| // SPDX-License-Identifier: GPL-2.0-or-later | |
| /* | |
| * zswap.c - zswap driver file | |
| * | |
| * zswap is a cache that takes pages that are in the process | |
| * of being swapped out and attempts to compress and store them in a | |
| * RAM-based memory pool. This can result in a significant I/O reduction on | |
| * the swap device and, in the case where decompressing from RAM is faster | |
| * than reading from the swap device, can also improve workload performance. | |
| * | |
| * Copyright (C) 2012 Seth Jennings <sjenning@linux.vnet.ibm.com> | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/cpu.h> | |
| #include <linux/highmem.h> | |
| #include <linux/slab.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/types.h> | |
| #include <linux/atomic.h> | |
| #include <linux/rbtree.h> | |
| #include <linux/swap.h> | |
| #include <linux/crypto.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/mempolicy.h> | |
| #include <linux/mempool.h> | |
| #include <linux/zpool.h> | |
| #include <crypto/acompress.h> | |
| #include <linux/zswap.h> | |
| #include <linux/mm_types.h> | |
| #include <linux/page-flags.h> | |
| #include <linux/swapops.h> | |
| #include <linux/writeback.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/workqueue.h> | |
| #include <linux/list_lru.h> | |
| #include "swap.h" | |
| #include "internal.h" | |
| /********************************* | |
| * statistics | |
| **********************************/ | |
| /* Total bytes used by the compressed storage */ | |
| u64 zswap_pool_total_size; | |
| /* The number of compressed pages currently stored in zswap */ | |
| atomic_t zswap_stored_pages = ATOMIC_INIT(0); | |
| /* The number of same-value filled pages currently stored in zswap */ | |
| static atomic_t zswap_same_filled_pages = ATOMIC_INIT(0); | |
| /* | |
| * The statistics below are not protected from concurrent access for | |
| * performance reasons so they may not be a 100% accurate. However, | |
| * they do provide useful information on roughly how many times a | |
| * certain event is occurring. | |
| */ | |
| /* Pool limit was hit (see zswap_max_pool_percent) */ | |
| static u64 zswap_pool_limit_hit; | |
| /* Pages written back when pool limit was reached */ | |
| static u64 zswap_written_back_pages; | |
| /* Store failed due to a reclaim failure after pool limit was reached */ | |
| static u64 zswap_reject_reclaim_fail; | |
| /* Store failed due to compression algorithm failure */ | |
| static u64 zswap_reject_compress_fail; | |
| /* Compressed page was too big for the allocator to (optimally) store */ | |
| static u64 zswap_reject_compress_poor; | |
| /* Store failed because underlying allocator could not get memory */ | |
| static u64 zswap_reject_alloc_fail; | |
| /* Store failed because the entry metadata could not be allocated (rare) */ | |
| static u64 zswap_reject_kmemcache_fail; | |
| /* Duplicate store was encountered (rare) */ | |
| static u64 zswap_duplicate_entry; | |
| /* Shrinker work queue */ | |
| static struct workqueue_struct *shrink_wq; | |
| /* Pool limit was hit, we need to calm down */ | |
| static bool zswap_pool_reached_full; | |
| /********************************* | |
| * tunables | |
| **********************************/ | |
| #define ZSWAP_PARAM_UNSET "" | |
| static int zswap_setup(void); | |
| /* Enable/disable zswap */ | |
| static bool zswap_enabled = IS_ENABLED(CONFIG_ZSWAP_DEFAULT_ON); | |
| static int zswap_enabled_param_set(const char *, | |
| const struct kernel_param *); | |
| static const struct kernel_param_ops zswap_enabled_param_ops = { | |
| .set = zswap_enabled_param_set, | |
| .get = param_get_bool, | |
| }; | |
| module_param_cb(enabled, &zswap_enabled_param_ops, &zswap_enabled, 0644); | |
| /* Crypto compressor to use */ | |
| static char *zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT; | |
| static int zswap_compressor_param_set(const char *, | |
| const struct kernel_param *); | |
| static const struct kernel_param_ops zswap_compressor_param_ops = { | |
| .set = zswap_compressor_param_set, | |
| .get = param_get_charp, | |
| .free = param_free_charp, | |
| }; | |
| module_param_cb(compressor, &zswap_compressor_param_ops, | |
| &zswap_compressor, 0644); | |
| /* Compressed storage zpool to use */ | |
| static char *zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT; | |
| static int zswap_zpool_param_set(const char *, const struct kernel_param *); | |
| static const struct kernel_param_ops zswap_zpool_param_ops = { | |
| .set = zswap_zpool_param_set, | |
| .get = param_get_charp, | |
| .free = param_free_charp, | |
| }; | |
| module_param_cb(zpool, &zswap_zpool_param_ops, &zswap_zpool_type, 0644); | |
| /* The maximum percentage of memory that the compressed pool can occupy */ | |
| static unsigned int zswap_max_pool_percent = 20; | |
| module_param_named(max_pool_percent, zswap_max_pool_percent, uint, 0644); | |
| /* The threshold for accepting new pages after the max_pool_percent was hit */ | |
| static unsigned int zswap_accept_thr_percent = 90; /* of max pool size */ | |
| module_param_named(accept_threshold_percent, zswap_accept_thr_percent, | |
| uint, 0644); | |
| /* | |
| * Enable/disable handling same-value filled pages (enabled by default). | |
| * If disabled every page is considered non-same-value filled. | |
| */ | |
| static bool zswap_same_filled_pages_enabled = true; | |
| module_param_named(same_filled_pages_enabled, zswap_same_filled_pages_enabled, | |
| bool, 0644); | |
| /* Enable/disable handling non-same-value filled pages (enabled by default) */ | |
| static bool zswap_non_same_filled_pages_enabled = true; | |
| module_param_named(non_same_filled_pages_enabled, zswap_non_same_filled_pages_enabled, | |
| bool, 0644); | |
| static bool zswap_exclusive_loads_enabled = IS_ENABLED( | |
| CONFIG_ZSWAP_EXCLUSIVE_LOADS_DEFAULT_ON); | |
| module_param_named(exclusive_loads, zswap_exclusive_loads_enabled, bool, 0644); | |
| /* Number of zpools in zswap_pool (empirically determined for scalability) */ | |
| #define ZSWAP_NR_ZPOOLS 32 | |
| /* Enable/disable memory pressure-based shrinker. */ | |
| static bool zswap_shrinker_enabled = IS_ENABLED( | |
| CONFIG_ZSWAP_SHRINKER_DEFAULT_ON); | |
| module_param_named(shrinker_enabled, zswap_shrinker_enabled, bool, 0644); | |
| bool is_zswap_enabled(void) | |
| { | |
| return zswap_enabled; | |
| } | |
| /********************************* | |
| * data structures | |
| **********************************/ | |
| struct crypto_acomp_ctx { | |
| struct crypto_acomp *acomp; | |
| struct acomp_req *req; | |
| struct crypto_wait wait; | |
| u8 *buffer; | |
| struct mutex mutex; | |
| }; | |
| /* | |
| * The lock ordering is zswap_tree.lock -> zswap_pool.lru_lock. | |
| * The only case where lru_lock is not acquired while holding tree.lock is | |
| * when a zswap_entry is taken off the lru for writeback, in that case it | |
| * needs to be verified that it's still valid in the tree. | |
| */ | |
| struct zswap_pool { | |
| struct zpool *zpools[ZSWAP_NR_ZPOOLS]; | |
| struct crypto_acomp_ctx __percpu *acomp_ctx; | |
| struct kref kref; | |
| struct list_head list; | |
| struct work_struct release_work; | |
| struct work_struct shrink_work; | |
| struct hlist_node node; | |
| char tfm_name[CRYPTO_MAX_ALG_NAME]; | |
| struct list_lru list_lru; | |
| struct mem_cgroup *next_shrink; | |
| struct shrinker *shrinker; | |
| atomic_t nr_stored; | |
| }; | |
| /* | |
| * struct zswap_entry | |
| * | |
