| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * ILITEK Touch IC driver for 23XX, 25XX and Lego series | |
| * | |
| * Copyright (C) 2011 ILI Technology Corporation. | |
| * Copyright (C) 2020 Luca Hsu <luca_hsu@ilitek.com> | |
| * Copyright (C) 2021 Joe Hung <joe_hung@ilitek.com> | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/input.h> | |
| #include <linux/input/mt.h> | |
| #include <linux/i2c.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/gpio/consumer.h> | |
| #include <linux/errno.h> | |
| #include <linux/acpi.h> | |
| #include <linux/input/touchscreen.h> | |
| #include <linux/unaligned.h> | |
| #define ILITEK_TS_NAME "ilitek_ts" | |
| #define BL_V1_8 0x108 | |
| #define BL_V1_7 0x107 | |
| #define BL_V1_6 0x106 | |
| #define ILITEK_TP_CMD_GET_TP_RES 0x20 | |
| #define ILITEK_TP_CMD_GET_SCRN_RES 0x21 | |
| #define ILITEK_TP_CMD_SET_IC_SLEEP 0x30 | |
| #define ILITEK_TP_CMD_SET_IC_WAKE 0x31 | |
| #define ILITEK_TP_CMD_GET_FW_VER 0x40 | |
| #define ILITEK_TP_CMD_GET_PRL_VER 0x42 | |
| #define ILITEK_TP_CMD_GET_MCU_VER 0x61 | |
| #define ILITEK_TP_CMD_GET_IC_MODE 0xC0 | |
| #define ILITEK_TP_I2C_REPORT_ID 0x48 | |
| #define REPORT_COUNT_ADDRESS 61 | |
| #define ILITEK_SUPPORT_MAX_POINT 40 | |
| struct ilitek_protocol_info { | |
| u16 ver; | |
| u8 ver_major; | |
| }; | |
| struct ilitek_ts_data { | |
| struct i2c_client *client; | |
| struct gpio_desc *reset_gpio; | |
| struct input_dev *input_dev; | |
| struct touchscreen_properties prop; | |
| const struct ilitek_protocol_map *ptl_cb_func; | |
| struct ilitek_protocol_info ptl; | |
| char product_id[30]; | |
| u16 mcu_ver; | |
| u8 ic_mode; | |
| u8 firmware_ver[8]; | |
| s32 reset_time; | |
| s32 screen_max_x; | |
| s32 screen_max_y; | |
| s32 screen_min_x; | |
| s32 screen_min_y; | |
| s32 max_tp; | |
| }; | |
| struct ilitek_protocol_map { | |
| u16 cmd; | |
| const char *name; | |
| int (*func)(struct ilitek_ts_data *ts, u16 cmd, u8 *inbuf, u8 *outbuf); | |
| }; | |
| enum ilitek_cmds { | |
| /* common cmds */ | |
| GET_PTL_VER = 0, | |
| GET_FW_VER, | |
| GET_SCRN_RES, | |
| GET_TP_RES, | |
| GET_IC_MODE, | |
| GET_MCU_VER, | |
| SET_IC_SLEEP, | |
| SET_IC_WAKE, | |
| /* ALWAYS keep at the end */ | |
| MAX_CMD_CNT | |
| }; | |
| /* ILITEK I2C R/W APIs */ | |
| static int ilitek_i2c_write_and_read(struct ilitek_ts_data *ts, | |
| u8 *cmd, int write_len, int delay, | |
| u8 *data, int read_len) | |
| { | |
| int error; | |
| struct i2c_client *client = ts->client; | |
| struct i2c_msg msgs[] = { | |
| { | |
| .addr = client->addr, | |
| .flags = 0, | |
| .len = write_len, | |
| .buf = cmd, | |
| }, | |
| { | |
| .addr = client->addr, | |
| .flags = I2C_M_RD, | |
| .len = read_len, | |
| .buf = data, | |
| }, | |
| }; | |
| if (delay == 0 && write_len > 0 && read_len > 0) { | |
| error = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); | |
| if (error < 0) | |
| return error; | |
| } else { | |
| if (write_len > 0) { | |
| error = i2c_transfer(client->adapter, msgs, 1); | |
| if (error < 0) | |
| return error; | |
| } | |
| if (delay > 0) | |
| mdelay(delay); | |
| if (read_len > 0) { | |
| error = i2c_transfer(client->adapter, msgs + 1, 1); | |
| if (error < 0) | |
| return error; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* ILITEK ISR APIs */ | |
| static void ilitek_touch_down(struct ilitek_ts_data *ts, unsigned int id, | |
