| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * drivers/extcon/extcon-tusb320.c - TUSB320 extcon driver | |
| * | |
| * Copyright (C) 2020 National Instruments Corporation | |
| * Author: Michael Auchter <michael.auchter@ni.com> | |
| */ | |
| #include <linux/bitfield.h> | |
| #include <linux/extcon-provider.h> | |
| #include <linux/i2c.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/regmap.h> | |
| #include <linux/usb/typec.h> | |
| #include <linux/usb/typec_altmode.h> | |
| #include <linux/usb/role.h> | |
| #include <linux/irq.h> | |
| #define TUSB320_REG8 0x8 | |
| #define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6) | |
| #define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0 | |
| #define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1 | |
| #define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2 | |
| #define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4) | |
| #define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0 | |
| #define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1 | |
| #define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2 | |
| #define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3 | |
| #define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 1) | |
| #define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0 | |
| #define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4 | |
| #define TUSB320_REG8_ACCESSORY_CONNECTED_ACHRG 0x5 | |
| #define TUSB320_REG8_ACCESSORY_CONNECTED_DBGDFP 0x6 | |
| #define TUSB320_REG8_ACCESSORY_CONNECTED_DBGUFP 0x7 | |
| #define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0) | |
| #define TUSB320_REG9 0x9 | |
| #define TUSB320_REG9_ATTACHED_STATE GENMASK(7, 6) | |
| #define TUSB320_REG9_CABLE_DIRECTION BIT(5) | |
| #define TUSB320_REG9_INTERRUPT_STATUS BIT(4) | |
| #define TUSB320_REGA 0xa | |
| #define TUSB320L_REGA_DISABLE_TERM BIT(0) | |
| #define TUSB320_REGA_I2C_SOFT_RESET BIT(3) | |
| #define TUSB320_REGA_MODE_SELECT_SHIFT 4 | |
| #define TUSB320_REGA_MODE_SELECT_MASK 0x3 | |
| #define TUSB320L_REGA0_REVISION 0xa0 | |
| enum tusb320_attached_state { | |
| TUSB320_ATTACHED_STATE_NONE, | |
| TUSB320_ATTACHED_STATE_DFP, | |
| TUSB320_ATTACHED_STATE_UFP, | |
| TUSB320_ATTACHED_STATE_ACC, | |
| }; | |
| enum tusb320_mode { | |
| TUSB320_MODE_PORT, | |
| TUSB320_MODE_UFP, | |
| TUSB320_MODE_DFP, | |
| TUSB320_MODE_DRP, | |
| }; | |
| struct tusb320_priv; | |
| struct tusb320_ops { | |
| int (*set_mode)(struct tusb320_priv *priv, enum tusb320_mode mode); | |
| int (*get_revision)(struct tusb320_priv *priv, unsigned int *revision); | |
| }; | |
| struct tusb320_priv { | |
| struct device *dev; | |
| struct regmap *regmap; | |
| struct extcon_dev *edev; | |
| struct tusb320_ops *ops; | |
| enum tusb320_attached_state state; | |
| struct typec_port *port; | |
| struct typec_capability cap; | |
| enum typec_port_type port_type; | |
| enum typec_pwr_opmode pwr_opmode; | |
| struct fwnode_handle *connector_fwnode; | |
| struct usb_role_switch *role_sw; | |
| }; | |
| static const char * const tusb_attached_states[] = { | |
| [TUSB320_ATTACHED_STATE_NONE] = "not attached", | |
| [TUSB320_ATTACHED_STATE_DFP] = "downstream facing port", | |
| [TUSB320_ATTACHED_STATE_UFP] = "upstream facing port", | |
| [TUSB320_ATTACHED_STATE_ACC] = "accessory", | |
| }; | |
| static const unsigned int tusb320_extcon_cable[] = { | |
| EXTCON_USB, | |
| EXTCON_USB_HOST, | |
| EXTCON_NONE, | |
| }; | |
| static int tusb320_check_signature(struct tusb320_priv *priv) | |
| { | |
| static const char sig[] = { '\0', 'T', 'U', 'S', 'B', '3', '2', '0' }; | |
| unsigned val; | |
| int i, ret; | |
| for (i = 0; i < sizeof(sig); i++) { | |
| ret = regmap_read(priv->regmap, sizeof(sig) - 1 - i, &val); | |