| * This structure contains the metadata for tracking a single compressed | |
| * page within zswap. | |
| * | |
| * rbnode - links the entry into red-black tree for the appropriate swap type | |
| * swpentry - associated swap entry, the offset indexes into the red-black tree | |
| * refcount - the number of outstanding reference to the entry. This is needed | |
| * to protect against premature freeing of the entry by code | |
| * concurrent calls to load, invalidate, and writeback. The lock | |
| * for the zswap_tree structure that contains the entry must | |
| * be held while changing the refcount. Since the lock must | |
| * be held, there is no reason to also make refcount atomic. | |
| * length - the length in bytes of the compressed page data. Needed during | |
| * decompression. For a same value filled page length is 0, and both | |
| * pool and lru are invalid and must be ignored. | |
| * pool - the zswap_pool the entry's data is in | |
| * handle - zpool allocation handle that stores the compressed page data | |
| * value - value of the same-value filled pages which have same content | |
| * objcg - the obj_cgroup that the compressed memory is charged to | |
| * lru - handle to the pool's lru used to evict pages. | |
| */ | |
| struct zswap_entry { | |
| struct rb_node rbnode; | |
| swp_entry_t swpentry; | |
| int refcount; | |
| unsigned int length; | |
| struct zswap_pool *pool; | |
| union { | |
| unsigned long handle; | |
| unsigned long value; | |
| }; | |
| struct obj_cgroup *objcg; | |
| struct list_head lru; | |
| }; | |
| /* | |
| * The tree lock in the zswap_tree struct protects a few things: | |
| * - the rbtree | |
| * - the refcount field of each entry in the tree | |
| */ | |
| struct zswap_tree { | |
| struct rb_root rbroot; | |
| spinlock_t lock; | |
| }; | |
| static struct zswap_tree *zswap_trees[MAX_SWAPFILES]; | |
| /* RCU-protected iteration */ | |
| static LIST_HEAD(zswap_pools); | |
| /* protects zswap_pools list modification */ | |
| static DEFINE_SPINLOCK(zswap_pools_lock); | |
| /* pool counter to provide unique names to zpool */ | |
| static atomic_t zswap_pools_count = ATOMIC_INIT(0); | |
| enum zswap_init_type { | |
| ZSWAP_UNINIT, | |
| ZSWAP_INIT_SUCCEED, | |
| ZSWAP_INIT_FAILED | |
| }; | |
| static enum zswap_init_type zswap_init_state; | |
| /* used to ensure the integrity of initialization */ | |
| static DEFINE_MUTEX(zswap_init_lock); | |
| /* init completed, but couldn't create the initial pool */ | |
| static bool zswap_has_pool; | |
| /********************************* | |
| * helpers and fwd declarations | |
| **********************************/ | |
| #define zswap_pool_debug(msg, p) \ | |
| pr_debug("%s pool %s/%s\n", msg, (p)->tfm_name, \ | |
| zpool_get_type((p)->zpools[0])) | |
| static int zswap_writeback_entry(struct zswap_entry *entry, | |
| struct zswap_tree *tree); | |
| static int zswap_pool_get(struct zswap_pool *pool); | |
| static void zswap_pool_put(struct zswap_pool *pool); | |
| static bool zswap_is_full(void) | |
| { | |
| return totalram_pages() * zswap_max_pool_percent / 100 < | |
| DIV_ROUND_UP(zswap_pool_total_size, PAGE_SIZE); | |
| } | |
| static bool zswap_can_accept(void) | |
| { | |
| return totalram_pages() * zswap_accept_thr_percent / 100 * | |
| zswap_max_pool_percent / 100 > | |
| DIV_ROUND_UP(zswap_pool_total_size, PAGE_SIZE); | |
| } | |
| static u64 get_zswap_pool_size(struct zswap_pool *pool) | |
| { | |
| u64 pool_size = 0; | |
| int i; | |
| for (i = 0; i < ZSWAP_NR_ZPOOLS; i++) | |
| pool_size += zpool_get_total_size(pool->zpools[i]); | |
| return pool_size; | |
| } | |
| static void zswap_update_total_size(void) | |
| { | |
| struct zswap_pool *pool; | |
| u64 total = 0; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(pool, &zswap_pools, list) | |
| total += get_zswap_pool_size(pool); | |
| rcu_read_unlock(); | |
| zswap_pool_total_size = total; | |
| } | |
| /* should be called under RCU */ | |
| #ifdef CONFIG_MEMCG | |
| static inline struct mem_cgroup *mem_cgroup_from_entry(struct zswap_entry *entry) | |
| { | |
| return entry->objcg ? obj_cgroup_memcg(entry->objcg) : NULL; | |
| } | |
| #else | |
| static inline struct mem_cgroup *mem_cgroup_from_entry(struct zswap_entry *entry) | |
| { | |
| return NULL; | |
| } | |
| #endif | |
| static inline int entry_to_nid(struct zswap_entry *entry) | |
| { | |
| return page_to_nid(virt_to_page(entry)); | |
| } | |
| void zswap_memcg_offline_cleanup(struct mem_cgroup *memcg) | |
| { | |
| struct zswap_pool *pool; | |
| /* lock out zswap pools list modification */ | |
| spin_lock(&zswap_pools_lock); | |
| list_for_each_entry(pool, &zswap_pools, list) { | |
| if (pool->next_shrink == memcg) | |
| pool->next_shrink = mem_cgroup_iter(NULL, pool->next_shrink, NULL); | |
| } | |
| spin_unlock(&zswap_pools_lock); | |
| } | |
| /********************************* | |
| * zswap entry functions | |
| **********************************/ | |
| static struct kmem_cache *zswap_entry_cache; | |
| static struct zswap_entry *zswap_entry_cache_alloc(gfp_t gfp, int nid) | |
| { | |
| struct zswap_entry *entry; | |
| entry = kmem_cache_alloc_node(zswap_entry_cache, gfp, nid); | |
| if (!entry) | |
| return NULL; | |
| entry->refcount = 1; | |
| RB_CLEAR_NODE(&entry->rbnode); | |
| return entry; | |
| } | |
| static void zswap_entry_cache_free(struct zswap_entry *entry) | |
| { | |
| kmem_cache_free(zswap_entry_cache, entry); | |
| } | |
| /********************************* | |
| * zswap lruvec functions | |
| **********************************/ | |
| void zswap_lruvec_state_init(struct lruvec *lruvec) | |
| { | |
| atomic_long_set(&lruvec->zswap_lruvec_state.nr_zswap_protected, 0); | |
| } | |
| void zswap_folio_swapin(struct folio *folio) | |
| { | |
| struct lruvec *lruvec; | |
| if (folio) { | |
| lruvec = folio_lruvec(folio); | |
| atomic_long_inc(&lruvec->zswap_lruvec_state.nr_zswap_protected); | |
| } | |
| } | |
| /********************************* | |
| * lru functions | |
| **********************************/ | |
| static void zswap_lru_add(struct list_lru *list_lru, struct zswap_entry *entry) | |
| { | |
| atomic_long_t *nr_zswap_protected; | |
| unsigned long lru_size, old, new; | |
| int nid = entry_to_nid(entry); | |
| struct mem_cgroup *memcg; | |
| struct lruvec *lruvec; | |
| /* | |
| * Note that it is safe to use rcu_read_lock() here, even in the face of | |
| * concurrent memcg offlining. Thanks to the memcg->kmemcg_id indirection | |
| * used in list_lru lookup, only two scenarios are possible: | |
| * | |
| * 1. list_lru_add() is called before memcg->kmemcg_id is updated. The | |
| * new entry will be reparented to memcg's parent's list_lru. | |
| * 2. list_lru_add() is called after memcg->kmemcg_id is updated. The | |
| * new entry will be added directly to memcg's parent's list_lru. | |
| * | |
| * Similar reasoning holds for list_lru_del() and list_lru_putback(). | |
| */ | |
| rcu_read_lock(); | |
| memcg = mem_cgroup_from_entry(entry); | |
| /* will always succeed */ | |
| list_lru_add(list_lru, &entry->lru, nid, memcg); | |
| /* Update the protection area */ | |
| lru_size = list_lru_count_one(list_lru, nid, memcg); | |
| lruvec = mem_cgroup_lruvec(memcg, NODE_DATA(nid)); | |
| nr_zswap_protected = &lruvec->zswap_lruvec_state.nr_zswap_protected; | |
| old = atomic_long_inc_return(nr_zswap_protected); | |
| /* | |
| * Decay to avoid overflow and adapt to changing workloads. | |
| * This is based on LRU reclaim cost decaying heuristics. | |
