| // SPDX-License-Identifier: GPL-2.0-only | |
| /* | |
| * Cryptographic API. | |
| * | |
| * Support for VIA PadLock hardware crypto engine. | |
| * | |
| * Copyright (c) 2004 Michal Ludvig <michal@logix.cz> | |
| * | |
| */ | |
| #include <crypto/algapi.h> | |
| #include <crypto/aes.h> | |
| #include <crypto/internal/skcipher.h> | |
| #include <crypto/padlock.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/types.h> | |
| #include <linux/errno.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/percpu.h> | |
| #include <linux/smp.h> | |
| #include <linux/slab.h> | |
| #include <asm/cpu_device_id.h> | |
| #include <asm/byteorder.h> | |
| #include <asm/processor.h> | |
| #include <asm/fpu/api.h> | |
| /* | |
| * Number of data blocks actually fetched for each xcrypt insn. | |
| * Processors with prefetch errata will fetch extra blocks. | |
| */ | |
| static unsigned int ecb_fetch_blocks = 2; | |
| #define MAX_ECB_FETCH_BLOCKS (8) | |
| #define ecb_fetch_bytes (ecb_fetch_blocks * AES_BLOCK_SIZE) | |
| static unsigned int cbc_fetch_blocks = 1; | |
| #define MAX_CBC_FETCH_BLOCKS (4) | |
| #define cbc_fetch_bytes (cbc_fetch_blocks * AES_BLOCK_SIZE) | |
| /* Control word. */ | |
| struct cword { | |
| unsigned int __attribute__ ((__packed__)) | |
| rounds:4, | |
| algo:3, | |
| keygen:1, | |
| interm:1, | |
| encdec:1, | |
| ksize:2; | |
| } __attribute__ ((__aligned__(PADLOCK_ALIGNMENT))); | |
| /* Whenever making any changes to the following | |
| * structure *make sure* you keep E, d_data | |
| * and cword aligned on 16 Bytes boundaries and | |
| * the Hardware can access 16 * 16 bytes of E and d_data | |
| * (only the first 15 * 16 bytes matter but the HW reads | |
| * more). | |
| */ | |
| struct aes_ctx { | |
| u32 E[AES_MAX_KEYLENGTH_U32] | |
| __attribute__ ((__aligned__(PADLOCK_ALIGNMENT))); | |
| u32 d_data[AES_MAX_KEYLENGTH_U32] | |
| __attribute__ ((__aligned__(PADLOCK_ALIGNMENT))); | |
| struct { | |
| struct cword encrypt; | |
| struct cword decrypt; | |
| } cword; | |
| u32 *D; | |
| }; | |
| static DEFINE_PER_CPU(struct cword *, paes_last_cword); | |
| /* Tells whether the ACE is capable to generate | |
| the extended key for a given key_len. */ | |
| static inline int | |
| aes_hw_extkey_available(uint8_t key_len) | |
| { | |
| /* TODO: We should check the actual CPU model/stepping | |
| as it's possible that the capability will be | |
| added in the next CPU revisions. */ | |
| if (key_len == 16) | |
| return 1; | |
| return 0; | |
| } | |
| static inline struct aes_ctx *aes_ctx_common(void *ctx) | |
| { | |
| unsigned long addr = (unsigned long)ctx; | |
| unsigned long align = PADLOCK_ALIGNMENT; | |
| if (align <= crypto_tfm_ctx_alignment()) | |
| align = 1; | |
| return (struct aes_ctx *)ALIGN(addr, align); | |
| } | |
| static inline struct aes_ctx *aes_ctx(struct crypto_tfm *tfm) | |
| { | |
| return aes_ctx_common(crypto_tfm_ctx(tfm)); | |
| } | |
| static inline struct aes_ctx *skcipher_aes_ctx(struct crypto_skcipher *tfm) | |
| { | |
| return aes_ctx_common(crypto_skcipher_ctx(tfm)); | |
| } | |
| static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, | |
| unsigned int key_len) | |
| { | |
| struct aes_ctx *ctx = aes_ctx(tfm); | |
| const __le32 *key = (const __le32 *)in_key; | |
| struct crypto_aes_ctx gen_aes; | |
| int cpu; | |