| if (ret < 0) | |
| return ret; | |
| if (val != sig[i]) { | |
| dev_err(priv->dev, "signature mismatch!\n"); | |
| return -ENODEV; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int tusb320_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode) | |
| { | |
| int ret; | |
| /* Mode cannot be changed while cable is attached */ | |
| if (priv->state != TUSB320_ATTACHED_STATE_NONE) | |
| return -EBUSY; | |
| /* Write mode */ | |
| ret = regmap_write_bits(priv->regmap, TUSB320_REGA, | |
| TUSB320_REGA_MODE_SELECT_MASK << TUSB320_REGA_MODE_SELECT_SHIFT, | |
| mode << TUSB320_REGA_MODE_SELECT_SHIFT); | |
| if (ret) { | |
| dev_err(priv->dev, "failed to write mode: %d\n", ret); | |
| return ret; | |
| } | |
| return 0; | |
| } | |
| static int tusb320l_set_mode(struct tusb320_priv *priv, enum tusb320_mode mode) | |
| { | |
| int ret; | |
| /* Disable CC state machine */ | |
| ret = regmap_write_bits(priv->regmap, TUSB320_REGA, | |
| TUSB320L_REGA_DISABLE_TERM, 1); | |
| if (ret) { | |
| dev_err(priv->dev, | |
| "failed to disable CC state machine: %d\n", ret); | |
| return ret; | |
| } | |
| /* Write mode */ | |
| ret = regmap_write_bits(priv->regmap, TUSB320_REGA, | |
| TUSB320_REGA_MODE_SELECT_MASK << TUSB320_REGA_MODE_SELECT_SHIFT, | |
| mode << TUSB320_REGA_MODE_SELECT_SHIFT); | |
| if (ret) { | |
| dev_err(priv->dev, "failed to write mode: %d\n", ret); | |
| goto err; | |
| } | |
| msleep(5); | |
| err: | |
| /* Re-enable CC state machine */ | |
| ret = regmap_write_bits(priv->regmap, TUSB320_REGA, | |
| TUSB320L_REGA_DISABLE_TERM, 0); | |
| if (ret) | |
| dev_err(priv->dev, | |
| "failed to re-enable CC state machine: %d\n", ret); | |
| return ret; | |
| } | |
| static int tusb320_reset(struct tusb320_priv *priv) | |
| { | |
| int ret; | |
| /* Set mode to default (follow PORT pin) */ | |
| ret = priv->ops->set_mode(priv, TUSB320_MODE_PORT); | |
| if (ret && ret != -EBUSY) { | |
| dev_err(priv->dev, | |
| "failed to set mode to PORT: %d\n", ret); | |
| return ret; | |
| } | |
| /* Perform soft reset */ | |
| ret = regmap_write_bits(priv->regmap, TUSB320_REGA, | |
| TUSB320_REGA_I2C_SOFT_RESET, 1); | |
| if (ret) { | |
| dev_err(priv->dev, | |
| "failed to write soft reset bit: %d\n", ret); | |
| return ret; | |
| } | |
| /* Wait for chip to go through reset */ | |
| msleep(95); | |
| return 0; | |
| } | |
| static int tusb320l_get_revision(struct tusb320_priv *priv, unsigned int *revision) | |
| { | |
| return regmap_read(priv->regmap, TUSB320L_REGA0_REVISION, revision); | |
| } | |
| static struct tusb320_ops tusb320_ops = { | |
| .set_mode = tusb320_set_mode, | |
| }; | |
| static struct tusb320_ops tusb320l_ops = { | |
| .set_mode = tusb320l_set_mode, | |
| .get_revision = tusb320l_get_revision, | |
| }; | |
| static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv) | |
| { | |
| u8 mode; | |
| if (priv->pwr_opmode == TYPEC_PWR_MODE_USB) | |
| mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB; | |
| else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A) | |
| mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A; | |
| else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A) | |
| mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A; | |
| else /* No other mode is supported. */ | |
| return -EINVAL; | |
| return regmap_write_bits(priv->regmap, TUSB320_REG8, | |
| TUSB320_REG8_CURRENT_MODE_ADVERTISE, | |
| FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE, | |
| mode)); | |
| } | |
| static int tusb320_port_type_set(struct typec_port *port, | |
| enum typec_port_type type) | |
| { | |
| struct tusb320_priv *priv = typec_get_drvdata(port); | |
| if (type == TYPEC_PORT_SRC) | |
| return priv->ops->set_mode(priv, TUSB320_MODE_DFP); | |
| else if (type == TYPEC_PORT_SNK) | |