| */ | |
| do { | |
| new = old > lru_size / 4 ? old / 2 : old; | |
| } while (!atomic_long_try_cmpxchg(nr_zswap_protected, &old, new)); | |
| rcu_read_unlock(); | |
| } | |
| static void zswap_lru_del(struct list_lru *list_lru, struct zswap_entry *entry) | |
| { | |
| int nid = entry_to_nid(entry); | |
| struct mem_cgroup *memcg; | |
| rcu_read_lock(); | |
| memcg = mem_cgroup_from_entry(entry); | |
| /* will always succeed */ | |
| list_lru_del(list_lru, &entry->lru, nid, memcg); | |
| rcu_read_unlock(); | |
| } | |
| static void zswap_lru_putback(struct list_lru *list_lru, | |
| struct zswap_entry *entry) | |
| { | |
| int nid = entry_to_nid(entry); | |
| spinlock_t *lock = &list_lru->node[nid].lock; | |
| struct mem_cgroup *memcg; | |
| struct lruvec *lruvec; | |
| rcu_read_lock(); | |
| memcg = mem_cgroup_from_entry(entry); | |
| spin_lock(lock); | |
| /* we cannot use list_lru_add here, because it increments node's lru count */ | |
| list_lru_putback(list_lru, &entry->lru, nid, memcg); | |
| spin_unlock(lock); | |
| lruvec = mem_cgroup_lruvec(memcg, NODE_DATA(entry_to_nid(entry))); | |
| /* increment the protection area to account for the LRU rotation. */ | |
| atomic_long_inc(&lruvec->zswap_lruvec_state.nr_zswap_protected); | |
| rcu_read_unlock(); | |
| } | |
| /********************************* | |
| * rbtree functions | |
| **********************************/ | |
| static struct zswap_entry *zswap_rb_search(struct rb_root *root, pgoff_t offset) | |
| { | |
| struct rb_node *node = root->rb_node; | |
| struct zswap_entry *entry; | |
| pgoff_t entry_offset; | |
| while (node) { | |
| entry = rb_entry(node, struct zswap_entry, rbnode); | |
| entry_offset = swp_offset(entry->swpentry); | |
| if (entry_offset > offset) | |
| node = node->rb_left; | |
| else if (entry_offset < offset) | |
| node = node->rb_right; | |
| else | |
| return entry; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * In the case that a entry with the same offset is found, a pointer to | |
| * the existing entry is stored in dupentry and the function returns -EEXIST | |
| */ | |
| static int zswap_rb_insert(struct rb_root *root, struct zswap_entry *entry, | |
| struct zswap_entry **dupentry) | |
| { | |
| struct rb_node **link = &root->rb_node, *parent = NULL; | |
| struct zswap_entry *myentry; | |
| pgoff_t myentry_offset, entry_offset = swp_offset(entry->swpentry); | |
| while (*link) { | |
| parent = *link; | |
| myentry = rb_entry(parent, struct zswap_entry, rbnode); | |
| myentry_offset = swp_offset(myentry->swpentry); | |
| if (myentry_offset > entry_offset) | |
| link = &(*link)->rb_left; | |
| else if (myentry_offset < entry_offset) | |
| link = &(*link)->rb_right; | |
| else { | |
| *dupentry = myentry; | |
| return -EEXIST; | |
| } | |
| } | |
| rb_link_node(&entry->rbnode, parent, link); | |
| rb_insert_color(&entry->rbnode, root); | |
| return 0; | |
| } | |
| static bool zswap_rb_erase(struct rb_root *root, struct zswap_entry *entry) | |
| { | |
| if (!RB_EMPTY_NODE(&entry->rbnode)) { | |
| rb_erase(&entry->rbnode, root); | |
| RB_CLEAR_NODE(&entry->rbnode); | |
| return true; | |
| } | |
| return false; | |
| } | |
| static struct zpool *zswap_find_zpool(struct zswap_entry *entry) | |
| { | |
| int i = 0; | |
| if (ZSWAP_NR_ZPOOLS > 1) | |
| i = hash_ptr(entry, ilog2(ZSWAP_NR_ZPOOLS)); | |
| return entry->pool->zpools[i]; | |
| } | |
| /* | |
| * Carries out the common pattern of freeing and entry's zpool allocation, | |
| * freeing the entry itself, and decrementing the number of stored pages. | |
| */ | |
| static void zswap_free_entry(struct zswap_entry *entry) | |
| { | |
| if (!entry->length) | |
| atomic_dec(&zswap_same_filled_pages); | |
| else { | |
| zswap_lru_del(&entry->pool->list_lru, entry); | |
| zpool_free(zswap_find_zpool(entry), entry->handle); | |
| atomic_dec(&entry->pool->nr_stored); | |
| zswap_pool_put(entry->pool); | |
| } | |
| if (entry->objcg) { | |
| obj_cgroup_uncharge_zswap(entry->objcg, entry->length); | |
| obj_cgroup_put(entry->objcg); | |
| } | |
| zswap_entry_cache_free(entry); | |
| atomic_dec(&zswap_stored_pages); | |
| zswap_update_total_size(); | |
| } | |
| /* caller must hold the tree lock */ | |
| static void zswap_entry_get(struct zswap_entry *entry) | |
| { | |
| entry->refcount++; | |
| } | |
| /* caller must hold the tree lock | |
| * remove from the tree and free it, if nobody reference the entry | |
| */ | |
| static void zswap_entry_put(struct zswap_tree *tree, | |
| struct zswap_entry *entry) | |
| { | |
| int refcount = --entry->refcount; | |
| WARN_ON_ONCE(refcount < 0); | |
| if (refcount == 0) { | |
| WARN_ON_ONCE(!RB_EMPTY_NODE(&entry->rbnode)); | |
| zswap_free_entry(entry); | |
| } | |
| } | |
| /* caller must hold the tree lock */ | |
| static struct zswap_entry *zswap_entry_find_get(struct rb_root *root, | |
| pgoff_t offset) | |
| { | |
| struct zswap_entry *entry; | |
| entry = zswap_rb_search(root, offset); | |
| if (entry) | |
| zswap_entry_get(entry); | |
| return entry; | |
| } | |
| /********************************* | |
| * shrinker functions | |
| **********************************/ | |
| static enum lru_status shrink_memcg_cb(struct list_head *item, struct list_lru_one *l, | |
| spinlock_t *lock, void *arg); | |
| static unsigned long zswap_shrinker_scan(struct shrinker *shrinker, | |
| struct shrink_control *sc) | |
| { | |
| struct lruvec *lruvec = mem_cgroup_lruvec(sc->memcg, NODE_DATA(sc->nid)); | |
| unsigned long shrink_ret, nr_protected, lru_size; | |
| struct zswap_pool *pool = shrinker->private_data; | |
| bool encountered_page_in_swapcache = false; | |
| if (!zswap_shrinker_enabled || | |
| !mem_cgroup_zswap_writeback_enabled(sc->memcg)) { | |
| sc->nr_scanned = 0; | |
| return SHRINK_STOP; | |
| } | |
| nr_protected = | |
| atomic_long_read(&lruvec->zswap_lruvec_state.nr_zswap_protected); | |
| lru_size = list_lru_shrink_count(&pool->list_lru, sc); | |
| /* | |
| * Abort if we are shrinking into the protected region. | |
| * | |
| * This short-circuiting is necessary because if we have too many multiple | |
| * concurrent reclaimers getting the freeable zswap object counts at the | |
| * same time (before any of them made reasonable progress), the total | |
| * number of reclaimed objects might be more than the number of unprotected | |
| * objects (i.e the reclaimers will reclaim into the protected area of the | |
| * zswap LRU). | |
| */ | |
| if (nr_protected >= lru_size - sc->nr_to_scan) { | |
| sc->nr_scanned = 0; | |
| return SHRINK_STOP; | |
| } | |
| shrink_ret = list_lru_shrink_walk(&pool->list_lru, sc, &shrink_memcg_cb, | |
| &encountered_page_in_swapcache); | |
| if (encountered_page_in_swapcache) | |
| return SHRINK_STOP; | |
| return shrink_ret ? shrink_ret : SHRINK_STOP; | |
| } | |
| static unsigned long zswap_shrinker_count(struct shrinker *shrinker, | |
| struct shrink_control *sc) | |
| { | |
| struct zswap_pool *pool = shrinker->private_data; | |
| struct mem_cgroup *memcg = sc->memcg; | |
| struct lruvec *lruvec = mem_cgroup_lruvec(memcg, NODE_DATA(sc->nid)); | |
| unsigned long nr_backing, nr_stored, nr_freeable, nr_protected; | |
| if (!zswap_shrinker_enabled || !mem_cgroup_zswap_writeback_enabled(memcg)) | |
| return 0; | |
| #ifdef CONFIG_MEMCG_KMEM | |
| mem_cgroup_flush_stats(memcg); | |
| nr_backing = memcg_page_state(memcg, MEMCG_ZSWAP_B) >> PAGE_SHIFT; | |
| nr_stored = memcg_page_state(memcg, MEMCG_ZSWAPPED); | |
| #else | |