| if (key_len % 8) | |
| return -EINVAL; | |
| /* | |
| * If the hardware is capable of generating the extended key | |
| * itself we must supply the plain key for both encryption | |
| * and decryption. | |
| */ | |
| ctx->D = ctx->E; | |
| ctx->E[0] = le32_to_cpu(key[0]); | |
| ctx->E[1] = le32_to_cpu(key[1]); | |
| ctx->E[2] = le32_to_cpu(key[2]); | |
| ctx->E[3] = le32_to_cpu(key[3]); | |
| /* Prepare control words. */ | |
| memset(&ctx->cword, 0, sizeof(ctx->cword)); | |
| ctx->cword.decrypt.encdec = 1; | |
| ctx->cword.encrypt.rounds = 10 + (key_len - 16) / 4; | |
| ctx->cword.decrypt.rounds = ctx->cword.encrypt.rounds; | |
| ctx->cword.encrypt.ksize = (key_len - 16) / 8; | |
| ctx->cword.decrypt.ksize = ctx->cword.encrypt.ksize; | |
| /* Don't generate extended keys if the hardware can do it. */ | |
| if (aes_hw_extkey_available(key_len)) | |
| goto ok; | |
| ctx->D = ctx->d_data; | |
| ctx->cword.encrypt.keygen = 1; | |
| ctx->cword.decrypt.keygen = 1; | |
| if (aes_expandkey(&gen_aes, in_key, key_len)) | |
| return -EINVAL; | |
| memcpy(ctx->E, gen_aes.key_enc, AES_MAX_KEYLENGTH); | |
| memcpy(ctx->D, gen_aes.key_dec, AES_MAX_KEYLENGTH); | |
| ok: | |
| for_each_online_cpu(cpu) | |
| if (&ctx->cword.encrypt == per_cpu(paes_last_cword, cpu) || | |
| &ctx->cword.decrypt == per_cpu(paes_last_cword, cpu)) | |
| per_cpu(paes_last_cword, cpu) = NULL; | |
| return 0; | |
| } | |
| static int aes_set_key_skcipher(struct crypto_skcipher *tfm, const u8 *in_key, | |
| unsigned int key_len) | |
| { | |
| return aes_set_key(crypto_skcipher_tfm(tfm), in_key, key_len); | |
| } | |
| /* ====== Encryption/decryption routines ====== */ | |
| /* These are the real call to PadLock. */ | |
| static inline void padlock_reset_key(struct cword *cword) | |
| { | |
| int cpu = raw_smp_processor_id(); | |
| if (cword != per_cpu(paes_last_cword, cpu)) | |
| #ifndef CONFIG_X86_64 | |
| asm volatile ("pushfl; popfl"); | |
| #else | |
| asm volatile ("pushfq; popfq"); | |
| #endif | |
| } | |
| static inline void padlock_store_cword(struct cword *cword) | |
| { | |
| per_cpu(paes_last_cword, raw_smp_processor_id()) = cword; | |
| } | |
| /* | |
| * While the padlock instructions don't use FP/SSE registers, they | |
| * generate a spurious DNA fault when CR0.TS is '1'. Fortunately, | |
| * the kernel doesn't use CR0.TS. | |
| */ | |
| static inline void rep_xcrypt_ecb(const u8 *input, u8 *output, void *key, | |
| struct cword *control_word, int count) | |
| { | |
| asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */ | |
| : "+S"(input), "+D"(output) | |
| : "d"(control_word), "b"(key), "c"(count)); | |
| } | |
| static inline u8 *rep_xcrypt_cbc(const u8 *input, u8 *output, void *key, | |
| u8 *iv, struct cword *control_word, int count) | |
| { | |
| asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */ | |
| : "+S" (input), "+D" (output), "+a" (iv) | |
| : "d" (control_word), "b" (key), "c" (count)); | |
| return iv; | |
| } | |
| static void ecb_crypt_copy(const u8 *in, u8 *out, u32 *key, | |
| struct cword *cword, int count) | |
| { | |
| /* | |
| * Padlock prefetches extra data so we must provide mapped input buffers. | |
| * Assume there are at least 16 bytes of stack already in use. | |
| */ | |
| u8 buf[AES_BLOCK_SIZE * (MAX_ECB_FETCH_BLOCKS - 1) + PADLOCK_ALIGNMENT - 1]; | |