| return priv->ops->set_mode(priv, TUSB320_MODE_UFP); | |
| else if (type == TYPEC_PORT_DRP) | |
| return priv->ops->set_mode(priv, TUSB320_MODE_DRP); | |
| else | |
| return priv->ops->set_mode(priv, TUSB320_MODE_PORT); | |
| } | |
| static const struct typec_operations tusb320_typec_ops = { | |
| .port_type_set = tusb320_port_type_set, | |
| }; | |
| static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg) | |
| { | |
| int state, polarity; | |
| state = FIELD_GET(TUSB320_REG9_ATTACHED_STATE, reg); | |
| polarity = !!(reg & TUSB320_REG9_CABLE_DIRECTION); | |
| dev_dbg(priv->dev, "attached state: %s, polarity: %d\n", | |
| tusb_attached_states[state], polarity); | |
| extcon_set_state(priv->edev, EXTCON_USB, | |
| state == TUSB320_ATTACHED_STATE_UFP); | |
| extcon_set_state(priv->edev, EXTCON_USB_HOST, | |
| state == TUSB320_ATTACHED_STATE_DFP); | |
| extcon_set_property(priv->edev, EXTCON_USB, | |
| EXTCON_PROP_USB_TYPEC_POLARITY, | |
| (union extcon_property_value)polarity); | |
| extcon_set_property(priv->edev, EXTCON_USB_HOST, | |
| EXTCON_PROP_USB_TYPEC_POLARITY, | |
| (union extcon_property_value)polarity); | |
| extcon_sync(priv->edev, EXTCON_USB); | |
| extcon_sync(priv->edev, EXTCON_USB_HOST); | |
| priv->state = state; | |
| } | |
| static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9) | |
| { | |
| struct typec_port *port = priv->port; | |
| struct device *dev = priv->dev; | |
| int typec_mode; | |
| enum usb_role usb_role; | |
| enum typec_role pwr_role; | |
| enum typec_data_role data_role; | |
| u8 state, mode, accessory; | |
| int ret, reg8; | |
| bool ori; | |
| ret = regmap_read(priv->regmap, TUSB320_REG8, ®8); | |
| if (ret) { | |
| dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret); | |
| return; | |
| } | |
| ori = reg9 & TUSB320_REG9_CABLE_DIRECTION; | |
| typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE : | |
| TYPEC_ORIENTATION_NORMAL); | |
| state = FIELD_GET(TUSB320_REG9_ATTACHED_STATE, reg9); | |
| accessory = FIELD_GET(TUSB320_REG8_ACCESSORY_CONNECTED, reg8); | |
| switch (state) { | |
| case TUSB320_ATTACHED_STATE_DFP: | |
| typec_mode = TYPEC_MODE_USB2; | |
| usb_role = USB_ROLE_HOST; | |
| pwr_role = TYPEC_SOURCE; | |
| data_role = TYPEC_HOST; | |
| break; | |
| case TUSB320_ATTACHED_STATE_UFP: | |
| typec_mode = TYPEC_MODE_USB2; | |
| usb_role = USB_ROLE_DEVICE; | |
| pwr_role = TYPEC_SINK; | |
| data_role = TYPEC_DEVICE; | |
| break; | |
| case TUSB320_ATTACHED_STATE_ACC: | |
| /* | |
| * Accessory detected. For debug accessories, just make some | |
| * qualified guesses as to the role for lack of a better option. | |
| */ | |
| if (accessory == TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO || | |
| accessory == TUSB320_REG8_ACCESSORY_CONNECTED_ACHRG) { | |
| typec_mode = TYPEC_MODE_AUDIO; | |
| usb_role = USB_ROLE_NONE; | |
| pwr_role = TYPEC_SINK; | |
| data_role = TYPEC_DEVICE; | |
| break; | |
| } else if (accessory == | |
| TUSB320_REG8_ACCESSORY_CONNECTED_DBGDFP) { | |
| typec_mode = TYPEC_MODE_DEBUG; | |
| pwr_role = TYPEC_SOURCE; | |
| usb_role = USB_ROLE_HOST; | |
| data_role = TYPEC_HOST; | |
| break; | |
| } else if (accessory == | |
| TUSB320_REG8_ACCESSORY_CONNECTED_DBGUFP) { | |
| typec_mode = TYPEC_MODE_DEBUG; | |
| pwr_role = TYPEC_SINK; | |
| usb_role = USB_ROLE_DEVICE; | |
| data_role = TYPEC_DEVICE; | |
| break; | |
| } | |
| dev_warn(priv->dev, "unexpected ACCESSORY_CONNECTED state %d\n", | |
| accessory); | |
| fallthrough; | |
| default: | |
| typec_mode = TYPEC_MODE_USB2; | |
| usb_role = USB_ROLE_NONE; | |
| pwr_role = TYPEC_SINK; | |
| data_role = TYPEC_DEVICE; | |
| break; | |
| } | |
| typec_set_vconn_role(port, pwr_role); | |
| typec_set_pwr_role(port, pwr_role); | |
| typec_set_data_role(port, data_role); | |
| typec_set_mode(port, typec_mode); | |