| /* use pool stats instead of memcg stats */ | |
| nr_backing = get_zswap_pool_size(pool) >> PAGE_SHIFT; | |
| nr_stored = atomic_read(&pool->nr_stored); | |
| #endif | |
| if (!nr_stored) | |
| return 0; | |
| nr_protected = | |
| atomic_long_read(&lruvec->zswap_lruvec_state.nr_zswap_protected); | |
| nr_freeable = list_lru_shrink_count(&pool->list_lru, sc); | |
| /* | |
| * Subtract the lru size by an estimate of the number of pages | |
| * that should be protected. | |
| */ | |
| nr_freeable = nr_freeable > nr_protected ? nr_freeable - nr_protected : 0; | |
| /* | |
| * Scale the number of freeable pages by the memory saving factor. | |
| * This ensures that the better zswap compresses memory, the fewer | |
| * pages we will evict to swap (as it will otherwise incur IO for | |
| * relatively small memory saving). | |
| */ | |
| return mult_frac(nr_freeable, nr_backing, nr_stored); | |
| } | |
| static void zswap_alloc_shrinker(struct zswap_pool *pool) | |
| { | |
| pool->shrinker = | |
| shrinker_alloc(SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE, "mm-zswap"); | |
| if (!pool->shrinker) | |
| return; | |
| pool->shrinker->private_data = pool; | |
| pool->shrinker->scan_objects = zswap_shrinker_scan; | |
| pool->shrinker->count_objects = zswap_shrinker_count; | |
| pool->shrinker->batch = 0; | |
| pool->shrinker->seeks = DEFAULT_SEEKS; | |
| } | |
| /********************************* | |
| * per-cpu code | |
| **********************************/ | |
| static int zswap_cpu_comp_prepare(unsigned int cpu, struct hlist_node *node) | |
| { | |
| struct zswap_pool *pool = hlist_entry(node, struct zswap_pool, node); | |
| struct crypto_acomp_ctx *acomp_ctx = per_cpu_ptr(pool->acomp_ctx, cpu); | |
| struct crypto_acomp *acomp; | |
| struct acomp_req *req; | |
| int ret; | |
| mutex_init(&acomp_ctx->mutex); | |
| acomp_ctx->buffer = kmalloc_node(PAGE_SIZE * 2, GFP_KERNEL, cpu_to_node(cpu)); | |
| if (!acomp_ctx->buffer) | |
| return -ENOMEM; | |
| acomp = crypto_alloc_acomp_node(pool->tfm_name, 0, 0, cpu_to_node(cpu)); | |
| if (IS_ERR(acomp)) { | |
| pr_err("could not alloc crypto acomp %s : %ld\n", | |
| pool->tfm_name, PTR_ERR(acomp)); | |
| ret = PTR_ERR(acomp); | |
| goto acomp_fail; | |
| } | |
| acomp_ctx->acomp = acomp; | |
| req = acomp_request_alloc(acomp_ctx->acomp); | |
| if (!req) { | |
| pr_err("could not alloc crypto acomp_request %s\n", | |
| pool->tfm_name); | |
| ret = -ENOMEM; | |
| goto req_fail; | |
| } | |
| acomp_ctx->req = req; | |
| crypto_init_wait(&acomp_ctx->wait); | |
| /* | |
| * if the backend of acomp is async zip, crypto_req_done() will wakeup | |
| * crypto_wait_req(); if the backend of acomp is scomp, the callback | |
| * won't be called, crypto_wait_req() will return without blocking. | |
| */ | |
| acomp_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG, | |
| crypto_req_done, &acomp_ctx->wait); | |
| return 0; | |
| req_fail: | |
| crypto_free_acomp(acomp_ctx->acomp); | |
| acomp_fail: | |
| kfree(acomp_ctx->buffer); | |
| return ret; | |
| } | |
| static int zswap_cpu_comp_dead(unsigned int cpu, struct hlist_node *node) | |
| { | |
| struct zswap_pool *pool = hlist_entry(node, struct zswap_pool, node); | |
| struct crypto_acomp_ctx *acomp_ctx = per_cpu_ptr(pool->acomp_ctx, cpu); | |
| if (!IS_ERR_OR_NULL(acomp_ctx)) { | |
| if (!IS_ERR_OR_NULL(acomp_ctx->req)) | |
| acomp_request_free(acomp_ctx->req); | |
| if (!IS_ERR_OR_NULL(acomp_ctx->acomp)) | |
| crypto_free_acomp(acomp_ctx->acomp); | |
| kfree(acomp_ctx->buffer); | |
| } | |
| return 0; | |
| } | |
| /********************************* | |
| * pool functions | |
| **********************************/ | |
| static struct zswap_pool *__zswap_pool_current(void) | |
| { | |
| struct zswap_pool *pool; | |
| pool = list_first_or_null_rcu(&zswap_pools, typeof(*pool), list); | |
| WARN_ONCE(!pool && zswap_has_pool, | |
| "%s: no page storage pool!\n", __func__); | |
| return pool; | |
| } | |
| static struct zswap_pool *zswap_pool_current(void) | |
| { | |
| assert_spin_locked(&zswap_pools_lock); | |
| return __zswap_pool_current(); | |
| } | |
| static struct zswap_pool *zswap_pool_current_get(void) | |
| { | |
| struct zswap_pool *pool; | |
| rcu_read_lock(); | |
| pool = __zswap_pool_current(); | |
| if (!zswap_pool_get(pool)) | |
| pool = NULL; | |
| rcu_read_unlock(); | |
| return pool; | |
| } | |
| static struct zswap_pool *zswap_pool_last_get(void) | |
| { | |
| struct zswap_pool *pool, *last = NULL; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(pool, &zswap_pools, list) | |
| last = pool; | |
| WARN_ONCE(!last && zswap_has_pool, | |
| "%s: no page storage pool!\n", __func__); | |
| if (!zswap_pool_get(last)) | |
| last = NULL; | |
| rcu_read_unlock(); | |
| return last; | |
| } | |
| /* type and compressor must be null-terminated */ | |
| static struct zswap_pool *zswap_pool_find_get(char *type, char *compressor) | |
| { | |
| struct zswap_pool *pool; | |
| assert_spin_locked(&zswap_pools_lock); | |
| list_for_each_entry_rcu(pool, &zswap_pools, list) { | |
| if (strcmp(pool->tfm_name, compressor)) | |
| continue; | |
| /* all zpools share the same type */ | |
| if (strcmp(zpool_get_type(pool->zpools[0]), type)) | |
| continue; | |
| /* if we can't get it, it's about to be destroyed */ | |
| if (!zswap_pool_get(pool)) | |
| continue; | |
| return pool; | |
| } | |
| return NULL; | |
| } | |
| /* | |
| * If the entry is still valid in the tree, drop the initial ref and remove it | |
| * from the tree. This function must be called with an additional ref held, | |
| * otherwise it may race with another invalidation freeing the entry. | |
| */ | |
| static void zswap_invalidate_entry(struct zswap_tree *tree, | |
| struct zswap_entry *entry) | |
| { | |
| if (zswap_rb_erase(&tree->rbroot, entry)) | |
| zswap_entry_put(tree, entry); | |
| } | |
| static enum lru_status shrink_memcg_cb(struct list_head *item, struct list_lru_one *l, | |
| spinlock_t *lock, void *arg) | |
| { | |
| struct zswap_entry *entry = container_of(item, struct zswap_entry, lru); | |
| bool *encountered_page_in_swapcache = (bool *)arg; | |
| struct zswap_tree *tree; | |
| pgoff_t swpoffset; | |
| enum lru_status ret = LRU_REMOVED_RETRY; | |
| int writeback_result; | |
| /* | |
| * Once the lru lock is dropped, the entry might get freed. The | |
| * swpoffset is copied to the stack, and entry isn't deref'd again | |
| * until the entry is verified to still be alive in the tree. | |
| */ | |
| swpoffset = swp_offset(entry->swpentry); | |
| tree = zswap_trees[swp_type(entry->swpentry)]; | |
| list_lru_isolate(l, item); | |
| /* | |
| * It's safe to drop the lock here because we return either | |
| * LRU_REMOVED_RETRY or LRU_RETRY. | |
| */ | |
| spin_unlock(lock); | |
| /* Check for invalidate() race */ | |
| spin_lock(&tree->lock); | |
| if (entry != zswap_rb_search(&tree->rbroot, swpoffset)) | |
| goto unlock; | |
| /* Hold a reference to prevent a free during writeback */ | |
| zswap_entry_get(entry); | |
| spin_unlock(&tree->lock); | |
| writeback_result = zswap_writeback_entry(entry, tree); | |
| spin_lock(&tree->lock); | |
| if (writeback_result) { | |
| zswap_reject_reclaim_fail++; | |
| zswap_lru_putback(&entry->pool->list_lru, entry); | |
| ret = LRU_RETRY; | |
| /* | |
| * Encountering a page already in swap cache is a sign that we are shrinking | |
| * into the warmer region. We should terminate shrinking (if we're in the dynamic | |
| * shrinker context). | |
| */ | |
