
| } | |
| /* | |
| * An earlier version of opp-v1 bindings used to name the regulator | |
| * "cpu0-supply", we still need to handle that for backwards compatibility. | |
| */ | |
| static const char *find_supply_name(struct device *dev) | |
| { | |
| struct device_node *np; | |
| struct property *pp; | |
| int cpu = dev->id; | |
| const char *name = NULL; | |
| np = of_node_get(dev->of_node); | |
| /* This must be valid for sure */ | |
| if (WARN_ON(!np)) | |
| return NULL; | |
| /* Try "cpu0" for older DTs */ | |
| if (!cpu) { | |
| pp = of_find_property(np, "cpu0-supply", NULL); | |
| if (pp) { | |
| name = "cpu0"; | |
| goto node_put; | |
| } | |
| } | |
| pp = of_find_property(np, "cpu-supply", NULL); | |
| if (pp) { | |
| name = "cpu"; | |
| goto node_put; | |
| } | |
| dev_dbg(dev, "no regulator for cpu%d\n", cpu); | |
| node_put: | |
| of_node_put(np); | |
| return name; | |
| } | |
| static int cpufreq_init(struct cpufreq_policy *policy) | |
| { | |
| struct private_data *priv; | |
| struct device *cpu_dev; | |
| struct clk *cpu_clk; | |
| unsigned int transition_latency; | |
| int ret; | |
| priv = cpufreq_dt_find_data(policy->cpu); | |
| if (!priv) { | |
| pr_err("failed to find data for cpu%d\n", policy->cpu); | |
| return -ENODEV; | |
| } | |
| cpu_dev = priv->cpu_dev; | |
| cpu_clk = clk_get(cpu_dev, NULL); | |
| if (IS_ERR(cpu_clk)) { | |
| ret = PTR_ERR(cpu_clk); | |
| dev_err(cpu_dev, "%s: failed to get clk: %d\n", __func__, ret); | |
| return ret; | |
| } | |
| transition_latency = dev_pm_opp_get_max_transition_latency(cpu_dev); | |
| if (!transition_latency) | |
| transition_latency = CPUFREQ_ETERNAL; | |
| cpumask_copy(policy->cpus, priv->cpus); | |
| policy->driver_data = priv; | |
| policy->clk = cpu_clk; | |
| policy->freq_table = priv->freq_table; | |
| policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000; | |
| policy->cpuinfo.transition_latency = transition_latency; | |
| policy->dvfs_possible_from_any_cpu = true; | |
| /* Support turbo/boost mode */ | |
| if (policy_has_boost_freq(policy)) { | |
| /* This gets disabled by core on driver unregister */ | |
| ret = cpufreq_enable_boost_support(); | |
| if (ret) | |
| goto out_clk_put; | |
| cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs; | |
| } | |
| return 0; | |
| out_clk_put: | |
| clk_put(cpu_clk); | |
| return ret; | |
| } | |
| static int cpufreq_online(struct cpufreq_policy *policy) | |
| { | |
| /* We did light-weight tear down earlier, nothing to do here */ | |
| return 0; | |
| } | |
| static int cpufreq_offline(struct cpufreq_policy *policy) | |
| { | |
| /* | |
| * Preserve policy->driver_data and don't free resources on light-weight | |
| * tear down. | |
| */ | |
| return 0; | |
| } | |
| static int cpufreq_exit(struct cpufreq_policy *policy) | |
| { | |
| clk_put(policy->clk); | |
| return 0; | |
| } | |
| static struct cpufreq_driver dt_cpufreq_driver = { | |
| .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | | |
| CPUFREQ_IS_COOLING_DEV, | |
| .verify = cpufreq_generic_frequency_table_verify, | |
| .target_index = set_target, | |
| .get = cpufreq_generic_get, | |
| .init = cpufreq_init, | |
| .exit = cpufreq_exit, | |
| .online = cpufreq_online, | |
| .offline = cpufreq_offline, | |
| .register_em = cpufreq_register_em_with_opp, | |
| .name = "cpufreq-dt", | |
| .attr = cpufreq_dt_attr, | |
| .suspend = cpufreq_generic_suspend, | |
| }; | |
| static int dt_cpufreq_early_init(struct device *dev, int cpu) | |
| { | |
| struct private_data *priv; | |
| struct device *cpu_dev; | |
| bool fallback = false; | |
| const char *reg_name[] = { NULL, NULL }; | |
| int ret; | |
| /* Check if this CPU is already covered by some other policy */ | |
| if (cpufreq_dt_find_data(cpu)) | |
| return 0; | |
| cpu_dev = get_cpu_device(cpu); | |
| if (!cpu_dev) | |
| return -EPROBE_DEFER; | |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| if (!alloc_cpumask_var(&priv->cpus, GFP_KERNEL)) | |
| return -ENOMEM; | |
| cpumask_set_cpu(cpu, priv->cpus); | |
| priv->cpu_dev = cpu_dev; | |
| /* | |
| * OPP layer will be taking care of regulators now, but it needs to know | |
| * the name of the regulator first. | |
| */ | |
| reg_name[0] = find_supply_name(cpu_dev); | |
| if (reg_name[0]) { | |
| priv->opp_token = dev_pm_opp_set_regulators(cpu_dev, reg_name); | |
| if (priv->opp_token < 0) { | |