| usb_role_switch_set_role(priv->role_sw, usb_role); | |
| mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8); | |
| if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF) | |
| typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB); | |
| else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED) | |
| typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A); | |
| else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI) | |
| typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A); | |
| else /* Charge through accessory */ | |
| typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB); | |
| } | |
| static irqreturn_t tusb320_state_update_handler(struct tusb320_priv *priv, | |
| bool force_update) | |
| { | |
| unsigned int reg; | |
| if (regmap_read(priv->regmap, TUSB320_REG9, ®)) { | |
| dev_err(priv->dev, "error during i2c read!\n"); | |
| return IRQ_NONE; | |
| } | |
| if (!force_update && !(reg & TUSB320_REG9_INTERRUPT_STATUS)) | |
| return IRQ_NONE; | |
| tusb320_extcon_irq_handler(priv, reg); | |
| /* | |
| * Type-C support is optional. Only call the Type-C handler if a | |
| * port had been registered previously. | |
| */ | |
| if (priv->port) | |
| tusb320_typec_irq_handler(priv, reg); | |
| regmap_write(priv->regmap, TUSB320_REG9, reg); | |
| return IRQ_HANDLED; | |
| } | |
| static irqreturn_t tusb320_irq_handler(int irq, void *dev_id) | |
| { | |
| struct tusb320_priv *priv = dev_id; | |
| return tusb320_state_update_handler(priv, false); | |
| } | |
| static const struct regmap_config tusb320_regmap_config = { | |
| .reg_bits = 8, | |
| .val_bits = 8, | |
| }; | |
| static int tusb320_extcon_probe(struct tusb320_priv *priv) | |
| { | |
| int ret; | |
| priv->edev = devm_extcon_dev_allocate(priv->dev, tusb320_extcon_cable); | |
| if (IS_ERR(priv->edev)) { | |
| dev_err(priv->dev, "failed to allocate extcon device\n"); | |
| return PTR_ERR(priv->edev); | |
| } | |
| ret = devm_extcon_dev_register(priv->dev, priv->edev); | |
| if (ret < 0) { | |
| dev_err(priv->dev, "failed to register extcon device\n"); | |
| return ret; | |
| } | |
| extcon_set_property_capability(priv->edev, EXTCON_USB, | |
| EXTCON_PROP_USB_TYPEC_POLARITY); | |
| extcon_set_property_capability(priv->edev, EXTCON_USB_HOST, | |
| EXTCON_PROP_USB_TYPEC_POLARITY); | |
| return 0; | |
| } | |
| static int tusb320_typec_probe(struct i2c_client *client, | |
| struct tusb320_priv *priv) | |
| { | |
| struct fwnode_handle *connector; | |
| const char *cap_str; | |
| int ret; | |
| /* The Type-C connector is optional, for backward compatibility. */ | |
| connector = device_get_named_child_node(&client->dev, "connector"); | |
| if (!connector) | |
| return 0; | |
| /* Type-C connector found. */ | |
| ret = typec_get_fw_cap(&priv->cap, connector); | |
| if (ret) | |
| goto err_put; | |
| priv->port_type = priv->cap.type; | |
| /* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */ | |
| ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str); | |
| if (ret) | |
| goto err_put; | |
| ret = typec_find_pwr_opmode(cap_str); | |
| if (ret < 0) | |
| goto err_put; | |
| priv->pwr_opmode = ret; | |
| /* Initialize the hardware with the devicetree settings. */ | |
| ret = tusb320_set_adv_pwr_mode(priv); | |
| if (ret) | |
| goto err_put; | |
| priv->cap.revision = USB_TYPEC_REV_1_1; | |
| priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO; | |
| priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG; | |
| priv->cap.orientation_aware = true; | |
| priv->cap.driver_data = priv; | |
| priv->cap.ops = &tusb320_typec_ops; | |
| priv->cap.fwnode = connector; | |
| priv->port = typec_register_port(&client->dev, &priv->cap); | |
| if (IS_ERR(priv->port)) { | |
| ret = PTR_ERR(priv->port); | |
| goto err_put; | |