| u8 *tmp = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT); | |
| memcpy(tmp, in, count * AES_BLOCK_SIZE); | |
| rep_xcrypt_ecb(tmp, out, key, cword, count); | |
| } | |
| static u8 *cbc_crypt_copy(const u8 *in, u8 *out, u32 *key, | |
| u8 *iv, struct cword *cword, int count) | |
| { | |
| /* | |
| * Padlock prefetches extra data so we must provide mapped input buffers. | |
| * Assume there are at least 16 bytes of stack already in use. | |
| */ | |
| u8 buf[AES_BLOCK_SIZE * (MAX_CBC_FETCH_BLOCKS - 1) + PADLOCK_ALIGNMENT - 1]; | |
| u8 *tmp = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT); | |
| memcpy(tmp, in, count * AES_BLOCK_SIZE); | |
| return rep_xcrypt_cbc(tmp, out, key, iv, cword, count); | |
| } | |
| static inline void ecb_crypt(const u8 *in, u8 *out, u32 *key, | |
| struct cword *cword, int count) | |
| { | |
| /* Padlock in ECB mode fetches at least ecb_fetch_bytes of data. | |
| * We could avoid some copying here but it's probably not worth it. | |
| */ | |
| if (unlikely(offset_in_page(in) + ecb_fetch_bytes > PAGE_SIZE)) { | |
| ecb_crypt_copy(in, out, key, cword, count); | |
| return; | |
| } | |
| rep_xcrypt_ecb(in, out, key, cword, count); | |
| } | |
| static inline u8 *cbc_crypt(const u8 *in, u8 *out, u32 *key, | |
| u8 *iv, struct cword *cword, int count) | |
| { | |
| /* Padlock in CBC mode fetches at least cbc_fetch_bytes of data. */ | |
| if (unlikely(offset_in_page(in) + cbc_fetch_bytes > PAGE_SIZE)) | |
| return cbc_crypt_copy(in, out, key, iv, cword, count); | |
| return rep_xcrypt_cbc(in, out, key, iv, cword, count); | |
| } | |
| static inline void padlock_xcrypt_ecb(const u8 *input, u8 *output, void *key, | |
| void *control_word, u32 count) | |
| { | |
| u32 initial = count & (ecb_fetch_blocks - 1); | |
| if (count < ecb_fetch_blocks) { | |
| ecb_crypt(input, output, key, control_word, count); | |
| return; | |
| } | |
| count -= initial; | |
| if (initial) | |
| asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */ | |
| : "+S"(input), "+D"(output) | |
| : "d"(control_word), "b"(key), "c"(initial)); | |
| asm volatile (".byte 0xf3,0x0f,0xa7,0xc8" /* rep xcryptecb */ | |
| : "+S"(input), "+D"(output) | |
| : "d"(control_word), "b"(key), "c"(count)); | |
| } | |
| static inline u8 *padlock_xcrypt_cbc(const u8 *input, u8 *output, void *key, | |
| u8 *iv, void *control_word, u32 count) | |
| { | |
| u32 initial = count & (cbc_fetch_blocks - 1); | |
| if (count < cbc_fetch_blocks) | |
| return cbc_crypt(input, output, key, iv, control_word, count); | |
| count -= initial; | |
| if (initial) | |
| asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */ | |
| : "+S" (input), "+D" (output), "+a" (iv) | |
| : "d" (control_word), "b" (key), "c" (initial)); | |
| asm volatile (".byte 0xf3,0x0f,0xa7,0xd0" /* rep xcryptcbc */ | |
| : "+S" (input), "+D" (output), "+a" (iv) | |
| : "d" (control_word), "b" (key), "c" (count)); | |
| return iv; | |
| } | |
| static void padlock_aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) | |
| { | |
| struct aes_ctx *ctx = aes_ctx(tfm); | |
| padlock_reset_key(&ctx->cword.encrypt); | |
| ecb_crypt(in, out, ctx->E, &ctx->cword.encrypt, 1); | |
| padlock_store_cword(&ctx->cword.encrypt); | |
| } | |
| static void padlock_aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) | |