| unsigned int x, unsigned int y) | |
| { | |
| struct input_dev *input = ts->input_dev; | |
| input_mt_slot(input, id); | |
| input_mt_report_slot_state(input, MT_TOOL_FINGER, true); | |
| touchscreen_report_pos(input, &ts->prop, x, y, true); | |
| } | |
| static int ilitek_process_and_report_v6(struct ilitek_ts_data *ts) | |
| { | |
| int error = 0; | |
| u8 buf[512]; | |
| int packet_len = 5; | |
| int packet_max_point = 10; | |
| int report_max_point; | |
| int i, count; | |
| struct input_dev *input = ts->input_dev; | |
| struct device *dev = &ts->client->dev; | |
| unsigned int x, y, status, id; | |
| error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, buf, 64); | |
| if (error) { | |
| dev_err(dev, "get touch info failed, err:%d\n", error); | |
| return error; | |
| } | |
| if (buf[0] != ILITEK_TP_I2C_REPORT_ID) { | |
| dev_err(dev, "get touch info failed. Wrong id: 0x%02X\n", buf[0]); | |
| return -EINVAL; | |
| } | |
| report_max_point = buf[REPORT_COUNT_ADDRESS]; | |
| if (report_max_point > ts->max_tp) { | |
| dev_err(dev, "FW report max point:%d > panel info. max:%d\n", | |
| report_max_point, ts->max_tp); | |
| return -EINVAL; | |
| } | |
| count = DIV_ROUND_UP(report_max_point, packet_max_point); | |
| for (i = 1; i < count; i++) { | |
| error = ilitek_i2c_write_and_read(ts, NULL, 0, 0, | |
| buf + i * 64, 64); | |
| if (error) { | |
| dev_err(dev, "get touch info. failed, cnt:%d, err:%d\n", | |
| count, error); | |
| return error; | |
| } | |
| } | |
| for (i = 0; i < report_max_point; i++) { | |
| status = buf[i * packet_len + 1] & 0x40; | |
| if (!status) | |
| continue; | |
| id = buf[i * packet_len + 1] & 0x3F; | |
| x = get_unaligned_le16(buf + i * packet_len + 2); | |
| y = get_unaligned_le16(buf + i * packet_len + 4); | |
| if (x > ts->screen_max_x || x < ts->screen_min_x || | |
| y > ts->screen_max_y || y < ts->screen_min_y) { | |
| dev_warn(dev, "invalid position, X[%d,%u,%d], Y[%d,%u,%d]\n", | |
| ts->screen_min_x, x, ts->screen_max_x, | |
| ts->screen_min_y, y, ts->screen_max_y); | |
| continue; | |
| } | |
| ilitek_touch_down(ts, id, x, y); | |
| } | |
| input_mt_sync_frame(input); | |
| input_sync(input); | |
| return 0; | |
| } | |
| /* APIs of cmds for ILITEK Touch IC */ | |
| static int api_protocol_set_cmd(struct ilitek_ts_data *ts, | |
| u16 idx, u8 *inbuf, u8 *outbuf) | |
| { | |
| u16 cmd; | |
| int error; | |
| if (idx >= MAX_CMD_CNT) | |
| return -EINVAL; | |
| cmd = ts->ptl_cb_func[idx].cmd; | |
| error = ts->ptl_cb_func[idx].func(ts, cmd, inbuf, outbuf); | |
| if (error) | |
| return error; | |
| return 0; | |
| } | |
| static int api_protocol_get_ptl_ver(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| int error; | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 3); | |
| if (error) | |
| return error; | |
| ts->ptl.ver = get_unaligned_be16(outbuf); | |
| ts->ptl.ver_major = outbuf[0]; | |
| return 0; | |
| } | |
| static int api_protocol_get_mcu_ver(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| int error; | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 32); | |
| if (error) | |
| return error; | |
| ts->mcu_ver = get_unaligned_le16(outbuf); | |
| memset(ts->product_id, 0, sizeof(ts->product_id)); | |
| memcpy(ts->product_id, outbuf + 6, 26); | |
| return 0; | |
| } | |
| static int api_protocol_get_fw_ver(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| int error; | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8); | |