| } | |
| /* Find any optional USB role switch that needs reporting to */ | |
| priv->role_sw = fwnode_usb_role_switch_get(connector); | |
| if (IS_ERR(priv->role_sw)) { | |
| ret = PTR_ERR(priv->role_sw); | |
| goto err_unreg; | |
| } | |
| priv->connector_fwnode = connector; | |
| return 0; | |
| err_unreg: | |
| typec_unregister_port(priv->port); | |
| err_put: | |
| fwnode_handle_put(connector); | |
| return ret; | |
| } | |
| static void tusb320_typec_remove(struct tusb320_priv *priv) | |
| { | |
| usb_role_switch_put(priv->role_sw); | |
| typec_unregister_port(priv->port); | |
| fwnode_handle_put(priv->connector_fwnode); | |
| } | |
| static int tusb320_probe(struct i2c_client *client) | |
| { | |
| struct tusb320_priv *priv; | |
| const void *match_data; | |
| unsigned int revision; | |
| int ret; | |
| u32 irq_trigger_type = IRQF_TRIGGER_FALLING; | |
| struct irq_data *irq_d; | |
| priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL); | |
| if (!priv) | |
| return -ENOMEM; | |
| priv->dev = &client->dev; | |
| i2c_set_clientdata(client, priv); | |
| priv->regmap = devm_regmap_init_i2c(client, &tusb320_regmap_config); | |
| if (IS_ERR(priv->regmap)) | |
| return PTR_ERR(priv->regmap); | |
| ret = tusb320_check_signature(priv); | |
| if (ret) | |
| return ret; | |
| match_data = device_get_match_data(&client->dev); | |
| if (!match_data) | |
| return -EINVAL; | |
| priv->ops = (struct tusb320_ops*)match_data; | |
| if (priv->ops->get_revision) { | |
| ret = priv->ops->get_revision(priv, &revision); | |
| if (ret) | |
| dev_warn(priv->dev, | |
| "failed to read revision register: %d\n", ret); | |
| else | |
| dev_info(priv->dev, "chip revision %d\n", revision); | |
| } | |
| ret = tusb320_extcon_probe(priv); | |
| if (ret) | |
| return ret; | |
| ret = tusb320_typec_probe(client, priv); | |
| if (ret) | |
| return ret; | |
| /* update initial state */ | |
| tusb320_state_update_handler(priv, true); | |
| /* Reset chip to its default state */ | |
| ret = tusb320_reset(priv); | |
| if (ret) | |
| dev_warn(priv->dev, "failed to reset chip: %d\n", ret); | |
| else | |
| /* | |
| * State and polarity might change after a reset, so update | |
| * them again and make sure the interrupt status bit is cleared. | |
| */ | |
| tusb320_state_update_handler(priv, true); | |
| irq_d = irq_get_irq_data(client->irq); | |
| if (irq_d) | |
| irq_trigger_type = irqd_get_trigger_type(irq_d); | |
| ret = devm_request_threaded_irq(priv->dev, client->irq, NULL, | |
| tusb320_irq_handler, | |
| IRQF_ONESHOT | irq_trigger_type, | |
| client->name, priv); | |
| if (ret) | |
| tusb320_typec_remove(priv); | |
| return ret; | |
| } | |
| static void tusb320_remove(struct i2c_client *client) | |
| { | |
| struct tusb320_priv *priv = i2c_get_clientdata(client); | |
| tusb320_typec_remove(priv); | |
| } | |
| static const struct of_device_id tusb320_extcon_dt_match[] = { | |
| { .compatible = "ti,tusb320", .data = &tusb320_ops, }, | |
| { .compatible = "ti,tusb320l", .data = &tusb320l_ops, }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, tusb320_extcon_dt_match); | |
| static struct i2c_driver tusb320_extcon_driver = { | |
| .probe = tusb320_probe, | |
| .remove = tusb320_remove, | |
| .driver = { | |
| .name = "extcon-tusb320", | |
| .of_match_table = tusb320_extcon_dt_match, | |
| }, | |
| }; | |
| static int __init tusb320_init(void) | |
| { | |
| return i2c_add_driver(&tusb320_extcon_driver); | |
| } | |
| subsys_initcall(tusb320_init); | |
| static void __exit tusb320_exit(void) | |
| { | |
| i2c_del_driver(&tusb320_extcon_driver); | |
| } | |
| module_exit(tusb320_exit); | |
| MODULE_AUTHOR("Michael Auchter <michael.auchter@ni.com>"); | |
| MODULE_DESCRIPTION("TI TUSB320 extcon driver"); | |
| MODULE_LICENSE("GPL v2"); |