| if (writeback_result == -EEXIST && encountered_page_in_swapcache) | |
| *encountered_page_in_swapcache = true; | |
| goto put_unlock; | |
| } | |
| zswap_written_back_pages++; | |
| if (entry->objcg) | |
| count_objcg_event(entry->objcg, ZSWPWB); | |
| count_vm_event(ZSWPWB); | |
| /* | |
| * Writeback started successfully, the page now belongs to the | |
| * swapcache. Drop the entry from zswap - unless invalidate already | |
| * took it out while we had the tree->lock released for IO. | |
| */ | |
| zswap_invalidate_entry(tree, entry); | |
| put_unlock: | |
| /* Drop local reference */ | |
| zswap_entry_put(tree, entry); | |
| unlock: | |
| spin_unlock(&tree->lock); | |
| spin_lock(lock); | |
| return ret; | |
| } | |
| static int shrink_memcg(struct mem_cgroup *memcg) | |
| { | |
| struct zswap_pool *pool; | |
| int nid, shrunk = 0; | |
| if (!mem_cgroup_zswap_writeback_enabled(memcg)) | |
| return -EINVAL; | |
| /* | |
| * Skip zombies because their LRUs are reparented and we would be | |
| * reclaiming from the parent instead of the dead memcg. | |
| */ | |
| if (memcg && !mem_cgroup_online(memcg)) | |
| return -ENOENT; | |
| pool = zswap_pool_current_get(); | |
| if (!pool) | |
| return -EINVAL; | |
| for_each_node_state(nid, N_NORMAL_MEMORY) { | |
| unsigned long nr_to_walk = 1; | |
| shrunk += list_lru_walk_one(&pool->list_lru, nid, memcg, | |
| &shrink_memcg_cb, NULL, &nr_to_walk); | |
| } | |
| zswap_pool_put(pool); | |
| return shrunk ? 0 : -EAGAIN; | |
| } | |
| static void shrink_worker(struct work_struct *w) | |
| { | |
| struct zswap_pool *pool = container_of(w, typeof(*pool), | |
| shrink_work); | |
| struct mem_cgroup *memcg; | |
| int ret, failures = 0; | |
| /* global reclaim will select cgroup in a round-robin fashion. */ | |
| do { | |
| spin_lock(&zswap_pools_lock); | |
| pool->next_shrink = mem_cgroup_iter(NULL, pool->next_shrink, NULL); | |
| memcg = pool->next_shrink; | |
| /* | |
| * We need to retry if we have gone through a full round trip, or if we | |
| * got an offline memcg (or else we risk undoing the effect of the | |
| * zswap memcg offlining cleanup callback). This is not catastrophic | |
| * per se, but it will keep the now offlined memcg hostage for a while. | |
| * | |
| * Note that if we got an online memcg, we will keep the extra | |
| * reference in case the original reference obtained by mem_cgroup_iter | |
| * is dropped by the zswap memcg offlining callback, ensuring that the | |
| * memcg is not killed when we are reclaiming. | |
| */ | |
| if (!memcg) { | |
| spin_unlock(&zswap_pools_lock); | |
| if (++failures == MAX_RECLAIM_RETRIES) | |
| break; | |
| goto resched; | |
| } | |
| if (!mem_cgroup_tryget_online(memcg)) { | |
| /* drop the reference from mem_cgroup_iter() */ | |
| mem_cgroup_iter_break(NULL, memcg); | |
| pool->next_shrink = NULL; | |
| spin_unlock(&zswap_pools_lock); | |
| if (++failures == MAX_RECLAIM_RETRIES) | |
| break; | |
| goto resched; | |
| } | |
| spin_unlock(&zswap_pools_lock); | |
| ret = shrink_memcg(memcg); | |
| /* drop the extra reference */ | |
| mem_cgroup_put(memcg); | |
| if (ret == -EINVAL) | |
| break; | |
| if (ret && ++failures == MAX_RECLAIM_RETRIES) | |
| break; | |
| resched: | |
| cond_resched(); | |
| } while (!zswap_can_accept()); | |
| zswap_pool_put(pool); | |
| } | |
| static struct zswap_pool *zswap_pool_create(char *type, char *compressor) | |
| { | |
| int i; | |
| struct zswap_pool *pool; | |
| char name[38]; /* 'zswap' + 32 char (max) num + \0 */ | |
| gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM; | |
| int ret; | |
| if (!zswap_has_pool) { | |
| /* if either are unset, pool initialization failed, and we | |
| * need both params to be set correctly before trying to | |
| * create a pool. | |
| */ | |
| if (!strcmp(type, ZSWAP_PARAM_UNSET)) | |
| return NULL; | |
| if (!strcmp(compressor, ZSWAP_PARAM_UNSET)) | |
| return NULL; | |
| } | |
| pool = kzalloc(sizeof(*pool), GFP_KERNEL); | |
| if (!pool) | |
| return NULL; | |
| for (i = 0; i < ZSWAP_NR_ZPOOLS; i++) { | |
| /* unique name for each pool specifically required by zsmalloc */ | |
| snprintf(name, 38, "zswap%x", | |
| atomic_inc_return(&zswap_pools_count)); | |
| pool->zpools[i] = zpool_create_pool(type, name, gfp); | |
| if (!pool->zpools[i]) { | |
| pr_err("%s zpool not available\n", type); | |
| goto error; | |
| } | |
| } | |
| pr_debug("using %s zpool\n", zpool_get_type(pool->zpools[0])); | |
| strscpy(pool->tfm_name, compressor, sizeof(pool->tfm_name)); | |
| pool->acomp_ctx = alloc_percpu(*pool->acomp_ctx); | |
| if (!pool->acomp_ctx) { | |
| pr_err("percpu alloc failed\n"); | |
| goto error; | |
| } | |
| ret = cpuhp_state_add_instance(CPUHP_MM_ZSWP_POOL_PREPARE, | |
| &pool->node); | |
| if (ret) | |
| goto error; | |
| zswap_alloc_shrinker(pool); | |
| if (!pool->shrinker) | |
| goto error; | |
| pr_debug("using %s compressor\n", pool->tfm_name); | |
| /* being the current pool takes 1 ref; this func expects the | |
| * caller to always add the new pool as the current pool | |
| */ | |
| kref_init(&pool->kref); | |
| INIT_LIST_HEAD(&pool->list); | |
| if (list_lru_init_memcg(&pool->list_lru, pool->shrinker)) | |
| goto lru_fail; | |
| shrinker_register(pool->shrinker); | |
| INIT_WORK(&pool->shrink_work, shrink_worker); | |
| atomic_set(&pool->nr_stored, 0); | |
| zswap_pool_debug("created", pool); | |
| return pool; | |
| lru_fail: | |
| list_lru_destroy(&pool->list_lru); | |
| shrinker_free(pool->shrinker); | |
| error: | |
| if (pool->acomp_ctx) | |
| free_percpu(pool->acomp_ctx); | |
| while (i--) | |
| zpool_destroy_pool(pool->zpools[i]); | |
| kfree(pool); | |
| return NULL; | |
| } | |
| static struct zswap_pool *__zswap_pool_create_fallback(void) | |
| { | |
| bool has_comp, has_zpool; | |
| has_comp = crypto_has_acomp(zswap_compressor, 0, 0); | |
| if (!has_comp && strcmp(zswap_compressor, | |
| CONFIG_ZSWAP_COMPRESSOR_DEFAULT)) { | |
| pr_err("compressor %s not available, using default %s\n", | |
| zswap_compressor, CONFIG_ZSWAP_COMPRESSOR_DEFAULT); | |
| param_free_charp(&zswap_compressor); | |
| zswap_compressor = CONFIG_ZSWAP_COMPRESSOR_DEFAULT; | |
| has_comp = crypto_has_acomp(zswap_compressor, 0, 0); | |
| } | |
| if (!has_comp) { | |
| pr_err("default compressor %s not available\n", | |
| zswap_compressor); | |
| param_free_charp(&zswap_compressor); | |
| zswap_compressor = ZSWAP_PARAM_UNSET; | |
| } | |
| has_zpool = zpool_has_pool(zswap_zpool_type); | |
| if (!has_zpool && strcmp(zswap_zpool_type, | |
| CONFIG_ZSWAP_ZPOOL_DEFAULT)) { | |
| pr_err("zpool %s not available, using default %s\n", | |
| zswap_zpool_type, CONFIG_ZSWAP_ZPOOL_DEFAULT); | |
| param_free_charp(&zswap_zpool_type); | |
| zswap_zpool_type = CONFIG_ZSWAP_ZPOOL_DEFAULT; | |
| has_zpool = zpool_has_pool(zswap_zpool_type); | |
| } | |
| if (!has_zpool) { | |
| pr_err("default zpool %s not available\n", | |
| zswap_zpool_type); | |
| param_free_charp(&zswap_zpool_type); | |
| zswap_zpool_type = ZSWAP_PARAM_UNSET; | |
| } | |
| if (!has_comp || !has_zpool) | |
| return NULL; | |
| return zswap_pool_create(zswap_zpool_type, zswap_compressor); | |
| } | |
| static void zswap_pool_destroy(struct zswap_pool *pool) | |
| { | |
| int i; | |
| zswap_pool_debug("destroying", pool); | |
| shrinker_free(pool->shrinker); | |
| cpuhp_state_remove_instance(CPUHP_MM_ZSWP_POOL_PREPARE, &pool->node); | |
| free_percpu(pool->acomp_ctx); | |
| list_lru_destroy(&pool->list_lru); | |
| spin_lock(&zswap_pools_lock); | |