| { | |
| struct aes_ctx *ctx = aes_ctx(tfm); | |
| padlock_reset_key(&ctx->cword.encrypt); | |
| ecb_crypt(in, out, ctx->D, &ctx->cword.decrypt, 1); | |
| padlock_store_cword(&ctx->cword.encrypt); | |
| } | |
| static struct crypto_alg aes_alg = { | |
| .cra_name = "aes", | |
| .cra_driver_name = "aes-padlock", | |
| .cra_priority = PADLOCK_CRA_PRIORITY, | |
| .cra_flags = CRYPTO_ALG_TYPE_CIPHER, | |
| .cra_blocksize = AES_BLOCK_SIZE, | |
| .cra_ctxsize = sizeof(struct aes_ctx), | |
| .cra_alignmask = PADLOCK_ALIGNMENT - 1, | |
| .cra_module = THIS_MODULE, | |
| .cra_u = { | |
| .cipher = { | |
| .cia_min_keysize = AES_MIN_KEY_SIZE, | |
| .cia_max_keysize = AES_MAX_KEY_SIZE, | |
| .cia_setkey = aes_set_key, | |
| .cia_encrypt = padlock_aes_encrypt, | |
| .cia_decrypt = padlock_aes_decrypt, | |
| } | |
| } | |
| }; | |
| static int ecb_aes_encrypt(struct skcipher_request *req) | |
| { | |
| struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); | |
| struct aes_ctx *ctx = skcipher_aes_ctx(tfm); | |
| struct skcipher_walk walk; | |
| unsigned int nbytes; | |
| int err; | |
| padlock_reset_key(&ctx->cword.encrypt); | |
| err = skcipher_walk_virt(&walk, req, false); | |
| while ((nbytes = walk.nbytes) != 0) { | |
| padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr, | |
| ctx->E, &ctx->cword.encrypt, | |
| nbytes / AES_BLOCK_SIZE); | |
| nbytes &= AES_BLOCK_SIZE - 1; | |
| err = skcipher_walk_done(&walk, nbytes); | |
| } | |
| padlock_store_cword(&ctx->cword.encrypt); | |
| return err; | |
| } | |
| static int ecb_aes_decrypt(struct skcipher_request *req) | |
| { | |
| struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); | |
| struct aes_ctx *ctx = skcipher_aes_ctx(tfm); | |
| struct skcipher_walk walk; | |
| unsigned int nbytes; | |
| int err; | |
| padlock_reset_key(&ctx->cword.decrypt); | |
| err = skcipher_walk_virt(&walk, req, false); | |
| while ((nbytes = walk.nbytes) != 0) { | |
| padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr, | |
| ctx->D, &ctx->cword.decrypt, | |
| nbytes / AES_BLOCK_SIZE); | |
| nbytes &= AES_BLOCK_SIZE - 1; | |
| err = skcipher_walk_done(&walk, nbytes); | |
| } | |
| padlock_store_cword(&ctx->cword.encrypt); | |
| return err; | |
| } | |
| static struct skcipher_alg ecb_aes_alg = { | |
| .base.cra_name = "ecb(aes)", | |
| .base.cra_driver_name = "ecb-aes-padlock", | |
| .base.cra_priority = PADLOCK_COMPOSITE_PRIORITY, | |
| .base.cra_blocksize = AES_BLOCK_SIZE, | |
| .base.cra_ctxsize = sizeof(struct aes_ctx), | |
| .base.cra_alignmask = PADLOCK_ALIGNMENT - 1, | |
| .base.cra_module = THIS_MODULE, | |
| .min_keysize = AES_MIN_KEY_SIZE, | |
| .max_keysize = AES_MAX_KEY_SIZE, | |
| .setkey = aes_set_key_skcipher, | |
| .encrypt = ecb_aes_encrypt, | |
| .decrypt = ecb_aes_decrypt, | |
| }; | |
| static int cbc_aes_encrypt(struct skcipher_request *req) | |
| { | |
| struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); | |
| struct aes_ctx *ctx = skcipher_aes_ctx(tfm); | |
| struct skcipher_walk walk; | |
| unsigned int nbytes; | |
| int err; | |
| padlock_reset_key(&ctx->cword.encrypt); | |
| err = skcipher_walk_virt(&walk, req, false); | |
| while ((nbytes = walk.nbytes) != 0) { | |
| u8 *iv = padlock_xcrypt_cbc(walk.src.virt.addr, | |
| walk.dst.virt.addr, ctx->E, | |
| walk.iv, &ctx->cword.encrypt, | |