| if (error) | |
| return error; | |
| memcpy(ts->firmware_ver, outbuf, 8); | |
| return 0; | |
| } | |
| static int api_protocol_get_scrn_res(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| int error; | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 8); | |
| if (error) | |
| return error; | |
| ts->screen_min_x = get_unaligned_le16(outbuf); | |
| ts->screen_min_y = get_unaligned_le16(outbuf + 2); | |
| ts->screen_max_x = get_unaligned_le16(outbuf + 4); | |
| ts->screen_max_y = get_unaligned_le16(outbuf + 6); | |
| return 0; | |
| } | |
| static int api_protocol_get_tp_res(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| int error; | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 15); | |
| if (error) | |
| return error; | |
| ts->max_tp = outbuf[8]; | |
| if (ts->max_tp > ILITEK_SUPPORT_MAX_POINT) { | |
| dev_err(&ts->client->dev, "Invalid MAX_TP:%d from FW\n", | |
| ts->max_tp); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int api_protocol_get_ic_mode(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| int error; | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| error = ilitek_i2c_write_and_read(ts, buf, 1, 5, outbuf, 2); | |
| if (error) | |
| return error; | |
| ts->ic_mode = outbuf[0]; | |
| return 0; | |
| } | |
| static int api_protocol_set_ic_sleep(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0); | |
| } | |
| static int api_protocol_set_ic_wake(struct ilitek_ts_data *ts, | |
| u16 cmd, u8 *inbuf, u8 *outbuf) | |
| { | |
| u8 buf[64]; | |
| buf[0] = cmd; | |
| return ilitek_i2c_write_and_read(ts, buf, 1, 0, NULL, 0); | |
| } | |
| static const struct ilitek_protocol_map ptl_func_map[] = { | |
| /* common cmds */ | |
| [GET_PTL_VER] = { | |
| ILITEK_TP_CMD_GET_PRL_VER, "GET_PTL_VER", | |
| api_protocol_get_ptl_ver | |
| }, | |
| [GET_FW_VER] = { | |
| ILITEK_TP_CMD_GET_FW_VER, "GET_FW_VER", | |
| api_protocol_get_fw_ver | |
| }, | |
| [GET_SCRN_RES] = { | |
| ILITEK_TP_CMD_GET_SCRN_RES, "GET_SCRN_RES", | |
| api_protocol_get_scrn_res | |
| }, | |
| [GET_TP_RES] = { | |
| ILITEK_TP_CMD_GET_TP_RES, "GET_TP_RES", | |
| api_protocol_get_tp_res | |
| }, | |
| [GET_IC_MODE] = { | |
| ILITEK_TP_CMD_GET_IC_MODE, "GET_IC_MODE", | |
| api_protocol_get_ic_mode | |
| }, | |
| [GET_MCU_VER] = { | |
| ILITEK_TP_CMD_GET_MCU_VER, "GET_MOD_VER", | |
| api_protocol_get_mcu_ver | |
| }, | |
| [SET_IC_SLEEP] = { | |
| ILITEK_TP_CMD_SET_IC_SLEEP, "SET_IC_SLEEP", | |
| api_protocol_set_ic_sleep | |
| }, | |
| [SET_IC_WAKE] = { | |
| ILITEK_TP_CMD_SET_IC_WAKE, "SET_IC_WAKE", | |
| api_protocol_set_ic_wake | |
| }, | |
| }; | |
| /* Probe APIs */ | |
| static void ilitek_reset(struct ilitek_ts_data *ts, int delay) | |
| { | |
| if (ts->reset_gpio) { | |
| gpiod_set_value(ts->reset_gpio, 1); | |
| mdelay(10); | |
| gpiod_set_value(ts->reset_gpio, 0); | |
| mdelay(delay); | |
| } | |
| } | |
| static int ilitek_protocol_init(struct ilitek_ts_data *ts) | |
| { | |
| int error; | |
| u8 outbuf[64]; | |
| ts->ptl_cb_func = ptl_func_map; | |
| ts->reset_time = 600; | |
| error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf); | |
| if (error) | |
| return error; | |
| /* Protocol v3 is not support currently */ | |
| if (ts->ptl.ver_major == 0x3 || | |
| ts->ptl.ver == BL_V1_6 || | |