| mem_cgroup_iter_break(NULL, pool->next_shrink); | |
| pool->next_shrink = NULL; | |
| spin_unlock(&zswap_pools_lock); | |
| for (i = 0; i < ZSWAP_NR_ZPOOLS; i++) | |
| zpool_destroy_pool(pool->zpools[i]); | |
| kfree(pool); | |
| } | |
| static int __must_check zswap_pool_get(struct zswap_pool *pool) | |
| { | |
| if (!pool) | |
| return 0; | |
| return kref_get_unless_zero(&pool->kref); | |
| } | |
| static void __zswap_pool_release(struct work_struct *work) | |
| { | |
| struct zswap_pool *pool = container_of(work, typeof(*pool), | |
| release_work); | |
| synchronize_rcu(); | |
| /* nobody should have been able to get a kref... */ | |
| WARN_ON(kref_get_unless_zero(&pool->kref)); | |
| /* pool is now off zswap_pools list and has no references. */ | |
| zswap_pool_destroy(pool); | |
| } | |
| static void __zswap_pool_empty(struct kref *kref) | |
| { | |
| struct zswap_pool *pool; | |
| pool = container_of(kref, typeof(*pool), kref); | |
| spin_lock(&zswap_pools_lock); | |
| WARN_ON(pool == zswap_pool_current()); | |
| list_del_rcu(&pool->list); | |
| INIT_WORK(&pool->release_work, __zswap_pool_release); | |
| schedule_work(&pool->release_work); | |
| spin_unlock(&zswap_pools_lock); | |
| } | |
| static void zswap_pool_put(struct zswap_pool *pool) | |
| { | |
| kref_put(&pool->kref, __zswap_pool_empty); | |
| } | |
| /********************************* | |
| * param callbacks | |
| **********************************/ | |
| static bool zswap_pool_changed(const char *s, const struct kernel_param *kp) | |
| { | |
| /* no change required */ | |
| if (!strcmp(s, *(char **)kp->arg) && zswap_has_pool) | |
| return false; | |
| return true; | |
| } | |
| /* val must be a null-terminated string */ | |
| static int __zswap_param_set(const char *val, const struct kernel_param *kp, | |
| char *type, char *compressor) | |
| { | |
| struct zswap_pool *pool, *put_pool = NULL; | |
| char *s = strstrip((char *)val); | |
| int ret = 0; | |
| bool new_pool = false; | |
| mutex_lock(&zswap_init_lock); | |
| switch (zswap_init_state) { | |
| case ZSWAP_UNINIT: | |
| /* if this is load-time (pre-init) param setting, | |
| * don't create a pool; that's done during init. | |
| */ | |
| ret = param_set_charp(s, kp); | |
| break; | |
| case ZSWAP_INIT_SUCCEED: | |
| new_pool = zswap_pool_changed(s, kp); | |
| break; | |
| case ZSWAP_INIT_FAILED: | |
| pr_err("can't set param, initialization failed\n"); | |
| ret = -ENODEV; | |
| } | |
| mutex_unlock(&zswap_init_lock); | |
| /* no need to create a new pool, return directly */ | |
| if (!new_pool) | |
| return ret; | |
| if (!type) { | |
| if (!zpool_has_pool(s)) { | |
| pr_err("zpool %s not available\n", s); | |
| return -ENOENT; | |
| } | |
| type = s; | |
| } else if (!compressor) { | |
| if (!crypto_has_acomp(s, 0, 0)) { | |
| pr_err("compressor %s not available\n", s); | |
| return -ENOENT; | |
| } | |
| compressor = s; | |
| } else { | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| spin_lock(&zswap_pools_lock); | |
| pool = zswap_pool_find_get(type, compressor); | |
| if (pool) { | |
| zswap_pool_debug("using existing", pool); | |
| WARN_ON(pool == zswap_pool_current()); | |
| list_del_rcu(&pool->list); | |
| } | |
| spin_unlock(&zswap_pools_lock); | |
| if (!pool) | |
| pool = zswap_pool_create(type, compressor); | |
| if (pool) | |
| ret = param_set_charp(s, kp); | |
| else | |
| ret = -EINVAL; | |
| spin_lock(&zswap_pools_lock); | |
| if (!ret) { | |
| put_pool = zswap_pool_current(); | |
| list_add_rcu(&pool->list, &zswap_pools); | |
| zswap_has_pool = true; | |
| } else if (pool) { | |
| /* add the possibly pre-existing pool to the end of the pools | |
| * list; if it's new (and empty) then it'll be removed and | |
| * destroyed by the put after we drop the lock | |
| */ | |
| list_add_tail_rcu(&pool->list, &zswap_pools); | |
| put_pool = pool; | |
| } | |
| spin_unlock(&zswap_pools_lock); | |
| if (!zswap_has_pool && !pool) { | |
| /* if initial pool creation failed, and this pool creation also | |
| * failed, maybe both compressor and zpool params were bad. | |
| * Allow changing this param, so pool creation will succeed | |
| * when the other param is changed. We already verified this | |
| * param is ok in the zpool_has_pool() or crypto_has_acomp() | |
| * checks above. | |
| */ | |
| ret = param_set_charp(s, kp); | |
| } | |
| /* drop the ref from either the old current pool, | |
| * or the new pool we failed to add | |
| */ | |
| if (put_pool) | |
| zswap_pool_put(put_pool); | |
| return ret; | |
| } | |
| static int zswap_compressor_param_set(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| return __zswap_param_set(val, kp, zswap_zpool_type, NULL); | |
| } | |
| static int zswap_zpool_param_set(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| return __zswap_param_set(val, kp, NULL, zswap_compressor); | |
| } | |
| static int zswap_enabled_param_set(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| int ret = -ENODEV; | |
| /* if this is load-time (pre-init) param setting, only set param. */ | |
| if (system_state != SYSTEM_RUNNING) | |
| return param_set_bool(val, kp); | |
| mutex_lock(&zswap_init_lock); | |
| switch (zswap_init_state) { | |
| case ZSWAP_UNINIT: | |
| if (zswap_setup()) | |
| break; | |
| fallthrough; | |
| case ZSWAP_INIT_SUCCEED: | |
| if (!zswap_has_pool) | |
| pr_err("can't enable, no pool configured\n"); | |
| else | |
| ret = param_set_bool(val, kp); | |
| break; | |
| case ZSWAP_INIT_FAILED: | |
| pr_err("can't enable, initialization failed\n"); | |
| } | |
| mutex_unlock(&zswap_init_lock); | |
| return ret; | |
| } | |
| static void __zswap_load(struct zswap_entry *entry, struct page *page) | |
| { | |
| struct zpool *zpool = zswap_find_zpool(entry); | |
| struct scatterlist input, output; | |
| struct crypto_acomp_ctx *acomp_ctx; | |
| u8 *src; | |
| acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx); | |
| mutex_lock(&acomp_ctx->mutex); | |
| src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO); | |
| if (!zpool_can_sleep_mapped(zpool)) { | |
| memcpy(acomp_ctx->buffer, src, entry->length); | |
| src = acomp_ctx->buffer; | |
| zpool_unmap_handle(zpool, entry->handle); | |
| } | |
| sg_init_one(&input, src, entry->length); | |
| sg_init_table(&output, 1); | |
| sg_set_page(&output, page, PAGE_SIZE, 0); | |
| acomp_request_set_params(acomp_ctx->req, &input, &output, entry->length, PAGE_SIZE); | |
| BUG_ON(crypto_wait_req(crypto_acomp_decompress(acomp_ctx->req), &acomp_ctx->wait)); | |
| BUG_ON(acomp_ctx->req->dlen != PAGE_SIZE); | |
| mutex_unlock(&acomp_ctx->mutex); | |
| if (zpool_can_sleep_mapped(zpool)) | |
| zpool_unmap_handle(zpool, entry->handle); | |
| } | |
| /********************************* | |
| * writeback code | |
| **********************************/ | |
| /* | |
| * Attempts to free an entry by adding a folio to the swap cache, | |
| * decompressing the entry data into the folio, and issuing a | |
| * bio write to write the folio back to the swap device. | |
| * | |
| * This can be thought of as a "resumed writeback" of the folio | |
| * to the swap device. We are basically resuming the same swap | |
| * writeback path that was intercepted with the zswap_store() | |
| * in the first place. After the folio has been decompressed into | |
| * the swap cache, the compressed version stored by zswap can be | |
| * freed. | |
| */ | |
| static int zswap_writeback_entry(struct zswap_entry *entry, | |
| struct zswap_tree *tree) | |
| { | |