| nbytes / AES_BLOCK_SIZE); | |
| memcpy(walk.iv, iv, AES_BLOCK_SIZE); | |
| nbytes &= AES_BLOCK_SIZE - 1; | |
| err = skcipher_walk_done(&walk, nbytes); | |
| } | |
| padlock_store_cword(&ctx->cword.decrypt); | |
| return err; | |
| } | |
| static int cbc_aes_decrypt(struct skcipher_request *req) | |
| { | |
| struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req); | |
| struct aes_ctx *ctx = skcipher_aes_ctx(tfm); | |
| struct skcipher_walk walk; | |
| unsigned int nbytes; | |
| int err; | |
| padlock_reset_key(&ctx->cword.encrypt); | |
| err = skcipher_walk_virt(&walk, req, false); | |
| while ((nbytes = walk.nbytes) != 0) { | |
| padlock_xcrypt_cbc(walk.src.virt.addr, walk.dst.virt.addr, | |
| ctx->D, walk.iv, &ctx->cword.decrypt, | |
| nbytes / AES_BLOCK_SIZE); | |
| nbytes &= AES_BLOCK_SIZE - 1; | |
| err = skcipher_walk_done(&walk, nbytes); | |
| } | |
| padlock_store_cword(&ctx->cword.encrypt); | |
| return err; | |
| } | |
| static struct skcipher_alg cbc_aes_alg = { | |
| .base.cra_name = "cbc(aes)", | |
| .base.cra_driver_name = "cbc-aes-padlock", | |
| .base.cra_priority = PADLOCK_COMPOSITE_PRIORITY, | |
| .base.cra_blocksize = AES_BLOCK_SIZE, | |
| .base.cra_ctxsize = sizeof(struct aes_ctx), | |
| .base.cra_alignmask = PADLOCK_ALIGNMENT - 1, | |
| .base.cra_module = THIS_MODULE, | |
| .min_keysize = AES_MIN_KEY_SIZE, | |
| .max_keysize = AES_MAX_KEY_SIZE, | |
| .ivsize = AES_BLOCK_SIZE, | |
| .setkey = aes_set_key_skcipher, | |
| .encrypt = cbc_aes_encrypt, | |
| .decrypt = cbc_aes_decrypt, | |
| }; | |
| static const struct x86_cpu_id padlock_cpu_id[] = { | |
| X86_MATCH_FEATURE(X86_FEATURE_XCRYPT, NULL), | |
| {} | |
| }; | |
| MODULE_DEVICE_TABLE(x86cpu, padlock_cpu_id); | |
| static int __init padlock_init(void) | |
| { | |
| int ret; | |
| struct cpuinfo_x86 *c = &cpu_data(0); | |
| if (!x86_match_cpu(padlock_cpu_id)) | |
| return -ENODEV; | |
| if (!boot_cpu_has(X86_FEATURE_XCRYPT_EN)) { | |
| printk(KERN_NOTICE PFX "VIA PadLock detected, but not enabled. Hmm, strange...\n"); | |
| return -ENODEV; | |
| } | |
| if ((ret = crypto_register_alg(&aes_alg)) != 0) | |
| goto aes_err; | |
| if ((ret = crypto_register_skcipher(&ecb_aes_alg)) != 0) | |
| goto ecb_aes_err; | |
| if ((ret = crypto_register_skcipher(&cbc_aes_alg)) != 0) | |
| goto cbc_aes_err; | |
| printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n"); | |
| if (c->x86 == 6 && c->x86_model == 15 && c->x86_stepping == 2) { | |
| ecb_fetch_blocks = MAX_ECB_FETCH_BLOCKS; | |
| cbc_fetch_blocks = MAX_CBC_FETCH_BLOCKS; | |
| printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n"); | |
| } | |
| out: | |
| return ret; | |
| cbc_aes_err: | |
| crypto_unregister_skcipher(&ecb_aes_alg); | |
| ecb_aes_err: | |
| crypto_unregister_alg(&aes_alg); | |
| aes_err: | |
| printk(KERN_ERR PFX "VIA PadLock AES initialization failed.\n"); | |
| goto out; | |
| } | |
| static void __exit padlock_fini(void) | |
| { | |
| crypto_unregister_skcipher(&cbc_aes_alg); | |
| crypto_unregister_skcipher(&ecb_aes_alg); | |
| crypto_unregister_alg(&aes_alg); | |
| } | |
| module_init(padlock_init); | |
| module_exit(padlock_fini); | |
| MODULE_DESCRIPTION("VIA PadLock AES algorithm support"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("Michal Ludvig"); | |
| MODULE_ALIAS_CRYPTO("aes"); |