| ret = dev_err_probe(cpu_dev, priv->opp_token, | |
| "failed to set regulators\n"); | |
| goto free_cpumask; | |
| } | |
| } | |
| /* Get OPP-sharing information from "operating-points-v2" bindings */ | |
| ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, priv->cpus); | |
| if (ret) { | |
| if (ret != -ENOENT) | |
| goto out; | |
| /* | |
| * operating-points-v2 not supported, fallback to all CPUs share | |
| * OPP for backward compatibility if the platform hasn't set | |
| * sharing CPUs. | |
| */ | |
| if (dev_pm_opp_get_sharing_cpus(cpu_dev, priv->cpus)) | |
| fallback = true; | |
| } | |
| /* | |
| * Initialize OPP tables for all priv->cpus. They will be shared by | |
| * all CPUs which have marked their CPUs shared with OPP bindings. | |
| * | |
| * For platforms not using operating-points-v2 bindings, we do this | |
| * before updating priv->cpus. Otherwise, we will end up creating | |
| * duplicate OPPs for the CPUs. | |
| * | |
| * OPPs might be populated at runtime, don't fail for error here unless | |
| * it is -EPROBE_DEFER. | |
| */ | |
| ret = dev_pm_opp_of_cpumask_add_table(priv->cpus); | |
| if (!ret) { | |
| priv->have_static_opps = true; | |
| } else if (ret == -EPROBE_DEFER) { | |
| goto out; | |
| } | |
| /* | |
| * The OPP table must be initialized, statically or dynamically, by this | |
| * point. | |
| */ | |
| ret = dev_pm_opp_get_opp_count(cpu_dev); | |
| if (ret <= 0) { | |
| dev_err(cpu_dev, "OPP table can't be empty\n"); | |
| ret = -ENODEV; | |
| goto out; | |
| } | |
| if (fallback) { | |
| cpumask_setall(priv->cpus); | |
| ret = dev_pm_opp_set_sharing_cpus(cpu_dev, priv->cpus); | |
| if (ret) | |
| dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n", | |
| __func__, ret); | |
| } | |
| ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &priv->freq_table); | |
| if (ret) { | |
| dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret); | |
| goto out; | |
| } | |
| list_add(&priv->node, &priv_list); | |
| return 0; | |
| out: | |
| if (priv->have_static_opps) | |
| dev_pm_opp_of_cpumask_remove_table(priv->cpus); | |
| dev_pm_opp_put_regulators(priv->opp_token); | |
| free_cpumask: | |
| free_cpumask_var(priv->cpus); | |
| return ret; | |
| } | |
| static void dt_cpufreq_release(void) | |
| { | |
| struct private_data *priv, *tmp; | |
| list_for_each_entry_safe(priv, tmp, &priv_list, node) { | |
| dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &priv->freq_table); | |
| if (priv->have_static_opps) | |
| dev_pm_opp_of_cpumask_remove_table(priv->cpus); | |
| dev_pm_opp_put_regulators(priv->opp_token); | |
| free_cpumask_var(priv->cpus); | |
| list_del(&priv->node); | |
| } | |
| } | |
| static int dt_cpufreq_probe(struct platform_device *pdev) | |
| { | |
| struct cpufreq_dt_platform_data *data = dev_get_platdata(&pdev->dev); | |
| int ret, cpu; | |
| /* Request resources early so we can return in case of -EPROBE_DEFER */ | |
| for_each_possible_cpu(cpu) { | |
| ret = dt_cpufreq_early_init(&pdev->dev, cpu); | |
| if (ret) | |
| goto err; | |
| } | |
| if (data) { | |
| if (data->have_governor_per_policy) | |
| dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY; | |
| dt_cpufreq_driver.resume = data->resume; | |
| if (data->suspend) | |
| dt_cpufreq_driver.suspend = data->suspend; | |
| if (data->get_intermediate) { | |
| dt_cpufreq_driver.target_intermediate = data->target_intermediate; | |
| dt_cpufreq_driver.get_intermediate = data->get_intermediate; | |
| } | |
| } | |
| ret = cpufreq_register_driver(&dt_cpufreq_driver); | |
| if (ret) { | |
| dev_err(&pdev->dev, "failed register driver: %d\n", ret); | |
| goto err; | |
| } | |
| return 0; | |
| err: | |
| dt_cpufreq_release(); | |
| return ret; | |
| } | |
| static void dt_cpufreq_remove(struct platform_device *pdev) | |
| { | |
| cpufreq_unregister_driver(&dt_cpufreq_driver); | |
| dt_cpufreq_release(); | |
| } | |
| static struct platform_driver dt_cpufreq_platdrv = { | |
| .driver = { | |
| .name = "cpufreq-dt", | |
| }, | |
| .probe = dt_cpufreq_probe, | |
| .remove_new = dt_cpufreq_remove, | |
| }; | |
| module_platform_driver(dt_cpufreq_platdrv); | |
| MODULE_ALIAS("platform:cpufreq-dt"); | |
| MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>"); | |
| MODULE_AUTHOR("Shawn Guo <shawn.guo@linaro.org>"); | |
| MODULE_DESCRIPTION("Generic cpufreq driver"); | |
| MODULE_LICENSE("GPL"); |