| swp_entry_t swpentry = entry->swpentry; | |
| struct folio *folio; | |
| struct mempolicy *mpol; | |
| bool folio_was_allocated; | |
| struct writeback_control wbc = { | |
| .sync_mode = WB_SYNC_NONE, | |
| }; | |
| /* try to allocate swap cache folio */ | |
| mpol = get_task_policy(current); | |
| folio = __read_swap_cache_async(swpentry, GFP_KERNEL, mpol, | |
| NO_INTERLEAVE_INDEX, &folio_was_allocated, true); | |
| if (!folio) | |
| return -ENOMEM; | |
| /* | |
| * Found an existing folio, we raced with load/swapin. We generally | |
| * writeback cold folios from zswap, and swapin means the folio just | |
| * became hot. Skip this folio and let the caller find another one. | |
| */ | |
| if (!folio_was_allocated) { | |
| folio_put(folio); | |
| return -EEXIST; | |
| } | |
| /* | |
| * folio is locked, and the swapcache is now secured against | |
| * concurrent swapping to and from the slot. Verify that the | |
| * swap entry hasn't been invalidated and recycled behind our | |
| * backs (our zswap_entry reference doesn't prevent that), to | |
| * avoid overwriting a new swap folio with old compressed data. | |
| */ | |
| spin_lock(&tree->lock); | |
| if (zswap_rb_search(&tree->rbroot, swp_offset(entry->swpentry)) != entry) { | |
| spin_unlock(&tree->lock); | |
| delete_from_swap_cache(folio); | |
| return -ENOMEM; | |
| } | |
| spin_unlock(&tree->lock); | |
| __zswap_load(entry, &folio->page); | |
| /* folio is up to date */ | |
| folio_mark_uptodate(folio); | |
| /* move it to the tail of the inactive list after end_writeback */ | |
| folio_set_reclaim(folio); | |
| /* start writeback */ | |
| __swap_writepage(folio, &wbc); | |
| folio_put(folio); | |
| return 0; | |
| } | |
| static int zswap_is_page_same_filled(void *ptr, unsigned long *value) | |
| { | |
| unsigned long *page; | |
| unsigned long val; | |
| unsigned int pos, last_pos = PAGE_SIZE / sizeof(*page) - 1; | |
| page = (unsigned long *)ptr; | |
| val = page[0]; | |
| if (val != page[last_pos]) | |
| return 0; | |
| for (pos = 1; pos < last_pos; pos++) { | |
| if (val != page[pos]) | |
| return 0; | |
| } | |
| *value = val; | |
| return 1; | |
| } | |
| static void zswap_fill_page(void *ptr, unsigned long value) | |
| { | |
| unsigned long *page; | |
| page = (unsigned long *)ptr; | |
| memset_l(page, value, PAGE_SIZE / sizeof(unsigned long)); | |
| } | |
| bool zswap_store(struct folio *folio) | |
| { | |
| swp_entry_t swp = folio->swap; | |
| int type = swp_type(swp); | |
| pgoff_t offset = swp_offset(swp); | |
| struct page *page = &folio->page; | |
| struct zswap_tree *tree = zswap_trees[type]; | |
| struct zswap_entry *entry, *dupentry; | |
| struct scatterlist input, output; | |
| struct crypto_acomp_ctx *acomp_ctx; | |
| struct obj_cgroup *objcg = NULL; | |
| struct mem_cgroup *memcg = NULL; | |
| struct zswap_pool *pool; | |
| struct zpool *zpool; | |
| unsigned int dlen = PAGE_SIZE; | |
| unsigned long handle, value; | |
| char *buf; | |
| u8 *src, *dst; | |
| gfp_t gfp; | |
| int ret; | |
| VM_WARN_ON_ONCE(!folio_test_locked(folio)); | |
| VM_WARN_ON_ONCE(!folio_test_swapcache(folio)); | |
| /* Large folios aren't supported */ | |
| if (folio_test_large(folio)) | |
| return false; | |
| if (!zswap_enabled || !tree) | |
| return false; | |
| /* | |
| * If this is a duplicate, it must be removed before attempting to store | |
| * it, otherwise, if the store fails the old page won't be removed from | |
| * the tree, and it might be written back overriding the new data. | |
| */ | |
| spin_lock(&tree->lock); | |
| dupentry = zswap_rb_search(&tree->rbroot, offset); | |
| if (dupentry) { | |
| zswap_duplicate_entry++; | |
| zswap_invalidate_entry(tree, dupentry); | |
| } | |
| spin_unlock(&tree->lock); | |
| objcg = get_obj_cgroup_from_folio(folio); | |
| if (objcg && !obj_cgroup_may_zswap(objcg)) { | |
| memcg = get_mem_cgroup_from_objcg(objcg); | |
| if (shrink_memcg(memcg)) { | |
| mem_cgroup_put(memcg); | |
| goto reject; | |
| } | |
| mem_cgroup_put(memcg); | |
| } | |
| /* reclaim space if needed */ | |
| if (zswap_is_full()) { | |
| zswap_pool_limit_hit++; | |
| zswap_pool_reached_full = true; | |
| goto shrink; | |
| } | |
| if (zswap_pool_reached_full) { | |
| if (!zswap_can_accept()) | |
| goto shrink; | |
| else | |
| zswap_pool_reached_full = false; | |
| } | |
| /* allocate entry */ | |
| entry = zswap_entry_cache_alloc(GFP_KERNEL, page_to_nid(page)); | |
| if (!entry) { | |
| zswap_reject_kmemcache_fail++; | |
| goto reject; | |
| } | |
| if (zswap_same_filled_pages_enabled) { | |
| src = kmap_local_page(page); | |
| if (zswap_is_page_same_filled(src, &value)) { | |
| kunmap_local(src); | |
| entry->swpentry = swp_entry(type, offset); | |
| entry->length = 0; | |
| entry->value = value; | |
| atomic_inc(&zswap_same_filled_pages); | |
| goto insert_entry; | |
| } | |
| kunmap_local(src); | |
| } | |
| if (!zswap_non_same_filled_pages_enabled) | |
| goto freepage; | |
| /* if entry is successfully added, it keeps the reference */ | |
| entry->pool = zswap_pool_current_get(); | |
| if (!entry->pool) | |
| goto freepage; | |
| if (objcg) { | |
| memcg = get_mem_cgroup_from_objcg(objcg); | |
| if (memcg_list_lru_alloc(memcg, &entry->pool->list_lru, GFP_KERNEL)) { | |
| mem_cgroup_put(memcg); | |
| goto put_pool; | |
| } | |
| mem_cgroup_put(memcg); | |
| } | |
| /* compress */ | |
| acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx); | |
| mutex_lock(&acomp_ctx->mutex); | |
| dst = acomp_ctx->buffer; | |
| sg_init_table(&input, 1); | |
| sg_set_page(&input, &folio->page, PAGE_SIZE, 0); | |
| /* | |
| * We need PAGE_SIZE * 2 here since there maybe over-compression case, | |
| * and hardware-accelerators may won't check the dst buffer size, so | |
| * giving the dst buffer with enough length to avoid buffer overflow. | |
| */ | |
| sg_init_one(&output, dst, PAGE_SIZE * 2); | |
| acomp_request_set_params(acomp_ctx->req, &input, &output, PAGE_SIZE, dlen); | |
| /* | |
| * it maybe looks a little bit silly that we send an asynchronous request, | |
| * then wait for its completion synchronously. This makes the process look | |
| * synchronous in fact. | |
| * Theoretically, acomp supports users send multiple acomp requests in one | |
| * acomp instance, then get those requests done simultaneously. but in this | |
| * case, zswap actually does store and load page by page, there is no | |
| * existing method to send the second page before the first page is done | |
| * in one thread doing zwap. | |
| * but in different threads running on different cpu, we have different | |
| * acomp instance, so multiple threads can do (de)compression in parallel. | |
| */ | |
| ret = crypto_wait_req(crypto_acomp_compress(acomp_ctx->req), &acomp_ctx->wait); | |
| dlen = acomp_ctx->req->dlen; | |
| if (ret) { | |
| zswap_reject_compress_fail++; | |
| goto put_dstmem; | |
| } | |
| /* store */ | |
| zpool = zswap_find_zpool(entry); | |
| gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM; | |
| if (zpool_malloc_support_movable(zpool)) | |
| gfp |= __GFP_HIGHMEM | __GFP_MOVABLE; | |
| ret = zpool_malloc(zpool, dlen, gfp, &handle); | |
| if (ret == -ENOSPC) { | |
| zswap_reject_compress_poor++; | |
| goto put_dstmem; | |
| } | |
| if (ret) { | |
| zswap_reject_alloc_fail++; | |
| goto put_dstmem; | |
| } | |
| buf = zpool_map_handle(zpool, handle, ZPOOL_MM_WO); | |
| memcpy(buf, dst, dlen); | |
| zpool_unmap_handle(zpool, handle); | |
| mutex_unlock(&acomp_ctx->mutex); | |
| /* populate entry */ | |