| ts->ptl.ver == BL_V1_7) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int ilitek_read_tp_info(struct ilitek_ts_data *ts, bool boot) | |
| { | |
| u8 outbuf[256]; | |
| int error; | |
| error = api_protocol_set_cmd(ts, GET_PTL_VER, NULL, outbuf); | |
| if (error) | |
| return error; | |
| error = api_protocol_set_cmd(ts, GET_MCU_VER, NULL, outbuf); | |
| if (error) | |
| return error; | |
| error = api_protocol_set_cmd(ts, GET_FW_VER, NULL, outbuf); | |
| if (error) | |
| return error; | |
| if (boot) { | |
| error = api_protocol_set_cmd(ts, GET_SCRN_RES, NULL, | |
| outbuf); | |
| if (error) | |
| return error; | |
| } | |
| error = api_protocol_set_cmd(ts, GET_TP_RES, NULL, outbuf); | |
| if (error) | |
| return error; | |
| error = api_protocol_set_cmd(ts, GET_IC_MODE, NULL, outbuf); | |
| if (error) | |
| return error; | |
| return 0; | |
| } | |
| static int ilitek_input_dev_init(struct device *dev, struct ilitek_ts_data *ts) | |
| { | |
| int error; | |
| struct input_dev *input; | |
| input = devm_input_allocate_device(dev); | |
| if (!input) | |
| return -ENOMEM; | |
| ts->input_dev = input; | |
| input->name = ILITEK_TS_NAME; | |
| input->id.bustype = BUS_I2C; | |
| __set_bit(INPUT_PROP_DIRECT, input->propbit); | |
| input_set_abs_params(input, ABS_MT_POSITION_X, | |
| ts->screen_min_x, ts->screen_max_x, 0, 0); | |
| input_set_abs_params(input, ABS_MT_POSITION_Y, | |
| ts->screen_min_y, ts->screen_max_y, 0, 0); | |
| touchscreen_parse_properties(input, true, &ts->prop); | |
| error = input_mt_init_slots(input, ts->max_tp, | |
| INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); | |
| if (error) { | |
| dev_err(dev, "initialize MT slots failed, err:%d\n", error); | |
| return error; | |
| } | |
| error = input_register_device(input); | |
| if (error) { | |
| dev_err(dev, "register input device failed, err:%d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static irqreturn_t ilitek_i2c_isr(int irq, void *dev_id) | |
| { | |
| struct ilitek_ts_data *ts = dev_id; | |
| int error; | |
| error = ilitek_process_and_report_v6(ts); | |
| if (error < 0) { | |
| dev_err(&ts->client->dev, "[%s] err:%d\n", __func__, error); | |
| return IRQ_NONE; | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static ssize_t firmware_version_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); | |
| return sysfs_emit(buf, | |
| "fw version: [%02X%02X.%02X%02X.%02X%02X.%02X%02X]\n", | |
| ts->firmware_ver[0], ts->firmware_ver[1], | |
| ts->firmware_ver[2], ts->firmware_ver[3], | |
| ts->firmware_ver[4], ts->firmware_ver[5], | |
| ts->firmware_ver[6], ts->firmware_ver[7]); | |
| } | |
| static DEVICE_ATTR_RO(firmware_version); | |
| static ssize_t product_id_show(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); | |
| return sysfs_emit(buf, "product id: [%04X], module: [%s]\n", | |
| ts->mcu_ver, ts->product_id); | |
| } | |
| static DEVICE_ATTR_RO(product_id); | |
| static struct attribute *ilitek_sysfs_attrs[] = { | |
| &dev_attr_firmware_version.attr, | |
| &dev_attr_product_id.attr, | |
| NULL | |
| }; | |
| ATTRIBUTE_GROUPS(ilitek_sysfs); | |
| static int ilitek_ts_i2c_probe(struct i2c_client *client) | |
| { | |
| struct ilitek_ts_data *ts; | |
| struct device *dev = &client->dev; | |
| int error; | |
| if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { | |
| dev_err(dev, "i2c check functionality failed\n"); | |
| return -ENXIO; | |
| } | |
| ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL); | |
| if (!ts) | |
| return -ENOMEM; | |
| ts->client = client; | |
| i2c_set_clientdata(client, ts); | |
| ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); | |
| if (IS_ERR(ts->reset_gpio)) { | |
| error = PTR_ERR(ts->reset_gpio); | |
| dev_err(dev, "request gpiod failed: %d", error); | |
| return error; | |
| } | |
| ilitek_reset(ts, 1000); | |
| error = ilitek_protocol_init(ts); | |
| if (error) { | |
| dev_err(dev, "protocol init failed: %d", error); | |
| return error; | |
| } | |
| error = ilitek_read_tp_info(ts, true); | |
| if (error) { | |
| dev_err(dev, "read tp info failed: %d", error); | |
| return error; | |
| } | |
| error = ilitek_input_dev_init(dev, ts); | |
| if (error) { | |
| dev_err(dev, "input dev init failed: %d", error); | |
| return error; | |
| } | |
| error = devm_request_threaded_irq(dev, ts->client->irq, | |
| NULL, ilitek_i2c_isr, IRQF_ONESHOT, | |
| "ilitek_touch_irq", ts); | |
| if (error) { | |
| dev_err(dev, "request threaded irq failed: %d\n", error); | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int ilitek_suspend(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); | |
| int error; | |
| disable_irq(client->irq); | |
| if (!device_may_wakeup(dev)) { | |
| error = api_protocol_set_cmd(ts, SET_IC_SLEEP, NULL, NULL); | |
| if (error) | |
| return error; | |
| } | |
| return 0; | |
| } | |
| static int ilitek_resume(struct device *dev) | |
| { | |
| struct i2c_client *client = to_i2c_client(dev); | |
| struct ilitek_ts_data *ts = i2c_get_clientdata(client); | |
| int error; | |
| if (!device_may_wakeup(dev)) { | |
| error = api_protocol_set_cmd(ts, SET_IC_WAKE, NULL, NULL); | |
| if (error) | |
| return error; | |
| ilitek_reset(ts, ts->reset_time); | |
| } | |
| enable_irq(client->irq); | |
| return 0; | |
| } | |
| static DEFINE_SIMPLE_DEV_PM_OPS(ilitek_pm_ops, ilitek_suspend, ilitek_resume); | |
| static const struct i2c_device_id ilitek_ts_i2c_id[] = { | |
| { ILITEK_TS_NAME }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, ilitek_ts_i2c_id); | |
| #ifdef CONFIG_ACPI | |
| static const struct acpi_device_id ilitekts_acpi_id[] = { | |
| { "ILTK0001", 0 }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(acpi, ilitekts_acpi_id); | |
| #endif | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id ilitek_ts_i2c_match[] = { | |
| {.compatible = "ilitek,ili2130",}, | |
| {.compatible = "ilitek,ili2131",}, | |
| {.compatible = "ilitek,ili2132",}, | |
| {.compatible = "ilitek,ili2316",}, | |
| {.compatible = "ilitek,ili2322",}, | |
| {.compatible = "ilitek,ili2323",}, | |
| {.compatible = "ilitek,ili2326",}, | |
| {.compatible = "ilitek,ili2520",}, | |
| {.compatible = "ilitek,ili2521",}, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, ilitek_ts_i2c_match); | |
| #endif | |
| static struct i2c_driver ilitek_ts_i2c_driver = { | |
| .driver = { | |
| .name = ILITEK_TS_NAME, | |
| .dev_groups = ilitek_sysfs_groups, | |
| .pm = pm_sleep_ptr(&ilitek_pm_ops), | |
| .of_match_table = of_match_ptr(ilitek_ts_i2c_match), | |
| .acpi_match_table = ACPI_PTR(ilitekts_acpi_id), | |
| }, | |
| .probe = ilitek_ts_i2c_probe, | |
| .id_table = ilitek_ts_i2c_id, | |
| }; | |
| module_i2c_driver(ilitek_ts_i2c_driver); | |
| MODULE_AUTHOR("ILITEK"); | |
| MODULE_DESCRIPTION("ILITEK I2C Touchscreen Driver"); | |
| MODULE_LICENSE("GPL"); |