| entry->swpentry = swp_entry(type, offset); | |
| entry->handle = handle; | |
| entry->length = dlen; | |
| insert_entry: | |
| entry->objcg = objcg; | |
| if (objcg) { | |
| obj_cgroup_charge_zswap(objcg, entry->length); | |
| /* Account before objcg ref is moved to tree */ | |
| count_objcg_event(objcg, ZSWPOUT); | |
| } | |
| /* map */ | |
| spin_lock(&tree->lock); | |
| /* | |
| * A duplicate entry should have been removed at the beginning of this | |
| * function. Since the swap entry should be pinned, if a duplicate is | |
| * found again here it means that something went wrong in the swap | |
| * cache. | |
| */ | |
| while (zswap_rb_insert(&tree->rbroot, entry, &dupentry) == -EEXIST) { | |
| WARN_ON(1); | |
| zswap_duplicate_entry++; | |
| zswap_invalidate_entry(tree, dupentry); | |
| } | |
| if (entry->length) { | |
| INIT_LIST_HEAD(&entry->lru); | |
| zswap_lru_add(&entry->pool->list_lru, entry); | |
| atomic_inc(&entry->pool->nr_stored); | |
| } | |
| spin_unlock(&tree->lock); | |
| /* update stats */ | |
| atomic_inc(&zswap_stored_pages); | |
| zswap_update_total_size(); | |
| count_vm_event(ZSWPOUT); | |
| return true; | |
| put_dstmem: | |
| mutex_unlock(&acomp_ctx->mutex); | |
| put_pool: | |
| zswap_pool_put(entry->pool); | |
| freepage: | |
| zswap_entry_cache_free(entry); | |
| reject: | |
| if (objcg) | |
| obj_cgroup_put(objcg); | |
| return false; | |
| shrink: | |
| pool = zswap_pool_last_get(); | |
| if (pool && !queue_work(shrink_wq, &pool->shrink_work)) | |
| zswap_pool_put(pool); | |
| goto reject; | |
| } | |
| bool zswap_load(struct folio *folio) | |
| { | |
| swp_entry_t swp = folio->swap; | |
| int type = swp_type(swp); | |
| pgoff_t offset = swp_offset(swp); | |
| struct page *page = &folio->page; | |
| struct zswap_tree *tree = zswap_trees[type]; | |
| struct zswap_entry *entry; | |
| u8 *dst; | |
| VM_WARN_ON_ONCE(!folio_test_locked(folio)); | |
| /* find */ | |
| spin_lock(&tree->lock); | |
| entry = zswap_entry_find_get(&tree->rbroot, offset); | |
| if (!entry) { | |
| spin_unlock(&tree->lock); | |
| return false; | |
| } | |
| spin_unlock(&tree->lock); | |
| if (entry->length) | |
| __zswap_load(entry, page); | |
| else { | |
| dst = kmap_local_page(page); | |
| zswap_fill_page(dst, entry->value); | |
| kunmap_local(dst); | |
| } | |
| count_vm_event(ZSWPIN); | |
| if (entry->objcg) | |
| count_objcg_event(entry->objcg, ZSWPIN); | |
| spin_lock(&tree->lock); | |
| if (zswap_exclusive_loads_enabled) { | |
| zswap_invalidate_entry(tree, entry); | |
| folio_mark_dirty(folio); | |
| } else if (entry->length) { | |
| zswap_lru_del(&entry->pool->list_lru, entry); | |
| zswap_lru_add(&entry->pool->list_lru, entry); | |
| } | |
| zswap_entry_put(tree, entry); | |
| spin_unlock(&tree->lock); | |
| return true; | |
| } | |
| void zswap_invalidate(int type, pgoff_t offset) | |
| { | |
| struct zswap_tree *tree = zswap_trees[type]; | |
| struct zswap_entry *entry; | |
| /* find */ | |
| spin_lock(&tree->lock); | |
| entry = zswap_rb_search(&tree->rbroot, offset); | |
| if (!entry) { | |
| /* entry was written back */ | |
| spin_unlock(&tree->lock); | |
| return; | |
| } | |
| zswap_invalidate_entry(tree, entry); | |
| spin_unlock(&tree->lock); | |
| } | |
| void zswap_swapon(int type) | |
| { | |
| struct zswap_tree *tree; | |
| tree = kzalloc(sizeof(*tree), GFP_KERNEL); | |
| if (!tree) { | |
| pr_err("alloc failed, zswap disabled for swap type %d\n", type); | |
| return; | |
| } | |
| tree->rbroot = RB_ROOT; | |
| spin_lock_init(&tree->lock); | |
| zswap_trees[type] = tree; | |
| } | |
| void zswap_swapoff(int type) | |
| { | |
| struct zswap_tree *tree = zswap_trees[type]; | |
| struct zswap_entry *entry, *n; | |
| if (!tree) | |
| return; | |
| /* walk the tree and free everything */ | |
| spin_lock(&tree->lock); | |
| rbtree_postorder_for_each_entry_safe(entry, n, &tree->rbroot, rbnode) | |
| zswap_free_entry(entry); | |
| tree->rbroot = RB_ROOT; | |
| spin_unlock(&tree->lock); | |
| kfree(tree); | |
| zswap_trees[type] = NULL; | |
| } | |
| /********************************* | |
| * debugfs functions | |
| **********************************/ | |
| #ifdef CONFIG_DEBUG_FS | |
| #include <linux/debugfs.h> | |
| static struct dentry *zswap_debugfs_root; | |
| static int zswap_debugfs_init(void) | |
| { | |
| if (!debugfs_initialized()) | |
| return -ENODEV; | |
| zswap_debugfs_root = debugfs_create_dir("zswap", NULL); | |
| debugfs_create_u64("pool_limit_hit", 0444, | |
| zswap_debugfs_root, &zswap_pool_limit_hit); | |
| debugfs_create_u64("reject_reclaim_fail", 0444, | |
| zswap_debugfs_root, &zswap_reject_reclaim_fail); | |
| debugfs_create_u64("reject_alloc_fail", 0444, | |
| zswap_debugfs_root, &zswap_reject_alloc_fail); | |
| debugfs_create_u64("reject_kmemcache_fail", 0444, | |
| zswap_debugfs_root, &zswap_reject_kmemcache_fail); | |
| debugfs_create_u64("reject_compress_fail", 0444, | |
| zswap_debugfs_root, &zswap_reject_compress_fail); | |
| debugfs_create_u64("reject_compress_poor", 0444, | |
| zswap_debugfs_root, &zswap_reject_compress_poor); | |
| debugfs_create_u64("written_back_pages", 0444, | |
| zswap_debugfs_root, &zswap_written_back_pages); | |
| debugfs_create_u64("duplicate_entry", 0444, | |
| zswap_debugfs_root, &zswap_duplicate_entry); | |
| debugfs_create_u64("pool_total_size", 0444, | |
| zswap_debugfs_root, &zswap_pool_total_size); | |
| debugfs_create_atomic_t("stored_pages", 0444, | |
| zswap_debugfs_root, &zswap_stored_pages); | |
| debugfs_create_atomic_t("same_filled_pages", 0444, | |
| zswap_debugfs_root, &zswap_same_filled_pages); | |
| return 0; | |
| } | |
| #else | |
| static int zswap_debugfs_init(void) | |
| { | |
| return 0; | |
| } | |
| #endif | |
| /********************************* | |
| * module init and exit | |
| **********************************/ | |
| static int zswap_setup(void) | |
| { | |
| struct zswap_pool *pool; | |
| int ret; | |
| zswap_entry_cache = KMEM_CACHE(zswap_entry, 0); | |
| if (!zswap_entry_cache) { | |
| pr_err("entry cache creation failed\n"); | |
| goto cache_fail; | |
| } | |
| ret = cpuhp_setup_state_multi(CPUHP_MM_ZSWP_POOL_PREPARE, | |
| "mm/zswap_pool:prepare", | |
| zswap_cpu_comp_prepare, | |
| zswap_cpu_comp_dead); | |
| if (ret) | |
| goto hp_fail; | |
| pool = __zswap_pool_create_fallback(); | |
| if (pool) { | |
| pr_info("loaded using pool %s/%s\n", pool->tfm_name, | |
| zpool_get_type(pool->zpools[0])); | |
| list_add(&pool->list, &zswap_pools); | |
| zswap_has_pool = true; | |
| } else { | |
| pr_err("pool creation failed\n"); | |
| zswap_enabled = false; | |
| } | |
| shrink_wq = create_workqueue("zswap-shrink"); | |
| if (!shrink_wq) | |
| goto fallback_fail; | |
| if (zswap_debugfs_init()) | |
| pr_warn("debugfs initialization failed\n"); | |
| zswap_init_state = ZSWAP_INIT_SUCCEED; | |
| return 0; | |
| fallback_fail: | |
| if (pool) | |
| zswap_pool_destroy(pool); | |
| hp_fail: | |
| kmem_cache_destroy(zswap_entry_cache); | |
| cache_fail: | |
| /* if built-in, we aren't unloaded on failure; don't allow use */ | |
| zswap_init_state = ZSWAP_INIT_FAILED; | |
| zswap_enabled = false; | |
| return -ENOMEM; | |
| } | |
| static int __init zswap_init(void) | |
| { | |
| if (!zswap_enabled) | |
| return 0; | |
| return zswap_setup(); | |
| } | |
| /* must be late so crypto has time to come up */ | |
| late_initcall(zswap_init); | |
| MODULE_AUTHOR("Seth Jennings <sjennings@variantweb.net>"); | |
| MODULE_DESCRIPTION("Compressed cache for swap pages"); |